mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 17:12:06 +00:00
242d8cf626
* clk-mediatek: clk: mediatek: mux: Update parent at enable time clk: mediatek: mux: Drop unused clock ops clk: mediatek: Select all the MT8183 clocks by default * clk-imx: dt-bindings: clock: imx: Switch to my personal address MAINTAINERS: Add section for NXP i.MX clock drivers clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header clk: imx8mn: add clkout1/2 support clk: imx8mm: add clkout1/2 support clk: imx8mq: add PLL monitor output clk: imx: clk-imx31: Remove unused static const table 'uart_clks' clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2() clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks * clk-amlogic: clk: meson: axg: Remove MIPI enable clock gate clk: meson-axg: remove CLKID_MIPI_ENABLE dt-bindings: clock: meson8b: remove non-existing clock macros clk: meson: meson8b: remove compatibility code for old .dtbs clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate() clk: meson: clk-pll: make "ret" a signed integer clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL * clk-at91: clk: at91: Fix the declaration of the clocks |
||
|---|---|---|
| .. | ||
| arm | ||
| bus | ||
| clk | ||
| clock | ||
| display | ||
| dma | ||
| firmware/imx | ||
| gce | ||
| gpio | ||
| i2c | ||
| iio | ||
| input | ||
| interconnect | ||
| interrupt-controller | ||
| leds | ||
| mailbox | ||
| media | ||
| memory | ||
| mfd | ||
| mips | ||
| mux | ||
| net | ||
| phy | ||
| pinctrl | ||
| pmu | ||
| power | ||
| pwm | ||
| regulator | ||
| reset | ||
| reset-controller | ||
| soc | ||
| sound | ||
| spmi | ||
| thermal | ||
| usb | ||