mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
a2fa882d6d
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some debug prints are cleaned up with a macro, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-7-tiwai@suse.de
841 lines
21 KiB
C
841 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) by Uros Bizjak <uros@kss-loka.si>
|
|
*
|
|
* Midi synth routines for OPL2/OPL3/OPL4 FM
|
|
*/
|
|
|
|
#undef DEBUG_ALLOC
|
|
#undef DEBUG_MIDI
|
|
|
|
#include "opl3_voice.h"
|
|
#include <sound/asoundef.h>
|
|
|
|
#ifdef DEBUG_MIDI
|
|
#define opl3_dbg(opl3, fmt, ...) \
|
|
dev_dbg(((struct snd_opl3 *)(opl3))->card->dev, fmt, ##__VA_ARGS__)
|
|
#else
|
|
#define opl3_dbg(opl3, fmt, ...) do {} while (0)
|
|
#endif
|
|
|
|
static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
|
|
struct snd_midi_channel *chan);
|
|
/*
|
|
* The next table looks magical, but it certainly is not. Its values have
|
|
* been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception
|
|
* for i=0. This log-table converts a linear volume-scaling (0..127) to a
|
|
* logarithmic scaling as present in the FM-synthesizer chips. so : Volume
|
|
* 64 = 0 db = relative volume 0 and: Volume 32 = -6 db = relative
|
|
* volume -8 it was implemented as a table because it is only 128 bytes and
|
|
* it saves a lot of log() calculations. (Rob Hooft <hooft@chem.ruu.nl>)
|
|
*/
|
|
|
|
static const char opl3_volume_table[128] =
|
|
{
|
|
-63, -48, -40, -35, -32, -29, -27, -26,
|
|
-24, -23, -21, -20, -19, -18, -18, -17,
|
|
-16, -15, -15, -14, -13, -13, -12, -12,
|
|
-11, -11, -10, -10, -10, -9, -9, -8,
|
|
-8, -8, -7, -7, -7, -6, -6, -6,
|
|
-5, -5, -5, -5, -4, -4, -4, -4,
|
|
-3, -3, -3, -3, -2, -2, -2, -2,
|
|
-2, -1, -1, -1, -1, 0, 0, 0,
|
|
0, 0, 0, 1, 1, 1, 1, 1,
|
|
1, 2, 2, 2, 2, 2, 2, 2,
|
|
3, 3, 3, 3, 3, 3, 3, 4,
|
|
4, 4, 4, 4, 4, 4, 4, 5,
|
|
5, 5, 5, 5, 5, 5, 5, 5,
|
|
6, 6, 6, 6, 6, 6, 6, 6,
|
|
6, 7, 7, 7, 7, 7, 7, 7,
|
|
7, 7, 7, 8, 8, 8, 8, 8
|
|
};
|
|
|
|
void snd_opl3_calc_volume(unsigned char *volbyte, int vel,
|
|
struct snd_midi_channel *chan)
|
|
{
|
|
int oldvol, newvol, n;
|
|
int volume;
|
|
|
|
volume = (vel * chan->gm_volume * chan->gm_expression) / (127*127);
|
|
if (volume > 127)
|
|
volume = 127;
|
|
|
|
oldvol = OPL3_TOTAL_LEVEL_MASK - (*volbyte & OPL3_TOTAL_LEVEL_MASK);
|
|
|
|
newvol = opl3_volume_table[volume] + oldvol;
|
|
if (newvol > OPL3_TOTAL_LEVEL_MASK)
|
|
newvol = OPL3_TOTAL_LEVEL_MASK;
|
|
else if (newvol < 0)
|
|
newvol = 0;
|
|
|
|
n = OPL3_TOTAL_LEVEL_MASK - (newvol & OPL3_TOTAL_LEVEL_MASK);
|
|
|
|
*volbyte = (*volbyte & OPL3_KSL_MASK) | (n & OPL3_TOTAL_LEVEL_MASK);
|
|
}
|
|
|
|
/*
|
|
* Converts the note frequency to block and fnum values for the FM chip
|
|
*/
|
|
static const short opl3_note_table[16] =
|
|
{
|
|
305, 323, /* for pitch bending, -2 semitones */
|
|
343, 363, 385, 408, 432, 458, 485, 514, 544, 577, 611, 647,
|
|
686, 726 /* for pitch bending, +2 semitones */
|
|
};
|
|
|
|
static void snd_opl3_calc_pitch(unsigned char *fnum, unsigned char *blocknum,
|
|
int note, struct snd_midi_channel *chan)
|
|
{
|
|
int block = ((note / 12) & 0x07) - 1;
|
|
int idx = (note % 12) + 2;
|
|
int freq;
|
|
|
|
if (chan->midi_pitchbend) {
|
|
int pitchbend = chan->midi_pitchbend;
|
|
int segment;
|
|
|
|
if (pitchbend < -0x2000)
|
|
pitchbend = -0x2000;
|
|
if (pitchbend > 0x1FFF)
|
|
pitchbend = 0x1FFF;
|
|
|
|
segment = pitchbend / 0x1000;
|
|
freq = opl3_note_table[idx+segment];
|
|
freq += ((opl3_note_table[idx+segment+1] - freq) *
|
|
(pitchbend % 0x1000)) / 0x1000;
|
|
} else {
|
|
freq = opl3_note_table[idx];
|
|
}
|
|
|
|
*fnum = (unsigned char) freq;
|
|
*blocknum = ((freq >> 8) & OPL3_FNUM_HIGH_MASK) |
|
|
((block << 2) & OPL3_BLOCKNUM_MASK);
|
|
}
|
|
|
|
|
|
#ifdef DEBUG_ALLOC
|
|
static void debug_alloc(struct snd_opl3 *opl3, char *s, int voice)
|
|
{
|
|
int i;
|
|
const char *str = "x.24";
|
|
char buf[MAX_OPL3_VOICES + 1];
|
|
|
|
for (i = 0; i < opl3->max_voices; i++)
|
|
buf[i] = str[opl3->voices[i].state + 1];
|
|
buf[i] = 0;
|
|
dev_dbg(opl3->card->dev, "time %.5i: %s [%.2i]: %s\n",
|
|
opl3->use_time, s, voice, buf);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Get a FM voice (channel) to play a note on.
|
|
*/
|
|
static int opl3_get_voice(struct snd_opl3 *opl3, int instr_4op,
|
|
struct snd_midi_channel *chan) {
|
|
int chan_4op_1; /* first voice for 4op instrument */
|
|
int chan_4op_2; /* second voice for 4op instrument */
|
|
|
|
struct snd_opl3_voice *vp, *vp2;
|
|
unsigned int voice_time;
|
|
int i;
|
|
|
|
#ifdef DEBUG_ALLOC
|
|
char *alloc_type[3] = { "FREE ", "CHEAP ", "EXPENSIVE" };
|
|
#endif
|
|
|
|
/* This is our "allocation cost" table */
|
|
enum {
|
|
FREE = 0, CHEAP, EXPENSIVE, END
|
|
};
|
|
|
|
/* Keeps track of what we are finding */
|
|
struct best {
|
|
unsigned int time;
|
|
int voice;
|
|
} best[END];
|
|
struct best *bp;
|
|
|
|
for (i = 0; i < END; i++) {
|
|
best[i].time = (unsigned int)(-1); /* XXX MAX_?INT really */
|
|
best[i].voice = -1;
|
|
}
|
|
|
|
/* Look through all the channels for the most suitable. */
|
|
for (i = 0; i < opl3->max_voices; i++) {
|
|
vp = &opl3->voices[i];
|
|
|
|
if (vp->state == SNDRV_OPL3_ST_NOT_AVAIL)
|
|
/* skip unavailable channels, allocated by
|
|
drum voices or by bounded 4op voices) */
|
|
continue;
|
|
|
|
voice_time = vp->time;
|
|
bp = best;
|
|
|
|
chan_4op_1 = ((i < 3) || (i > 8 && i < 12));
|
|
chan_4op_2 = ((i > 2 && i < 6) || (i > 11 && i < 15));
|
|
if (instr_4op) {
|
|
/* allocate 4op voice */
|
|
/* skip channels unavailable to 4op instrument */
|
|
if (!chan_4op_1)
|
|
continue;
|
|
|
|
if (vp->state)
|
|
/* kill one voice, CHEAP */
|
|
bp++;
|
|
/* get state of bounded 2op channel
|
|
to be allocated for 4op instrument */
|
|
vp2 = &opl3->voices[i + 3];
|
|
if (vp2->state == SNDRV_OPL3_ST_ON_2OP) {
|
|
/* kill two voices, EXPENSIVE */
|
|
bp++;
|
|
voice_time = max(voice_time, vp2->time);
|
|
}
|
|
} else {
|
|
/* allocate 2op voice */
|
|
if ((chan_4op_1) || (chan_4op_2))
|
|
/* use bounded channels for 2op, CHEAP */
|
|
bp++;
|
|
else if (vp->state)
|
|
/* kill one voice on 2op channel, CHEAP */
|
|
bp++;
|
|
/* raise kill cost to EXPENSIVE for all channels */
|
|
if (vp->state)
|
|
bp++;
|
|
}
|
|
if (voice_time < bp->time) {
|
|
bp->time = voice_time;
|
|
bp->voice = i;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < END; i++) {
|
|
if (best[i].voice >= 0) {
|
|
#ifdef DEBUG_ALLOC
|
|
dev_dbg(opl3->card->dev,
|
|
"%s %iop allocation on voice %i\n",
|
|
alloc_type[i], instr_4op ? 4 : 2,
|
|
best[i].voice);
|
|
#endif
|
|
return best[i].voice;
|
|
}
|
|
}
|
|
/* not found */
|
|
return -1;
|
|
}
|
|
|
|
/* ------------------------------ */
|
|
|
|
/*
|
|
* System timer interrupt function
|
|
*/
|
|
void snd_opl3_timer_func(struct timer_list *t)
|
|
{
|
|
|
|
struct snd_opl3 *opl3 = from_timer(opl3, t, tlist);
|
|
unsigned long flags;
|
|
int again = 0;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&opl3->voice_lock, flags);
|
|
for (i = 0; i < opl3->max_voices; i++) {
|
|
struct snd_opl3_voice *vp = &opl3->voices[i];
|
|
if (vp->state > 0 && vp->note_off_check) {
|
|
if (vp->note_off == jiffies)
|
|
snd_opl3_note_off_unsafe(opl3, vp->note, 0,
|
|
vp->chan);
|
|
else
|
|
again++;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
|
|
spin_lock_irqsave(&opl3->sys_timer_lock, flags);
|
|
if (again)
|
|
mod_timer(&opl3->tlist, jiffies + 1); /* invoke again */
|
|
else
|
|
opl3->sys_timer_status = 0;
|
|
spin_unlock_irqrestore(&opl3->sys_timer_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Start system timer
|
|
*/
|
|
static void snd_opl3_start_timer(struct snd_opl3 *opl3)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&opl3->sys_timer_lock, flags);
|
|
if (! opl3->sys_timer_status) {
|
|
mod_timer(&opl3->tlist, jiffies + 1);
|
|
opl3->sys_timer_status = 1;
|
|
}
|
|
spin_unlock_irqrestore(&opl3->sys_timer_lock, flags);
|
|
}
|
|
|
|
/* ------------------------------ */
|
|
|
|
|
|
static const int snd_opl3_oss_map[MAX_OPL3_VOICES] = {
|
|
0, 1, 2, 9, 10, 11, 6, 7, 8, 15, 16, 17, 3, 4 ,5, 12, 13, 14
|
|
};
|
|
|
|
/*
|
|
* Start a note.
|
|
*/
|
|
void snd_opl3_note_on(void *p, int note, int vel, struct snd_midi_channel *chan)
|
|
{
|
|
struct snd_opl3 *opl3;
|
|
int instr_4op;
|
|
|
|
int voice;
|
|
struct snd_opl3_voice *vp, *vp2;
|
|
unsigned short connect_mask;
|
|
unsigned char connection;
|
|
unsigned char vol_op[4];
|
|
|
|
int extra_prg = 0;
|
|
|
|
unsigned short reg_side;
|
|
unsigned char op_offset;
|
|
unsigned char voice_offset;
|
|
unsigned short opl3_reg;
|
|
unsigned char reg_val;
|
|
unsigned char prg, bank;
|
|
|
|
int key = note;
|
|
unsigned char fnum, blocknum;
|
|
int i;
|
|
|
|
struct fm_patch *patch;
|
|
struct fm_instrument *fm;
|
|
unsigned long flags;
|
|
|
|
opl3 = p;
|
|
|
|
opl3_dbg(opl3, "Note on, ch %i, inst %i, note %i, vel %i\n",
|
|
chan->number, chan->midi_program, note, vel);
|
|
|
|
/* in SYNTH mode, application takes care of voices */
|
|
/* in SEQ mode, drum voice numbers are notes on drum channel */
|
|
if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
|
|
if (chan->drum_channel) {
|
|
/* percussion instruments are located in bank 128 */
|
|
bank = 128;
|
|
prg = note;
|
|
} else {
|
|
bank = chan->gm_bank_select;
|
|
prg = chan->midi_program;
|
|
}
|
|
} else {
|
|
/* Prepare for OSS mode */
|
|
if (chan->number >= MAX_OPL3_VOICES)
|
|
return;
|
|
|
|
/* OSS instruments are located in bank 127 */
|
|
bank = 127;
|
|
prg = chan->midi_program;
|
|
}
|
|
|
|
spin_lock_irqsave(&opl3->voice_lock, flags);
|
|
|
|
if (use_internal_drums) {
|
|
snd_opl3_drum_switch(opl3, note, vel, 1, chan);
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
return;
|
|
}
|
|
|
|
__extra_prg:
|
|
patch = snd_opl3_find_patch(opl3, prg, bank, 0);
|
|
if (!patch) {
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
return;
|
|
}
|
|
|
|
fm = &patch->inst;
|
|
switch (patch->type) {
|
|
case FM_PATCH_OPL2:
|
|
instr_4op = 0;
|
|
break;
|
|
case FM_PATCH_OPL3:
|
|
if (opl3->hardware >= OPL3_HW_OPL3) {
|
|
instr_4op = 1;
|
|
break;
|
|
}
|
|
fallthrough;
|
|
default:
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
return;
|
|
}
|
|
opl3_dbg(opl3, " --> OPL%i instrument: %s\n",
|
|
instr_4op ? 3 : 2, patch->name);
|
|
/* in SYNTH mode, application takes care of voices */
|
|
/* in SEQ mode, allocate voice on free OPL3 channel */
|
|
if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
|
|
voice = opl3_get_voice(opl3, instr_4op, chan);
|
|
} else {
|
|
/* remap OSS voice */
|
|
voice = snd_opl3_oss_map[chan->number];
|
|
}
|
|
|
|
if (voice < 0) {
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (voice < MAX_OPL2_VOICES) {
|
|
/* Left register block for voices 0 .. 8 */
|
|
reg_side = OPL3_LEFT;
|
|
voice_offset = voice;
|
|
connect_mask = (OPL3_LEFT_4OP_0 << voice_offset) & 0x07;
|
|
} else {
|
|
/* Right register block for voices 9 .. 17 */
|
|
reg_side = OPL3_RIGHT;
|
|
voice_offset = voice - MAX_OPL2_VOICES;
|
|
connect_mask = (OPL3_RIGHT_4OP_0 << voice_offset) & 0x38;
|
|
}
|
|
|
|
/* kill voice on channel */
|
|
vp = &opl3->voices[voice];
|
|
if (vp->state > 0) {
|
|
opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset);
|
|
reg_val = vp->keyon_reg & ~OPL3_KEYON_BIT;
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
}
|
|
if (instr_4op) {
|
|
vp2 = &opl3->voices[voice + 3];
|
|
if (vp2->state > 0) {
|
|
opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK +
|
|
voice_offset + 3);
|
|
reg_val = vp->keyon_reg & ~OPL3_KEYON_BIT;
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
}
|
|
}
|
|
|
|
/* set connection register */
|
|
if (instr_4op) {
|
|
if ((opl3->connection_reg ^ connect_mask) & connect_mask) {
|
|
opl3->connection_reg |= connect_mask;
|
|
/* set connection bit */
|
|
opl3_reg = OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT;
|
|
opl3->command(opl3, opl3_reg, opl3->connection_reg);
|
|
}
|
|
} else {
|
|
if ((opl3->connection_reg ^ ~connect_mask) & connect_mask) {
|
|
opl3->connection_reg &= ~connect_mask;
|
|
/* clear connection bit */
|
|
opl3_reg = OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT;
|
|
opl3->command(opl3, opl3_reg, opl3->connection_reg);
|
|
}
|
|
}
|
|
|
|
opl3_dbg(opl3, " --> setting OPL3 connection: 0x%x\n",
|
|
opl3->connection_reg);
|
|
/*
|
|
* calculate volume depending on connection
|
|
* between FM operators (see include/opl3.h)
|
|
*/
|
|
for (i = 0; i < (instr_4op ? 4 : 2); i++)
|
|
vol_op[i] = fm->op[i].ksl_level;
|
|
|
|
connection = fm->feedback_connection[0] & 0x01;
|
|
if (instr_4op) {
|
|
connection <<= 1;
|
|
connection |= fm->feedback_connection[1] & 0x01;
|
|
|
|
snd_opl3_calc_volume(&vol_op[3], vel, chan);
|
|
switch (connection) {
|
|
case 0x03:
|
|
snd_opl3_calc_volume(&vol_op[2], vel, chan);
|
|
fallthrough;
|
|
case 0x02:
|
|
snd_opl3_calc_volume(&vol_op[0], vel, chan);
|
|
break;
|
|
case 0x01:
|
|
snd_opl3_calc_volume(&vol_op[1], vel, chan);
|
|
}
|
|
} else {
|
|
snd_opl3_calc_volume(&vol_op[1], vel, chan);
|
|
if (connection)
|
|
snd_opl3_calc_volume(&vol_op[0], vel, chan);
|
|
}
|
|
|
|
/* Program the FM voice characteristics */
|
|
for (i = 0; i < (instr_4op ? 4 : 2); i++) {
|
|
opl3_dbg(opl3, " --> programming operator %i\n", i);
|
|
op_offset = snd_opl3_regmap[voice_offset][i];
|
|
|
|
/* Set OPL3 AM_VIB register of requested voice/operator */
|
|
reg_val = fm->op[i].am_vib;
|
|
opl3_reg = reg_side | (OPL3_REG_AM_VIB + op_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
|
|
/* Set OPL3 KSL_LEVEL register of requested voice/operator */
|
|
reg_val = vol_op[i];
|
|
opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + op_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
|
|
/* Set OPL3 ATTACK_DECAY register of requested voice/operator */
|
|
reg_val = fm->op[i].attack_decay;
|
|
opl3_reg = reg_side | (OPL3_REG_ATTACK_DECAY + op_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
|
|
/* Set OPL3 SUSTAIN_RELEASE register of requested voice/operator */
|
|
reg_val = fm->op[i].sustain_release;
|
|
opl3_reg = reg_side | (OPL3_REG_SUSTAIN_RELEASE + op_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
|
|
/* Select waveform */
|
|
reg_val = fm->op[i].wave_select;
|
|
opl3_reg = reg_side | (OPL3_REG_WAVE_SELECT + op_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
}
|
|
|
|
/* Set operator feedback and 2op inter-operator connection */
|
|
reg_val = fm->feedback_connection[0];
|
|
/* Set output voice connection */
|
|
reg_val |= OPL3_STEREO_BITS;
|
|
if (chan->gm_pan < 43)
|
|
reg_val &= ~OPL3_VOICE_TO_RIGHT;
|
|
if (chan->gm_pan > 85)
|
|
reg_val &= ~OPL3_VOICE_TO_LEFT;
|
|
opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
|
|
if (instr_4op) {
|
|
/* Set 4op inter-operator connection */
|
|
reg_val = fm->feedback_connection[1] & OPL3_CONNECTION_BIT;
|
|
/* Set output voice connection */
|
|
reg_val |= OPL3_STEREO_BITS;
|
|
if (chan->gm_pan < 43)
|
|
reg_val &= ~OPL3_VOICE_TO_RIGHT;
|
|
if (chan->gm_pan > 85)
|
|
reg_val &= ~OPL3_VOICE_TO_LEFT;
|
|
opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION +
|
|
voice_offset + 3);
|
|
opl3->command(opl3, opl3_reg, reg_val);
|
|
}
|
|
|
|
/*
|
|
* Special treatment of percussion notes for fm:
|
|
* Requested pitch is really program, and pitch for
|
|
* device is whatever was specified in the patch library.
|
|
*/
|
|
if (fm->fix_key)
|
|
note = fm->fix_key;
|
|
/*
|
|
* use transpose if defined in patch library
|
|
*/
|
|
if (fm->trnsps)
|
|
note += (fm->trnsps - 64);
|
|
|
|
snd_opl3_calc_pitch(&fnum, &blocknum, note, chan);
|
|
|
|
/* Set OPL3 FNUM_LOW register of requested voice */
|
|
opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset);
|
|
opl3->command(opl3, opl3_reg, fnum);
|
|
|
|
opl3->voices[voice].keyon_reg = blocknum;
|
|
|
|
/* Set output sound flag */
|
|
blocknum |= OPL3_KEYON_BIT;
|
|
|
|
opl3_dbg(opl3, " --> trigger voice %i\n", voice);
|
|
/* Set OPL3 KEYON_BLOCK register of requested voice */
|
|
opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset);
|
|
opl3->command(opl3, opl3_reg, blocknum);
|
|
|
|
/* kill note after fixed duration (in centiseconds) */
|
|
if (fm->fix_dur) {
|
|
opl3->voices[voice].note_off = jiffies +
|
|
(fm->fix_dur * HZ) / 100;
|
|
snd_opl3_start_timer(opl3);
|
|
opl3->voices[voice].note_off_check = 1;
|
|
} else
|
|
opl3->voices[voice].note_off_check = 0;
|
|
|
|
/* get extra pgm, but avoid possible loops */
|
|
extra_prg = (extra_prg) ? 0 : fm->modes;
|
|
|
|
/* do the bookkeeping */
|
|
vp->time = opl3->use_time++;
|
|
vp->note = key;
|
|
vp->chan = chan;
|
|
|
|
if (instr_4op) {
|
|
vp->state = SNDRV_OPL3_ST_ON_4OP;
|
|
|
|
vp2 = &opl3->voices[voice + 3];
|
|
vp2->time = opl3->use_time++;
|
|
vp2->note = key;
|
|
vp2->chan = chan;
|
|
vp2->state = SNDRV_OPL3_ST_NOT_AVAIL;
|
|
} else {
|
|
if (vp->state == SNDRV_OPL3_ST_ON_4OP) {
|
|
/* 4op killed by 2op, release bounded voice */
|
|
vp2 = &opl3->voices[voice + 3];
|
|
vp2->time = opl3->use_time++;
|
|
vp2->state = SNDRV_OPL3_ST_OFF;
|
|
}
|
|
vp->state = SNDRV_OPL3_ST_ON_2OP;
|
|
}
|
|
|
|
#ifdef DEBUG_ALLOC
|
|
debug_alloc(opl3, "note on ", voice);
|
|
#endif
|
|
|
|
/* allocate extra program if specified in patch library */
|
|
if (extra_prg) {
|
|
if (extra_prg > 128) {
|
|
bank = 128;
|
|
/* percussions start at 35 */
|
|
prg = extra_prg - 128 + 35 - 1;
|
|
} else {
|
|
bank = 0;
|
|
prg = extra_prg - 1;
|
|
}
|
|
opl3_dbg(opl3, " *** allocating extra program\n");
|
|
goto __extra_prg;
|
|
}
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
}
|
|
|
|
static void snd_opl3_kill_voice(struct snd_opl3 *opl3, int voice)
|
|
{
|
|
unsigned short reg_side;
|
|
unsigned char voice_offset;
|
|
unsigned short opl3_reg;
|
|
|
|
struct snd_opl3_voice *vp, *vp2;
|
|
|
|
if (snd_BUG_ON(voice >= MAX_OPL3_VOICES))
|
|
return;
|
|
|
|
vp = &opl3->voices[voice];
|
|
if (voice < MAX_OPL2_VOICES) {
|
|
/* Left register block for voices 0 .. 8 */
|
|
reg_side = OPL3_LEFT;
|
|
voice_offset = voice;
|
|
} else {
|
|
/* Right register block for voices 9 .. 17 */
|
|
reg_side = OPL3_RIGHT;
|
|
voice_offset = voice - MAX_OPL2_VOICES;
|
|
}
|
|
|
|
/* kill voice */
|
|
opl3_dbg(opl3, " --> kill voice %i\n", voice);
|
|
opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset);
|
|
/* clear Key ON bit */
|
|
opl3->command(opl3, opl3_reg, vp->keyon_reg);
|
|
|
|
/* do the bookkeeping */
|
|
vp->time = opl3->use_time++;
|
|
|
|
if (vp->state == SNDRV_OPL3_ST_ON_4OP) {
|
|
vp2 = &opl3->voices[voice + 3];
|
|
|
|
vp2->time = opl3->use_time++;
|
|
vp2->state = SNDRV_OPL3_ST_OFF;
|
|
}
|
|
vp->state = SNDRV_OPL3_ST_OFF;
|
|
#ifdef DEBUG_ALLOC
|
|
debug_alloc(opl3, "note off", voice);
|
|
#endif
|
|
|
|
}
|
|
|
|
/*
|
|
* Release a note in response to a midi note off.
|
|
*/
|
|
static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
|
|
struct snd_midi_channel *chan)
|
|
{
|
|
struct snd_opl3 *opl3;
|
|
|
|
int voice;
|
|
struct snd_opl3_voice *vp;
|
|
|
|
opl3 = p;
|
|
|
|
opl3_dbg(opl3, "Note off, ch %i, inst %i, note %i\n",
|
|
chan->number, chan->midi_program, note);
|
|
|
|
if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
|
|
if (chan->drum_channel && use_internal_drums) {
|
|
snd_opl3_drum_switch(opl3, note, vel, 0, chan);
|
|
return;
|
|
}
|
|
/* this loop will hopefully kill all extra voices, because
|
|
they are grouped by the same channel and note values */
|
|
for (voice = 0; voice < opl3->max_voices; voice++) {
|
|
vp = &opl3->voices[voice];
|
|
if (vp->state > 0 && vp->chan == chan && vp->note == note) {
|
|
snd_opl3_kill_voice(opl3, voice);
|
|
}
|
|
}
|
|
} else {
|
|
/* remap OSS voices */
|
|
if (chan->number < MAX_OPL3_VOICES) {
|
|
voice = snd_opl3_oss_map[chan->number];
|
|
snd_opl3_kill_voice(opl3, voice);
|
|
}
|
|
}
|
|
}
|
|
|
|
void snd_opl3_note_off(void *p, int note, int vel,
|
|
struct snd_midi_channel *chan)
|
|
{
|
|
struct snd_opl3 *opl3 = p;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&opl3->voice_lock, flags);
|
|
snd_opl3_note_off_unsafe(p, note, vel, chan);
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* key pressure change
|
|
*/
|
|
void snd_opl3_key_press(void *p, int note, int vel, struct snd_midi_channel *chan)
|
|
{
|
|
opl3_dbg(p, "Key pressure, ch#: %i, inst#: %i\n",
|
|
chan->number, chan->midi_program);
|
|
}
|
|
|
|
/*
|
|
* terminate note
|
|
*/
|
|
void snd_opl3_terminate_note(void *p, int note, struct snd_midi_channel *chan)
|
|
{
|
|
opl3_dbg(p, "Terminate note, ch#: %i, inst#: %i\n",
|
|
chan->number, chan->midi_program);
|
|
}
|
|
|
|
static void snd_opl3_update_pitch(struct snd_opl3 *opl3, int voice)
|
|
{
|
|
unsigned short reg_side;
|
|
unsigned char voice_offset;
|
|
unsigned short opl3_reg;
|
|
|
|
unsigned char fnum, blocknum;
|
|
|
|
struct snd_opl3_voice *vp;
|
|
|
|
if (snd_BUG_ON(voice >= MAX_OPL3_VOICES))
|
|
return;
|
|
|
|
vp = &opl3->voices[voice];
|
|
if (vp->chan == NULL)
|
|
return; /* not allocated? */
|
|
|
|
if (voice < MAX_OPL2_VOICES) {
|
|
/* Left register block for voices 0 .. 8 */
|
|
reg_side = OPL3_LEFT;
|
|
voice_offset = voice;
|
|
} else {
|
|
/* Right register block for voices 9 .. 17 */
|
|
reg_side = OPL3_RIGHT;
|
|
voice_offset = voice - MAX_OPL2_VOICES;
|
|
}
|
|
|
|
snd_opl3_calc_pitch(&fnum, &blocknum, vp->note, vp->chan);
|
|
|
|
/* Set OPL3 FNUM_LOW register of requested voice */
|
|
opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset);
|
|
opl3->command(opl3, opl3_reg, fnum);
|
|
|
|
vp->keyon_reg = blocknum;
|
|
|
|
/* Set output sound flag */
|
|
blocknum |= OPL3_KEYON_BIT;
|
|
|
|
/* Set OPL3 KEYON_BLOCK register of requested voice */
|
|
opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset);
|
|
opl3->command(opl3, opl3_reg, blocknum);
|
|
|
|
vp->time = opl3->use_time++;
|
|
}
|
|
|
|
/*
|
|
* Update voice pitch controller
|
|
*/
|
|
static void snd_opl3_pitch_ctrl(struct snd_opl3 *opl3, struct snd_midi_channel *chan)
|
|
{
|
|
int voice;
|
|
struct snd_opl3_voice *vp;
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&opl3->voice_lock, flags);
|
|
|
|
if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
|
|
for (voice = 0; voice < opl3->max_voices; voice++) {
|
|
vp = &opl3->voices[voice];
|
|
if (vp->state > 0 && vp->chan == chan) {
|
|
snd_opl3_update_pitch(opl3, voice);
|
|
}
|
|
}
|
|
} else {
|
|
/* remap OSS voices */
|
|
if (chan->number < MAX_OPL3_VOICES) {
|
|
voice = snd_opl3_oss_map[chan->number];
|
|
snd_opl3_update_pitch(opl3, voice);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&opl3->voice_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Deal with a controller type event. This includes all types of
|
|
* control events, not just the midi controllers
|
|
*/
|
|
void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan)
|
|
{
|
|
struct snd_opl3 *opl3;
|
|
|
|
opl3 = p;
|
|
opl3_dbg(opl3, "Controller, TYPE = %i, ch#: %i, inst#: %i\n",
|
|
type, chan->number, chan->midi_program);
|
|
|
|
switch (type) {
|
|
case MIDI_CTL_MSB_MODWHEEL:
|
|
if (chan->control[MIDI_CTL_MSB_MODWHEEL] > 63)
|
|
opl3->drum_reg |= OPL3_VIBRATO_DEPTH;
|
|
else
|
|
opl3->drum_reg &= ~OPL3_VIBRATO_DEPTH;
|
|
opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION,
|
|
opl3->drum_reg);
|
|
break;
|
|
case MIDI_CTL_E2_TREMOLO_DEPTH:
|
|
if (chan->control[MIDI_CTL_E2_TREMOLO_DEPTH] > 63)
|
|
opl3->drum_reg |= OPL3_TREMOLO_DEPTH;
|
|
else
|
|
opl3->drum_reg &= ~OPL3_TREMOLO_DEPTH;
|
|
opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION,
|
|
opl3->drum_reg);
|
|
break;
|
|
case MIDI_CTL_PITCHBEND:
|
|
snd_opl3_pitch_ctrl(opl3, chan);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* NRPN events
|
|
*/
|
|
void snd_opl3_nrpn(void *p, struct snd_midi_channel *chan,
|
|
struct snd_midi_channel_set *chset)
|
|
{
|
|
opl3_dbg(p, "NRPN, ch#: %i, inst#: %i\n",
|
|
chan->number, chan->midi_program);
|
|
}
|
|
|
|
/*
|
|
* receive sysex
|
|
*/
|
|
void snd_opl3_sysex(void *p, unsigned char *buf, int len,
|
|
int parsed, struct snd_midi_channel_set *chset)
|
|
{
|
|
opl3_dbg(p, "SYSEX\n");
|
|
}
|