mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 08:31:55 +00:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
193 lines
4.2 KiB
C
193 lines
4.2 KiB
C
/*
|
|
* drivers/net/phy/davicom.c
|
|
*
|
|
* Driver for Davicom PHYs
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#define MII_DM9161_SCR 0x10
|
|
#define MII_DM9161_SCR_INIT 0x0610
|
|
|
|
/* DM9161 Interrupt Register */
|
|
#define MII_DM9161_INTR 0x15
|
|
#define MII_DM9161_INTR_PEND 0x8000
|
|
#define MII_DM9161_INTR_DPLX_MASK 0x0800
|
|
#define MII_DM9161_INTR_SPD_MASK 0x0400
|
|
#define MII_DM9161_INTR_LINK_MASK 0x0200
|
|
#define MII_DM9161_INTR_MASK 0x0100
|
|
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
|
|
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
|
|
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
|
|
#define MII_DM9161_INTR_INIT 0x0000
|
|
#define MII_DM9161_INTR_STOP \
|
|
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
|
|
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
|
|
|
|
/* DM9161 10BT Configuration/Status */
|
|
#define MII_DM9161_10BTCSR 0x12
|
|
#define MII_DM9161_10BTCSR_INIT 0x7800
|
|
|
|
MODULE_DESCRIPTION("Davicom PHY driver");
|
|
MODULE_AUTHOR("Andy Fleming");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
#define DM9161_DELAY 1
|
|
static int dm9161_config_intr(struct phy_device *phydev)
|
|
{
|
|
int temp;
|
|
|
|
temp = phy_read(phydev, MII_DM9161_INTR);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
if(PHY_INTERRUPT_ENABLED == phydev->interrupts )
|
|
temp &= ~(MII_DM9161_INTR_STOP);
|
|
else
|
|
temp |= MII_DM9161_INTR_STOP;
|
|
|
|
temp = phy_write(phydev, MII_DM9161_INTR, temp);
|
|
|
|
return temp;
|
|
}
|
|
|
|
static int dm9161_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
/* Isolate the PHY */
|
|
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Configure the new settings */
|
|
err = genphy_config_aneg(phydev);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm9161_config_init(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
/* Isolate the PHY */
|
|
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Do not bypass the scrambler/descrambler */
|
|
err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Clear 10BTCSR to default */
|
|
err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Reconnect the PHY, and enable Autonegotiation */
|
|
err = phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm9161_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err = phy_read(phydev, MII_DM9161_INTR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static struct phy_driver dm9161_driver = {
|
|
.phy_id = 0x0181b880,
|
|
.name = "Davicom DM9161E",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.config_init = dm9161_config_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static struct phy_driver dm9131_driver = {
|
|
.phy_id = 0x00181b80,
|
|
.name = "Davicom DM9131",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static int __init davicom_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_driver_register(&dm9161_driver);
|
|
if (ret)
|
|
goto err1;
|
|
|
|
ret = phy_driver_register(&dm9131_driver);
|
|
if (ret)
|
|
goto err2;
|
|
return 0;
|
|
|
|
err2:
|
|
phy_driver_unregister(&dm9161_driver);
|
|
err1:
|
|
return ret;
|
|
}
|
|
|
|
static void __exit davicom_exit(void)
|
|
{
|
|
phy_driver_unregister(&dm9161_driver);
|
|
phy_driver_unregister(&dm9131_driver);
|
|
}
|
|
|
|
module_init(davicom_init);
|
|
module_exit(davicom_exit);
|