linux/drivers/scsi/libsas/sas_dump.c
James Bottomley 2908d778ab [SCSI] aic94xx: new driver
This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 09:52:29 -05:00

77 lines
2.3 KiB
C

/*
* Serial Attached SCSI (SAS) Dump/Debugging routines
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_dump.h"
#ifdef SAS_DEBUG
static const char *sas_hae_str[] = {
[0] = "HAE_RESET",
};
static const char *sas_porte_str[] = {
[0] = "PORTE_BYTES_DMAED",
[1] = "PORTE_BROADCAST_RCVD",
[2] = "PORTE_LINK_RESET_ERR",
[3] = "PORTE_TIMER_EVENT",
[4] = "PORTE_HARD_RESET",
};
static const char *sas_phye_str[] = {
[0] = "PHYE_LOSS_OF_SIGNAL",
[1] = "PHYE_OOB_DONE",
[2] = "PHYE_OOB_ERROR",
[3] = "PHYE_SPINUP_HOLD",
};
void sas_dprint_porte(int phyid, enum port_event pe)
{
SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
}
void sas_dprint_phye(int phyid, enum phy_event pe)
{
SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
}
void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
{
SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
sas_hae_str[he]);
}
void sas_dump_port(struct asd_sas_port *port)
{
SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
SAS_ADDR(port->sas_addr));
SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
SAS_ADDR(port->attached_sas_addr));
SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
}
#endif /* SAS_DEBUG */