mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
662 lines
15 KiB
C
662 lines
15 KiB
C
/*
|
|
* Device driver for the IIsi-style ADB on some Mac LC and II-class machines
|
|
*
|
|
* Based on via-cuda.c and via-macii.c, as well as the original
|
|
* adb-bus.c, which in turn is somewhat influenced by (but uses no
|
|
* code from) the NetBSD HWDIRECT ADB code. Original IIsi driver work
|
|
* was done by Robert Thompson and integrated into the old style
|
|
* driver by Michael Schmitz.
|
|
*
|
|
* Original sources (c) Alan Cox, Paul Mackerras, and others.
|
|
*
|
|
* Rewritten for Unified ADB by David Huggins-Daines <dhd@debian.org>
|
|
*
|
|
* 7/13/2000- extensive changes by Andrew McPherson <andrew@macduff.dhs.org>
|
|
* Works about 30% of the time now.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/cuda.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/macintosh.h>
|
|
#include <asm/macints.h>
|
|
#include <asm/machw.h>
|
|
#include <asm/mac_via.h>
|
|
|
|
static volatile unsigned char *via;
|
|
|
|
/* VIA registers - spaced 0x200 bytes apart - only the ones we actually use */
|
|
#define RS 0x200 /* skip between registers */
|
|
#define B 0 /* B-side data */
|
|
#define A RS /* A-side data */
|
|
#define DIRB (2*RS) /* B-side direction (1=output) */
|
|
#define DIRA (3*RS) /* A-side direction (1=output) */
|
|
#define SR (10*RS) /* Shift register */
|
|
#define ACR (11*RS) /* Auxiliary control register */
|
|
#define IFR (13*RS) /* Interrupt flag register */
|
|
#define IER (14*RS) /* Interrupt enable register */
|
|
|
|
/* Bits in B data register: all active low */
|
|
#define TREQ 0x08 /* Transfer request (input) */
|
|
#define TACK 0x10 /* Transfer acknowledge (output) */
|
|
#define TIP 0x20 /* Transfer in progress (output) */
|
|
#define ST_MASK 0x30 /* mask for selecting ADB state bits */
|
|
|
|
/* Bits in ACR */
|
|
#define SR_CTRL 0x1c /* Shift register control bits */
|
|
#define SR_EXT 0x0c /* Shift on external clock */
|
|
#define SR_OUT 0x10 /* Shift out if 1 */
|
|
|
|
/* Bits in IFR and IER */
|
|
#define IER_SET 0x80 /* set bits in IER */
|
|
#define IER_CLR 0 /* clear bits in IER */
|
|
#define SR_INT 0x04 /* Shift register full/empty */
|
|
#define SR_DATA 0x08 /* Shift register data */
|
|
#define SR_CLOCK 0x10 /* Shift register clock */
|
|
|
|
#define ADB_DELAY 150
|
|
|
|
#undef DEBUG_MACIISI_ADB
|
|
|
|
static struct adb_request* current_req = NULL;
|
|
static struct adb_request* last_req = NULL;
|
|
static unsigned char maciisi_rbuf[16];
|
|
static unsigned char *reply_ptr = NULL;
|
|
static int data_index;
|
|
static int reading_reply;
|
|
static int reply_len;
|
|
static int tmp;
|
|
static int need_sync;
|
|
|
|
static enum maciisi_state {
|
|
idle,
|
|
sending,
|
|
reading,
|
|
} maciisi_state;
|
|
|
|
static int maciisi_probe(void);
|
|
static int maciisi_init(void);
|
|
static int maciisi_send_request(struct adb_request* req, int sync);
|
|
static void maciisi_sync(struct adb_request *req);
|
|
static int maciisi_write(struct adb_request* req);
|
|
static irqreturn_t maciisi_interrupt(int irq, void* arg, struct pt_regs* regs);
|
|
static void maciisi_input(unsigned char *buf, int nb, struct pt_regs *regs);
|
|
static int maciisi_init_via(void);
|
|
static void maciisi_poll(void);
|
|
static int maciisi_start(void);
|
|
|
|
struct adb_driver via_maciisi_driver = {
|
|
"Mac IIsi",
|
|
maciisi_probe,
|
|
maciisi_init,
|
|
maciisi_send_request,
|
|
NULL, /* maciisi_adb_autopoll, */
|
|
maciisi_poll,
|
|
NULL /* maciisi_reset_adb_bus */
|
|
};
|
|
|
|
static int
|
|
maciisi_probe(void)
|
|
{
|
|
if (macintosh_config->adb_type != MAC_ADB_IISI)
|
|
return -ENODEV;
|
|
|
|
via = via1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
maciisi_init(void)
|
|
{
|
|
int err;
|
|
|
|
if (via == NULL)
|
|
return -ENODEV;
|
|
|
|
if ((err = maciisi_init_via())) {
|
|
printk(KERN_ERR "maciisi_init: maciisi_init_via() failed, code %d\n", err);
|
|
via = NULL;
|
|
return err;
|
|
}
|
|
|
|
if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST,
|
|
"ADB", maciisi_interrupt)) {
|
|
printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
printk("adb: Mac IIsi driver v0.2 for Unified ADB.\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Flush data from the ADB controller */
|
|
static void
|
|
maciisi_stfu(void)
|
|
{
|
|
int status = via[B] & (TIP|TREQ);
|
|
|
|
if (status & TREQ) {
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk (KERN_DEBUG "maciisi_stfu called with TREQ high!\n");
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
udelay(ADB_DELAY);
|
|
via[ACR] &= ~SR_OUT;
|
|
via[IER] = IER_CLR | SR_INT;
|
|
|
|
udelay(ADB_DELAY);
|
|
|
|
status = via[B] & (TIP|TREQ);
|
|
|
|
if (!(status & TREQ))
|
|
{
|
|
via[B] |= TIP;
|
|
|
|
while(1)
|
|
{
|
|
int poll_timeout = ADB_DELAY * 5;
|
|
/* Poll for SR interrupt */
|
|
while (!(via[IFR] & SR_INT) && poll_timeout-- > 0)
|
|
status = via[B] & (TIP|TREQ);
|
|
|
|
tmp = via[SR]; /* Clear shift register */
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_stfu: status %x timeout %d data %x\n",
|
|
status, poll_timeout, tmp);
|
|
#endif
|
|
if(via[B] & TREQ)
|
|
break;
|
|
|
|
/* ACK on-off */
|
|
via[B] |= TACK;
|
|
udelay(ADB_DELAY);
|
|
via[B] &= ~TACK;
|
|
}
|
|
|
|
/* end frame */
|
|
via[B] &= ~TIP;
|
|
udelay(ADB_DELAY);
|
|
}
|
|
|
|
via[IER] = IER_SET | SR_INT;
|
|
}
|
|
|
|
/* All specifically VIA-related initialization goes here */
|
|
static int
|
|
maciisi_init_via(void)
|
|
{
|
|
int i;
|
|
|
|
/* Set the lines up. We want TREQ as input TACK|TIP as output */
|
|
via[DIRB] = (via[DIRB] | TACK | TIP) & ~TREQ;
|
|
/* Shift register on input */
|
|
via[ACR] = (via[ACR] & ~SR_CTRL) | SR_EXT;
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_init_via: initial status %x\n", via[B] & (TIP|TREQ));
|
|
#endif
|
|
/* Wipe any pending data and int */
|
|
tmp = via[SR];
|
|
/* Enable keyboard interrupts */
|
|
via[IER] = IER_SET | SR_INT;
|
|
/* Set initial state: idle */
|
|
via[B] &= ~(TACK|TIP);
|
|
/* Clear interrupt bit */
|
|
via[IFR] = SR_INT;
|
|
|
|
for(i = 0; i < 60; i++) {
|
|
udelay(ADB_DELAY);
|
|
maciisi_stfu();
|
|
udelay(ADB_DELAY);
|
|
if(via[B] & TREQ)
|
|
break;
|
|
}
|
|
if (i == 60)
|
|
printk(KERN_ERR "maciisi_init_via: bus jam?\n");
|
|
|
|
maciisi_state = idle;
|
|
need_sync = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Send a request, possibly waiting for a reply */
|
|
static int
|
|
maciisi_send_request(struct adb_request* req, int sync)
|
|
{
|
|
int i;
|
|
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
static int dump_packet = 0;
|
|
#endif
|
|
|
|
if (via == NULL) {
|
|
req->complete = 1;
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
if (dump_packet) {
|
|
printk(KERN_DEBUG "maciisi_send_request:");
|
|
for (i = 0; i < req->nbytes; i++) {
|
|
printk(" %.2x", req->data[i]);
|
|
}
|
|
printk(" sync %d\n", sync);
|
|
}
|
|
#endif
|
|
|
|
req->reply_expected = 1;
|
|
|
|
i = maciisi_write(req);
|
|
if (i)
|
|
{
|
|
/* Normally, if a packet requires syncing, that happens at the end of
|
|
* maciisi_send_request. But if the transfer fails, it will be restarted
|
|
* by maciisi_interrupt(). We use need_sync to tell maciisi_interrupt
|
|
* when to sync a packet that it sends out.
|
|
*
|
|
* Suggestions on a better way to do this are welcome.
|
|
*/
|
|
if(i == -EBUSY && sync)
|
|
need_sync = 1;
|
|
else
|
|
need_sync = 0;
|
|
return i;
|
|
}
|
|
if(sync)
|
|
maciisi_sync(req);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Poll the ADB chip until the request completes */
|
|
static void maciisi_sync(struct adb_request *req)
|
|
{
|
|
int count = 0;
|
|
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_sync called\n");
|
|
#endif
|
|
|
|
/* If for some reason the ADB chip shuts up on us, we want to avoid an endless loop. */
|
|
while (!req->complete && count++ < 50) {
|
|
maciisi_poll();
|
|
}
|
|
/* This could be BAD... when the ADB controller doesn't respond
|
|
* for this long, it's probably not coming back :-( */
|
|
if(count >= 50) /* Hopefully shouldn't happen */
|
|
printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
|
|
}
|
|
|
|
/* Enqueue a request, and run the queue if possible */
|
|
static int
|
|
maciisi_write(struct adb_request* req)
|
|
{
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/* We will accept CUDA packets - the VIA sends them to us, so
|
|
it figures that we should be able to send them to it */
|
|
if (req->nbytes < 2 || req->data[0] > CUDA_PACKET) {
|
|
printk(KERN_ERR "maciisi_write: packet too small or not an ADB or CUDA packet\n");
|
|
req->complete = 1;
|
|
return -EINVAL;
|
|
}
|
|
req->next = 0;
|
|
req->sent = 0;
|
|
req->complete = 0;
|
|
req->reply_len = 0;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (current_req) {
|
|
last_req->next = req;
|
|
last_req = req;
|
|
} else {
|
|
current_req = req;
|
|
last_req = req;
|
|
}
|
|
if (maciisi_state == idle)
|
|
{
|
|
i = maciisi_start();
|
|
if(i != 0)
|
|
{
|
|
local_irq_restore(flags);
|
|
return i;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_write: would start, but state is %d\n", maciisi_state);
|
|
#endif
|
|
local_irq_restore(flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
maciisi_start(void)
|
|
{
|
|
struct adb_request* req;
|
|
int status;
|
|
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
status = via[B] & (TIP | TREQ);
|
|
|
|
printk(KERN_DEBUG "maciisi_start called, state=%d, status=%x, ifr=%x\n", maciisi_state, status, via[IFR]);
|
|
#endif
|
|
|
|
if (maciisi_state != idle) {
|
|
/* shouldn't happen */
|
|
printk(KERN_ERR "maciisi_start: maciisi_start called when driver busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
req = current_req;
|
|
if (req == NULL)
|
|
return -EINVAL;
|
|
|
|
status = via[B] & (TIP|TREQ);
|
|
if (!(status & TREQ)) {
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_start: bus busy - aborting\n");
|
|
#endif
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Okay, send */
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "maciisi_start: sending\n");
|
|
#endif
|
|
/* Set state to active */
|
|
via[B] |= TIP;
|
|
/* ACK off */
|
|
via[B] &= ~TACK;
|
|
/* Delay */
|
|
udelay(ADB_DELAY);
|
|
/* Shift out and send */
|
|
via[ACR] |= SR_OUT;
|
|
via[SR] = req->data[0];
|
|
data_index = 1;
|
|
/* ACK on */
|
|
via[B] |= TACK;
|
|
maciisi_state = sending;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
maciisi_poll(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
if (via[IFR] & SR_INT) {
|
|
maciisi_interrupt(0, 0, 0);
|
|
}
|
|
else /* avoid calling this function too quickly in a loop */
|
|
udelay(ADB_DELAY);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/* Shift register interrupt - this is *supposed* to mean that the
|
|
register is either full or empty. In practice, I have no idea what
|
|
it means :( */
|
|
static irqreturn_t
|
|
maciisi_interrupt(int irq, void* arg, struct pt_regs* regs)
|
|
{
|
|
int status;
|
|
struct adb_request *req;
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
static int dump_reply = 0;
|
|
#endif
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
status = via[B] & (TIP|TREQ);
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "state %d status %x ifr %x\n", maciisi_state, status, via[IFR]);
|
|
#endif
|
|
|
|
if (!(via[IFR] & SR_INT)) {
|
|
/* Shouldn't happen, we hope */
|
|
printk(KERN_ERR "maciisi_interrupt: called without interrupt flag set\n");
|
|
local_irq_restore(flags);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Clear the interrupt */
|
|
/* via[IFR] = SR_INT; */
|
|
|
|
switch_start:
|
|
switch (maciisi_state) {
|
|
case idle:
|
|
if (status & TIP)
|
|
printk(KERN_ERR "maciisi_interrupt: state is idle but TIP asserted!\n");
|
|
|
|
if(!reading_reply)
|
|
udelay(ADB_DELAY);
|
|
/* Shift in */
|
|
via[ACR] &= ~SR_OUT;
|
|
/* Signal start of frame */
|
|
via[B] |= TIP;
|
|
/* Clear the interrupt (throw this value on the floor, it's useless) */
|
|
tmp = via[SR];
|
|
/* ACK adb chip, high-low */
|
|
via[B] |= TACK;
|
|
udelay(ADB_DELAY);
|
|
via[B] &= ~TACK;
|
|
reply_len = 0;
|
|
maciisi_state = reading;
|
|
if (reading_reply) {
|
|
reply_ptr = current_req->reply;
|
|
} else {
|
|
reply_ptr = maciisi_rbuf;
|
|
}
|
|
break;
|
|
|
|
case sending:
|
|
/* via[SR]; */
|
|
/* Set ACK off */
|
|
via[B] &= ~TACK;
|
|
req = current_req;
|
|
|
|
if (!(status & TREQ)) {
|
|
/* collision */
|
|
printk(KERN_ERR "maciisi_interrupt: send collision\n");
|
|
/* Set idle and input */
|
|
via[ACR] &= ~SR_OUT;
|
|
tmp = via[SR];
|
|
via[B] &= ~TIP;
|
|
/* Must re-send */
|
|
reading_reply = 0;
|
|
reply_len = 0;
|
|
maciisi_state = idle;
|
|
udelay(ADB_DELAY);
|
|
/* process this now, because the IFR has been cleared */
|
|
goto switch_start;
|
|
}
|
|
|
|
udelay(ADB_DELAY);
|
|
|
|
if (data_index >= req->nbytes) {
|
|
/* Sent the whole packet, put the bus back in idle state */
|
|
/* Shift in, we are about to read a reply (hopefully) */
|
|
via[ACR] &= ~SR_OUT;
|
|
tmp = via[SR];
|
|
/* End of frame */
|
|
via[B] &= ~TIP;
|
|
req->sent = 1;
|
|
maciisi_state = idle;
|
|
if (req->reply_expected) {
|
|
/* Note: only set this once we've
|
|
successfully sent the packet */
|
|
reading_reply = 1;
|
|
} else {
|
|
current_req = req->next;
|
|
if (req->done)
|
|
(*req->done)(req);
|
|
/* Do any queued requests now */
|
|
i = maciisi_start();
|
|
if(i == 0 && need_sync) {
|
|
/* Packet needs to be synced */
|
|
maciisi_sync(current_req);
|
|
}
|
|
if(i != -EBUSY)
|
|
need_sync = 0;
|
|
}
|
|
} else {
|
|
/* Sending more stuff */
|
|
/* Shift out */
|
|
via[ACR] |= SR_OUT;
|
|
/* Write */
|
|
via[SR] = req->data[data_index++];
|
|
/* Signal 'byte ready' */
|
|
via[B] |= TACK;
|
|
}
|
|
break;
|
|
|
|
case reading:
|
|
/* Shift in */
|
|
/* via[ACR] &= ~SR_OUT; */ /* Not in 2.2 */
|
|
if (reply_len++ > 16) {
|
|
printk(KERN_ERR "maciisi_interrupt: reply too long, aborting read\n");
|
|
via[B] |= TACK;
|
|
udelay(ADB_DELAY);
|
|
via[B] &= ~(TACK|TIP);
|
|
maciisi_state = idle;
|
|
i = maciisi_start();
|
|
if(i == 0 && need_sync) {
|
|
/* Packet needs to be synced */
|
|
maciisi_sync(current_req);
|
|
}
|
|
if(i != -EBUSY)
|
|
need_sync = 0;
|
|
break;
|
|
}
|
|
/* Read data */
|
|
*reply_ptr++ = via[SR];
|
|
status = via[B] & (TIP|TREQ);
|
|
/* ACK on/off */
|
|
via[B] |= TACK;
|
|
udelay(ADB_DELAY);
|
|
via[B] &= ~TACK;
|
|
if (!(status & TREQ))
|
|
break; /* more stuff to deal with */
|
|
|
|
/* end of frame */
|
|
via[B] &= ~TIP;
|
|
tmp = via[SR]; /* That's what happens in 2.2 */
|
|
udelay(ADB_DELAY); /* Give controller time to recover */
|
|
|
|
/* end of packet, deal with it */
|
|
if (reading_reply) {
|
|
req = current_req;
|
|
req->reply_len = reply_ptr - req->reply;
|
|
if (req->data[0] == ADB_PACKET) {
|
|
/* Have to adjust the reply from ADB commands */
|
|
if (req->reply_len <= 2 || (req->reply[1] & 2) != 0) {
|
|
/* the 0x2 bit indicates no response */
|
|
req->reply_len = 0;
|
|
} else {
|
|
/* leave just the command and result bytes in the reply */
|
|
req->reply_len -= 2;
|
|
memmove(req->reply, req->reply + 2, req->reply_len);
|
|
}
|
|
}
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
if (dump_reply) {
|
|
int i;
|
|
printk(KERN_DEBUG "maciisi_interrupt: reply is ");
|
|
for (i = 0; i < req->reply_len; ++i)
|
|
printk(" %.2x", req->reply[i]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
req->complete = 1;
|
|
current_req = req->next;
|
|
if (req->done)
|
|
(*req->done)(req);
|
|
/* Obviously, we got it */
|
|
reading_reply = 0;
|
|
} else {
|
|
maciisi_input(maciisi_rbuf, reply_ptr - maciisi_rbuf, regs);
|
|
}
|
|
maciisi_state = idle;
|
|
status = via[B] & (TIP|TREQ);
|
|
if (!(status & TREQ)) {
|
|
/* Timeout?! More likely, another packet coming in already */
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "extra data after packet: status %x ifr %x\n",
|
|
status, via[IFR]);
|
|
#endif
|
|
#if 0
|
|
udelay(ADB_DELAY);
|
|
via[B] |= TIP;
|
|
|
|
maciisi_state = reading;
|
|
reading_reply = 0;
|
|
reply_ptr = maciisi_rbuf;
|
|
#else
|
|
/* Process the packet now */
|
|
reading_reply = 0;
|
|
goto switch_start;
|
|
#endif
|
|
/* We used to do this... but the controller might actually have data for us */
|
|
/* maciisi_stfu(); */
|
|
}
|
|
else {
|
|
/* Do any queued requests now if possible */
|
|
i = maciisi_start();
|
|
if(i == 0 && need_sync) {
|
|
/* Packet needs to be synced */
|
|
maciisi_sync(current_req);
|
|
}
|
|
if(i != -EBUSY)
|
|
need_sync = 0;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printk("maciisi_interrupt: unknown maciisi_state %d?\n", maciisi_state);
|
|
}
|
|
local_irq_restore(flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
maciisi_input(unsigned char *buf, int nb, struct pt_regs *regs)
|
|
{
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
int i;
|
|
#endif
|
|
|
|
switch (buf[0]) {
|
|
case ADB_PACKET:
|
|
adb_input(buf+2, nb-2, regs, buf[1] & 0x40);
|
|
break;
|
|
default:
|
|
#ifdef DEBUG_MACIISI_ADB
|
|
printk(KERN_DEBUG "data from IIsi ADB (%d bytes):", nb);
|
|
for (i = 0; i < nb; ++i)
|
|
printk(" %.2x", buf[i]);
|
|
printk("\n");
|
|
#endif
|
|
break;
|
|
}
|
|
}
|