mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
ba9cb7b9ff
Merge "ARM: keystone: add TI SCI protocol support for v4.10" from Tero Kristo: [description taken from http://processors.wiki.ti.com/index.php/TISCI Texas Instruments' Keystone generation System on Chips (SoC) starting with 66AK2G02, now include a dedicated SoC System Control entity called PMMC(Power Management Micro Controller) in line with ARM architecture recommendations. The function of this module is to integrate all system operations in a centralized location. Communication with the SoC System Control entity from various processing units like ARM/DSP occurs over Message Manager hardware block. ... Texas Instruments' System Control Interface defines the communication protocol between various processing entities to the System Control Entity on TI SoCs. This is a set of message formats and sequence of operations required to communicate and get system services processed from System Control entity in the SoC.] * 'for-4.10-ti-sci-base' of https://github.com/t-kristo/linux-pm: firmware: ti_sci: Add support for reboot core service firmware: ti_sci: Add support for Clock control firmware: ti_sci: Add support for Device control firmware: Add basic support for TI System Control Interface (TI-SCI) protocol Documentation: Add support for TI System Control Interface (TI-SCI) protocol
242 lines
8.0 KiB
Plaintext
242 lines
8.0 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see Documentation/kbuild/kconfig-language.txt.
|
|
#
|
|
|
|
menu "Firmware Drivers"
|
|
|
|
config ARM_PSCI_FW
|
|
bool
|
|
|
|
config ARM_PSCI_CHECKER
|
|
bool "ARM PSCI checker"
|
|
depends on ARM_PSCI_FW && HOTPLUG_CPU && !TORTURE_TEST
|
|
help
|
|
Run the PSCI checker during startup. This checks that hotplug and
|
|
suspend operations work correctly when using PSCI.
|
|
|
|
The torture tests may interfere with the PSCI checker by turning CPUs
|
|
on and off through hotplug, so for now torture tests and PSCI checker
|
|
are mutually exclusive.
|
|
|
|
config ARM_SCPI_PROTOCOL
|
|
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
|
|
depends on MAILBOX
|
|
help
|
|
System Control and Power Interface (SCPI) Message Protocol is
|
|
defined for the purpose of communication between the Application
|
|
Cores(AP) and the System Control Processor(SCP). The MHU peripheral
|
|
provides a mechanism for inter-processor communication between SCP
|
|
and AP.
|
|
|
|
SCP controls most of the power managament on the Application
|
|
Processors. It offers control and management of: the core/cluster
|
|
power states, various power domain DVFS including the core/cluster,
|
|
certain system clocks configuration, thermal sensors and many
|
|
others.
|
|
|
|
This protocol library provides interface for all the client drivers
|
|
making use of the features offered by the SCP.
|
|
|
|
config ARM_SCPI_POWER_DOMAIN
|
|
tristate "SCPI power domain driver"
|
|
depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
|
|
default y
|
|
select PM_GENERIC_DOMAINS if PM
|
|
help
|
|
This enables support for the SCPI power domains which can be
|
|
enabled or disabled via the SCP firmware
|
|
|
|
config EDD
|
|
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
|
|
depends on X86
|
|
help
|
|
Say Y or M here if you want to enable BIOS Enhanced Disk Drive
|
|
Services real mode BIOS calls to determine which disk
|
|
BIOS tries boot from. This information is then exported via sysfs.
|
|
|
|
This option is experimental and is known to fail to boot on some
|
|
obscure configurations. Most disk controller BIOS vendors do
|
|
not yet implement this feature.
|
|
|
|
config EDD_OFF
|
|
bool "Sets default behavior for EDD detection to off"
|
|
depends on EDD
|
|
default n
|
|
help
|
|
Say Y if you want EDD disabled by default, even though it is compiled into the
|
|
kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
|
|
using the kernel parameter 'edd={on|skipmbr|off}'.
|
|
|
|
config FIRMWARE_MEMMAP
|
|
bool "Add firmware-provided memory map to sysfs" if EXPERT
|
|
default X86
|
|
help
|
|
Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
|
|
That memory map is used for example by kexec to set up parameter area
|
|
for the next kernel, but can also be used for debugging purposes.
|
|
|
|
See also Documentation/ABI/testing/sysfs-firmware-memmap.
|
|
|
|
config EFI_PCDP
|
|
bool "Console device selection via EFI PCDP or HCDP table"
|
|
depends on ACPI && EFI && IA64
|
|
default y if IA64
|
|
help
|
|
If your firmware supplies the PCDP table, and you want to
|
|
automatically use the primary console device it describes
|
|
as the Linux console, say Y here.
|
|
|
|
If your firmware supplies the HCDP table, and you want to
|
|
use the first serial port it describes as the Linux console,
|
|
say Y here. If your EFI ConOut path contains only a UART
|
|
device, it will become the console automatically. Otherwise,
|
|
you must specify the "console=hcdp" kernel boot argument.
|
|
|
|
Neither the PCDP nor the HCDP affects naming of serial devices,
|
|
so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
|
|
on how the driver discovers devices.
|
|
|
|
You must also enable the appropriate drivers (serial, VGA, etc.)
|
|
|
|
See DIG64_HCDPv20_042804.pdf available from
|
|
<http://www.dig64.org/specifications/>
|
|
|
|
config DELL_RBU
|
|
tristate "BIOS update support for DELL systems via sysfs"
|
|
depends on X86
|
|
select FW_LOADER
|
|
select FW_LOADER_USER_HELPER
|
|
help
|
|
Say m if you want to have the option of updating the BIOS for your
|
|
DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
|
|
supporting application to communicate with the BIOS regarding the new
|
|
image for the image update to take effect.
|
|
See <file:Documentation/dell_rbu.txt> for more details on the driver.
|
|
|
|
config DCDBAS
|
|
tristate "Dell Systems Management Base Driver"
|
|
depends on X86
|
|
help
|
|
The Dell Systems Management Base Driver provides a sysfs interface
|
|
for systems management software to perform System Management
|
|
Interrupts (SMIs) and Host Control Actions (system power cycle or
|
|
power off after OS shutdown) on certain Dell systems.
|
|
|
|
See <file:Documentation/dcdbas.txt> for more details on the driver
|
|
and the Dell systems on which Dell systems management software makes
|
|
use of this driver.
|
|
|
|
Say Y or M here to enable the driver for use by Dell systems
|
|
management software such as Dell OpenManage.
|
|
|
|
config DMIID
|
|
bool "Export DMI identification via sysfs to userspace"
|
|
depends on DMI
|
|
default y
|
|
help
|
|
Say Y here if you want to query SMBIOS/DMI system identification
|
|
information from userspace through /sys/class/dmi/id/ or if you want
|
|
DMI-based module auto-loading.
|
|
|
|
config DMI_SYSFS
|
|
tristate "DMI table support in sysfs"
|
|
depends on SYSFS && DMI
|
|
default n
|
|
help
|
|
Say Y or M here to enable the exporting of the raw DMI table
|
|
data via sysfs. This is useful for consuming the data without
|
|
requiring any access to /dev/mem at all. Tables are found
|
|
under /sys/firmware/dmi when this option is enabled and
|
|
loaded.
|
|
|
|
config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
|
|
bool
|
|
|
|
config ISCSI_IBFT_FIND
|
|
bool "iSCSI Boot Firmware Table Attributes"
|
|
depends on X86 && ACPI
|
|
default n
|
|
help
|
|
This option enables the kernel to find the region of memory
|
|
in which the ISCSI Boot Firmware Table (iBFT) resides. This
|
|
is necessary for iSCSI Boot Firmware Table Attributes module to work
|
|
properly.
|
|
|
|
config ISCSI_IBFT
|
|
tristate "iSCSI Boot Firmware Table Attributes module"
|
|
select ISCSI_BOOT_SYSFS
|
|
depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL
|
|
default n
|
|
help
|
|
This option enables support for detection and exposing of iSCSI
|
|
Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
|
|
detect iSCSI boot parameters dynamically during system boot, say Y.
|
|
Otherwise, say N.
|
|
|
|
config RASPBERRYPI_FIRMWARE
|
|
tristate "Raspberry Pi Firmware Driver"
|
|
depends on BCM2835_MBOX
|
|
help
|
|
This option enables support for communicating with the firmware on the
|
|
Raspberry Pi.
|
|
|
|
config FW_CFG_SYSFS
|
|
tristate "QEMU fw_cfg device support in sysfs"
|
|
depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86)
|
|
depends on HAS_IOPORT_MAP
|
|
default n
|
|
help
|
|
Say Y or M here to enable the exporting of the QEMU firmware
|
|
configuration (fw_cfg) file entries via sysfs. Entries are
|
|
found under /sys/firmware/fw_cfg when this option is enabled
|
|
and loaded.
|
|
|
|
config FW_CFG_SYSFS_CMDLINE
|
|
bool "QEMU fw_cfg device parameter parsing"
|
|
depends on FW_CFG_SYSFS
|
|
help
|
|
Allow the qemu_fw_cfg device to be initialized via the kernel
|
|
command line or using a module parameter.
|
|
WARNING: Using incorrect parameters (base address in particular)
|
|
may crash your system.
|
|
|
|
config QCOM_SCM
|
|
bool
|
|
depends on ARM || ARM64
|
|
select RESET_CONTROLLER
|
|
|
|
config QCOM_SCM_32
|
|
def_bool y
|
|
depends on QCOM_SCM && ARM
|
|
|
|
config QCOM_SCM_64
|
|
def_bool y
|
|
depends on QCOM_SCM && ARM64
|
|
|
|
config TI_SCI_PROTOCOL
|
|
tristate "TI System Control Interface (TISCI) Message Protocol"
|
|
depends on TI_MESSAGE_MANAGER
|
|
help
|
|
TI System Control Interface (TISCI) Message Protocol is used to manage
|
|
compute systems such as ARM, DSP etc with the system controller in
|
|
complex System on Chip(SoC) such as those found on certain keystone
|
|
generation SoC from TI.
|
|
|
|
System controller provides various facilities including power
|
|
management function support.
|
|
|
|
This protocol library is used by client drivers to use the features
|
|
provided by the system controller.
|
|
|
|
config HAVE_ARM_SMCCC
|
|
bool
|
|
|
|
source "drivers/firmware/broadcom/Kconfig"
|
|
source "drivers/firmware/google/Kconfig"
|
|
source "drivers/firmware/efi/Kconfig"
|
|
source "drivers/firmware/meson/Kconfig"
|
|
source "drivers/firmware/tegra/Kconfig"
|
|
|
|
endmenu
|