linux/Documentation/hwmon/mcp3021
Xie Xiaobo 5510e62a66 hwmon: Add MCP3021 ADC driver
Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:20 +01:00

23 lines
751 B
Plaintext

Kernel driver MCP3021
======================
Supported chips:
* Microchip Technology MCP3021
Prefix: 'mcp3021'
Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf
Author: Mingkai Hu
Description
-----------
This driver implements support for the Microchip Technology MCP3021 chip.
The Microchip Technology Inc. MCP3021 is a successive approximation A/D
converter (ADC) with 10-bit resolution.
This device provides one single-ended input with very low power consumption.
Communication to the MCP3021 is performed using a 2-wire I2C compatible
interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are available.
The default I2C device address is 0x4d (contact the Microchip factory for
additional address options).