mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 10:01:43 +00:00
3883cbb6c1
These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added. Conflicts: * asm/glue-proc.h has one CPU type getting added that conflicts with another addition in 3.10-rc7 * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0 o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2 ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu uWLAi92lL24= =0r9S -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
122 lines
3.3 KiB
Plaintext
122 lines
3.3 KiB
Plaintext
#
|
|
# PCI configuration
|
|
#
|
|
config ARCH_SUPPORTS_MSI
|
|
bool
|
|
|
|
config PCI_MSI
|
|
bool "Message Signaled Interrupts (MSI and MSI-X)"
|
|
depends on PCI
|
|
depends on ARCH_SUPPORTS_MSI
|
|
help
|
|
This allows device drivers to enable MSI (Message Signaled
|
|
Interrupts). Message Signaled Interrupts enable a device to
|
|
generate an interrupt using an inbound Memory Write on its
|
|
PCI bus instead of asserting a device IRQ pin.
|
|
|
|
Use of PCI MSI interrupts can be disabled at kernel boot time
|
|
by using the 'pci=nomsi' option. This disables MSI for the
|
|
entire system.
|
|
|
|
If you don't know what to do here, say Y.
|
|
|
|
config PCI_DEBUG
|
|
bool "PCI Debugging"
|
|
depends on PCI && DEBUG_KERNEL
|
|
help
|
|
Say Y here if you want the PCI core to produce a bunch of debug
|
|
messages to the system log. Select this if you are having a
|
|
problem with PCI support and want to see more of what is going on.
|
|
|
|
When in doubt, say N.
|
|
|
|
config PCI_REALLOC_ENABLE_AUTO
|
|
bool "Enable PCI resource re-allocation detection"
|
|
depends on PCI
|
|
help
|
|
Say Y here if you want the PCI core to detect if PCI resource
|
|
re-allocation needs to be enabled. You can always use pci=realloc=on
|
|
or pci=realloc=off to override it. Note this feature is a no-op
|
|
unless PCI_IOV support is also enabled; in that case it will
|
|
automatically re-allocate PCI resources if SR-IOV BARs have not
|
|
been allocated by the BIOS.
|
|
|
|
When in doubt, say N.
|
|
|
|
config PCI_STUB
|
|
tristate "PCI Stub driver"
|
|
depends on PCI
|
|
help
|
|
Say Y or M here if you want be able to reserve a PCI device
|
|
when it is going to be assigned to a guest operating system.
|
|
|
|
When in doubt, say N.
|
|
|
|
config XEN_PCIDEV_FRONTEND
|
|
tristate "Xen PCI Frontend"
|
|
depends on PCI && X86 && XEN
|
|
select PCI_XEN
|
|
select XEN_XENBUS_FRONTEND
|
|
default y
|
|
help
|
|
The PCI device frontend driver allows the kernel to import arbitrary
|
|
PCI devices from a PCI backend to support PCI driver domains.
|
|
|
|
config HT_IRQ
|
|
bool "Interrupts on hypertransport devices"
|
|
default y
|
|
depends on PCI && X86_LOCAL_APIC && X86_IO_APIC
|
|
help
|
|
This allows native hypertransport devices to use interrupts.
|
|
|
|
If unsure say Y.
|
|
|
|
config PCI_ATS
|
|
bool
|
|
|
|
config PCI_IOV
|
|
bool "PCI IOV support"
|
|
depends on PCI
|
|
select PCI_ATS
|
|
help
|
|
I/O Virtualization is a PCI feature supported by some devices
|
|
which allows them to create virtual devices which share their
|
|
physical resources.
|
|
|
|
If unsure, say N.
|
|
|
|
config PCI_PRI
|
|
bool "PCI PRI support"
|
|
depends on PCI
|
|
select PCI_ATS
|
|
help
|
|
PRI is the PCI Page Request Interface. It allows PCI devices that are
|
|
behind an IOMMU to recover from page faults.
|
|
|
|
If unsure, say N.
|
|
|
|
config PCI_PASID
|
|
bool "PCI PASID support"
|
|
depends on PCI
|
|
select PCI_ATS
|
|
help
|
|
Process Address Space Identifiers (PASIDs) can be used by PCI devices
|
|
to access more than one IO address space at the same time. To make
|
|
use of this feature an IOMMU is required which also supports PASIDs.
|
|
Select this option if you have such an IOMMU and want to compile the
|
|
driver for it into your kernel.
|
|
|
|
If unsure, say N.
|
|
|
|
config PCI_IOAPIC
|
|
tristate "PCI IO-APIC hotplug support" if X86
|
|
depends on PCI
|
|
depends on ACPI
|
|
default !X86
|
|
|
|
config PCI_LABEL
|
|
def_bool y if (DMI || ACPI)
|
|
select NLS
|
|
|
|
source "drivers/pci/host/Kconfig"
|