mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 16:41:58 +00:00
67ac6549b7
By renaming the ATA drive nodes to "ide@" we activate the semantic checks to the DT schema for the controller and use the correct notation for PATA drives. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
450 lines
12 KiB
Plaintext
450 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree file for Cortina systems Gemini SoC
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/clock/cortina,gemini-clock.h>
|
|
#include <dt-bindings/reset/cortina,gemini-reset.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&intcon>;
|
|
|
|
flash@30000000 {
|
|
compatible = "cortina,gemini-flash", "cfi-flash";
|
|
syscon = <&syscon>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pflash_default_pins>;
|
|
bank-width = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
syscon: syscon@40000000 {
|
|
compatible = "cortina,gemini-syscon",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x40000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&syscon>;
|
|
/* GLOBAL_RESET register */
|
|
offset = <0x0c>;
|
|
/* RESET_GLOBAL | RESET_CPU1 */
|
|
mask = <0xC0000000>;
|
|
};
|
|
|
|
pinctrl {
|
|
compatible = "cortina,gemini-pinctrl";
|
|
regmap = <&syscon>;
|
|
/* Hog the DRAM pins */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
|
|
<&vcontrol_default_pins>;
|
|
|
|
dram_default_pins: pinctrl-dram {
|
|
mux {
|
|
function = "dram";
|
|
groups = "dramgrp";
|
|
};
|
|
};
|
|
rtc_default_pins: pinctrl-rtc {
|
|
mux {
|
|
function = "rtc";
|
|
groups = "rtcgrp";
|
|
};
|
|
};
|
|
power_default_pins: pinctrl-power {
|
|
mux {
|
|
function = "power";
|
|
groups = "powergrp";
|
|
};
|
|
};
|
|
cir_default_pins: pinctrl-cir {
|
|
mux {
|
|
function = "cir";
|
|
groups = "cirgrp";
|
|
};
|
|
};
|
|
system_default_pins: pinctrl-system {
|
|
mux {
|
|
function = "system";
|
|
groups = "systemgrp";
|
|
};
|
|
};
|
|
vcontrol_default_pins: pinctrl-vcontrol {
|
|
mux {
|
|
function = "vcontrol";
|
|
groups = "vcontrolgrp";
|
|
};
|
|
};
|
|
ice_default_pins: pinctrl-ice {
|
|
mux {
|
|
function = "ice";
|
|
groups = "icegrp";
|
|
};
|
|
};
|
|
uart_default_pins: pinctrl-uart {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uartrxtxgrp";
|
|
};
|
|
};
|
|
pflash_default_pins: pinctrl-pflash {
|
|
mux {
|
|
function = "pflash";
|
|
groups = "pflashgrp";
|
|
};
|
|
};
|
|
usb_default_pins: pinctrl-usb {
|
|
mux {
|
|
function = "usb";
|
|
groups = "usbgrp";
|
|
};
|
|
};
|
|
gmii_default_pins: pinctrl-gmii {
|
|
/*
|
|
* Only activate GMAC0 by default since
|
|
* GMAC1 will overlap with 8 GPIO lines
|
|
* gpio2a, gpio2b. Overlay groups with
|
|
* "gmii_gmac0_grp", "gmii_gmac1_grp" for
|
|
* both ethernet interfaces.
|
|
*/
|
|
mux {
|
|
function = "gmii";
|
|
groups = "gmii_gmac0_grp";
|
|
};
|
|
};
|
|
pci_default_pins: pinctrl-pci {
|
|
mux {
|
|
function = "pci";
|
|
groups = "pcigrp";
|
|
};
|
|
};
|
|
sata_default_pins: pinctrl-sata {
|
|
mux {
|
|
function = "sata";
|
|
groups = "satagrp";
|
|
};
|
|
};
|
|
/* Activate both groups of pins for this state */
|
|
sata_and_ide_pins: pinctrl-sata-ide {
|
|
mux0 {
|
|
function = "sata";
|
|
groups = "satagrp";
|
|
};
|
|
mux1 {
|
|
function = "ide";
|
|
groups = "idegrp";
|
|
};
|
|
};
|
|
tvc_default_pins: pinctrl-tvc {
|
|
mux {
|
|
function = "tvc";
|
|
groups = "tvcgrp";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
watchdog@41000000 {
|
|
compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
|
|
reg = <0x41000000 0x1000>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_WDOG>;
|
|
clocks = <&syscon GEMINI_CLK_APB>;
|
|
clock-names = "PCLK";
|
|
};
|
|
|
|
uart0: serial@42000000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x42000000 0x100>;
|
|
resets = <&syscon GEMINI_RESET_UART>;
|
|
clocks = <&syscon GEMINI_CLK_UART>;
|
|
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart_default_pins>;
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
timer@43000000 {
|
|
compatible = "faraday,fttmr010";
|
|
reg = <0x43000000 0x1000>;
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
|
|
<15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
|
|
<16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
|
|
resets = <&syscon GEMINI_RESET_TIMER>;
|
|
/* APB clock or RTC clock */
|
|
clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
|
|
clock-names = "PCLK", "EXTCLK";
|
|
syscon = <&syscon>;
|
|
};
|
|
|
|
rtc@45000000 {
|
|
compatible = "cortina,gemini-rtc";
|
|
reg = <0x45000000 0x100>;
|
|
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_RTC>;
|
|
clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
|
|
clock-names = "PCLK", "EXTCLK";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_default_pins>;
|
|
};
|
|
|
|
sata: sata@46000000 {
|
|
compatible = "cortina,gemini-sata-bridge";
|
|
reg = <0x46000000 0x100>;
|
|
resets = <&syscon GEMINI_RESET_SATA0>,
|
|
<&syscon GEMINI_RESET_SATA1>;
|
|
reset-names = "sata0", "sata1";
|
|
clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
|
|
<&syscon GEMINI_CLK_GATE_SATA1>;
|
|
clock-names = "SATA0_PCLK", "SATA1_PCLK";
|
|
/*
|
|
* This defines the special "ide" state that needs
|
|
* to be explicitly enabled to enable the IDE pins,
|
|
* as these pins are normally used for other things.
|
|
*/
|
|
pinctrl-names = "default", "ide";
|
|
pinctrl-0 = <&sata_default_pins>;
|
|
pinctrl-1 = <&sata_and_ide_pins>;
|
|
syscon = <&syscon>;
|
|
status = "disabled";
|
|
};
|
|
|
|
intcon: interrupt-controller@48000000 {
|
|
compatible = "faraday,ftintc010";
|
|
reg = <0x48000000 0x1000>;
|
|
resets = <&syscon GEMINI_RESET_INTCON0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
power-controller@4b000000 {
|
|
compatible = "cortina,gemini-power-controller";
|
|
reg = <0x4b000000 0x100>;
|
|
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&power_default_pins>;
|
|
};
|
|
|
|
gpio0: gpio@4d000000 {
|
|
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
|
|
reg = <0x4d000000 0x100>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GPIO0>;
|
|
clocks = <&syscon GEMINI_CLK_APB>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio@4e000000 {
|
|
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
|
|
reg = <0x4e000000 0x100>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GPIO1>;
|
|
clocks = <&syscon GEMINI_CLK_APB>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@4f000000 {
|
|
compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
|
|
reg = <0x4f000000 0x100>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GPIO2>;
|
|
clocks = <&syscon GEMINI_CLK_APB>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pci@50000000 {
|
|
compatible = "cortina,gemini-pci", "faraday,ftpci100";
|
|
/*
|
|
* The first 256 bytes in the IO range is actually used
|
|
* to configure the host bridge.
|
|
*/
|
|
reg = <0x50000000 0x100>;
|
|
resets = <&syscon GEMINI_RESET_PCI>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
|
|
clock-names = "PCLK", "PCICLK";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pci_default_pins>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
status = "disabled";
|
|
|
|
bus-range = <0x00 0xff>;
|
|
/* PCI ranges mappings */
|
|
ranges =
|
|
/* 1MiB I/O space 0x50000000-0x500fffff */
|
|
<0x01000000 0 0 0x50000000 0 0x00100000>,
|
|
/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
|
|
<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
|
|
|
|
/* DMA ranges */
|
|
dma-ranges =
|
|
/* 128MiB at 0x00000000-0x07ffffff */
|
|
<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
|
|
/* 64MiB at 0x00000000-0x03ffffff */
|
|
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
|
|
/* 64MiB at 0x00000000-0x03ffffff */
|
|
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
|
|
|
|
/*
|
|
* This PCI host bridge variant has a cascaded interrupt
|
|
* controller embedded in the host bridge.
|
|
*/
|
|
pci_intc: interrupt-controller {
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
ethernet@60000000 {
|
|
compatible = "cortina,gemini-ethernet";
|
|
reg = <0x60000000 0x4000>, /* Global registers, queue */
|
|
<0x60004000 0x2000>, /* V-bit */
|
|
<0x60006000 0x2000>; /* A-bit */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmii_default_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gmac0: ethernet-port@0 {
|
|
compatible = "cortina,gemini-ethernet-port";
|
|
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
|
|
<0x6000a000 0x2000>; /* Port 0 GMAC */
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GMAC0>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
|
|
clock-names = "PCLK";
|
|
};
|
|
|
|
gmac1: ethernet-port@1 {
|
|
compatible = "cortina,gemini-ethernet-port";
|
|
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
|
|
<0x6000e000 0x2000>; /* Port 1 GMAC */
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GMAC1>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
|
|
clock-names = "PCLK";
|
|
};
|
|
};
|
|
|
|
ide@63000000 {
|
|
compatible = "cortina,gemini-pata", "faraday,ftide010";
|
|
reg = <0x63000000 0x1000>;
|
|
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
|
resets = <&syscon GEMINI_RESET_IDE>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_IDE>;
|
|
clock-names = "PCLK";
|
|
sata = <&sata>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ide@63400000 {
|
|
compatible = "cortina,gemini-pata", "faraday,ftide010";
|
|
reg = <0x63400000 0x1000>;
|
|
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
|
|
resets = <&syscon GEMINI_RESET_IDE>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_IDE>;
|
|
clock-names = "PCLK";
|
|
sata = <&sata>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
dma-controller@67000000 {
|
|
compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
|
|
/* Faraday Technology FTDMAC020 variant */
|
|
arm,primecell-periphid = <0x0003b080>;
|
|
reg = <0x67000000 0x1000>;
|
|
interrupts = <9 IRQ_TYPE_EDGE_RISING>;
|
|
resets = <&syscon GEMINI_RESET_DMAC>;
|
|
clocks = <&syscon GEMINI_CLK_AHB>;
|
|
clock-names = "apb_pclk";
|
|
/* Bus interface AHB1 (AHB0) is totally tilted */
|
|
lli-bus-interface-ahb2;
|
|
mem-bus-interface-ahb2;
|
|
memcpy-burst-size = <256>;
|
|
memcpy-bus-width = <32>;
|
|
#dma-cells = <2>;
|
|
};
|
|
|
|
display-controller@6a000000 {
|
|
compatible = "cortina,gemini-tvc", "faraday,tve200";
|
|
reg = <0x6a000000 0x1000>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_RISING>;
|
|
resets = <&syscon GEMINI_RESET_TVC>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_TVC>,
|
|
<&syscon GEMINI_CLK_TVC>;
|
|
clock-names = "PCLK", "TVE";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tvc_default_pins>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@68000000 {
|
|
compatible = "cortina,gemini-usb", "faraday,fotg210";
|
|
reg = <0x68000000 0x1000>;
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_USB0>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_USB0>;
|
|
clock-names = "PCLK";
|
|
/*
|
|
* This will claim pins for USB0 and USB1 at the same
|
|
* time as they are using some common pins. If you for
|
|
* some reason have a system using USB1 at 96000000 but
|
|
* NOT using USB0 at 68000000 you wll have to add the
|
|
* usb_default_pins to the USB controller at 96000000
|
|
* in your .dts for the board.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_default_pins>;
|
|
syscon = <&syscon>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@69000000 {
|
|
compatible = "cortina,gemini-usb", "faraday,fotg210";
|
|
reg = <0x69000000 0x1000>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_USB1>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_USB1>;
|
|
clock-names = "PCLK";
|
|
syscon = <&syscon>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|