mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 18:41:48 +00:00
1009aa1205
This tag contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make it
to userspace. Support for three devices has been added:
* Support for the ISA-mandated timers on RISC-V systems.
* Support for the ISA-mandated first-level interrupt controller on
RISC-V systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
* Support for SiFive's platform-level interrupt controller, which talks
to the actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
* Build fixes for various configurations
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary for
some 32-bit configurations.
* !SMP && PERF_EVENTS
* Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
* Fixes to ptrace(), which while not being sufficient to fully make GDB
work are at least sufficient to get simple GDB tasks to work.
* Early printk support via RISC-V's architecturally mandated SBI console
device.
* A fix to our early debug trap handler to ensure it's always aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for me,
and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on
the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the new
drivers in shape!
-----BEGIN PGP SIGNATURE-----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=PfnC
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make
it to userspace. Support for three devices has been added:
- the ISA-mandated timers on RISC-V systems.
- the ISA-mandated first-level interrupt controller on RISC-V
systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
- SiFive's platform-level interrupt controller, which talks to the
actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
- build fixes for various configurations:
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary
for some 32-bit configurations.
* !SMP && PERF_EVENTS
- Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
- Fixes to ptrace(), which while not being sufficient to fully make
GDB work are at least sufficient to get simple GDB tasks to work.
- Early printk support via RISC-V's architecturally mandated SBI
console device.
- A fix to our early debug trap handler to ensure it's always
aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for
me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
on the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the
new drivers in shape!"
* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
dt-bindings: interrupt-controller: RISC-V local interrupt controller
RISC-V: Fix !CONFIG_SMP compilation error
irqchip: add a SiFive PLIC driver
RISC-V: Add the directive for alignment of stvec's value
clocksource: new RISC-V SBI timer driver
RISC-V: implement low-level interrupt handling
RISC-V: add a definition for the SIE SEIE bit
RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
RISC-V: simplify software interrupt / IPI code
RISC-V: remove timer leftovers
RISC-V: Add early printk support via the SBI console
RISC-V: Don't increment sepc after breakpoint.
RISC-V: implement __lshrti3.
RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
|
||
|---|---|---|
| .. | ||
| acpi_pm.c | ||
| arc_timer.c | ||
| arm_arch_timer.c | ||
| arm_global_timer.c | ||
| armv7m_systick.c | ||
| asm9260_timer.c | ||
| bcm2835_timer.c | ||
| bcm_kona_timer.c | ||
| cadence_ttc_timer.c | ||
| clksrc_st_lpc.c | ||
| clksrc-dbx500-prcmu.c | ||
| clps711x-timer.c | ||
| cs5535-clockevt.c | ||
| dummy_timer.c | ||
| dw_apb_timer_of.c | ||
| dw_apb_timer.c | ||
| em_sti.c | ||
| exynos_mct.c | ||
| fsl_ftm_timer.c | ||
| h8300_timer8.c | ||
| h8300_timer16.c | ||
| h8300_tpu.c | ||
| i8253.c | ||
| jcore-pit.c | ||
| Kconfig | ||
| Makefile | ||
| meson6_timer.c | ||
| mips-gic-timer.c | ||
| mmio.c | ||
| mps2-timer.c | ||
| mxs_timer.c | ||
| nomadik-mtu.c | ||
| numachip.c | ||
| owl-timer.c | ||
| pxa_timer.c | ||
| qcom-timer.c | ||
| renesas-ostm.c | ||
| riscv_timer.c | ||
| rockchip_timer.c | ||
| samsung_pwm_timer.c | ||
| scx200_hrt.c | ||
| sh_cmt.c | ||
| sh_mtu2.c | ||
| sh_tmu.c | ||
| sun4i_timer.c | ||
| tango_xtal.c | ||
| tcb_clksrc.c | ||
| tegra20_timer.c | ||
| time-armada-370-xp.c | ||
| time-efm32.c | ||
| time-lpc32xx.c | ||
| time-orion.c | ||
| time-pistachio.c | ||
| timer-atcpit100.c | ||
| timer-atlas7.c | ||
| timer-atmel-pit.c | ||
| timer-atmel-st.c | ||
| timer-digicolor.c | ||
| timer-fttmr010.c | ||
| timer-imx-gpt.c | ||
| timer-imx-tpm.c | ||
| timer-integrator-ap.c | ||
| timer-keystone.c | ||
| timer-mediatek.c | ||
| timer-npcm7xx.c | ||
| timer-nps.c | ||
| timer-of.c | ||
| timer-of.h | ||
| timer-oxnas-rps.c | ||
| timer-prima2.c | ||
| timer-probe.c | ||
| timer-sp804.c | ||
| timer-sp.h | ||
| timer-sprd.c | ||
| timer-stm32.c | ||
| timer-sun5i.c | ||
| timer-ti-32k.c | ||
| timer-ti-dm.c | ||
| timer-u300.c | ||
| versatile.c | ||
| vf_pit_timer.c | ||
| vt8500_timer.c | ||
| zevio-timer.c | ||