linux/arch/arm/mach-pxa
Nicolas Pitre 639da5ee37 ARM: add an extra temp register to the low level debugging addruart macro
Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.

Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-26 10:11:25 -04:00
..
include/mach ARM: add an extra temp register to the low level debugging addruart macro 2011-09-26 10:11:25 -04:00
am200epd.c ARM: pxa/am200epd: fix leak in am200_init_gpio_regs error path 2011-03-17 18:16:12 +08:00
am300epd.c ARM: pxa/am300epd: fix leak in am300_init_gpio_regs error path 2011-03-17 23:06:29 +08:00
balloon3.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
capc7117.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
clock-pxa2xx.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
clock-pxa3xx.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
clock.c ARM: pxa: add clk_set_rate() 2011-07-12 19:45:19 +08:00
clock.h ARM: pxa: add clk_set_rate() 2011-07-12 19:45:19 +08:00
cm-x2xx-pci.c Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 2011-07-29 23:35:05 -07:00
cm-x2xx-pci.h
cm-x2xx.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
cm-x255.c arm/pxa2xx: reorgazine SSP and SPI header files 2010-12-01 12:18:33 +01:00
cm-x270.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
cm-x300.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
colibri-evalboard.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
colibri-pxa3xx.c ARM: pxa: clean up set_pxa_fb_info 2011-03-16 16:32:47 +08:00
colibri-pxa270-income.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
colibri-pxa270.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
colibri-pxa300.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
colibri-pxa320.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
corgi_pm.c [ARM] pxa: removed mostly unused and confusing two sharpsl.h 2010-08-05 14:32:38 +08:00
corgi.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
cpufreq-pxa2xx.c ARM: pxa: Access SMEMC via virtual addresses 2010-12-16 14:31:16 +08:00
cpufreq-pxa3xx.c ARM: pxa: reduce the scope of get_clk_frequency_khz() 2010-10-09 17:07:30 +08:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
devices.c Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2011-03-26 10:03:03 +00:00
devices.h Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 2010-10-25 08:32:05 -07:00
em-x270.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
eseries.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
eseries.h
ezx.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
generic.c ARM: Fix build regression on SA11x0, PXA, and H720x targets 2011-01-15 00:14:25 +00:00
generic.h ARM: pxa: move declarations from generic.h to <soc>.h 2011-07-12 19:50:32 +08:00
gumstix.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
h5000.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
himalaya.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
hx4700.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
icontrol.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
idp.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
irq.c ARM: pxa: introduce {icip,ichp}_handle_irq() to prepare MULTI_IRQ_HANDLER 2011-07-12 19:50:28 +08:00
Kconfig mtd: pxa: convert to mtd_device_register() 2011-05-25 02:20:48 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds.c
leds.h
littleton.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
lpd270.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
lubbock.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
magician.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
mainstone.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
Makefile ARM: pxa: Rename Colibri evalboard 2010-12-20 23:07:42 +08:00
Makefile.boot
mfp-pxa2xx.c ARM: pxa: fix PGSR register address calculation 2011-07-06 23:47:40 +08:00
mfp-pxa3xx.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
mioa701_bootresume.S
mioa701.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
mp900.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
mxm8x10.c ARM: pxa2xx: reorganize I2C files 2011-03-21 09:09:33 +00:00
palm27x.c Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable 2011-03-26 10:03:03 +00:00
palmld.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmt5.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmtc.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmte2.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmtreo.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmtx.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
palmz72.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
pcm027.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
pcm990-baseboard.c Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2011-03-30 07:50:45 -07:00
pm.c ARM: pm: move cpu_init() call into core code 2011-06-24 08:48:43 +01:00
poodle.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx-ulpi.c ARM: pxa: fix pxa3xx-u2d crash when ULPI not used 2010-10-08 16:21:18 +08:00
pxa3xx.c Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc 2011-07-26 17:41:04 -07:00
pxa25x.c ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform code 2011-06-24 09:54:39 +01:00
pxa27x.c ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform code 2011-06-24 09:54:39 +01:00
pxa95x.c ARM: pxa: avoid accessing interrupt registers directly 2011-07-12 19:45:21 +08:00
pxa300.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa320.c ARM: Consolidate clks_register() and similar 2010-02-12 17:32:36 +00:00
pxa930.c ARM: pxa: support pxa95x 2010-12-18 21:02:14 +08:00
raumfeld.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
saarb.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
sharpsl_pm.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
sleep.S ARM: pm: pxa: move cpu_suspend into C code 2011-06-24 08:48:45 +01:00
smemc.c ARM / PXA: Use struct syscore_ops for "core" power management 2011-04-24 19:16:09 +02:00
spitz_pm.c gpio: include linux/gpio.h where needed 2011-06-16 08:40:44 -06:00
spitz.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
standby.S
stargate2.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
tavorevb3.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
tavorevb.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
time.c clocksource: convert ARM 32-bit up counting clocksources 2011-05-23 18:04:51 +01:00
tosa-bt.c ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now 2011-02-27 21:38:18 +08:00
tosa.c ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
trizeps4.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
viper.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
vpac270.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
xcep.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
z2.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
zeus.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00
zylonite_pxa300.c ARM: pxa2xx: reorganize I2C files 2011-03-21 09:09:33 +00:00
zylonite_pxa320.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite.c ARM: mach-pxa: convert boot_params to atag_offset 2011-08-21 17:15:07 -04:00