linux/arch/powerpc/platforms/pseries/smp.c
Michael Ellerman 36f8a2c4c6 [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries
Add a DEBUG config setting which turns on all (most) of the debugging
under platforms/pseries.

To have this take effect we need to remove all the #undef DEBUG's, in
various files. We leave the #undef DEBUG in platforms/pseries/lpar.c,
as this enables debugging printks from the low-level hash table routines,
and tends to make your system unusable. If you want those enabled you
still have to turn them on by hand.

Also some of the RAS code has a DEBUG block which causes a functional
change, so I've keyed this off a different (non-existant) debug #define.

This is only enabled if you have PPC_EARLY_DEBUG enabled also.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:12 +10:00

269 lines
5.9 KiB
C

/*
* SMP support for pSeries machines.
*
* Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
*
* Plus various changes from other IBM teams...
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include "xics.h"
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/pSeries_reconfig.h>
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
#include "plpar_wrappers.h"
#include "pseries.h"
/*
* The primary thread of each non-boot processor is recorded here before
* smp init.
*/
static cpumask_t of_spin_map;
extern void generic_secondary_smp_init(unsigned long);
/**
* smp_startup_cpu() - start the given cpu
*
* At boot time, there is nothing to do for primary threads which were
* started from Open Firmware. For anything else, call RTAS with the
* appropriate start location.
*
* Returns:
* 0 - failure
* 1 - success
*/
static inline int __devinit smp_startup_cpu(unsigned int lcpu)
{
int status;
unsigned long start_here = __pa((u32)*((unsigned long *)
generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
if (cpu_isset(lcpu, of_spin_map))
/* Already started by OF and sitting in spin loop */
return 1;
pcpu = get_hard_smp_processor_id(lcpu);
/* Fixup atomic count: it exited inside IRQ handler. */
task_thread_info(paca[lcpu].__current)->preempt_count = 0;
/*
* If the RTAS start-cpu token does not exist then presume the
* cpu is already spinning.
*/
start_cpu = rtas_token("start-cpu");
if (start_cpu == RTAS_UNKNOWN_SERVICE)
return 1;
status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
if (status != 0) {
printk(KERN_ERR "start-cpu failed: %i\n", status);
return 0;
}
return 1;
}
#ifdef CONFIG_XICS
static inline void smp_xics_do_message(int cpu, int msg)
{
set_bit(msg, &xics_ipi_message[cpu].value);
mb();
xics_cause_IPI(cpu);
}
static void smp_xics_message_pass(int target, int msg)
{
unsigned int i;
if (target < NR_CPUS) {
smp_xics_do_message(target, msg);
} else {
for_each_online_cpu(i) {
if (target == MSG_ALL_BUT_SELF
&& i == smp_processor_id())
continue;
smp_xics_do_message(i, msg);
}
}
}
static int __init smp_xics_probe(void)
{
xics_request_IPIs();
return cpus_weight(cpu_possible_map);
}
static void __devinit smp_xics_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
xics_setup_cpu();
if (firmware_has_feature(FW_FEATURE_SPLPAR))
vpa_init(cpu);
cpu_clear(cpu, of_spin_map);
}
#endif /* CONFIG_XICS */
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase = 0;
static void __devinit pSeries_give_timebase(void)
{
spin_lock(&timebase_lock);
rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
}
static void __devinit pSeries_take_timebase(void)
{
while (!timebase)
barrier();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
if (!smp_startup_cpu(nr))
return;
/*
* The processor is currently spinning, waiting for the
* cpu_start field to become non-zero After we set cpu_start,
* the processor will continue on to secondary_start
*/
paca[nr].cpu_start = 1;
}
static int smp_pSeries_cpu_bootable(unsigned int nr)
{
/* Special case - we inhibit secondary thread startup
* during boot if the user requests it. Odd-numbered
* cpus are assumed to be secondary threads.
*/
if (system_state < SYSTEM_RUNNING &&
cpu_has_feature(CPU_FTR_SMT) &&
!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
return 0;
return 1;
}
#ifdef CONFIG_MPIC
static struct smp_ops_t pSeries_mpic_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
};
#endif
#ifdef CONFIG_XICS
static struct smp_ops_t pSeries_xics_smp_ops = {
.message_pass = smp_xics_message_pass,
.probe = smp_xics_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_xics_setup_cpu,
.cpu_bootable = smp_pSeries_cpu_bootable,
};
#endif
/* This is called very early */
static void __init smp_init_pseries(void)
{
int i;
pr_debug(" -> smp_init_pSeries()\n");
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
if (i % 2 == 0)
/*
* Even-numbered logical cpus correspond to
* primary threads.
*/
cpu_set(i, of_spin_map);
}
} else {
of_spin_map = cpu_present_map;
}
cpu_clear(boot_cpuid, of_spin_map);
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
smp_ops->give_timebase = pSeries_give_timebase;
smp_ops->take_timebase = pSeries_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
}
#ifdef CONFIG_MPIC
void __init smp_init_pseries_mpic(void)
{
smp_ops = &pSeries_mpic_smp_ops;
smp_init_pseries();
}
#endif
void __init smp_init_pseries_xics(void)
{
smp_ops = &pSeries_xics_smp_ops;
smp_init_pseries();
}