linux/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

/*******************************************************************************
 *
 *  Intel 10 Gigabit PCI Express Linux driver
 *  Copyright(c) 1999 - 2014 Intel Corporation.
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms and conditions of the GNU General Public License,
 *  version 2, as published by the Free Software Foundation.
 *
 *  This program is distributed in the hope it will be useful, but WITHOUT
 *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 *  more details.
 *
 *  The full GNU General Public License is included in this distribution in
 *  the file called "COPYING".
 *
 *  Contact Information:
 *  Linux NICS <linux.nics@intel.com>
 *  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 *  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 ******************************************************************************/
#include "ixgbe_x540.h"
#include "ixgbe_type.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"

/** ixgbe_identify_phy_x550em - Get PHY type based on device id
 *  @hw: pointer to hardware structure
 *
 *  Returns error code
 */
static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
{
	u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);

	switch (hw->device_id) {
	case IXGBE_DEV_ID_X550EM_X_SFP:
		/* set up for CS4227 usage */
		hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
		if (hw->bus.lan_id) {
			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
			esdp |= IXGBE_ESDP_SDP1_DIR;
		}
		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);

		return ixgbe_identify_module_generic(hw);
	case IXGBE_DEV_ID_X550EM_X_KX4:
		hw->phy.type = ixgbe_phy_x550em_kx4;
		break;
	case IXGBE_DEV_ID_X550EM_X_KR:
		hw->phy.type = ixgbe_phy_x550em_kr;
		break;
	case IXGBE_DEV_ID_X550EM_X_1G_T:
	case IXGBE_DEV_ID_X550EM_X_10G_T:
		return ixgbe_identify_phy_generic(hw);
	default:
		break;
	}
	return 0;
}

static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
				     u32 device_type, u16 *phy_data)
{
	return IXGBE_NOT_IMPLEMENTED;
}

static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
				      u32 device_type, u16 phy_data)
{
	return IXGBE_NOT_IMPLEMENTED;
}

/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
 *  @hw: pointer to hardware structure
 *
 *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
 *  ixgbe_hw struct in order to set up EEPROM access.
 **/
s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
{
	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
	u32 eec;
	u16 eeprom_size;

	if (eeprom->type == ixgbe_eeprom_uninitialized) {
		eeprom->semaphore_delay = 10;
		eeprom->type = ixgbe_flash;

		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
				    IXGBE_EEC_SIZE_SHIFT);
		eeprom->word_size = 1 << (eeprom_size +
					  IXGBE_EEPROM_WORD_SIZE_SHIFT);

		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
		       eeprom->type, eeprom->word_size);
	}

	return 0;
}

/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
 *  IOSF device
 *  @hw: pointer to hardware structure
 *  @reg_addr: 32 bit PHY register to write
 *  @device_type: 3 bit device type
 *  @phy_data: Pointer to read data from the register
 **/
s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
				u32 device_type, u32 *data)
{
	u32 i, command, error;

	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));

	/* Write IOSF control register */
	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);

	/* Check every 10 usec to see if the address cycle completed.
	 * The SB IOSF BUSY bit will clear when the operation is
	 * complete
	 */
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
		usleep_range(10, 20);

		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
			break;
	}

	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
		hw_dbg(hw, "Failed to read, error %x\n", error);
		return IXGBE_ERR_PHY;
	}

	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
		hw_dbg(hw, "Read timed out\n");
		return IXGBE_ERR_PHY;
	}

	*data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);

	return 0;
}

/** ixgbe_read_ee_hostif_data_X550 - Read EEPROM word using a host interface
 *  command assuming that the semaphore is already obtained.
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to read
 *  @data: word read from the EEPROM
 *
 *  Reads a 16 bit word from the EEPROM using the hostif.
 **/
s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
	s32 status;
	struct ixgbe_hic_read_shadow_ram buffer;

	buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
	buffer.hdr.req.buf_lenh = 0;
	buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;

	/* convert offset from words to bytes */
	buffer.address = cpu_to_be32(offset * 2);
	/* one word */
	buffer.length = cpu_to_be16(sizeof(u16));

	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
					      sizeof(buffer),
					      IXGBE_HI_COMMAND_TIMEOUT, false);
	if (status)
		return status;

	*data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
					  FW_NVM_DATA_OFFSET);

	return 0;
}

/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to read
 *  @words: number of words
 *  @data: word(s) read from the EEPROM
 *
 *  Reads a 16 bit word(s) from the EEPROM using the hostif.
 **/
s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
				     u16 offset, u16 words, u16 *data)
{
	struct ixgbe_hic_read_shadow_ram buffer;
	u32 current_word = 0;
	u16 words_to_read;
	s32 status;
	u32 i;

	/* Take semaphore for the entire operation. */
	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
	if (status) {
		hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
		return status;
	}

	while (words) {
		if (words > FW_MAX_READ_BUFFER_SIZE / 2)
			words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
		else
			words_to_read = words;

		buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
		buffer.hdr.req.buf_lenh = 0;
		buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
		buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;

		/* convert offset from words to bytes */
		buffer.address = cpu_to_be32((offset + current_word) * 2);
		buffer.length = cpu_to_be16(words_to_read * 2);

		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
						      sizeof(buffer),
						      IXGBE_HI_COMMAND_TIMEOUT,
						      false);
		if (status) {
			hw_dbg(hw, "Host interface command failed\n");
			goto out;
		}

		for (i = 0; i < words_to_read; i++) {
			u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
				  2 * i;
			u32 value = IXGBE_READ_REG(hw, reg);

			data[current_word] = (u16)(value & 0xffff);
			current_word++;
			i++;
			if (i < words_to_read) {
				value >>= 16;
				data[current_word] = (u16)(value & 0xffff);
				current_word++;
			}
		}
		words -= words_to_read;
	}

out:
	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
	return status;
}

/** ixgbe_checksum_ptr_x550 - Checksum one pointer region
 *  @hw: pointer to hardware structure
 *  @ptr: pointer offset in eeprom
 *  @size: size of section pointed by ptr, if 0 first word will be used as size
 *  @csum: address of checksum to update
 *
 *  Returns error status for any failure
 **/
static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
				   u16 size, u16 *csum, u16 *buffer,
				   u32 buffer_size)
{
	u16 buf[256];
	s32 status;
	u16 length, bufsz, i, start;
	u16 *local_buffer;

	bufsz = sizeof(buf) / sizeof(buf[0]);

	/* Read a chunk at the pointer location */
	if (!buffer) {
		status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
		if (status) {
			hw_dbg(hw, "Failed to read EEPROM image\n");
			return status;
		}
		local_buffer = buf;
	} else {
		if (buffer_size < ptr)
			return  IXGBE_ERR_PARAM;
		local_buffer = &buffer[ptr];
	}

	if (size) {
		start = 0;
		length = size;
	} else {
		start = 1;
		length = local_buffer[0];

		/* Skip pointer section if length is invalid. */
		if (length == 0xFFFF || length == 0 ||
		    (ptr + length) >= hw->eeprom.word_size)
			return 0;
	}

	if (buffer && ((u32)start + (u32)length > buffer_size))
		return IXGBE_ERR_PARAM;

	for (i = start; length; i++, length--) {
		if (i == bufsz && !buffer) {
			ptr += bufsz;
			i = 0;
			if (length < bufsz)
				bufsz = length;

			/* Read a chunk at the pointer location */
			status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
								  bufsz, buf);
			if (status) {
				hw_dbg(hw, "Failed to read EEPROM image\n");
				return status;
			}
		}
		*csum += local_buffer[i];
	}
	return 0;
}

/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
 *  @hw: pointer to hardware structure
 *  @buffer: pointer to buffer containing calculated checksum
 *  @buffer_size: size of buffer
 *
 *  Returns a negative error code on error, or the 16-bit checksum
 **/
s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
{
	u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
	u16 *local_buffer;
	s32 status;
	u16 checksum = 0;
	u16 pointer, i, size;

	hw->eeprom.ops.init_params(hw);

	if (!buffer) {
		/* Read pointer area */
		status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
						IXGBE_EEPROM_LAST_WORD + 1,
						eeprom_ptrs);
		if (status) {
			hw_dbg(hw, "Failed to read EEPROM image\n");
			return status;
		}
		local_buffer = eeprom_ptrs;
	} else {
		if (buffer_size < IXGBE_EEPROM_LAST_WORD)
			return IXGBE_ERR_PARAM;
		local_buffer = buffer;
	}

	/* For X550 hardware include 0x0-0x41 in the checksum, skip the
	 * checksum word itself
	 */
	for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
		if (i != IXGBE_EEPROM_CHECKSUM)
			checksum += local_buffer[i];

	/* Include all data from pointers 0x3, 0x6-0xE.  This excludes the
	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
	 */
	for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
			continue;

		pointer = local_buffer[i];

		/* Skip pointer section if the pointer is invalid. */
		if (pointer == 0xFFFF || pointer == 0 ||
		    pointer >= hw->eeprom.word_size)
			continue;

		switch (i) {
		case IXGBE_PCIE_GENERAL_PTR:
			size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
			break;
		case IXGBE_PCIE_CONFIG0_PTR:
		case IXGBE_PCIE_CONFIG1_PTR:
			size = IXGBE_PCIE_CONFIG_SIZE;
			break;
		default:
			size = 0;
			break;
		}

		status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
						 buffer, buffer_size);
		if (status)
			return status;
	}

	checksum = (u16)IXGBE_EEPROM_SUM - checksum;

	return (s32)checksum;
}

/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
 *  @hw: pointer to hardware structure
 *
 *  Returns a negative error code on error, or the 16-bit checksum
 **/
s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
{
	return ixgbe_calc_checksum_X550(hw, NULL, 0);
}

/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to read
 *  @data: word read from the EEPROM
 *
 *   Reads a 16 bit word from the EEPROM using the hostif.
 **/
s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
	s32 status = 0;

	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
		status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
	} else {
		status = IXGBE_ERR_SWFW_SYNC;
	}

	return status;
}

/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
 *  @hw: pointer to hardware structure
 *  @checksum_val: calculated checksum
 *
 *  Performs checksum calculation and validates the EEPROM checksum.  If the
 *  caller does not need checksum_val, the value can be NULL.
 **/
s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
{
	s32 status;
	u16 checksum;
	u16 read_checksum = 0;

	/* Read the first word from the EEPROM. If this times out or fails, do
	 * not continue or we could be in for a very long wait while every
	 * EEPROM read fails
	 */
	status = hw->eeprom.ops.read(hw, 0, &checksum);
	if (status) {
		hw_dbg(hw, "EEPROM read failed\n");
		return status;
	}

	status = hw->eeprom.ops.calc_checksum(hw);
	if (status < 0)
		return status;

	checksum = (u16)(status & 0xffff);

	status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
					   &read_checksum);
	if (status)
		return status;

	/* Verify read checksum from EEPROM is the same as
	 * calculated checksum
	 */
	if (read_checksum != checksum) {
		status = IXGBE_ERR_EEPROM_CHECKSUM;
		hw_dbg(hw, "Invalid EEPROM checksum");
	}

	/* If the user cares, return the calculated checksum */
	if (checksum_val)
		*checksum_val = checksum;

	return status;
}

/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to write
 *  @data: word write to the EEPROM
 *
 *  Write a 16 bit word to the EEPROM using the hostif.
 **/
s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
{
	s32 status;
	struct ixgbe_hic_write_shadow_ram buffer;

	buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
	buffer.hdr.req.buf_lenh = 0;
	buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
	buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;

	/* one word */
	buffer.length = cpu_to_be16(sizeof(u16));
	buffer.data = data;
	buffer.address = cpu_to_be32(offset * 2);

	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
					      sizeof(buffer),
					      IXGBE_HI_COMMAND_TIMEOUT, false);
	return status;
}

/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to write
 *  @data: word write to the EEPROM
 *
 *  Write a 16 bit word to the EEPROM using the hostif.
 **/
s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
{
	s32 status = 0;

	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
		status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
	} else {
		hw_dbg(hw, "write ee hostif failed to get semaphore");
		status = IXGBE_ERR_SWFW_SYNC;
	}

	return status;
}

/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
 *  @hw: pointer to hardware structure
 *
 *  Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
 **/
s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
{
	s32 status = 0;
	union ixgbe_hic_hdr2 buffer;

	buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
	buffer.req.buf_lenh = 0;
	buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
	buffer.req.checksum = FW_DEFAULT_CHECKSUM;

	status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
					      sizeof(buffer),
					      IXGBE_HI_COMMAND_TIMEOUT, false);
	return status;
}

/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
 *  @hw: pointer to hardware structure
 *
 *  After writing EEPROM to shadow RAM using EEWR register, software calculates
 *  checksum and updates the EEPROM and instructs the hardware to update
 *  the flash.
 **/
s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
{
	s32 status;
	u16 checksum = 0;

	/* Read the first word from the EEPROM. If this times out or fails, do
	 * not continue or we could be in for a very long wait while every
	 * EEPROM read fails
	 */
	status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
	if (status) {
		hw_dbg(hw, "EEPROM read failed\n");
		return status;
	}

	status = ixgbe_calc_eeprom_checksum_X550(hw);
	if (status < 0)
		return status;

	checksum = (u16)(status & 0xffff);

	status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
					    checksum);
	if (status)
		return status;

	status = ixgbe_update_flash_X550(hw);

	return status;
}

/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to write
 *  @words: number of words
 *  @data: word(s) write to the EEPROM
 *
 *
 *  Write a 16 bit word(s) to the EEPROM using the hostif.
 **/
s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
				      u16 offset, u16 words, u16 *data)
{
	s32 status = 0;
	u32 i = 0;

	/* Take semaphore for the entire operation. */
	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
	if (status) {
		hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
		return status;
	}

	for (i = 0; i < words; i++) {
		status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
							 data[i]);
		if (status) {
			hw_dbg(hw, "Eeprom buffered write failed\n");
			break;
		}
	}

	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);

	return status;
}

/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
 *  @hw: pointer to hardware structure
 **/
void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
{
	struct ixgbe_mac_info *mac = &hw->mac;

	/* CS4227 does not support autoneg, so disable the laser control
	 * functions for SFP+ fiber
	 */
	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
		mac->ops.disable_tx_laser = NULL;
		mac->ops.enable_tx_laser = NULL;
		mac->ops.flap_tx_laser = NULL;
	}
}

/** ixgbe_setup_sfp_modules_X550em - Setup SFP module
 * @hw: pointer to hardware structure
 */
s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
{
	bool setup_linear;
	u16 reg_slice, edc_mode;
	s32 ret_val;

	switch (hw->phy.sfp_type) {
	case ixgbe_sfp_type_unknown:
		return 0;
	case ixgbe_sfp_type_not_present:
		return IXGBE_ERR_SFP_NOT_PRESENT;
	case ixgbe_sfp_type_da_cu_core0:
	case ixgbe_sfp_type_da_cu_core1:
		setup_linear = true;
		break;
	case ixgbe_sfp_type_srlr_core0:
	case ixgbe_sfp_type_srlr_core1:
	case ixgbe_sfp_type_da_act_lmt_core0:
	case ixgbe_sfp_type_da_act_lmt_core1:
	case ixgbe_sfp_type_1g_sx_core0:
	case ixgbe_sfp_type_1g_sx_core1:
		setup_linear = false;
		break;
	default:
		return IXGBE_ERR_SFP_NOT_SUPPORTED;
	}

	ixgbe_init_mac_link_ops_X550em(hw);
	hw->phy.ops.reset = NULL;

	/* The CS4227 slice address is the base address + the port-pair reg
	 * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0.
	 */
	reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12);

	if (setup_linear)
		edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
	else
		edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;

	/* Configure CS4227 for connection type. */
	ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
						 edc_mode);

	if (ret_val)
		ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice,
							 edc_mode);

	return ret_val;
}

/** ixgbe_get_link_capabilities_x550em - Determines link capabilities
 * @hw: pointer to hardware structure
 * @speed: pointer to link speed
 * @autoneg: true when autoneg or autotry is enabled
 **/
s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
				       ixgbe_link_speed *speed,
				       bool *autoneg)
{
	/* SFP */
	if (hw->phy.media_type == ixgbe_media_type_fiber) {
		/* CS4227 SFP must not enable auto-negotiation */
		*autoneg = false;

		if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
		    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
			*speed = IXGBE_LINK_SPEED_1GB_FULL;
			return 0;
		}

		/* Link capabilities are based on SFP */
		if (hw->phy.multispeed_fiber)
			*speed = IXGBE_LINK_SPEED_10GB_FULL |
				 IXGBE_LINK_SPEED_1GB_FULL;
		else
			*speed = IXGBE_LINK_SPEED_10GB_FULL;
	} else {
		*speed = IXGBE_LINK_SPEED_10GB_FULL |
			 IXGBE_LINK_SPEED_1GB_FULL;
		*autoneg = true;
	}
	return 0;
}

/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
 *  IOSF device
 *
 *  @hw: pointer to hardware structure
 *  @reg_addr: 32 bit PHY register to write
 *  @device_type: 3 bit device type
 *  @data: Data to write to the register
 **/
s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
				 u32 device_type, u32 data)
{
	u32 i, command, error;

	command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
		   (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));

	/* Write IOSF control register */
	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);

	/* Write IOSF data register */
	IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);

	/* Check every 10 usec to see if the address cycle completed.
	 * The SB IOSF BUSY bit will clear when the operation is
	 * complete
	 */
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
		usleep_range(10, 20);

		command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
		if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
			break;
	}

	if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
		error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
			 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
		hw_dbg(hw, "Failed to write, error %x\n", error);
		return IXGBE_ERR_PHY;
	}

	if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
		hw_dbg(hw, "Write timed out\n");
		return IXGBE_ERR_PHY;
	}

	return 0;
}

/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
 *  @hw: pointer to hardware structure
 *  @speed: the link speed to force
 *
 *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
 *  internal and external PHY at a specific speed, without autonegotiation.
 **/
static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
{
	s32 status;
	u32 reg_val;

	/* Disable AN and force speed to 10G Serial. */
	status = ixgbe_read_iosf_sb_reg_x550(hw,
					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;

	/* Select forced link speed for internal PHY. */
	switch (*speed) {
	case IXGBE_LINK_SPEED_10GB_FULL:
		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
		break;
	case IXGBE_LINK_SPEED_1GB_FULL:
		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
		break;
	default:
		/* Other link speeds are not supported by internal KR PHY. */
		return IXGBE_ERR_LINK_SETUP;
	}

	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
	if (status)
		return status;

	/* Disable training protocol FSM. */
	status = ixgbe_read_iosf_sb_reg_x550(hw,
				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
	if (status)
		return status;

	/* Disable Flex from training TXFFE. */
	status = ixgbe_read_iosf_sb_reg_x550(hw,
				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
	if (status)
		return status;

	status = ixgbe_read_iosf_sb_reg_x550(hw,
				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
	reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
	if (status)
		return status;

	/* Enable override for coefficients. */
	status = ixgbe_read_iosf_sb_reg_x550(hw,
				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
	reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
	if (status)
		return status;

	/* Toggle port SW reset by AN reset. */
	status = ixgbe_read_iosf_sb_reg_x550(hw,
				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);

	return status;
}

/** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
 *  @hw: pointer to hardware structure
 *
 *   Configures the integrated KX4 PHY.
 **/
s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
{
	s32 status;
	u32 reg_val;

	status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
					     IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
					     hw->bus.lan_id, &reg_val);
	if (status)
		return status;

	reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
		     IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);

	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;

	/* Advertise 10G support. */
	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;

	/* Advertise 1G support. */
	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
		reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;

	/* Restart auto-negotiation. */
	reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
	status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
					      IXGBE_SB_IOSF_TARGET_KX4_PCS0 +
					      hw->bus.lan_id, reg_val);

	return status;
}

/**  ixgbe_setup_kr_x550em - Configure the KR PHY.
 *   @hw: pointer to hardware structure
 *
 *   Configures the integrated KR PHY.
 **/
s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
{
	s32 status;
	u32 reg_val;

	status = ixgbe_read_iosf_sb_reg_x550(hw,
					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
	if (status)
		return status;

	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ;
	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
	reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
		     IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);

	/* Advertise 10G support. */
	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;

	/* Advertise 1G support. */
	if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;

	/* Restart auto-negotiation. */
	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
	status = ixgbe_write_iosf_sb_reg_x550(hw,
					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);

	return status;
}

/** ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
 *  @hw: point to hardware structure
 *
 *  Configures the integrated KR PHY to talk to the external PHY. The base
 *  driver will call this function when it gets notification via interrupt from
 *  the external PHY. This function forces the internal PHY into iXFI mode at
 *  the correct speed.
 *
 *  A return of a non-zero value indicates an error, and the base driver should
 *  not report link up.
 **/
s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
{
	u32 status;
	u16 lasi, autoneg_status, speed;
	ixgbe_link_speed force_speed;

	/* Verify that the external link status has changed */
	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
				      IXGBE_MDIO_PMA_PMD_DEV_TYPE, &lasi);
	if (status)
		return status;

	/* If there was no change in link status, we can just exit */
	if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
		return 0;

	/* we read this twice back to back to indicate current status */
	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
				      &autoneg_status);
	if (status)
		return status;

	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
				      &autoneg_status);
	if (status)
		return status;

	/* If link is not up return an error indicating treat link as down */
	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
		return IXGBE_ERR_INVALID_LINK_SETTINGS;

	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
				      &speed);

	/* clear everything but the speed and duplex bits */
	speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;

	switch (speed) {
	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
		force_speed = IXGBE_LINK_SPEED_10GB_FULL;
		break;
	case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
		force_speed = IXGBE_LINK_SPEED_1GB_FULL;
		break;
	default:
		/* Internal PHY does not support anything else */
		return IXGBE_ERR_INVALID_LINK_SETTINGS;
	}

	return ixgbe_setup_ixfi_x550em(hw, &force_speed);
}

/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
 *  @hw: pointer to hardware structure
 *
 *  Initialize any function pointers that were not able to be
 *  set during init_shared_code because the PHY/SFP type was
 *  not known.  Perform the SFP init if necessary.
 **/
s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
{
	struct ixgbe_phy_info *phy = &hw->phy;
	s32 ret_val;
	u32 esdp;

	if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
		phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;

		if (hw->bus.lan_id) {
			esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
			esdp |= IXGBE_ESDP_SDP1_DIR;
		}
		esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
	}

	/* Identify the PHY or SFP module */
	ret_val = phy->ops.identify(hw);

	/* Setup function pointers based on detected SFP module and speeds */
	ixgbe_init_mac_link_ops_X550em(hw);
	if (phy->sfp_type != ixgbe_sfp_type_unknown)
		phy->ops.reset = NULL;

	/* Set functions pointers based on phy type */
	switch (hw->phy.type) {
	case ixgbe_phy_x550em_kx4:
		phy->ops.setup_link = ixgbe_setup_kx4_x550em;
		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
		break;
	case ixgbe_phy_x550em_kr:
		phy->ops.setup_link = ixgbe_setup_kr_x550em;
		phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
		break;
	case ixgbe_phy_x550em_ext_t:
		phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
		break;
	default:
		break;
	}
	return ret_val;
}

/** ixgbe_get_media_type_X550em - Get media type
 *  @hw: pointer to hardware structure
 *
 *  Returns the media type (fiber, copper, backplane)
 *
 */
enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
{
	enum ixgbe_media_type media_type;

	/* Detect if there is a copper PHY attached. */
	switch (hw->device_id) {
	case IXGBE_DEV_ID_X550EM_X_KR:
	case IXGBE_DEV_ID_X550EM_X_KX4:
		media_type = ixgbe_media_type_backplane;
		break;
	case IXGBE_DEV_ID_X550EM_X_SFP:
		media_type = ixgbe_media_type_fiber;
		break;
	case IXGBE_DEV_ID_X550EM_X_1G_T:
	case IXGBE_DEV_ID_X550EM_X_10G_T:
		 media_type = ixgbe_media_type_copper;
		break;
	default:
		media_type = ixgbe_media_type_unknown;
		break;
	}
	return media_type;
}

/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
 ** @hw: pointer to hardware structure
 **/
s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
{
	u32 status;
	u16 reg;
	u32 retries = 2;

	do {
		/* decrement retries counter and exit if we hit 0 */
		if (retries < 1) {
			hw_dbg(hw, "External PHY not yet finished resetting.");
			return IXGBE_ERR_PHY;
		}
		retries--;

		status = hw->phy.ops.read_reg(hw,
					      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
					      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
					      &reg);
		if (status)
			return status;

		/* Verify PHY FW reset has completed */
	} while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1);

	/* Set port to low power mode */
	status = hw->phy.ops.read_reg(hw,
				      IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
				      &reg);
	if (status)
		return status;

	/* Enable the transmitter */
	status = hw->phy.ops.read_reg(hw,
				      IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
				      &reg);
	if (status)
		return status;

	reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE;

	status = hw->phy.ops.write_reg(hw,
				       IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR,
				       IXGBE_MDIO_PMA_PMD_DEV_TYPE,
				       reg);
	if (status)
		return status;

	/* Un-stall the PHY FW */
	status = hw->phy.ops.read_reg(hw,
				      IXGBE_MDIO_GLOBAL_RES_PR_10,
				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
				      &reg);
	if (status)
		return status;

	reg &= ~IXGBE_MDIO_POWER_UP_STALL;

	status = hw->phy.ops.write_reg(hw,
				       IXGBE_MDIO_GLOBAL_RES_PR_10,
				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
				       reg);
	return status;
}

/**  ixgbe_reset_hw_X550em - Perform hardware reset
 **  @hw: pointer to hardware structure
 **
 **  Resets the hardware by resetting the transmit and receive units, masks
 **  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
 **  reset.
 **/
s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
{
	ixgbe_link_speed link_speed;
	s32 status;
	u32 ctrl = 0;
	u32 i;
	bool link_up = false;

	/* Call adapter stop to disable Tx/Rx and clear interrupts */
	status = hw->mac.ops.stop_adapter(hw);
	if (status)
		return status;

	/* flush pending Tx transactions */
	ixgbe_clear_tx_pending(hw);

	/* PHY ops must be identified and initialized prior to reset */

	/* Identify PHY and related function pointers */
	status = hw->phy.ops.init(hw);

	/* start the external PHY */
	if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
		status = ixgbe_init_ext_t_x550em(hw);
		if (status)
			return status;
	}

	/* Setup SFP module if there is one present. */
	if (hw->phy.sfp_setup_needed) {
		status = hw->mac.ops.setup_sfp(hw);
		hw->phy.sfp_setup_needed = false;
	}

	/* Reset PHY */
	if (!hw->phy.reset_disable && hw->phy.ops.reset)
		hw->phy.ops.reset(hw);

mac_reset_top:
	/* Issue global reset to the MAC.  Needs to be SW reset if link is up.
	 * If link reset is used when link is up, it might reset the PHY when
	 * mng is using it.  If link is down or the flag to force full link
	 * reset is set, then perform link reset.
	 */
	ctrl = IXGBE_CTRL_LNK_RST;

	if (!hw->force_full_reset) {
		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
		if (link_up)
			ctrl = IXGBE_CTRL_RST;
	}

	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
	IXGBE_WRITE_FLUSH(hw);

	/* Poll for reset bit to self-clear meaning reset is complete */
	for (i = 0; i < 10; i++) {
		udelay(1);
		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
		if (!(ctrl & IXGBE_CTRL_RST_MASK))
			break;
	}

	if (ctrl & IXGBE_CTRL_RST_MASK) {
		status = IXGBE_ERR_RESET_FAILED;
		hw_dbg(hw, "Reset polling failed to complete.\n");
	}

	msleep(50);

	/* Double resets are required for recovery from certain error
	 * clear the multicast table.  Also reset num_rar_entries to 128,
	 * since we modify this value when programming the SAN MAC address.
	 */
	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
		goto mac_reset_top;
	}

	/* Store the permanent mac address */
	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);

	/* Store MAC address from RAR0, clear receive address registers, and
	 * clear the multicast table.  Also reset num_rar_entries to 128,
	 * since we modify this value when programming the SAN MAC address.
	 */
	hw->mac.num_rar_entries = 128;
	hw->mac.ops.init_rx_addrs(hw);

	return status;
}

#define X550_COMMON_MAC \
	.init_hw			= &ixgbe_init_hw_generic, \
	.start_hw			= &ixgbe_start_hw_X540, \
	.clear_hw_cntrs			= &ixgbe_clear_hw_cntrs_generic, \
	.enable_rx_dma			= &ixgbe_enable_rx_dma_generic, \
	.get_mac_addr			= &ixgbe_get_mac_addr_generic, \
	.get_device_caps		= &ixgbe_get_device_caps_generic, \
	.stop_adapter			= &ixgbe_stop_adapter_generic, \
	.get_bus_info			= &ixgbe_get_bus_info_generic, \
	.set_lan_id			= &ixgbe_set_lan_id_multi_port_pcie, \
	.read_analog_reg8		= NULL, \
	.write_analog_reg8		= NULL, \
	.set_rxpba			= &ixgbe_set_rxpba_generic, \
	.check_link			= &ixgbe_check_mac_link_generic, \
	.led_on				= &ixgbe_led_on_generic, \
	.led_off			= &ixgbe_led_off_generic, \
	.blink_led_start		= &ixgbe_blink_led_start_X540, \
	.blink_led_stop			= &ixgbe_blink_led_stop_X540, \
	.set_rar			= &ixgbe_set_rar_generic, \
	.clear_rar			= &ixgbe_clear_rar_generic, \
	.set_vmdq			= &ixgbe_set_vmdq_generic, \
	.set_vmdq_san_mac		= &ixgbe_set_vmdq_san_mac_generic, \
	.clear_vmdq			= &ixgbe_clear_vmdq_generic, \
	.init_rx_addrs			= &ixgbe_init_rx_addrs_generic, \
	.update_mc_addr_list		= &ixgbe_update_mc_addr_list_generic, \
	.enable_mc			= &ixgbe_enable_mc_generic, \
	.disable_mc			= &ixgbe_disable_mc_generic, \
	.clear_vfta			= &ixgbe_clear_vfta_generic, \
	.set_vfta			= &ixgbe_set_vfta_generic, \
	.fc_enable			= &ixgbe_fc_enable_generic, \
	.set_fw_drv_ver			= &ixgbe_set_fw_drv_ver_generic, \
	.init_uta_tables		= &ixgbe_init_uta_tables_generic, \
	.set_mac_anti_spoofing		= &ixgbe_set_mac_anti_spoofing, \
	.set_vlan_anti_spoofing		= &ixgbe_set_vlan_anti_spoofing, \
	.acquire_swfw_sync		= &ixgbe_acquire_swfw_sync_X540, \
	.release_swfw_sync		= &ixgbe_release_swfw_sync_X540, \
	.disable_rx_buff		= &ixgbe_disable_rx_buff_generic, \
	.enable_rx_buff			= &ixgbe_enable_rx_buff_generic, \
	.get_thermal_sensor_data	= NULL, \
	.init_thermal_sensor_thresh	= NULL, \
	.prot_autoc_read		= &prot_autoc_read_generic, \
	.prot_autoc_write		= &prot_autoc_write_generic, \

static struct ixgbe_mac_operations mac_ops_X550 = {
	X550_COMMON_MAC
	.reset_hw		= &ixgbe_reset_hw_X540,
	.get_media_type		= &ixgbe_get_media_type_X540,
	.get_san_mac_addr	= &ixgbe_get_san_mac_addr_generic,
	.get_wwn_prefix		= &ixgbe_get_wwn_prefix_generic,
	.setup_link		= &ixgbe_setup_mac_link_X540,
	.set_rxpba		= &ixgbe_set_rxpba_generic,
	.get_link_capabilities	= &ixgbe_get_copper_link_capabilities_generic,
	.setup_sfp		= NULL,
};

static struct ixgbe_mac_operations mac_ops_X550EM_x = {
	X550_COMMON_MAC
	.reset_hw		= &ixgbe_reset_hw_X550em,
	.get_media_type		= &ixgbe_get_media_type_X550em,
	.get_san_mac_addr	= NULL,
	.get_wwn_prefix		= NULL,
	.setup_link		= NULL, /* defined later */
	.get_link_capabilities	= &ixgbe_get_link_capabilities_X550em,
	.setup_sfp		= ixgbe_setup_sfp_modules_X550em,

};

#define X550_COMMON_EEP \
	.read			= &ixgbe_read_ee_hostif_X550, \
	.read_buffer		= &ixgbe_read_ee_hostif_buffer_X550, \
	.write			= &ixgbe_write_ee_hostif_X550, \
	.write_buffer		= &ixgbe_write_ee_hostif_buffer_X550, \
	.validate_checksum	= &ixgbe_validate_eeprom_checksum_X550, \
	.update_checksum	= &ixgbe_update_eeprom_checksum_X550, \
	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X550, \

static struct ixgbe_eeprom_operations eeprom_ops_X550 = {
	X550_COMMON_EEP
	.init_params		= &ixgbe_init_eeprom_params_X550,
};

static struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
	X550_COMMON_EEP
	.init_params		= &ixgbe_init_eeprom_params_X540,
};

#define X550_COMMON_PHY	\
	.identify_sfp		= &ixgbe_identify_module_generic, \
	.reset			= NULL, \
	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic, \
	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic, \
	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic, \
	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic, \
	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic, \
	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic, \
	.check_overtemp		= &ixgbe_tn_check_overtemp, \
	.get_firmware_version	= &ixgbe_get_phy_firmware_version_generic,

static struct ixgbe_phy_operations phy_ops_X550 = {
	X550_COMMON_PHY
	.init			= NULL,
	.identify		= &ixgbe_identify_phy_generic,
	.read_reg		= &ixgbe_read_phy_reg_generic,
	.write_reg		= &ixgbe_write_phy_reg_generic,
	.setup_link		= &ixgbe_setup_phy_link_generic,
	.read_i2c_combined	= &ixgbe_read_i2c_combined_generic,
	.write_i2c_combined	= &ixgbe_write_i2c_combined_generic,
};

static struct ixgbe_phy_operations phy_ops_X550EM_x = {
	X550_COMMON_PHY
	.init			= &ixgbe_init_phy_ops_X550em,
	.identify		= &ixgbe_identify_phy_x550em,
	.read_reg		= NULL, /* defined later */
	.write_reg		= NULL, /* defined later */
	.setup_link		= NULL, /* defined later */
};

struct ixgbe_info ixgbe_X550_info = {
	.mac			= ixgbe_mac_X550,
	.get_invariants		= &ixgbe_get_invariants_X540,
	.mac_ops		= &mac_ops_X550,
	.eeprom_ops		= &eeprom_ops_X550,
	.phy_ops		= &phy_ops_X550,
	.mbx_ops		= &mbx_ops_generic,
};

struct ixgbe_info ixgbe_X550EM_x_info = {
	.mac			= ixgbe_mac_X550EM_x,
	.get_invariants		= &ixgbe_get_invariants_X540,
	.mac_ops		= &mac_ops_X550EM_x,
	.eeprom_ops		= &eeprom_ops_X550EM_x,
	.phy_ops		= &phy_ops_X550EM_x,
	.mbx_ops		= &mbx_ops_generic,
};