linux/drivers/acpi/asus_acpi.c
Richard Purdie 599a52d126 backlight: Separate backlight properties from backlight ops pointers
Per device data such as brightness belongs to the indivdual device
and should therefore be separate from the the backlight operation
function pointers. This patch splits the two types of data and
allows simplifcation of some code.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20 09:26:53 +00:00

1418 lines
38 KiB
C
Raw Blame History

/*
* asus_acpi.c - Asus Laptop ACPI Extras
*
*
* Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* The development page for this driver is located at
* http://sourceforge.net/projects/acpi4asus/
*
* Credits:
* Pontus Fuchs - Helper functions, cleanup
* Johann Wiesner - Small compile fixes
* John Belmonte - ACPI code for Toshiba laptop was a good starting point.
* <20>ic Burghard - LED display support for W1N
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
#define ASUS_ACPI_VERSION "0.30"
#define PROC_ASUS "asus" //the directory
#define PROC_MLED "mled"
#define PROC_WLED "wled"
#define PROC_TLED "tled"
#define PROC_BT "bluetooth"
#define PROC_LEDD "ledd"
#define PROC_INFO "info"
#define PROC_LCD "lcd"
#define PROC_BRN "brn"
#define PROC_DISP "disp"
#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver"
#define ACPI_HOTK_CLASS "hotkey"
#define ACPI_HOTK_DEVICE_NAME "Hotkey"
#define ACPI_HOTK_HID "ATK0100"
/*
* Some events we use, same for all Asus
*/
#define BR_UP 0x10
#define BR_DOWN 0x20
/*
* Flags for hotk status
*/
#define MLED_ON 0x01 //mail LED
#define WLED_ON 0x02 //wireless LED
#define TLED_ON 0x04 //touchpad LED
#define BT_ON 0x08 //internal Bluetooth
MODULE_AUTHOR("Julien Lerouge, Karol Kozimor");
MODULE_DESCRIPTION(ACPI_HOTK_NAME);
MODULE_LICENSE("GPL");
static uid_t asus_uid;
static gid_t asus_gid;
module_param(asus_uid, uint, 0);
MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
module_param(asus_gid, uint, 0);
MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
/* For each model, all features implemented,
* those marked with R are relative to HOTK, A for absolute */
struct model_data {
char *name; //name of the laptop________________A
char *mt_mled; //method to handle mled_____________R
char *mled_status; //node to handle mled reading_______A
char *mt_wled; //method to handle wled_____________R
char *wled_status; //node to handle wled reading_______A
char *mt_tled; //method to handle tled_____________R
char *tled_status; //node to handle tled reading_______A
char *mt_ledd; //method to handle LED display______R
char *mt_bt_switch; //method to switch Bluetooth on/off_R
char *bt_status; //no model currently supports this__?
char *mt_lcd_switch; //method to turn LCD on/off_________A
char *lcd_status; //node to read LCD panel state______A
char *brightness_up; //method to set brightness up_______A
char *brightness_down; //guess what ?______________________A
char *brightness_set; //method to set absolute brightness_R
char *brightness_get; //method to get absolute brightness_R
char *brightness_status; //node to get brightness____________A
char *display_set; //method to set video output________R
char *display_get; //method to get video output________R
};
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
*/
struct asus_hotk {
struct acpi_device *device; //the device we are in
acpi_handle handle; //the handle of the hotk device
char status; //status of the hotk, for LEDs, ...
u32 ledd_status; //status of the LED display
struct model_data *methods; //methods available on the laptop
u8 brightness; //brightness level
enum {
A1x = 0, //A1340D, A1300F
A2x, //A2500H
A4G, //A4700G
D1x, //D1
L2D, //L2000D
L3C, //L3800C
L3D, //L3400D
L3H, //L3H, L2000E, L5D
L4R, //L4500R
L5x, //L5800C
L8L, //L8400L
M1A, //M1300A
M2E, //M2400E, L4400L
M6N, //M6800N, W3400N
M6R, //M6700R, A3000G
P30, //Samsung P30
S1x, //S1300A, but also L1400B and M2400A (L84F)
S2x, //S200 (J1 reported), Victor MP-XP7210
W1N, //W1000N
W5A, //W5A
W3V, //W3030V
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
A4S, //Z81sp
//(Centrino)
END_MODEL
} model; //Models currently supported
u16 event_count[128]; //count for each event TODO make this better
};
/* Here we go */
#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0."
#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0."
#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0."
#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0."
#define S1x_PREFIX "\\_SB.PCI0.PX40."
#define S2x_PREFIX A1x_PREFIX
#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0."
static struct model_data model_conf[END_MODEL] = {
/*
* TODO I have seen a SWBX and AIBX method on some models, like L1400B,
* it seems to be a kind of switch, but what for ?
*/
{
.name = "A1x",
.mt_mled = "MLED",
.mled_status = "\\MAIL",
.mt_lcd_switch = A1x_PREFIX "_Q10",
.lcd_status = "\\BKLI",
.brightness_up = A1x_PREFIX "_Q0E",
.brightness_down = A1x_PREFIX "_Q0F"},
{
.name = "A2x",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\SG66",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\BAOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "A4G",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_lcd_switch = xxN_PREFIX "_Q10",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "D1x",
.mt_mled = "MLED",
.mt_lcd_switch = "\\Q0D",
.lcd_status = "\\GP11",
.brightness_up = "\\Q0C",
.brightness_down = "\\Q0B",
.brightness_status = "\\BLVL",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L2D",
.mt_mled = "MLED",
.mled_status = "\\SGP6",
.mt_wled = "WLED",
.wled_status = "\\RCP3",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\SGP0",
.brightness_up = "\\Q0E",
.brightness_down = "\\Q0F",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L3C",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = L3C_PREFIX "_Q10",
.lcd_status = "\\GL32",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"},
{
.name = "L3D",
.mt_mled = "MLED",
.mled_status = "\\MALD",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\BKLG",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L3H",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "EHK",
.lcd_status = "\\_SB.PCI0.PM.PBC",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L4R",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\_SB.PCI0.SBRG.SG13",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.PCI0.SBSM.SEO4",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "L5x",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_tled = "TLED",
.mt_lcd_switch = "\\Q0D",
.lcd_status = "\\BAOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L8L"
/* No features, but at least support the hotkeys */
},
{
.name = "M1A",
.mt_mled = "MLED",
.mt_lcd_switch = M1A_PREFIX "Q10",
.lcd_status = "\\PNOF",
.brightness_up = M1A_PREFIX "Q0E",
.brightness_down = M1A_PREFIX "Q0F",
.brightness_status = "\\BRIT",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "M2E",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\GP06",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "M6N",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\_SB.PCI0.SBRG.SG13",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\SSTE"},
{
.name = "M6R",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.PCI0.SBSM.SEO4",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "P30",
.mt_wled = "WLED",
.mt_lcd_switch = P30_PREFIX "_Q0E",
.lcd_status = "\\BKLT",
.brightness_up = P30_PREFIX "_Q68",
.brightness_down = P30_PREFIX "_Q69",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\DNXT"},
{
.name = "S1x",
.mt_mled = "MLED",
.mled_status = "\\EMLE",
.mt_wled = "WLED",
.mt_lcd_switch = S1x_PREFIX "Q10",
.lcd_status = "\\PNOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV"},
{
.name = "S2x",
.mt_mled = "MLED",
.mled_status = "\\MAIL",
.mt_lcd_switch = S2x_PREFIX "_Q10",
.lcd_status = "\\BKLI",
.brightness_up = S2x_PREFIX "_Q0B",
.brightness_down = S2x_PREFIX "_Q0A"},
{
.name = "W1N",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_ledd = "SLCM",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "W5A",
.mt_bt_switch = "BLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "W3V",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "A4S",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.mt_bt_switch = "BLED",
.mt_wled = "WLED"
}
};
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
static struct backlight_device *asus_backlight_device;
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
* available before the hotk
*/
static struct acpi_table_header *asus_info;
/* The actual device the driver binds to */
static struct asus_hotk *hotk;
/*
* The hotkey driver declaration
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static struct acpi_driver asus_hotk_driver = {
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = ACPI_HOTK_HID,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
},
};
/*
* This function evaluates an ACPI method, given an int as parameter, the
* method is searched within the scope of the handle, can be NULL. The output
* of the method is written is output, which can also be NULL
*
* returns 1 if write is successful, 0 else.
*/
static int write_acpi_int(acpi_handle handle, const char *method, int val,
struct acpi_buffer *output)
{
struct acpi_object_list params; //list of input parameters (an int here)
union acpi_object in_obj; //the only param we use
acpi_status status;
params.count = 1;
params.pointer = &in_obj;
in_obj.type = ACPI_TYPE_INTEGER;
in_obj.integer.value = val;
status = acpi_evaluate_object(handle, (char *)method, &params, output);
return (status == AE_OK);
}
static int read_acpi_int(acpi_handle handle, const char *method, int *val)
{
struct acpi_buffer output;
union acpi_object out_obj;
acpi_status status;
output.length = sizeof(out_obj);
output.pointer = &out_obj;
status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
*val = out_obj.integer.value;
return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
}
/*
* We write our info in page, we begin at offset off and cannot write more
* than count bytes. We set eof to 1 if we handle those 2 values. We return the
* number of bytes written in page
*/
static int
proc_read_info(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
int len = 0;
int temp;
char buf[16]; //enough for all info
/*
* We use the easy way, we don't care of off and count, so we don't set eof
* to 1
*/
len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
len += sprintf(page + len, "Model reference : %s\n",
hotk->methods->name);
/*
* The SFUN method probably allows the original driver to get the list
* of features supported by a given model. For now, 0x0100 or 0x0800
* bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
* The significance of others is yet to be found.
*/
if (read_acpi_int(hotk->handle, "SFUN", &temp))
len +=
sprintf(page + len, "SFUN value : 0x%04x\n", temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* battery low and 0x04 for battery critical, its readings tend to be
* more accurate than those provided by _BST.
* Note: since not all the laptops provide this method, errors are
* silently ignored.
*/
if (read_acpi_int(hotk->handle, "ASYM", &temp))
len +=
sprintf(page + len, "ASYM value : 0x%04x\n", temp);
if (asus_info) {
snprintf(buf, 16, "%d", asus_info->length);
len += sprintf(page + len, "DSDT length : %s\n", buf);
snprintf(buf, 16, "%d", asus_info->checksum);
len += sprintf(page + len, "DSDT checksum : %s\n", buf);
snprintf(buf, 16, "%d", asus_info->revision);
len += sprintf(page + len, "DSDT revision : %s\n", buf);
snprintf(buf, 7, "%s", asus_info->oem_id);
len += sprintf(page + len, "OEM id : %s\n", buf);
snprintf(buf, 9, "%s", asus_info->oem_table_id);
len += sprintf(page + len, "OEM table id : %s\n", buf);
snprintf(buf, 16, "%x", asus_info->oem_revision);
len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
}
return len;
}
/*
* /proc handlers
* We write our info in page, we begin at offset off and cannot write more
* than count bytes. We set eof to 1 if we handle those 2 values. We return the
* number of bytes written in page
*/
/* Generic LED functions */
static int read_led(const char *ledname, int ledmask)
{
if (ledname) {
int led_status;
if (read_acpi_int(NULL, ledname, &led_status))
return led_status;
else
printk(KERN_WARNING "Asus ACPI: Error reading LED "
"status\n");
}
return (hotk->status & ledmask) ? 1 : 0;
}
static int parse_arg(const char __user * buf, unsigned long count, int *val)
{
char s[32];
if (!count)
return 0;
if (count > 31)
return -EINVAL;
if (copy_from_user(s, buf, count))
return -EFAULT;
s[count] = 0;
if (sscanf(s, "%i", val) != 1)
return -EINVAL;
return count;
}
/* FIXME: kill extraneous args so it can be called independently */
static int
write_led(const char __user * buffer, unsigned long count,
char *ledname, int ledmask, int invert)
{
int rv, value;
int led_out = 0;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
led_out = value ? 1 : 0;
hotk->status =
(led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
if (invert) /* invert target value */
led_out = !led_out & 0x1;
if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
ledname);
return rv;
}
/*
* Proc handlers for MLED
*/
static int
proc_read_mled(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n",
read_led(hotk->methods->mled_status, MLED_ON));
}
static int
proc_write_mled(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
}
/*
* Proc handlers for LED display
*/
static int
proc_read_ledd(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "0x%08x\n", hotk->ledd_status);
}
static int
proc_write_ledd(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0) {
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_ledd, value, NULL))
printk(KERN_WARNING
"Asus ACPI: LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
return rv;
}
/*
* Proc handlers for WLED
*/
static int
proc_read_wled(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n",
read_led(hotk->methods->wled_status, WLED_ON));
}
static int
proc_write_wled(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
}
/*
* Proc handlers for Bluetooth
*/
static int
proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
}
static int
proc_write_bluetooth(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
/* Note: mt_bt_switch controls both internal Bluetooth adapter's
presence and its LED */
return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
}
/*
* Proc handlers for TLED
*/
static int
proc_read_tled(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n",
read_led(hotk->methods->tled_status, TLED_ON));
}
static int
proc_write_tled(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
}
static int get_lcd_state(void)
{
int lcd = 0;
if (hotk->model != L3H) {
/* We don't have to check anything if we are here */
if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
printk(KERN_WARNING
"Asus ACPI: Error reading LCD status\n");
if (hotk->model == L2D)
lcd = ~lcd;
} else { /* L3H and the like have to be handled differently */
acpi_status status = 0;
struct acpi_object_list input;
union acpi_object mt_params[2];
struct acpi_buffer output;
union acpi_object out_obj;
input.count = 2;
input.pointer = mt_params;
/* Note: the following values are partly guessed up, but
otherwise they seem to work */
mt_params[0].type = ACPI_TYPE_INTEGER;
mt_params[0].integer.value = 0x02;
mt_params[1].type = ACPI_TYPE_INTEGER;
mt_params[1].integer.value = 0x02;
output.length = sizeof(out_obj);
output.pointer = &out_obj;
status =
acpi_evaluate_object(NULL, hotk->methods->lcd_status,
&input, &output);
if (status != AE_OK)
return -1;
if (out_obj.type == ACPI_TYPE_INTEGER)
/* That's what the AML code does */
lcd = out_obj.integer.value >> 8;
}
return (lcd & 1);
}
static int set_lcd_state(int value)
{
int lcd = 0;
acpi_status status = 0;
lcd = value ? 1 : 0;
if (lcd != get_lcd_state()) {
/* switch */
if (hotk->model != L3H) {
status =
acpi_evaluate_object(NULL,
hotk->methods->mt_lcd_switch,
NULL, NULL);
} else { /* L3H and the like have to be handled differently */
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
NULL))
status = AE_ERROR;
/* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
the exact behaviour is simulated here */
}
if (ACPI_FAILURE(status))
printk(KERN_WARNING "Asus ACPI: Error switching LCD\n");
}
return 0;
}
static int
proc_read_lcd(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n", get_lcd_state());
}
static int
proc_write_lcd(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
set_lcd_state(value);
return rv;
}
static int read_brightness(struct backlight_device *bd)
{
int value;
if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */
if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
&value))
printk(KERN_WARNING
"Asus ACPI: Error reading brightness\n");
} else if (hotk->methods->brightness_status) { /* For D1 for example */
if (!read_acpi_int(NULL, hotk->methods->brightness_status,
&value))
printk(KERN_WARNING
"Asus ACPI: Error reading brightness\n");
} else /* No GPLV method */
value = hotk->brightness;
return value;
}
/*
* Change the brightness level
*/
static int set_brightness(int value)
{
acpi_status status = 0;
int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
value, NULL))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
ret = -EIO;
goto out;
}
/* No SPLV method if we are here, act as appropriate */
value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
hotk->methods->brightness_down,
NULL, NULL);
(value > 0) ? value-- : value++;
if (ACPI_FAILURE(status))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
ret = -EIO;
}
out:
return ret;
}
static int set_brightness_status(struct backlight_device *bd)
{
return set_brightness(bd->props.brightness);
}
static int
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
return sprintf(page, "%d\n", read_brightness(NULL));
}
static int
proc_write_brn(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0) {
value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
/* 0 <= value <= 15 */
set_brightness(value);
}
return rv;
}
static void set_display(int value)
{
/* no sanity check needed for now */
if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
value, NULL))
printk(KERN_WARNING "Asus ACPI: Error setting display\n");
return;
}
/*
* Now, *this* one could be more user-friendly, but so far, no-one has
* complained. The significance of bits is the same as in proc_write_disp()
*/
static int
proc_read_disp(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
int value = 0;
if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
printk(KERN_WARNING
"Asus ACPI: Error reading display status\n");
value &= 0x07; /* needed for some models, shouldn't hurt others */
return sprintf(page, "%d\n", value);
}
/*
* Experimental support for display switching. As of now: 1 should activate
* the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
* (bitwise) of these will suffice. I never actually tested 3 displays hooked up
* simultaneously, so be warned. See the acpi4asus README for more info.
*/
static int
proc_write_disp(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
set_display(value);
return rv;
}
typedef int (proc_readfunc) (char *page, char **start, off_t off, int count,
int *eof, void *data);
typedef int (proc_writefunc) (struct file * file, const char __user * buffer,
unsigned long count, void *data);
static int
asus_proc_add(char *name, proc_writefunc * writefunc,
proc_readfunc * readfunc, mode_t mode,
struct acpi_device *device)
{
struct proc_dir_entry *proc =
create_proc_entry(name, mode, acpi_device_dir(device));
if (!proc) {
printk(KERN_WARNING " Unable to create %s fs entry\n", name);
return -1;
}
proc->write_proc = writefunc;
proc->read_proc = readfunc;
proc->data = acpi_driver_data(device);
proc->owner = THIS_MODULE;
proc->uid = asus_uid;
proc->gid = asus_gid;
return 0;
}
static int asus_hotk_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *proc;
mode_t mode;
/*
* If parameter uid or gid is not changed, keep the default setting for
* our proc entries (-rw-rw-rw-) else, it means we care about security,
* and then set to -rw-rw----
*/
if ((asus_uid == 0) && (asus_gid == 0)) {
mode = S_IFREG | S_IRUGO | S_IWUGO;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
printk(KERN_WARNING " asus_uid and asus_gid parameters are "
"deprecated, use chown and chmod instead!\n");
}
acpi_device_dir(device) = asus_proc_dir;
if (!acpi_device_dir(device))
return -ENODEV;
proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device));
if (proc) {
proc->read_proc = proc_read_info;
proc->data = acpi_driver_data(device);
proc->owner = THIS_MODULE;
proc->uid = asus_uid;
proc->gid = asus_gid;
} else {
printk(KERN_WARNING " Unable to create " PROC_INFO
" fs entry\n");
}
if (hotk->methods->mt_wled) {
asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled,
mode, device);
}
if (hotk->methods->mt_ledd) {
asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd,
mode, device);
}
if (hotk->methods->mt_mled) {
asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled,
mode, device);
}
if (hotk->methods->mt_tled) {
asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled,
mode, device);
}
if (hotk->methods->mt_bt_switch) {
asus_proc_add(PROC_BT, &proc_write_bluetooth,
&proc_read_bluetooth, mode, device);
}
/*
* We need both read node and write method as LCD switch is also accessible
* from keyboard
*/
if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode,
device);
}
if ((hotk->methods->brightness_up && hotk->methods->brightness_down) ||
(hotk->methods->brightness_get && hotk->methods->brightness_set)) {
asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode,
device);
}
if (hotk->methods->display_set) {
asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp,
mode, device);
}
return 0;
}
static int asus_hotk_remove_fs(struct acpi_device *device)
{
if (acpi_device_dir(device)) {
remove_proc_entry(PROC_INFO, acpi_device_dir(device));
if (hotk->methods->mt_wled)
remove_proc_entry(PROC_WLED, acpi_device_dir(device));
if (hotk->methods->mt_mled)
remove_proc_entry(PROC_MLED, acpi_device_dir(device));
if (hotk->methods->mt_tled)
remove_proc_entry(PROC_TLED, acpi_device_dir(device));
if (hotk->methods->mt_ledd)
remove_proc_entry(PROC_LEDD, acpi_device_dir(device));
if (hotk->methods->mt_bt_switch)
remove_proc_entry(PROC_BT, acpi_device_dir(device));
if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status)
remove_proc_entry(PROC_LCD, acpi_device_dir(device));
if ((hotk->methods->brightness_up
&& hotk->methods->brightness_down)
|| (hotk->methods->brightness_get
&& hotk->methods->brightness_set))
remove_proc_entry(PROC_BRN, acpi_device_dir(device));
if (hotk->methods->display_set)
remove_proc_entry(PROC_DISP, acpi_device_dir(device));
}
return 0;
}
static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
{
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
if ((event & ~((u32) BR_UP)) < 16) {
hotk->brightness = (event & ~((u32) BR_UP));
} else if ((event & ~((u32) BR_DOWN)) < 16) {
hotk->brightness = (event & ~((u32) BR_DOWN));
}
acpi_bus_generate_event(hotk->device, event,
hotk->event_count[event % 128]++);
return;
}
/*
* Match the model string to the list of supported models. Return END_MODEL if
* no match or model is NULL.
*/
static int asus_model_match(char *model)
{
if (model == NULL)
return END_MODEL;
if (strncmp(model, "L3D", 3) == 0)
return L3D;
else if (strncmp(model, "L2E", 3) == 0 ||
strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0)
return L3H;
else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0)
return L3C;
else if (strncmp(model, "L8L", 3) == 0)
return L8L;
else if (strncmp(model, "L4R", 3) == 0)
return L4R;
else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0)
return M6N;
else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0)
return M6R;
else if (strncmp(model, "M2N", 3) == 0 ||
strncmp(model, "M3N", 3) == 0 ||
strncmp(model, "M5N", 3) == 0 ||
strncmp(model, "M6N", 3) == 0 ||
strncmp(model, "S1N", 3) == 0 ||
strncmp(model, "S5N", 3) == 0 || strncmp(model, "W1N", 3) == 0)
return xxN;
else if (strncmp(model, "M1", 2) == 0)
return M1A;
else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0)
return M2E;
else if (strncmp(model, "L2", 2) == 0)
return L2D;
else if (strncmp(model, "L8", 2) == 0)
return S1x;
else if (strncmp(model, "D1", 2) == 0)
return D1x;
else if (strncmp(model, "A1", 2) == 0)
return A1x;
else if (strncmp(model, "A2", 2) == 0)
return A2x;
else if (strncmp(model, "J1", 2) == 0)
return S2x;
else if (strncmp(model, "L5", 2) == 0)
return L5x;
else if (strncmp(model, "A4G", 3) == 0)
return A4G;
else if (strncmp(model, "W1N", 3) == 0)
return W1N;
else if (strncmp(model, "W3V", 3) == 0)
return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
else if (strncmp(model, "A4S", 3) == 0)
return A4S;
else
return END_MODEL;
}
/*
* This function is used to initialize the hotk with right values. In this
* method, we can make all the detection we want, and modify the hotk struct
*/
static int asus_hotk_get_info(void)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
int bsts_result;
char *string = NULL;
acpi_status status;
/*
* Get DSDT headers early enough to allow for differentiating between
* models, but late enough to allow acpi_bus_register_driver() to fail
* before doing anything ACPI-specific. Should we encounter a machine,
* which needs special handling (i.e. its hotkey device has a different
* HID), this bit will be moved. A global variable asus_info contains
* the DSDT header.
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
printk(KERN_ERR " Hotkey initialization failed\n");
return -ENODEV;
}
/* This needs to be called for some laptops to init properly */
if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
printk(KERN_WARNING " Error calling BSTS\n");
else if (bsts_result)
printk(KERN_NOTICE " BSTS called, 0x%02x returned\n",
bsts_result);
/*
* Try to match the object returned by INIT to the specific model.
* Handle every possible object (or the lack of thereof) the DSDT
* writers might throw at us. When in trouble, we pass NULL to
* asus_model_match() and try something completely different.
*/
if (buffer.pointer) {
model = buffer.pointer;
switch (model->type) {
case ACPI_TYPE_STRING:
string = model->string.pointer;
break;
case ACPI_TYPE_BUFFER:
string = model->buffer.pointer;
break;
default:
kfree(model);
break;
}
}
hotk->model = asus_model_match(string);
if (hotk->model == END_MODEL) { /* match failed */
if (asus_info &&
strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
hotk->model = P30;
printk(KERN_NOTICE
" Samsung P30 detected, supported\n");
} else {
hotk->model = M2E;
printk(KERN_NOTICE " unsupported model %s, trying "
"default values\n", string);
printk(KERN_NOTICE
" send /proc/acpi/dsdt to the developers\n");
}
hotk->methods = &model_conf[hotk->model];
return AE_OK;
}
hotk->methods = &model_conf[hotk->model];
printk(KERN_NOTICE " %s model detected, supported\n", string);
/* Sort of per-model blacklist */
if (strncmp(string, "L2B", 3) == 0)
hotk->methods->lcd_status = NULL;
/* L2B is similar enough to L3C to use its settings, with this only
exception */
else if (strncmp(string, "A3G", 3) == 0)
hotk->methods->lcd_status = "\\BLFG";
/* A3G is like M6R */
else if (strncmp(string, "S5N", 3) == 0 ||
strncmp(string, "M5N", 3) == 0 ||
strncmp(string, "W3N", 3) == 0)
hotk->methods->mt_mled = NULL;
/* S5N, M5N and W3N have no MLED */
else if (strncmp(string, "L5D", 3) == 0)
hotk->methods->mt_wled = NULL;
/* L5D's WLED is not controlled by ACPI */
else if (strncmp(string, "M2N", 3) == 0 ||
strncmp(string, "W3V", 3) == 0 ||
strncmp(string, "S1N", 3) == 0)
hotk->methods->mt_wled = "WLED";
/* M2N, S1N and W3V have a usable WLED */
else if (asus_info) {
if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
hotk->methods->mled_status = NULL;
/* S1300A reports L84F, but L1400B too, account for that */
}
kfree(model);
return AE_OK;
}
static int asus_hotk_check(void)
{
int result = 0;
result = acpi_bus_get_status(hotk->device);
if (result)
return result;
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
printk(KERN_ERR " Hotkey device not present, aborting\n");
return -EINVAL;
}
return result;
}
static int asus_hotk_found;
static int asus_hotk_add(struct acpi_device *device)
{
acpi_status status = AE_OK;
int result;
if (!device)
return -EINVAL;
printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
ASUS_ACPI_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
return -ENOMEM;
hotk->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
acpi_driver_data(device) = hotk;
hotk->device = device;
result = asus_hotk_check();
if (result)
goto end;
result = asus_hotk_add_fs(device);
if (result)
goto end;
/*
* We install the handler, it will receive the hotk in parameter, so, we
* could add other data to the hotk struct
*/
status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
asus_hotk_notify, hotk);
if (ACPI_FAILURE(status))
printk(KERN_ERR " Error installing notify handler\n");
/* For laptops without GPLV: init the hotk->brightness value */
if ((!hotk->methods->brightness_get)
&& (!hotk->methods->brightness_status)
&& (hotk->methods->brightness_up && hotk->methods->brightness_down)) {
status =
acpi_evaluate_object(NULL, hotk->methods->brightness_down,
NULL, NULL);
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Error changing brightness\n");
else {
status =
acpi_evaluate_object(NULL,
hotk->methods->brightness_up,
NULL, NULL);
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Strange, error changing"
" brightness\n");
}
}
asus_hotk_found = 1;
/* LED display is off by default */
hotk->ledd_status = 0xFFF;
end:
if (result) {
kfree(hotk);
}
return result;
}
static int asus_hotk_remove(struct acpi_device *device, int type)
{
acpi_status status = 0;
if (!device || !acpi_driver_data(device))
return -EINVAL;
status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
asus_hotk_notify);
if (ACPI_FAILURE(status))
printk(KERN_ERR "Asus ACPI: Error removing notify handler\n");
asus_hotk_remove_fs(device);
kfree(hotk);
return 0;
}
static struct backlight_ops asus_backlight_data = {
.get_brightness = read_brightness,
.update_status = set_brightness_status,
};
static void __exit asus_acpi_exit(void)
{
if (asus_backlight_device)
backlight_device_unregister(asus_backlight_device);
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
return;
}
static int __init asus_acpi_init(void)
{
int result;
if (acpi_disabled)
return -ENODEV;
asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
if (!asus_proc_dir) {
printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
return -ENODEV;
}
asus_proc_dir->owner = THIS_MODULE;
result = acpi_bus_register_driver(&asus_hotk_driver);
if (result < 0) {
remove_proc_entry(PROC_ASUS, acpi_root_dir);
return result;
}
/*
* This is a bit of a kludge. We only want this module loaded
* for ASUS systems, but there's currently no way to probe the
* ACPI namespace for ASUS HIDs. So we just return failure if
* we didn't find one, which will cause the module to be
* unloaded.
*/
if (!asus_hotk_found) {
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
return result;
}
asus_backlight_device = backlight_device_register("asus",NULL,NULL,
&asus_backlight_data);
if (IS_ERR(asus_backlight_device)) {
printk(KERN_ERR "Could not register asus backlight device\n");
asus_backlight_device = NULL;
asus_acpi_exit();
}
asus_backlight_device->props.max_brightness = 15;
return 0;
}
module_init(asus_acpi_init);
module_exit(asus_acpi_exit);