mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
0937282036
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
116 lines
3.6 KiB
C
116 lines
3.6 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2004-2006 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.emulex.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
*******************************************************************/
|
|
|
|
#ifndef _H_LPFC_VPORT
|
|
#define _H_LPFC_VPORT
|
|
|
|
/* API version values (each will be an individual bit) */
|
|
#define VPORT_API_VERSION_1 0x01
|
|
|
|
/* Values returned via lpfc_vport_getinfo() */
|
|
struct vport_info {
|
|
|
|
uint32_t api_versions;
|
|
uint8_t linktype;
|
|
#define VPORT_TYPE_PHYSICAL 0
|
|
#define VPORT_TYPE_VIRTUAL 1
|
|
|
|
uint8_t state;
|
|
#define VPORT_STATE_OFFLINE 0
|
|
#define VPORT_STATE_ACTIVE 1
|
|
#define VPORT_STATE_FAILED 2
|
|
|
|
uint8_t fail_reason;
|
|
uint8_t prev_fail_reason;
|
|
#define VPORT_FAIL_UNKNOWN 0
|
|
#define VPORT_FAIL_LINKDOWN 1
|
|
#define VPORT_FAIL_FAB_UNSUPPORTED 2
|
|
#define VPORT_FAIL_FAB_NORESOURCES 3
|
|
#define VPORT_FAIL_FAB_LOGOUT 4
|
|
#define VPORT_FAIL_ADAP_NORESOURCES 5
|
|
|
|
uint8_t node_name[8]; /* WWNN */
|
|
uint8_t port_name[8]; /* WWPN */
|
|
|
|
struct Scsi_Host *shost;
|
|
|
|
/* Following values are valid only on physical links */
|
|
uint32_t vports_max;
|
|
uint32_t vports_inuse;
|
|
uint32_t rpi_max;
|
|
uint32_t rpi_inuse;
|
|
#define VPORT_CNT_INVALID 0xFFFFFFFF
|
|
};
|
|
|
|
/* data used in link creation */
|
|
struct vport_data {
|
|
uint32_t api_version;
|
|
|
|
uint32_t options;
|
|
#define VPORT_OPT_AUTORETRY 0x01
|
|
|
|
uint8_t node_name[8]; /* WWNN */
|
|
uint8_t port_name[8]; /* WWPN */
|
|
|
|
/*
|
|
* Upon successful creation, vport_shost will point to the new Scsi_Host
|
|
* structure for the new virtual link.
|
|
*/
|
|
struct Scsi_Host *vport_shost;
|
|
};
|
|
|
|
/* API function return codes */
|
|
#define VPORT_OK 0
|
|
#define VPORT_ERROR -1
|
|
#define VPORT_INVAL -2
|
|
#define VPORT_NOMEM -3
|
|
#define VPORT_NORESOURCES -4
|
|
|
|
int lpfc_vport_create(struct fc_vport *, bool);
|
|
int lpfc_vport_delete(struct fc_vport *);
|
|
int lpfc_vport_getinfo(struct Scsi_Host *, struct vport_info *);
|
|
int lpfc_vport_tgt_remove(struct Scsi_Host *, uint, uint);
|
|
struct lpfc_vport **lpfc_create_vport_work_array(struct lpfc_hba *);
|
|
void lpfc_destroy_vport_work_array(struct lpfc_hba *, struct lpfc_vport **);
|
|
|
|
/*
|
|
* queuecommand VPORT-specific return codes. Specified in the host byte code.
|
|
* Returned when the virtual link has failed or is not active.
|
|
*/
|
|
#define DID_VPORT_ERROR 0x0f
|
|
|
|
#define VPORT_INFO 0x1
|
|
#define VPORT_CREATE 0x2
|
|
#define VPORT_DELETE 0x4
|
|
|
|
struct vport_cmd_tag {
|
|
uint32_t cmd;
|
|
struct vport_data cdata;
|
|
struct vport_info cinfo;
|
|
void *vport;
|
|
int vport_num;
|
|
};
|
|
|
|
void lpfc_vport_set_state(struct lpfc_vport *vport,
|
|
enum fc_vport_state new_state);
|
|
|
|
#endif /* H_LPFC_VPORT */
|