mirror of
https://github.com/torvalds/linux.git
synced 2024-11-20 11:01:38 +00:00
c75059c462
NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUhik9AAoJEFmIoMA60/r8tAQQAJ3Rv5MlHt63cXxgIMOcoLrR OsFvW+2oMTyUkGg69SgI3YfF9IBjdwkJ3U6OnpfPGcbKyQvmSTxwCEZPVYM9r3mC 1UknItYLXSFsz682sXGrepHoL/N3Im0fhu56oEJwIL+htHNMgGKk+Sk6yW9rBVvz J7fw31mlrs5YnjkLvwbDjmS3fpCmjqb5fkNlZHxwKcPtM/ODfbRnYYvSucN9Relt xy2MyuXlZvp7aPwi03z7utZx1ezjzfVlGNlCWyVINERvqbKYeIrAGbfwmVdCVRRf 2kqNS5N6B1IHq6iHg5xbjh9ZOdzYu2bPO4v7qgDEUDWzT0JTes4mOrv5NJWk4ZV/ 0erFLOkaCzHpriAXYN8qSfJilm40EYt+hKQI3f8jaTEOycOTWgOcVh9ci7uaNWgX 6Ia9Ch+FXbMg3deL+MwfFQFNbkMzgeNihLZW7xf54psWJobQ3v4eG2KTRqCaOqI0 87tMWPSzOqqnQEUWGw0rTSS7P5UxgKc27Qw83OaaIMz8G3ibSc4VhZT/PpBCQog9 M6ezsxNhJ6rj/81mM5jElzGHQeHUnsAahcQscvva07q6UcRx7JhWVLW0E6l+gyD+ u1XWZQi5b3PwVlJRyv3sKgFpFjsH8pu7wBL8F13NHd0eb4M5m3ZUZmBbXktF0dLc V0H7kqLWqkTCXo7omekm =kKg9 -----END PGP SIGNATURE----- Merge tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Here are the PCI changes intended for v3.19. I don't think there's anything very exciting here, but there was a lot of MSI-related stuff coming via Thomas. Details: NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert)" * tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits) PCI: Remove fixed parameter in pci_iov_resource_bar() PCI: Add informational printk for invalid BARs PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM PCI: spear: Remove unnecessary OOM message PCI: mvebu: Add a blank line after declarations PCI: designware: Add a blank line after declarations PCI: exynos: Remove unnecessary return statement PCI: imx6: Use tabs for indentation PCI: keystone: Remove unnecessary OOM message PCI: Remove unused and broken to_hotplug_slot() PCI: Make FLR and AF FLR reset warning messages different PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() PCI: layerscape: Add Freescale Layerscape PCIe driver PCI: Simplify if-return sequences PCI: Delete unnecessary NULL pointer checks PCI: Shrink decoding-disabled window while sizing BARs ...
517 lines
14 KiB
C
517 lines
14 KiB
C
/*
|
|
* Designware application register space functions for Keystone PCI controller
|
|
*
|
|
* Copyright (C) 2013-2014 Texas Instruments., Ltd.
|
|
* http://www.ti.com
|
|
*
|
|
* Author: Murali Karicheri <m-karicheri2@ti.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "pcie-designware.h"
|
|
#include "pci-keystone.h"
|
|
|
|
/* Application register defines */
|
|
#define LTSSM_EN_VAL 1
|
|
#define LTSSM_STATE_MASK 0x1f
|
|
#define LTSSM_STATE_L0 0x11
|
|
#define DBI_CS2_EN_VAL 0x20
|
|
#define OB_XLAT_EN_VAL 2
|
|
|
|
/* Application registers */
|
|
#define CMD_STATUS 0x004
|
|
#define CFG_SETUP 0x008
|
|
#define OB_SIZE 0x030
|
|
#define CFG_PCIM_WIN_SZ_IDX 3
|
|
#define CFG_PCIM_WIN_CNT 32
|
|
#define SPACE0_REMOTE_CFG_OFFSET 0x1000
|
|
#define OB_OFFSET_INDEX(n) (0x200 + (8 * n))
|
|
#define OB_OFFSET_HI(n) (0x204 + (8 * n))
|
|
|
|
/* IRQ register defines */
|
|
#define IRQ_EOI 0x050
|
|
#define IRQ_STATUS 0x184
|
|
#define IRQ_ENABLE_SET 0x188
|
|
#define IRQ_ENABLE_CLR 0x18c
|
|
|
|
#define MSI_IRQ 0x054
|
|
#define MSI0_IRQ_STATUS 0x104
|
|
#define MSI0_IRQ_ENABLE_SET 0x108
|
|
#define MSI0_IRQ_ENABLE_CLR 0x10c
|
|
#define IRQ_STATUS 0x184
|
|
#define MSI_IRQ_OFFSET 4
|
|
|
|
/* Config space registers */
|
|
#define DEBUG0 0x728
|
|
|
|
#define to_keystone_pcie(x) container_of(x, struct keystone_pcie, pp)
|
|
|
|
static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
|
|
{
|
|
return sys->private_data;
|
|
}
|
|
|
|
static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
|
|
u32 *bit_pos)
|
|
{
|
|
*reg_offset = offset % 8;
|
|
*bit_pos = offset >> 3;
|
|
}
|
|
|
|
u32 ks_dw_pcie_get_msi_addr(struct pcie_port *pp)
|
|
{
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
|
|
return ks_pcie->app.start + MSI_IRQ;
|
|
}
|
|
|
|
void ks_dw_pcie_handle_msi_irq(struct keystone_pcie *ks_pcie, int offset)
|
|
{
|
|
struct pcie_port *pp = &ks_pcie->pp;
|
|
u32 pending, vector;
|
|
int src, virq;
|
|
|
|
pending = readl(ks_pcie->va_app_base + MSI0_IRQ_STATUS + (offset << 4));
|
|
|
|
/*
|
|
* MSI0 status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
|
|
* shows 1, 9, 17, 25 and so forth
|
|
*/
|
|
for (src = 0; src < 4; src++) {
|
|
if (BIT(src) & pending) {
|
|
vector = offset + (src << 3);
|
|
virq = irq_linear_revmap(pp->irq_domain, vector);
|
|
dev_dbg(pp->dev, "irq: bit %d, vector %d, virq %d\n",
|
|
src, vector, virq);
|
|
generic_handle_irq(virq);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ks_dw_pcie_msi_irq_ack(struct irq_data *d)
|
|
{
|
|
u32 offset, reg_offset, bit_pos;
|
|
struct keystone_pcie *ks_pcie;
|
|
unsigned int irq = d->irq;
|
|
struct msi_desc *msi;
|
|
struct pcie_port *pp;
|
|
|
|
msi = irq_get_msi_desc(irq);
|
|
pp = sys_to_pcie(msi->dev->bus->sysdata);
|
|
ks_pcie = to_keystone_pcie(pp);
|
|
offset = irq - irq_linear_revmap(pp->irq_domain, 0);
|
|
update_reg_offset_bit_pos(offset, ®_offset, &bit_pos);
|
|
|
|
writel(BIT(bit_pos),
|
|
ks_pcie->va_app_base + MSI0_IRQ_STATUS + (reg_offset << 4));
|
|
writel(reg_offset + MSI_IRQ_OFFSET, ks_pcie->va_app_base + IRQ_EOI);
|
|
}
|
|
|
|
void ks_dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
|
|
{
|
|
u32 reg_offset, bit_pos;
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
|
|
update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
|
|
writel(BIT(bit_pos),
|
|
ks_pcie->va_app_base + MSI0_IRQ_ENABLE_SET + (reg_offset << 4));
|
|
}
|
|
|
|
void ks_dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
|
|
{
|
|
u32 reg_offset, bit_pos;
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
|
|
update_reg_offset_bit_pos(irq, ®_offset, &bit_pos);
|
|
writel(BIT(bit_pos),
|
|
ks_pcie->va_app_base + MSI0_IRQ_ENABLE_CLR + (reg_offset << 4));
|
|
}
|
|
|
|
static void ks_dw_pcie_msi_irq_mask(struct irq_data *d)
|
|
{
|
|
struct keystone_pcie *ks_pcie;
|
|
unsigned int irq = d->irq;
|
|
struct msi_desc *msi;
|
|
struct pcie_port *pp;
|
|
u32 offset;
|
|
|
|
msi = irq_get_msi_desc(irq);
|
|
pp = sys_to_pcie(msi->dev->bus->sysdata);
|
|
ks_pcie = to_keystone_pcie(pp);
|
|
offset = irq - irq_linear_revmap(pp->irq_domain, 0);
|
|
|
|
/* Mask the end point if PVM implemented */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
if (msi->msi_attrib.maskbit)
|
|
pci_msi_mask_irq(d);
|
|
}
|
|
|
|
ks_dw_pcie_msi_clear_irq(pp, offset);
|
|
}
|
|
|
|
static void ks_dw_pcie_msi_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct keystone_pcie *ks_pcie;
|
|
unsigned int irq = d->irq;
|
|
struct msi_desc *msi;
|
|
struct pcie_port *pp;
|
|
u32 offset;
|
|
|
|
msi = irq_get_msi_desc(irq);
|
|
pp = sys_to_pcie(msi->dev->bus->sysdata);
|
|
ks_pcie = to_keystone_pcie(pp);
|
|
offset = irq - irq_linear_revmap(pp->irq_domain, 0);
|
|
|
|
/* Mask the end point if PVM implemented */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
if (msi->msi_attrib.maskbit)
|
|
pci_msi_unmask_irq(d);
|
|
}
|
|
|
|
ks_dw_pcie_msi_set_irq(pp, offset);
|
|
}
|
|
|
|
static struct irq_chip ks_dw_pcie_msi_irq_chip = {
|
|
.name = "Keystone-PCIe-MSI-IRQ",
|
|
.irq_ack = ks_dw_pcie_msi_irq_ack,
|
|
.irq_mask = ks_dw_pcie_msi_irq_mask,
|
|
.irq_unmask = ks_dw_pcie_msi_irq_unmask,
|
|
};
|
|
|
|
static int ks_dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &ks_dw_pcie_msi_irq_chip,
|
|
handle_level_irq);
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops ks_dw_pcie_msi_domain_ops = {
|
|
.map = ks_dw_pcie_msi_map,
|
|
};
|
|
|
|
int ks_dw_pcie_msi_host_init(struct pcie_port *pp, struct msi_controller *chip)
|
|
{
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
int i;
|
|
|
|
pp->irq_domain = irq_domain_add_linear(ks_pcie->msi_intc_np,
|
|
MAX_MSI_IRQS,
|
|
&ks_dw_pcie_msi_domain_ops,
|
|
chip);
|
|
if (!pp->irq_domain) {
|
|
dev_err(pp->dev, "irq domain init failed\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
for (i = 0; i < MAX_MSI_IRQS; i++)
|
|
irq_create_mapping(pp->irq_domain, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_LEGACY_IRQS; i++)
|
|
writel(0x1, ks_pcie->va_app_base + IRQ_ENABLE_SET + (i << 4));
|
|
}
|
|
|
|
void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset)
|
|
{
|
|
struct pcie_port *pp = &ks_pcie->pp;
|
|
u32 pending;
|
|
int virq;
|
|
|
|
pending = readl(ks_pcie->va_app_base + IRQ_STATUS + (offset << 4));
|
|
|
|
if (BIT(0) & pending) {
|
|
virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
|
|
dev_dbg(pp->dev, ": irq: irq_offset %d, virq %d\n", offset,
|
|
virq);
|
|
generic_handle_irq(virq);
|
|
}
|
|
|
|
/* EOI the INTx interrupt */
|
|
writel(offset, ks_pcie->va_app_base + IRQ_EOI);
|
|
}
|
|
|
|
static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void ks_dw_pcie_mask_legacy_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void ks_dw_pcie_unmask_legacy_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip ks_dw_pcie_legacy_irq_chip = {
|
|
.name = "Keystone-PCI-Legacy-IRQ",
|
|
.irq_ack = ks_dw_pcie_ack_legacy_irq,
|
|
.irq_mask = ks_dw_pcie_mask_legacy_irq,
|
|
.irq_unmask = ks_dw_pcie_unmask_legacy_irq,
|
|
};
|
|
|
|
static int ks_dw_pcie_init_legacy_irq_map(struct irq_domain *d,
|
|
unsigned int irq, irq_hw_number_t hw_irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &ks_dw_pcie_legacy_irq_chip,
|
|
handle_level_irq);
|
|
irq_set_chip_data(irq, d->host_data);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops ks_dw_pcie_legacy_irq_domain_ops = {
|
|
.map = ks_dw_pcie_init_legacy_irq_map,
|
|
.xlate = irq_domain_xlate_onetwocell,
|
|
};
|
|
|
|
/**
|
|
* ks_dw_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask
|
|
* registers
|
|
*
|
|
* Since modification of dbi_cs2 involves different clock domain, read the
|
|
* status back to ensure the transition is complete.
|
|
*/
|
|
static void ks_dw_pcie_set_dbi_mode(void __iomem *reg_virt)
|
|
{
|
|
u32 val;
|
|
|
|
writel(DBI_CS2_EN_VAL | readl(reg_virt + CMD_STATUS),
|
|
reg_virt + CMD_STATUS);
|
|
|
|
do {
|
|
val = readl(reg_virt + CMD_STATUS);
|
|
} while (!(val & DBI_CS2_EN_VAL));
|
|
}
|
|
|
|
/**
|
|
* ks_dw_pcie_clear_dbi_mode() - Disable DBI mode
|
|
*
|
|
* Since modification of dbi_cs2 involves different clock domain, read the
|
|
* status back to ensure the transition is complete.
|
|
*/
|
|
static void ks_dw_pcie_clear_dbi_mode(void __iomem *reg_virt)
|
|
{
|
|
u32 val;
|
|
|
|
writel(~DBI_CS2_EN_VAL & readl(reg_virt + CMD_STATUS),
|
|
reg_virt + CMD_STATUS);
|
|
|
|
do {
|
|
val = readl(reg_virt + CMD_STATUS);
|
|
} while (val & DBI_CS2_EN_VAL);
|
|
}
|
|
|
|
void ks_dw_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
|
|
{
|
|
struct pcie_port *pp = &ks_pcie->pp;
|
|
u32 start = pp->mem.start, end = pp->mem.end;
|
|
int i, tr_size;
|
|
|
|
/* Disable BARs for inbound access */
|
|
ks_dw_pcie_set_dbi_mode(ks_pcie->va_app_base);
|
|
writel(0, pp->dbi_base + PCI_BASE_ADDRESS_0);
|
|
writel(0, pp->dbi_base + PCI_BASE_ADDRESS_1);
|
|
ks_dw_pcie_clear_dbi_mode(ks_pcie->va_app_base);
|
|
|
|
/* Set outbound translation size per window division */
|
|
writel(CFG_PCIM_WIN_SZ_IDX & 0x7, ks_pcie->va_app_base + OB_SIZE);
|
|
|
|
tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M;
|
|
|
|
/* Using Direct 1:1 mapping of RC <-> PCI memory space */
|
|
for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) {
|
|
writel(start | 1, ks_pcie->va_app_base + OB_OFFSET_INDEX(i));
|
|
writel(0, ks_pcie->va_app_base + OB_OFFSET_HI(i));
|
|
start += tr_size;
|
|
}
|
|
|
|
/* Enable OB translation */
|
|
writel(OB_XLAT_EN_VAL | readl(ks_pcie->va_app_base + CMD_STATUS),
|
|
ks_pcie->va_app_base + CMD_STATUS);
|
|
}
|
|
|
|
/**
|
|
* ks_pcie_cfg_setup() - Set up configuration space address for a device
|
|
*
|
|
* @ks_pcie: ptr to keystone_pcie structure
|
|
* @bus: Bus number the device is residing on
|
|
* @devfn: device, function number info
|
|
*
|
|
* Forms and returns the address of configuration space mapped in PCIESS
|
|
* address space 0. Also configures CFG_SETUP for remote configuration space
|
|
* access.
|
|
*
|
|
* The address space has two regions to access configuration - local and remote.
|
|
* We access local region for bus 0 (as RC is attached on bus 0) and remote
|
|
* region for others with TYPE 1 access when bus > 1. As for device on bus = 1,
|
|
* we will do TYPE 0 access as it will be on our secondary bus (logical).
|
|
* CFG_SETUP is needed only for remote configuration access.
|
|
*/
|
|
static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus,
|
|
unsigned int devfn)
|
|
{
|
|
u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn);
|
|
struct pcie_port *pp = &ks_pcie->pp;
|
|
u32 regval;
|
|
|
|
if (bus == 0)
|
|
return pp->dbi_base;
|
|
|
|
regval = (bus << 16) | (device << 8) | function;
|
|
|
|
/*
|
|
* Since Bus#1 will be a virtual bus, we need to have TYPE0
|
|
* access only.
|
|
* TYPE 1
|
|
*/
|
|
if (bus != 1)
|
|
regval |= BIT(24);
|
|
|
|
writel(regval, ks_pcie->va_app_base + CFG_SETUP);
|
|
return pp->va_cfg0_base;
|
|
}
|
|
|
|
int ks_dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
unsigned int devfn, int where, int size, u32 *val)
|
|
{
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
u8 bus_num = bus->number;
|
|
void __iomem *addr;
|
|
|
|
addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
|
|
|
|
return dw_pcie_cfg_read(addr + (where & ~0x3), where, size, val);
|
|
}
|
|
|
|
int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
unsigned int devfn, int where, int size, u32 val)
|
|
{
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
u8 bus_num = bus->number;
|
|
void __iomem *addr;
|
|
|
|
addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
|
|
|
|
return dw_pcie_cfg_write(addr + (where & ~0x3), where, size, val);
|
|
}
|
|
|
|
/**
|
|
* ks_dw_pcie_v3_65_scan_bus() - keystone scan_bus post initialization
|
|
*
|
|
* This sets BAR0 to enable inbound access for MSI_IRQ register
|
|
*/
|
|
void ks_dw_pcie_v3_65_scan_bus(struct pcie_port *pp)
|
|
{
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
|
|
|
|
/* Configure and set up BAR0 */
|
|
ks_dw_pcie_set_dbi_mode(ks_pcie->va_app_base);
|
|
|
|
/* Enable BAR0 */
|
|
writel(1, pp->dbi_base + PCI_BASE_ADDRESS_0);
|
|
writel(SZ_4K - 1, pp->dbi_base + PCI_BASE_ADDRESS_0);
|
|
|
|
ks_dw_pcie_clear_dbi_mode(ks_pcie->va_app_base);
|
|
|
|
/*
|
|
* For BAR0, just setting bus address for inbound writes (MSI) should
|
|
* be sufficient. Use physical address to avoid any conflicts.
|
|
*/
|
|
writel(ks_pcie->app.start, pp->dbi_base + PCI_BASE_ADDRESS_0);
|
|
}
|
|
|
|
/**
|
|
* ks_dw_pcie_link_up() - Check if link up
|
|
*/
|
|
int ks_dw_pcie_link_up(struct pcie_port *pp)
|
|
{
|
|
u32 val = readl(pp->dbi_base + DEBUG0);
|
|
|
|
return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0;
|
|
}
|
|
|
|
void ks_dw_pcie_initiate_link_train(struct keystone_pcie *ks_pcie)
|
|
{
|
|
u32 val;
|
|
|
|
/* Disable Link training */
|
|
val = readl(ks_pcie->va_app_base + CMD_STATUS);
|
|
val &= ~LTSSM_EN_VAL;
|
|
writel(LTSSM_EN_VAL | val, ks_pcie->va_app_base + CMD_STATUS);
|
|
|
|
/* Initiate Link Training */
|
|
val = readl(ks_pcie->va_app_base + CMD_STATUS);
|
|
writel(LTSSM_EN_VAL | val, ks_pcie->va_app_base + CMD_STATUS);
|
|
}
|
|
|
|
/**
|
|
* ks_dw_pcie_host_init() - initialize host for v3_65 dw hardware
|
|
*
|
|
* Ioremap the register resources, initialize legacy irq domain
|
|
* and call dw_pcie_v3_65_host_init() API to initialize the Keystone
|
|
* PCI host controller.
|
|
*/
|
|
int __init ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie,
|
|
struct device_node *msi_intc_np)
|
|
{
|
|
struct pcie_port *pp = &ks_pcie->pp;
|
|
struct platform_device *pdev = to_platform_device(pp->dev);
|
|
struct resource *res;
|
|
|
|
/* Index 0 is the config reg. space address */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pp->dbi_base = devm_ioremap_resource(pp->dev, res);
|
|
if (IS_ERR(pp->dbi_base))
|
|
return PTR_ERR(pp->dbi_base);
|
|
|
|
/*
|
|
* We set these same and is used in pcie rd/wr_other_conf
|
|
* functions
|
|
*/
|
|
pp->va_cfg0_base = pp->dbi_base + SPACE0_REMOTE_CFG_OFFSET;
|
|
pp->va_cfg1_base = pp->va_cfg0_base;
|
|
|
|
/* Index 1 is the application reg. space address */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
ks_pcie->app = *res;
|
|
ks_pcie->va_app_base = devm_ioremap_resource(pp->dev, res);
|
|
if (IS_ERR(ks_pcie->va_app_base))
|
|
return PTR_ERR(ks_pcie->va_app_base);
|
|
|
|
/* Create legacy IRQ domain */
|
|
ks_pcie->legacy_irq_domain =
|
|
irq_domain_add_linear(ks_pcie->legacy_intc_np,
|
|
MAX_LEGACY_IRQS,
|
|
&ks_dw_pcie_legacy_irq_domain_ops,
|
|
NULL);
|
|
if (!ks_pcie->legacy_irq_domain) {
|
|
dev_err(pp->dev, "Failed to add irq domain for legacy irqs\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return dw_pcie_host_init(pp);
|
|
}
|