mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 23:51:39 +00:00
1f86df49dd
This macro simply declares an enum, so drivers might as well declare it themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
479 lines
13 KiB
C
479 lines
13 KiB
C
/*
|
|
* lm95241.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (C) 2008 Davide Rizzo <elpa-rizzo@gmail.com>
|
|
*
|
|
* Based on the max1619 driver. The LM95241 is a sensor chip made by National
|
|
* Semiconductors.
|
|
* It reports up to three temperatures (its own plus up to
|
|
* two external ones). Complete datasheet can be
|
|
* obtained from National's website at:
|
|
* http://www.national.com/ds.cgi/LM/LM95241.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
static const unsigned short normal_i2c[] = {
|
|
0x19, 0x2a, 0x2b, I2C_CLIENT_END};
|
|
|
|
/* LM95241 registers */
|
|
#define LM95241_REG_R_MAN_ID 0xFE
|
|
#define LM95241_REG_R_CHIP_ID 0xFF
|
|
#define LM95241_REG_R_STATUS 0x02
|
|
#define LM95241_REG_RW_CONFIG 0x03
|
|
#define LM95241_REG_RW_REM_FILTER 0x06
|
|
#define LM95241_REG_RW_TRUTHERM 0x07
|
|
#define LM95241_REG_W_ONE_SHOT 0x0F
|
|
#define LM95241_REG_R_LOCAL_TEMPH 0x10
|
|
#define LM95241_REG_R_REMOTE1_TEMPH 0x11
|
|
#define LM95241_REG_R_REMOTE2_TEMPH 0x12
|
|
#define LM95241_REG_R_LOCAL_TEMPL 0x20
|
|
#define LM95241_REG_R_REMOTE1_TEMPL 0x21
|
|
#define LM95241_REG_R_REMOTE2_TEMPL 0x22
|
|
#define LM95241_REG_RW_REMOTE_MODEL 0x30
|
|
|
|
/* LM95241 specific bitfields */
|
|
#define CFG_STOP 0x40
|
|
#define CFG_CR0076 0x00
|
|
#define CFG_CR0182 0x10
|
|
#define CFG_CR1000 0x20
|
|
#define CFG_CR2700 0x30
|
|
#define R1MS_SHIFT 0
|
|
#define R2MS_SHIFT 2
|
|
#define R1MS_MASK (0x01 << (R1MS_SHIFT))
|
|
#define R2MS_MASK (0x01 << (R2MS_SHIFT))
|
|
#define R1DF_SHIFT 1
|
|
#define R2DF_SHIFT 2
|
|
#define R1DF_MASK (0x01 << (R1DF_SHIFT))
|
|
#define R2DF_MASK (0x01 << (R2DF_SHIFT))
|
|
#define R1FE_MASK 0x01
|
|
#define R2FE_MASK 0x05
|
|
#define TT1_SHIFT 0
|
|
#define TT2_SHIFT 4
|
|
#define TT_OFF 0
|
|
#define TT_ON 1
|
|
#define TT_MASK 7
|
|
#define MANUFACTURER_ID 0x01
|
|
#define DEFAULT_REVISION 0xA4
|
|
|
|
/* Conversions and various macros */
|
|
#define TEMP_FROM_REG(val_h, val_l) (((val_h) & 0x80 ? (val_h) - 0x100 : \
|
|
(val_h)) * 1000 + (val_l) * 1000 / 256)
|
|
|
|
/* Functions declaration */
|
|
static void lm95241_init_client(struct i2c_client *client);
|
|
static struct lm95241_data *lm95241_update_device(struct device *dev);
|
|
|
|
/* Client data (each client gets its own) */
|
|
struct lm95241_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
unsigned long last_updated, rate; /* in jiffies */
|
|
char valid; /* zero until following fields are valid */
|
|
/* registers values */
|
|
u8 local_h, local_l; /* local */
|
|
u8 remote1_h, remote1_l; /* remote1 */
|
|
u8 remote2_h, remote2_l; /* remote2 */
|
|
u8 config, model, trutherm;
|
|
};
|
|
|
|
/* Sysfs stuff */
|
|
#define show_temp(value) \
|
|
static ssize_t show_##value(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm95241_data *data = lm95241_update_device(dev); \
|
|
snprintf(buf, PAGE_SIZE - 1, "%d\n", \
|
|
TEMP_FROM_REG(data->value##_h, data->value##_l)); \
|
|
return strlen(buf); \
|
|
}
|
|
show_temp(local);
|
|
show_temp(remote1);
|
|
show_temp(remote2);
|
|
|
|
static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct lm95241_data *data = lm95241_update_device(dev);
|
|
|
|
snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ);
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm95241_data *data = i2c_get_clientdata(client);
|
|
|
|
strict_strtol(buf, 10, &data->rate);
|
|
data->rate = data->rate * HZ / 1000;
|
|
|
|
return count;
|
|
}
|
|
|
|
#define show_type(flag) \
|
|
static ssize_t show_type##flag(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
snprintf(buf, PAGE_SIZE - 1, \
|
|
data->model & R##flag##MS_MASK ? "1\n" : "2\n"); \
|
|
return strlen(buf); \
|
|
}
|
|
show_type(1);
|
|
show_type(2);
|
|
|
|
#define show_min(flag) \
|
|
static ssize_t show_min##flag(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
snprintf(buf, PAGE_SIZE - 1, \
|
|
data->config & R##flag##DF_MASK ? \
|
|
"-127000\n" : "0\n"); \
|
|
return strlen(buf); \
|
|
}
|
|
show_min(1);
|
|
show_min(2);
|
|
|
|
#define show_max(flag) \
|
|
static ssize_t show_max##flag(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
snprintf(buf, PAGE_SIZE - 1, \
|
|
data->config & R##flag##DF_MASK ? \
|
|
"127000\n" : "255000\n"); \
|
|
return strlen(buf); \
|
|
}
|
|
show_max(1);
|
|
show_max(2);
|
|
|
|
#define set_type(flag) \
|
|
static ssize_t set_type##flag(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
long val; \
|
|
strict_strtol(buf, 10, &val); \
|
|
\
|
|
if ((val == 1) || (val == 2)) { \
|
|
\
|
|
mutex_lock(&data->update_lock); \
|
|
\
|
|
data->trutherm &= ~(TT_MASK << TT##flag##_SHIFT); \
|
|
if (val == 1) { \
|
|
data->model |= R##flag##MS_MASK; \
|
|
data->trutherm |= (TT_ON << TT##flag##_SHIFT); \
|
|
} \
|
|
else { \
|
|
data->model &= ~R##flag##MS_MASK; \
|
|
data->trutherm |= (TT_OFF << TT##flag##_SHIFT); \
|
|
} \
|
|
\
|
|
data->valid = 0; \
|
|
\
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, \
|
|
data->model); \
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, \
|
|
data->trutherm); \
|
|
\
|
|
mutex_unlock(&data->update_lock); \
|
|
\
|
|
} \
|
|
return count; \
|
|
}
|
|
set_type(1);
|
|
set_type(2);
|
|
|
|
#define set_min(flag) \
|
|
static ssize_t set_min##flag(struct device *dev, \
|
|
struct device_attribute *devattr, const char *buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
long val; \
|
|
strict_strtol(buf, 10, &val); \
|
|
\
|
|
mutex_lock(&data->update_lock); \
|
|
\
|
|
if (val < 0) \
|
|
data->config |= R##flag##DF_MASK; \
|
|
else \
|
|
data->config &= ~R##flag##DF_MASK; \
|
|
\
|
|
data->valid = 0; \
|
|
\
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
|
|
data->config); \
|
|
\
|
|
mutex_unlock(&data->update_lock); \
|
|
\
|
|
return count; \
|
|
}
|
|
set_min(1);
|
|
set_min(2);
|
|
|
|
#define set_max(flag) \
|
|
static ssize_t set_max##flag(struct device *dev, \
|
|
struct device_attribute *devattr, const char *buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct lm95241_data *data = i2c_get_clientdata(client); \
|
|
\
|
|
long val; \
|
|
strict_strtol(buf, 10, &val); \
|
|
\
|
|
mutex_lock(&data->update_lock); \
|
|
\
|
|
if (val <= 127000) \
|
|
data->config |= R##flag##DF_MASK; \
|
|
else \
|
|
data->config &= ~R##flag##DF_MASK; \
|
|
\
|
|
data->valid = 0; \
|
|
\
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
|
|
data->config); \
|
|
\
|
|
mutex_unlock(&data->update_lock); \
|
|
\
|
|
return count; \
|
|
}
|
|
set_max(1);
|
|
set_max(2);
|
|
|
|
static DEVICE_ATTR(temp1_input, S_IRUGO, show_local, NULL);
|
|
static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote1, NULL);
|
|
static DEVICE_ATTR(temp3_input, S_IRUGO, show_remote2, NULL);
|
|
static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type1, set_type1);
|
|
static DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type2, set_type2);
|
|
static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
|
|
static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
|
|
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
|
|
static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
|
|
static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate);
|
|
|
|
static struct attribute *lm95241_attributes[] = {
|
|
&dev_attr_temp1_input.attr,
|
|
&dev_attr_temp2_input.attr,
|
|
&dev_attr_temp3_input.attr,
|
|
&dev_attr_temp2_type.attr,
|
|
&dev_attr_temp3_type.attr,
|
|
&dev_attr_temp2_min.attr,
|
|
&dev_attr_temp3_min.attr,
|
|
&dev_attr_temp2_max.attr,
|
|
&dev_attr_temp3_max.attr,
|
|
&dev_attr_rate.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group lm95241_group = {
|
|
.attrs = lm95241_attributes,
|
|
};
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int lm95241_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int address = new_client->addr;
|
|
const char *name;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
|
|
== MANUFACTURER_ID)
|
|
&& (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
|
|
>= DEFAULT_REVISION)) {
|
|
name = "lm95241";
|
|
} else {
|
|
dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
|
|
address);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Fill the i2c board info */
|
|
strlcpy(info->type, name, I2C_NAME_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
static int lm95241_probe(struct i2c_client *new_client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lm95241_data *data;
|
|
int err;
|
|
|
|
data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL);
|
|
if (!data) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
i2c_set_clientdata(new_client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the LM95241 chip */
|
|
lm95241_init_client(new_client);
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group);
|
|
if (err)
|
|
goto exit_free;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&new_client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
sysfs_remove_group(&new_client->dev.kobj, &lm95241_group);
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void lm95241_init_client(struct i2c_client *client)
|
|
{
|
|
struct lm95241_data *data = i2c_get_clientdata(client);
|
|
|
|
data->rate = HZ; /* 1 sec default */
|
|
data->valid = 0;
|
|
data->config = CFG_CR0076;
|
|
data->model = 0;
|
|
data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
|
|
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG,
|
|
data->config);
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
|
|
R1FE_MASK | R2FE_MASK);
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
|
|
data->trutherm);
|
|
i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
|
|
data->model);
|
|
}
|
|
|
|
static int lm95241_remove(struct i2c_client *client)
|
|
{
|
|
struct lm95241_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&client->dev.kobj, &lm95241_group);
|
|
|
|
i2c_set_clientdata(client, NULL);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static struct lm95241_data *lm95241_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm95241_data *data = i2c_get_clientdata(client);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + data->rate) ||
|
|
!data->valid) {
|
|
dev_dbg(&client->dev, "Updating lm95241 data.\n");
|
|
data->local_h =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_LOCAL_TEMPH);
|
|
data->local_l =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_LOCAL_TEMPL);
|
|
data->remote1_h =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_REMOTE1_TEMPH);
|
|
data->remote1_l =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_REMOTE1_TEMPL);
|
|
data->remote2_h =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_REMOTE2_TEMPH);
|
|
data->remote2_l =
|
|
i2c_smbus_read_byte_data(client,
|
|
LM95241_REG_R_REMOTE2_TEMPL);
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/* Driver data (common to all clients) */
|
|
static const struct i2c_device_id lm95241_id[] = {
|
|
{ "lm95241", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm95241_id);
|
|
|
|
static struct i2c_driver lm95241_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "lm95241",
|
|
},
|
|
.probe = lm95241_probe,
|
|
.remove = lm95241_remove,
|
|
.id_table = lm95241_id,
|
|
.detect = lm95241_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
static int __init sensors_lm95241_init(void)
|
|
{
|
|
return i2c_add_driver(&lm95241_driver);
|
|
}
|
|
|
|
static void __exit sensors_lm95241_exit(void)
|
|
{
|
|
i2c_del_driver(&lm95241_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Davide Rizzo <elpa-rizzo@gmail.com>");
|
|
MODULE_DESCRIPTION("LM95241 sensor driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_lm95241_init);
|
|
module_exit(sensors_lm95241_exit);
|