linux/arch/arm/mach-omap1/i2c.c
Tony Lindgren a6cf912c60 ARM: OMAP: Fix i2c cmdline initcall for multiplatform
We only want this initcall to run when the kernel is
booted on omap SoCs. Fix the issue by initializing the
the initcall from separately for omap1 and omap2+.

This fixes the issue for omap2+ multiplatform configs
as we are using omap_subsys_initcall there.

Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-11 11:24:19 -08:00

100 lines
2.5 KiB
C

/*
* Helper module for board specific I2C bus registration
*
* Copyright (C) 2009 Nokia Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/i2c-omap.h>
#include <mach/mux.h>
#include "soc.h"
#include <plat/i2c.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
static struct resource i2c_resources[2] = {
};
static struct platform_device omap_i2c_devices[1] = {
};
static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
omap_cfg_reg(I2C_7XX_SCL);
} else {
omap_cfg_reg(I2C_SDA);
omap_cfg_reg(I2C_SCL);
}
}
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
int bus_id)
{
struct platform_device *pdev;
struct resource *res;
if (bus_id > 1)
return -EINVAL;
omap1_i2c_mux_pins(bus_id);
pdev = &omap_i2c_devices[bus_id - 1];
pdev->id = bus_id;
pdev->name = name;
pdev->num_resources = ARRAY_SIZE(i2c_resources);
res = i2c_resources;
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
res[0].flags = IORESOURCE_MEM;
res[1].start = OMAP1_INT_I2C;
res[1].flags = IORESOURCE_IRQ;
pdev->resource = res;
/* all OMAP1 have IP version 1 register set */
pdata->rev = OMAP_I2C_IP_VERSION_1;
/* all OMAP1 I2C are implemented like this */
pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
OMAP_I2C_FLAG_SIMPLE_CLOCK |
OMAP_I2C_FLAG_16BIT_DATA_REG |
OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
/* how the cpu bus is wired up differs for 7xx only */
if (cpu_is_omap7xx())
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
else
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
pdev->dev.platform_data = pdata;
return platform_device_register(pdev);
}
static int __init omap_i2c_cmdline(void)
{
return omap_register_i2c_bus_cmdline();
}
subsys_initcall(omap_i2c_cmdline);