mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 09:31:50 +00:00
51fc97b935
After a lot of discussions with AMD it turns out that TSC on Fam10h CPUs is synchronized when the CONSTANT_TSC cpuid bit is set. Or rather that if there are ever systems where that is not true it would be their BIOS' task to disable the bit. So finally use TSC gettimeofday on Fam10h by default. Or rather it is always used now on CPUs where the AMD specific CONSTANT_TSC bit is set. This gives a nice speed bost for gettimeofday() on these systems which tends to be by far the most common v/syscall. On a Fam10h system here TSC gtod uses about 20% of the CPU time of acpi_pm based gtod(). This was measured on 32bit, on 64bit it is even better because TSC gtod() can use a vsyscall and stay in ring 3, which acpi_pm doesn't. The Intel check simply checks for CONSTANT_TSC too without hardcoding Intel vendor. This is equivalent on 64bit because all 64bit capable Intel CPUs will have CONSTANT_TSC set. On Intel there is no CPU supplied CONSTANT_TSC bit currently, but we synthesize one based on hardcoded knowledge which steppings have p-state invariant TSC. So the new logic is now: On CPUs which have the AMD specific CONSTANT_TSC bit set or on Intel CPUs which are new enough to be known to have p-state invariant TSC always use TSC based gettimeofday() Cc: lenb@kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
449 lines
10 KiB
C
449 lines
10 KiB
C
#include <linux/sched.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/percpu.h>
|
|
|
|
#include <asm/delay.h>
|
|
#include <asm/tsc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/timer.h>
|
|
|
|
#include "mach_timer.h"
|
|
|
|
static int tsc_enabled;
|
|
|
|
/*
|
|
* On some systems the TSC frequency does not
|
|
* change with the cpu frequency. So we need
|
|
* an extra value to store the TSC freq
|
|
*/
|
|
unsigned int tsc_khz;
|
|
EXPORT_SYMBOL_GPL(tsc_khz);
|
|
|
|
int tsc_disable;
|
|
|
|
#ifdef CONFIG_X86_TSC
|
|
static int __init tsc_setup(char *str)
|
|
{
|
|
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
|
|
"cannot disable TSC.\n");
|
|
return 1;
|
|
}
|
|
#else
|
|
/*
|
|
* disable flag for tsc. Takes effect by clearing the TSC cpu flag
|
|
* in cpu/common.c
|
|
*/
|
|
static int __init tsc_setup(char *str)
|
|
{
|
|
tsc_disable = 1;
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
__setup("notsc", tsc_setup);
|
|
|
|
/*
|
|
* code to mark and check if the TSC is unstable
|
|
* due to cpufreq or due to unsynced TSCs
|
|
*/
|
|
static int tsc_unstable;
|
|
|
|
int check_tsc_unstable(void)
|
|
{
|
|
return tsc_unstable;
|
|
}
|
|
EXPORT_SYMBOL_GPL(check_tsc_unstable);
|
|
|
|
/* Accelerators for sched_clock()
|
|
* convert from cycles(64bits) => nanoseconds (64bits)
|
|
* basic equation:
|
|
* ns = cycles / (freq / ns_per_sec)
|
|
* ns = cycles * (ns_per_sec / freq)
|
|
* ns = cycles * (10^9 / (cpu_khz * 10^3))
|
|
* ns = cycles * (10^6 / cpu_khz)
|
|
*
|
|
* Then we use scaling math (suggested by george@mvista.com) to get:
|
|
* ns = cycles * (10^6 * SC / cpu_khz) / SC
|
|
* ns = cycles * cyc2ns_scale / SC
|
|
*
|
|
* And since SC is a constant power of two, we can convert the div
|
|
* into a shift.
|
|
*
|
|
* We can use khz divisor instead of mhz to keep a better precision, since
|
|
* cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
|
|
* (mathieu.desnoyers@polymtl.ca)
|
|
*
|
|
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
|
|
*/
|
|
|
|
DEFINE_PER_CPU(unsigned long, cyc2ns);
|
|
|
|
static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
|
|
{
|
|
unsigned long flags, prev_scale, *scale;
|
|
unsigned long long tsc_now, ns_now;
|
|
|
|
local_irq_save(flags);
|
|
sched_clock_idle_sleep_event();
|
|
|
|
scale = &per_cpu(cyc2ns, cpu);
|
|
|
|
rdtscll(tsc_now);
|
|
ns_now = __cycles_2_ns(tsc_now);
|
|
|
|
prev_scale = *scale;
|
|
if (cpu_khz)
|
|
*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
|
|
|
|
/*
|
|
* Start smoothly with the new frequency:
|
|
*/
|
|
sched_clock_idle_wakeup_event(0);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Scheduler clock - returns current time in nanosec units.
|
|
*/
|
|
unsigned long long native_sched_clock(void)
|
|
{
|
|
unsigned long long this_offset;
|
|
|
|
/*
|
|
* Fall back to jiffies if there's no TSC available:
|
|
* ( But note that we still use it if the TSC is marked
|
|
* unstable. We do this because unlike Time Of Day,
|
|
* the scheduler clock tolerates small errors and it's
|
|
* very important for it to be as fast as the platform
|
|
* can achive it. )
|
|
*/
|
|
if (unlikely(!tsc_enabled && !tsc_unstable))
|
|
/* No locking but a rare wrong value is not a big deal: */
|
|
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
|
|
|
|
/* read the Time Stamp Counter: */
|
|
rdtscll(this_offset);
|
|
|
|
/* return the value in ns */
|
|
return cycles_2_ns(this_offset);
|
|
}
|
|
|
|
/* We need to define a real function for sched_clock, to override the
|
|
weak default version */
|
|
#ifdef CONFIG_PARAVIRT
|
|
unsigned long long sched_clock(void)
|
|
{
|
|
return paravirt_sched_clock();
|
|
}
|
|
#else
|
|
unsigned long long sched_clock(void)
|
|
__attribute__((alias("native_sched_clock")));
|
|
#endif
|
|
|
|
unsigned long native_calculate_cpu_khz(void)
|
|
{
|
|
unsigned long long start, end;
|
|
unsigned long count;
|
|
u64 delta64 = (u64)ULLONG_MAX;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* run 3 times to ensure the cache is warm and to get an accurate reading */
|
|
for (i = 0; i < 3; i++) {
|
|
mach_prepare_counter();
|
|
rdtscll(start);
|
|
mach_countup(&count);
|
|
rdtscll(end);
|
|
|
|
/*
|
|
* Error: ECTCNEVERSET
|
|
* The CTC wasn't reliable: we got a hit on the very first read,
|
|
* or the CPU was so fast/slow that the quotient wouldn't fit in
|
|
* 32 bits..
|
|
*/
|
|
if (count <= 1)
|
|
continue;
|
|
|
|
/* cpu freq too slow: */
|
|
if ((end - start) <= CALIBRATE_TIME_MSEC)
|
|
continue;
|
|
|
|
/*
|
|
* We want the minimum time of all runs in case one of them
|
|
* is inaccurate due to SMI or other delay
|
|
*/
|
|
delta64 = min(delta64, (end - start));
|
|
}
|
|
|
|
/* cpu freq too fast (or every run was bad): */
|
|
if (delta64 > (1ULL<<32))
|
|
goto err;
|
|
|
|
delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
|
|
do_div(delta64,CALIBRATE_TIME_MSEC);
|
|
|
|
local_irq_restore(flags);
|
|
return (unsigned long)delta64;
|
|
err:
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
int recalibrate_cpu_khz(void)
|
|
{
|
|
#ifndef CONFIG_SMP
|
|
unsigned long cpu_khz_old = cpu_khz;
|
|
|
|
if (cpu_has_tsc) {
|
|
cpu_khz = calculate_cpu_khz();
|
|
tsc_khz = cpu_khz;
|
|
cpu_data(0).loops_per_jiffy =
|
|
cpufreq_scale(cpu_data(0).loops_per_jiffy,
|
|
cpu_khz_old, cpu_khz);
|
|
return 0;
|
|
} else
|
|
return -ENODEV;
|
|
#else
|
|
return -ENODEV;
|
|
#endif
|
|
}
|
|
|
|
EXPORT_SYMBOL(recalibrate_cpu_khz);
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
|
|
/*
|
|
* if the CPU frequency is scaled, TSC-based delays will need a different
|
|
* loops_per_jiffy value to function properly.
|
|
*/
|
|
static unsigned int ref_freq = 0;
|
|
static unsigned long loops_per_jiffy_ref = 0;
|
|
static unsigned long cpu_khz_ref = 0;
|
|
|
|
static int
|
|
time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
|
|
{
|
|
struct cpufreq_freqs *freq = data;
|
|
|
|
if (!ref_freq) {
|
|
if (!freq->old){
|
|
ref_freq = freq->new;
|
|
return 0;
|
|
}
|
|
ref_freq = freq->old;
|
|
loops_per_jiffy_ref = cpu_data(freq->cpu).loops_per_jiffy;
|
|
cpu_khz_ref = cpu_khz;
|
|
}
|
|
|
|
if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
|
|
(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
|
|
(val == CPUFREQ_RESUMECHANGE)) {
|
|
if (!(freq->flags & CPUFREQ_CONST_LOOPS))
|
|
cpu_data(freq->cpu).loops_per_jiffy =
|
|
cpufreq_scale(loops_per_jiffy_ref,
|
|
ref_freq, freq->new);
|
|
|
|
if (cpu_khz) {
|
|
|
|
if (num_online_cpus() == 1)
|
|
cpu_khz = cpufreq_scale(cpu_khz_ref,
|
|
ref_freq, freq->new);
|
|
if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
|
|
tsc_khz = cpu_khz;
|
|
preempt_disable();
|
|
set_cyc2ns_scale(cpu_khz, smp_processor_id());
|
|
preempt_enable();
|
|
/*
|
|
* TSC based sched_clock turns
|
|
* to junk w/ cpufreq
|
|
*/
|
|
mark_tsc_unstable("cpufreq changes");
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block time_cpufreq_notifier_block = {
|
|
.notifier_call = time_cpufreq_notifier
|
|
};
|
|
|
|
static int __init cpufreq_tsc(void)
|
|
{
|
|
return cpufreq_register_notifier(&time_cpufreq_notifier_block,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
core_initcall(cpufreq_tsc);
|
|
|
|
#endif
|
|
|
|
/* clock source code */
|
|
|
|
static unsigned long current_tsc_khz = 0;
|
|
|
|
static cycle_t read_tsc(void)
|
|
{
|
|
cycle_t ret;
|
|
|
|
rdtscll(ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct clocksource clocksource_tsc = {
|
|
.name = "tsc",
|
|
.rating = 300,
|
|
.read = read_tsc,
|
|
.mask = CLOCKSOURCE_MASK(64),
|
|
.mult = 0, /* to be set */
|
|
.shift = 22,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
|
|
CLOCK_SOURCE_MUST_VERIFY,
|
|
};
|
|
|
|
void mark_tsc_unstable(char *reason)
|
|
{
|
|
if (!tsc_unstable) {
|
|
tsc_unstable = 1;
|
|
tsc_enabled = 0;
|
|
printk("Marking TSC unstable due to: %s.\n", reason);
|
|
/* Can be called before registration */
|
|
if (clocksource_tsc.mult)
|
|
clocksource_change_rating(&clocksource_tsc, 0);
|
|
else
|
|
clocksource_tsc.rating = 0;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
|
|
|
|
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
|
|
{
|
|
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
|
|
d->ident);
|
|
tsc_unstable = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* List of systems that have known TSC problems */
|
|
static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
|
|
{
|
|
.callback = dmi_mark_tsc_unstable,
|
|
.ident = "IBM Thinkpad 380XD",
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
|
|
DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* Make an educated guess if the TSC is trustworthy and synchronized
|
|
* over all CPUs.
|
|
*/
|
|
__cpuinit int unsynchronized_tsc(void)
|
|
{
|
|
if (!cpu_has_tsc || tsc_unstable)
|
|
return 1;
|
|
|
|
/* Anything with constant TSC should be synchronized */
|
|
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
|
|
return 0;
|
|
|
|
/*
|
|
* Intel systems are normally all synchronized.
|
|
* Exceptions must mark TSC as unstable:
|
|
*/
|
|
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
|
|
/* assume multi socket systems are not synchronized: */
|
|
if (num_possible_cpus() > 1)
|
|
tsc_unstable = 1;
|
|
}
|
|
return tsc_unstable;
|
|
}
|
|
|
|
/*
|
|
* Geode_LX - the OLPC CPU has a possibly a very reliable TSC
|
|
*/
|
|
#ifdef CONFIG_MGEODE_LX
|
|
/* RTSC counts during suspend */
|
|
#define RTSC_SUSP 0x100
|
|
|
|
static void __init check_geode_tsc_reliable(void)
|
|
{
|
|
unsigned long res_low, res_high;
|
|
|
|
rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
|
|
if (res_low & RTSC_SUSP)
|
|
clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
|
|
}
|
|
#else
|
|
static inline void check_geode_tsc_reliable(void) { }
|
|
#endif
|
|
|
|
|
|
void __init tsc_init(void)
|
|
{
|
|
int cpu;
|
|
|
|
if (!cpu_has_tsc || tsc_disable)
|
|
goto out_no_tsc;
|
|
|
|
cpu_khz = calculate_cpu_khz();
|
|
tsc_khz = cpu_khz;
|
|
|
|
if (!cpu_khz)
|
|
goto out_no_tsc;
|
|
|
|
printk("Detected %lu.%03lu MHz processor.\n",
|
|
(unsigned long)cpu_khz / 1000,
|
|
(unsigned long)cpu_khz % 1000);
|
|
|
|
/*
|
|
* Secondary CPUs do not run through tsc_init(), so set up
|
|
* all the scale factors for all CPUs, assuming the same
|
|
* speed as the bootup CPU. (cpufreq notifiers will fix this
|
|
* up if their speed diverges)
|
|
*/
|
|
for_each_possible_cpu(cpu)
|
|
set_cyc2ns_scale(cpu_khz, cpu);
|
|
|
|
use_tsc_delay();
|
|
|
|
/* Check and install the TSC clocksource */
|
|
dmi_check_system(bad_tsc_dmi_table);
|
|
|
|
unsynchronized_tsc();
|
|
check_geode_tsc_reliable();
|
|
current_tsc_khz = tsc_khz;
|
|
clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
|
|
clocksource_tsc.shift);
|
|
/* lower the rating if we already know its unstable: */
|
|
if (check_tsc_unstable()) {
|
|
clocksource_tsc.rating = 0;
|
|
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
|
|
} else
|
|
tsc_enabled = 1;
|
|
|
|
clocksource_register(&clocksource_tsc);
|
|
|
|
return;
|
|
|
|
out_no_tsc:
|
|
/*
|
|
* Set the tsc_disable flag if there's no TSC support, this
|
|
* makes it a fast flag for the kernel to see whether it
|
|
* should be using the TSC.
|
|
*/
|
|
tsc_disable = 1;
|
|
}
|