mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
7676e667c8
Rather than unconditionally registering the GPIO lookup table only do so for devices that require it. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> [Fixed up to also handle wm5102 and wm5102 reva] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
448 lines
12 KiB
C
448 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Speyside modules for Cragganmore - board data probing
|
|
//
|
|
// Copyright 2011 Wolfson Microelectronics plc
|
|
// Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/gpio/machine.h>
|
|
|
|
#include <linux/mfd/wm831x/irq.h>
|
|
#include <linux/mfd/wm831x/gpio.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/arizona/pdata.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <sound/wm0010.h>
|
|
#include <sound/wm2200.h>
|
|
#include <sound/wm5100.h>
|
|
#include <sound/wm8996.h>
|
|
#include <sound/wm8962.h>
|
|
#include <sound/wm9081.h>
|
|
|
|
#include <linux/platform_data/spi-s3c64xx.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "crag6410.h"
|
|
|
|
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
|
|
.line = S3C64XX_GPC(3),
|
|
};
|
|
|
|
static struct wm0010_pdata wm0010_pdata = {
|
|
.gpio_reset = S3C64XX_GPN(6),
|
|
.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
|
|
};
|
|
|
|
static struct spi_board_info wm1253_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm0010",
|
|
.max_speed_hz = 26 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
.irq = S3C_EINT(4),
|
|
.controller_data = &wm0010_spi_csinfo,
|
|
.platform_data = &wm0010_pdata,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info balblair_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm0010",
|
|
.max_speed_hz = 26 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
.irq = S3C_EINT(4),
|
|
.controller_data = &wm0010_spi_csinfo,
|
|
.platform_data = &wm0010_pdata,
|
|
},
|
|
};
|
|
|
|
static struct wm5100_pdata wm5100_pdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
|
|
.in_mode = {
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_DIFF,
|
|
WM5100_IN_SE,
|
|
},
|
|
|
|
.hp_pol = CODEC_GPIO_BASE + 3,
|
|
.jack_modes = {
|
|
{ WM5100_MICDET_MICBIAS3, 0, 0 },
|
|
{ WM5100_MICDET_MICBIAS2, 1, 1 },
|
|
},
|
|
|
|
.gpio_defaults = {
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0x2, /* IRQ: CMOS output */
|
|
0x3, /* CLKOUT: CMOS output */
|
|
},
|
|
};
|
|
|
|
static struct wm8996_retune_mobile_config wm8996_retune[] = {
|
|
{
|
|
.name = "Sub LPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
{
|
|
.name = "Sub HPF",
|
|
.rate = 48000,
|
|
.regs = {
|
|
0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
|
|
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
|
|
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct wm8996_pdata wm8996_pdata __initdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.micdet_def = 1,
|
|
.inl_mode = WM8996_DIFFERRENTIAL_1,
|
|
.inr_mode = WM8996_DIFFERRENTIAL_1,
|
|
|
|
.irq_flags = IRQF_TRIGGER_RISING,
|
|
|
|
.gpio_default = {
|
|
0x8001, /* GPIO1 == ADCLRCLK1 */
|
|
0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
|
|
0x0141, /* GPIO3 == HP_SEL */
|
|
0x0002, /* GPIO4 == IRQ */
|
|
0x020e, /* GPIO5 == CLKOUT */
|
|
},
|
|
|
|
.retune_mobile_cfgs = wm8996_retune,
|
|
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
|
|
};
|
|
|
|
static struct wm8962_pdata wm8962_pdata __initdata = {
|
|
.gpio_init = {
|
|
0,
|
|
WM8962_GPIO_FN_OPCLK,
|
|
WM8962_GPIO_FN_DMICCLK,
|
|
0,
|
|
0x8000 | WM8962_GPIO_FN_DMICDAT,
|
|
WM8962_GPIO_FN_IRQ, /* Open drain mode */
|
|
},
|
|
.in4_dc_measure = true,
|
|
};
|
|
|
|
static struct wm9081_pdata wm9081_pdata __initdata = {
|
|
.irq_high = false,
|
|
.irq_cmos = false,
|
|
};
|
|
|
|
static const struct i2c_board_info wm1254_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8996", 0x1a),
|
|
.platform_data = &wm8996_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1255_devs[] = {
|
|
{ I2C_BOARD_INFO("wm5100", 0x1a),
|
|
.platform_data = &wm5100_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static const struct i2c_board_info wm1259_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8962", 0x1a),
|
|
.platform_data = &wm8962_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data wm8994_ldo1 = {
|
|
.supply_regulator = "WALLVDD",
|
|
};
|
|
|
|
static struct regulator_init_data wm8994_ldo2 = {
|
|
.supply_regulator = "WALLVDD",
|
|
};
|
|
|
|
static struct wm8994_pdata wm8994_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.micb2_delay = 150,
|
|
.gpio_defaults = {
|
|
0x3, /* IRQ out, active high, CMOS */
|
|
},
|
|
.ldo = {
|
|
{ .init_data = &wm8994_ldo1, },
|
|
{ .init_data = &wm8994_ldo2, },
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm1277_devs[] = {
|
|
{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
|
|
.platform_data = &wm8994_pdata,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
|
|
.dev_name = "wm8958",
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm8994_gpiod_table = {
|
|
.dev_id = "i2c-wm8958", /* I2C device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 6,
|
|
"wlf,ldo1ena", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("GPION", 4,
|
|
"wlf,ldo2ena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct arizona_pdata wm5102_reva_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.micd_pol_gpio = CODEC_GPIO_BASE + 4,
|
|
.micd_rate = 6,
|
|
.gpio_defaults = {
|
|
[2] = 0x10000, /* AIF3TXLRCLK */
|
|
[3] = 0x4, /* OPCLK */
|
|
},
|
|
};
|
|
|
|
static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
|
|
.line = S3C64XX_GPN(5),
|
|
};
|
|
|
|
static struct spi_board_info wm5102_reva_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5102",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_reva_pdata,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
|
|
.dev_id = "spi0.1", /* SPI device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 7,
|
|
"wlf,ldoena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct arizona_pdata wm5102_pdata = {
|
|
.gpio_base = CODEC_GPIO_BASE,
|
|
.irq_flags = IRQF_TRIGGER_HIGH,
|
|
.micd_pol_gpio = CODEC_GPIO_BASE + 2,
|
|
.gpio_defaults = {
|
|
[2] = 0x10000, /* AIF3TXLRCLK */
|
|
[3] = 0x4, /* OPCLK */
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info wm5102_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5102",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_pdata,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table wm5102_gpiod_table = {
|
|
.dev_id = "spi0.1", /* SPI device name */
|
|
.table = {
|
|
GPIO_LOOKUP("GPION", 7,
|
|
"wlf,ldo1ena", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info wm5110_spi_devs[] = {
|
|
[0] = {
|
|
.modalias = "wm5110",
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 1,
|
|
.mode = SPI_MODE_0,
|
|
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
|
WM831X_IRQ_GPIO_2,
|
|
.controller_data = &codec_spi_csinfo,
|
|
.platform_data = &wm5102_reva_pdata,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm6230_i2c_devs[] = {
|
|
{ I2C_BOARD_INFO("wm9081", 0x6c),
|
|
.platform_data = &wm9081_pdata, },
|
|
};
|
|
|
|
static struct wm2200_pdata wm2200_pdata = {
|
|
.ldo_ena = S3C64XX_GPN(7),
|
|
.gpio_defaults = {
|
|
[2] = 0x0005, /* GPIO3 24.576MHz output clock */
|
|
},
|
|
};
|
|
|
|
static const struct i2c_board_info wm2200_i2c[] = {
|
|
{ I2C_BOARD_INFO("wm2200", 0x3a),
|
|
.platform_data = &wm2200_pdata, },
|
|
};
|
|
|
|
static const struct {
|
|
u8 id;
|
|
u8 rev;
|
|
const char *name;
|
|
const struct i2c_board_info *i2c_devs;
|
|
int num_i2c_devs;
|
|
const struct spi_board_info *spi_devs;
|
|
int num_spi_devs;
|
|
|
|
struct gpiod_lookup_table *gpiod_table;
|
|
} gf_mods[] = {
|
|
{ .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
|
|
{ .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
|
|
{ .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
|
|
{ .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
|
|
{ .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
|
|
.spi_devs = wm5110_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
|
|
{ .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
|
|
{ .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
|
|
{ .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
|
|
{ .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
|
|
{ .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
|
|
{ .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
|
|
{ .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
|
|
.i2c_devs = wm6230_i2c_devs,
|
|
.num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
|
|
{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
|
|
{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
|
|
{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
|
|
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
|
|
{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
|
|
{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
|
|
{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
|
|
.spi_devs = balblair_devs,
|
|
.num_spi_devs = ARRAY_SIZE(balblair_devs) },
|
|
{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
|
|
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
|
|
{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
|
|
.i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
|
|
{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
|
|
.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
|
|
{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
|
|
{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
|
|
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
|
|
.gpiod_table = &wm8994_gpiod_table },
|
|
{ .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
|
|
.spi_devs = wm5102_reva_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs),
|
|
.gpiod_table = &wm5102_reva_gpiod_table },
|
|
{ .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
|
|
.spi_devs = wm5102_spi_devs,
|
|
.num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
|
|
.gpiod_table = &wm5102_gpiod_table },
|
|
{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
|
|
.i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
|
|
};
|
|
|
|
static int wlf_gf_module_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
int ret, i, j, id, rev;
|
|
|
|
ret = i2c_smbus_read_byte_data(i2c, 0);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
id = (ret & 0xfe) >> 2;
|
|
rev = ret & 0x3;
|
|
for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
|
|
if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
|
|
rev == gf_mods[i].rev))
|
|
break;
|
|
|
|
gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
|
|
gpiod_add_lookup_table(&wm5102_gpiod_table);
|
|
gpiod_add_lookup_table(&wm8994_gpiod_table);
|
|
|
|
if (i < ARRAY_SIZE(gf_mods)) {
|
|
dev_info(&i2c->dev, "%s revision %d\n",
|
|
gf_mods[i].name, rev + 1);
|
|
|
|
for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
|
|
if (!i2c_new_device(i2c->adapter,
|
|
&(gf_mods[i].i2c_devs[j])))
|
|
dev_err(&i2c->dev,
|
|
"Failed to register dev: %d\n", ret);
|
|
}
|
|
|
|
spi_register_board_info(gf_mods[i].spi_devs,
|
|
gf_mods[i].num_spi_devs);
|
|
|
|
if (gf_mods[i].gpiod_table)
|
|
gpiod_add_lookup_table(gf_mods[i].gpiod_table);
|
|
} else {
|
|
dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
|
|
id, rev + 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wlf_gf_module_id[] = {
|
|
{ "wlf-gf-module", 0 },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver wlf_gf_module_driver = {
|
|
.driver = {
|
|
.name = "wlf-gf-module"
|
|
},
|
|
.probe = wlf_gf_module_probe,
|
|
.id_table = wlf_gf_module_id,
|
|
};
|
|
|
|
static int __init wlf_gf_module_register(void)
|
|
{
|
|
if (!soc_is_s3c64xx())
|
|
return 0;
|
|
|
|
return i2c_add_driver(&wlf_gf_module_driver);
|
|
}
|
|
device_initcall(wlf_gf_module_register);
|