mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 01:51:53 +00:00
12b3e038e5
As the comment explains, the intention of the code is to clear the OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be kept. OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER, OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off being cleared. Signed-off-by: Daniel Glöckner <dg@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
493 lines
13 KiB
C
493 lines
13 KiB
C
/*
|
|
* TI OMAP1 Real Time Clock interface for Linux
|
|
*
|
|
* Copyright (C) 2003 MontaVista Software, Inc.
|
|
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
|
|
*
|
|
* Copyright (C) 2006 David Brownell (new RTC framework)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
|
|
* with century-range alarm matching, driven by the 32kHz clock.
|
|
*
|
|
* The main user-visible ways it differs from PC RTCs are by omitting
|
|
* "don't care" alarm fields and sub-second periodic IRQs, and having
|
|
* an autoadjust mechanism to calibrate to the true oscillator rate.
|
|
*
|
|
* Board-specific wiring options include using split power mode with
|
|
* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
|
|
* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
|
|
* low power modes) for OMAP1 boards (OMAP-L138 has this built into
|
|
* the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
|
|
*/
|
|
|
|
#define OMAP_RTC_BASE 0xfffb4800
|
|
|
|
/* RTC registers */
|
|
#define OMAP_RTC_SECONDS_REG 0x00
|
|
#define OMAP_RTC_MINUTES_REG 0x04
|
|
#define OMAP_RTC_HOURS_REG 0x08
|
|
#define OMAP_RTC_DAYS_REG 0x0C
|
|
#define OMAP_RTC_MONTHS_REG 0x10
|
|
#define OMAP_RTC_YEARS_REG 0x14
|
|
#define OMAP_RTC_WEEKS_REG 0x18
|
|
|
|
#define OMAP_RTC_ALARM_SECONDS_REG 0x20
|
|
#define OMAP_RTC_ALARM_MINUTES_REG 0x24
|
|
#define OMAP_RTC_ALARM_HOURS_REG 0x28
|
|
#define OMAP_RTC_ALARM_DAYS_REG 0x2c
|
|
#define OMAP_RTC_ALARM_MONTHS_REG 0x30
|
|
#define OMAP_RTC_ALARM_YEARS_REG 0x34
|
|
|
|
#define OMAP_RTC_CTRL_REG 0x40
|
|
#define OMAP_RTC_STATUS_REG 0x44
|
|
#define OMAP_RTC_INTERRUPTS_REG 0x48
|
|
|
|
#define OMAP_RTC_COMP_LSB_REG 0x4c
|
|
#define OMAP_RTC_COMP_MSB_REG 0x50
|
|
#define OMAP_RTC_OSC_REG 0x54
|
|
|
|
/* OMAP_RTC_CTRL_REG bit fields: */
|
|
#define OMAP_RTC_CTRL_SPLIT (1<<7)
|
|
#define OMAP_RTC_CTRL_DISABLE (1<<6)
|
|
#define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5)
|
|
#define OMAP_RTC_CTRL_TEST (1<<4)
|
|
#define OMAP_RTC_CTRL_MODE_12_24 (1<<3)
|
|
#define OMAP_RTC_CTRL_AUTO_COMP (1<<2)
|
|
#define OMAP_RTC_CTRL_ROUND_30S (1<<1)
|
|
#define OMAP_RTC_CTRL_STOP (1<<0)
|
|
|
|
/* OMAP_RTC_STATUS_REG bit fields: */
|
|
#define OMAP_RTC_STATUS_POWER_UP (1<<7)
|
|
#define OMAP_RTC_STATUS_ALARM (1<<6)
|
|
#define OMAP_RTC_STATUS_1D_EVENT (1<<5)
|
|
#define OMAP_RTC_STATUS_1H_EVENT (1<<4)
|
|
#define OMAP_RTC_STATUS_1M_EVENT (1<<3)
|
|
#define OMAP_RTC_STATUS_1S_EVENT (1<<2)
|
|
#define OMAP_RTC_STATUS_RUN (1<<1)
|
|
#define OMAP_RTC_STATUS_BUSY (1<<0)
|
|
|
|
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
|
|
#define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
|
|
#define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)
|
|
|
|
static void __iomem *rtc_base;
|
|
|
|
#define rtc_read(addr) __raw_readb(rtc_base + (addr))
|
|
#define rtc_write(val, addr) __raw_writeb(val, rtc_base + (addr))
|
|
|
|
|
|
/* we rely on the rtc framework to handle locking (rtc->ops_lock),
|
|
* so the only other requirement is that register accesses which
|
|
* require BUSY to be clear are made with IRQs locally disabled
|
|
*/
|
|
static void rtc_wait_not_busy(void)
|
|
{
|
|
int count = 0;
|
|
u8 status;
|
|
|
|
/* BUSY may stay active for 1/32768 second (~30 usec) */
|
|
for (count = 0; count < 50; count++) {
|
|
status = rtc_read(OMAP_RTC_STATUS_REG);
|
|
if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
/* now we have ~15 usec to read/write various registers */
|
|
}
|
|
|
|
static irqreturn_t rtc_irq(int irq, void *rtc)
|
|
{
|
|
unsigned long events = 0;
|
|
u8 irq_data;
|
|
|
|
irq_data = rtc_read(OMAP_RTC_STATUS_REG);
|
|
|
|
/* alarm irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_ALARM) {
|
|
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
|
|
events |= RTC_IRQF | RTC_AF;
|
|
}
|
|
|
|
/* 1/sec periodic/update irq? */
|
|
if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
|
|
events |= RTC_IRQF | RTC_UF;
|
|
|
|
rtc_update_irq(rtc, 1, events);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
u8 reg;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
if (enabled)
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
else
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
rtc_wait_not_busy();
|
|
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* this hardware doesn't support "don't care" alarm fields */
|
|
static int tm2bcd(struct rtc_time *tm)
|
|
{
|
|
if (rtc_valid_tm(tm) != 0)
|
|
return -EINVAL;
|
|
|
|
tm->tm_sec = bin2bcd(tm->tm_sec);
|
|
tm->tm_min = bin2bcd(tm->tm_min);
|
|
tm->tm_hour = bin2bcd(tm->tm_hour);
|
|
tm->tm_mday = bin2bcd(tm->tm_mday);
|
|
|
|
tm->tm_mon = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* epoch == 1900 */
|
|
if (tm->tm_year < 100 || tm->tm_year > 199)
|
|
return -EINVAL;
|
|
tm->tm_year = bin2bcd(tm->tm_year - 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcd2tm(struct rtc_time *tm)
|
|
{
|
|
tm->tm_sec = bcd2bin(tm->tm_sec);
|
|
tm->tm_min = bcd2bin(tm->tm_min);
|
|
tm->tm_hour = bcd2bin(tm->tm_hour);
|
|
tm->tm_mday = bcd2bin(tm->tm_mday);
|
|
tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
|
|
/* epoch == 1900 */
|
|
tm->tm_year = bcd2bin(tm->tm_year) + 100;
|
|
}
|
|
|
|
|
|
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
/* we don't report wday/yday/isdst ... */
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
|
|
tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
|
|
tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
|
|
tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
|
|
tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
|
|
tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
bcd2tm(tm);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
if (tm2bcd(tm) < 0)
|
|
return -EINVAL;
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
|
|
rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
|
|
rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
|
|
rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
|
|
rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
|
|
rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
|
|
alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
|
|
alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
|
|
alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
|
|
alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
|
|
alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
bcd2tm(&alm->time);
|
|
alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
|
|
& OMAP_RTC_INTERRUPTS_IT_ALARM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
|
|
{
|
|
u8 reg;
|
|
|
|
if (tm2bcd(&alm->time) < 0)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
rtc_wait_not_busy();
|
|
|
|
rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
|
|
rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
|
|
rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
|
|
rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
|
|
rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
|
|
rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
|
|
|
|
reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
if (alm->enabled)
|
|
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
else
|
|
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
|
|
rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct rtc_class_ops omap_rtc_ops = {
|
|
.read_time = omap_rtc_read_time,
|
|
.set_time = omap_rtc_set_time,
|
|
.read_alarm = omap_rtc_read_alarm,
|
|
.set_alarm = omap_rtc_set_alarm,
|
|
.alarm_irq_enable = omap_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static int omap_rtc_alarm;
|
|
static int omap_rtc_timer;
|
|
|
|
static int __init omap_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res, *mem;
|
|
struct rtc_device *rtc;
|
|
u8 reg, new_ctrl;
|
|
|
|
omap_rtc_timer = platform_get_irq(pdev, 0);
|
|
if (omap_rtc_timer <= 0) {
|
|
pr_debug("%s: no update irq?\n", pdev->name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
omap_rtc_alarm = platform_get_irq(pdev, 1);
|
|
if (omap_rtc_alarm <= 0) {
|
|
pr_debug("%s: no alarm irq?\n", pdev->name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
pr_debug("%s: RTC resource data missing\n", pdev->name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
mem = request_mem_region(res->start, resource_size(res), pdev->name);
|
|
if (!mem) {
|
|
pr_debug("%s: RTC registers at %08x are not free\n",
|
|
pdev->name, res->start);
|
|
return -EBUSY;
|
|
}
|
|
|
|
rtc_base = ioremap(res->start, resource_size(res));
|
|
if (!rtc_base) {
|
|
pr_debug("%s: RTC registers can't be mapped\n", pdev->name);
|
|
goto fail;
|
|
}
|
|
|
|
rtc = rtc_device_register(pdev->name, &pdev->dev,
|
|
&omap_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc)) {
|
|
pr_debug("%s: can't register RTC device, err %ld\n",
|
|
pdev->name, PTR_ERR(rtc));
|
|
goto fail0;
|
|
}
|
|
platform_set_drvdata(pdev, rtc);
|
|
dev_set_drvdata(&rtc->dev, mem);
|
|
|
|
/* clear pending irqs, and set 1/second periodic,
|
|
* which we'll use instead of update irqs
|
|
*/
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/* clear old status */
|
|
reg = rtc_read(OMAP_RTC_STATUS_REG);
|
|
if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
|
|
pr_info("%s: RTC power up reset detected\n",
|
|
pdev->name);
|
|
rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
|
|
}
|
|
if (reg & (u8) OMAP_RTC_STATUS_ALARM)
|
|
rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
|
|
|
|
/* handle periodic and alarm irqs */
|
|
if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED,
|
|
dev_name(&rtc->dev), rtc)) {
|
|
pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
|
|
pdev->name, omap_rtc_timer);
|
|
goto fail1;
|
|
}
|
|
if ((omap_rtc_timer != omap_rtc_alarm) &&
|
|
(request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
|
|
dev_name(&rtc->dev), rtc))) {
|
|
pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
|
|
pdev->name, omap_rtc_alarm);
|
|
goto fail2;
|
|
}
|
|
|
|
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
|
|
reg = rtc_read(OMAP_RTC_CTRL_REG);
|
|
if (reg & (u8) OMAP_RTC_CTRL_STOP)
|
|
pr_info("%s: already running\n", pdev->name);
|
|
|
|
/* force to 24 hour mode */
|
|
new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
|
|
new_ctrl |= OMAP_RTC_CTRL_STOP;
|
|
|
|
/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
|
|
*
|
|
* - Device wake-up capability setting should come through chip
|
|
* init logic. OMAP1 boards should initialize the "wakeup capable"
|
|
* flag in the platform device if the board is wired right for
|
|
* being woken up by RTC alarm. For OMAP-L138, this capability
|
|
* is built into the SoC by the "Deep Sleep" capability.
|
|
*
|
|
* - Boards wired so RTC_ON_nOFF is used as the reset signal,
|
|
* rather than nPWRON_RESET, should forcibly enable split
|
|
* power mode. (Some chip errata report that RTC_CTRL_SPLIT
|
|
* is write-only, and always reads as zero...)
|
|
*/
|
|
|
|
if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
|
|
pr_info("%s: split power mode\n", pdev->name);
|
|
|
|
if (reg != new_ctrl)
|
|
rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);
|
|
|
|
return 0;
|
|
|
|
fail2:
|
|
free_irq(omap_rtc_timer, rtc);
|
|
fail1:
|
|
rtc_device_unregister(rtc);
|
|
fail0:
|
|
iounmap(rtc_base);
|
|
fail:
|
|
release_mem_region(mem->start, resource_size(mem));
|
|
return -EIO;
|
|
}
|
|
|
|
static int __exit omap_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct rtc_device *rtc = platform_get_drvdata(pdev);
|
|
struct resource *mem = dev_get_drvdata(&rtc->dev);
|
|
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
|
|
/* leave rtc running, but disable irqs */
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
free_irq(omap_rtc_timer, rtc);
|
|
|
|
if (omap_rtc_timer != omap_rtc_alarm)
|
|
free_irq(omap_rtc_alarm, rtc);
|
|
|
|
rtc_device_unregister(rtc);
|
|
iounmap(rtc_base);
|
|
release_mem_region(mem->start, resource_size(mem));
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static u8 irqstat;
|
|
|
|
static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
/* FIXME the RTC alarm is not currently acting as a wakeup event
|
|
* source, and in fact this enable() call is just saving a flag
|
|
* that's never used...
|
|
*/
|
|
if (device_may_wakeup(&pdev->dev))
|
|
enable_irq_wake(omap_rtc_alarm);
|
|
else
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_rtc_resume(struct platform_device *pdev)
|
|
{
|
|
if (device_may_wakeup(&pdev->dev))
|
|
disable_irq_wake(omap_rtc_alarm);
|
|
else
|
|
rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define omap_rtc_suspend NULL
|
|
#define omap_rtc_resume NULL
|
|
#endif
|
|
|
|
static void omap_rtc_shutdown(struct platform_device *pdev)
|
|
{
|
|
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
|
|
}
|
|
|
|
MODULE_ALIAS("platform:omap_rtc");
|
|
static struct platform_driver omap_rtc_driver = {
|
|
.remove = __exit_p(omap_rtc_remove),
|
|
.suspend = omap_rtc_suspend,
|
|
.resume = omap_rtc_resume,
|
|
.shutdown = omap_rtc_shutdown,
|
|
.driver = {
|
|
.name = "omap_rtc",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init rtc_init(void)
|
|
{
|
|
return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
|
|
}
|
|
module_init(rtc_init);
|
|
|
|
static void __exit rtc_exit(void)
|
|
{
|
|
platform_driver_unregister(&omap_rtc_driver);
|
|
}
|
|
module_exit(rtc_exit);
|
|
|
|
MODULE_AUTHOR("George G. Davis (and others)");
|
|
MODULE_LICENSE("GPL");
|