mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
eeeb77716f
This check is only useful when introducing support for a new RTC in the driver. Cut down the number of strings in th driver. Link: https://lore.kernel.org/r/20230827214649.537095-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
1542 lines
40 KiB
C
1542 lines
40 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* An I2C and SPI driver for the NXP PCF2127/29/31 RTC
|
|
* Copyright 2013 Til-Technologies
|
|
*
|
|
* Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
|
|
*
|
|
* Watchdog and tamper functions
|
|
* Author: Bruno Thomsen <bruno.thomsen@gmail.com>
|
|
*
|
|
* PCF2131 support
|
|
* Author: Hugo Villeneuve <hvilleneuve@dimonoff.com>
|
|
*
|
|
* based on the other drivers in this same directory.
|
|
*
|
|
* Datasheets: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf
|
|
* https://www.nxp.com/docs/en/data-sheet/PCF2131DS.pdf
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
/* Control register 1 */
|
|
#define PCF2127_REG_CTRL1 0x00
|
|
#define PCF2127_BIT_CTRL1_POR_OVRD BIT(3)
|
|
#define PCF2127_BIT_CTRL1_TSF1 BIT(4)
|
|
#define PCF2127_BIT_CTRL1_STOP BIT(5)
|
|
/* Control register 2 */
|
|
#define PCF2127_REG_CTRL2 0x01
|
|
#define PCF2127_BIT_CTRL2_AIE BIT(1)
|
|
#define PCF2127_BIT_CTRL2_TSIE BIT(2)
|
|
#define PCF2127_BIT_CTRL2_AF BIT(4)
|
|
#define PCF2127_BIT_CTRL2_TSF2 BIT(5)
|
|
#define PCF2127_BIT_CTRL2_WDTF BIT(6)
|
|
/* Control register 3 */
|
|
#define PCF2127_REG_CTRL3 0x02
|
|
#define PCF2127_BIT_CTRL3_BLIE BIT(0)
|
|
#define PCF2127_BIT_CTRL3_BIE BIT(1)
|
|
#define PCF2127_BIT_CTRL3_BLF BIT(2)
|
|
#define PCF2127_BIT_CTRL3_BF BIT(3)
|
|
#define PCF2127_BIT_CTRL3_BTSE BIT(4)
|
|
/* Time and date registers */
|
|
#define PCF2127_REG_TIME_BASE 0x03
|
|
#define PCF2127_BIT_SC_OSF BIT(7)
|
|
/* Alarm registers */
|
|
#define PCF2127_REG_ALARM_BASE 0x0A
|
|
#define PCF2127_BIT_ALARM_AE BIT(7)
|
|
/* CLKOUT control register */
|
|
#define PCF2127_REG_CLKOUT 0x0f
|
|
#define PCF2127_BIT_CLKOUT_OTPR BIT(5)
|
|
/* Watchdog registers */
|
|
#define PCF2127_REG_WD_CTL 0x10
|
|
#define PCF2127_BIT_WD_CTL_TF0 BIT(0)
|
|
#define PCF2127_BIT_WD_CTL_TF1 BIT(1)
|
|
#define PCF2127_BIT_WD_CTL_CD0 BIT(6)
|
|
#define PCF2127_BIT_WD_CTL_CD1 BIT(7)
|
|
#define PCF2127_REG_WD_VAL 0x11
|
|
/* Tamper timestamp1 registers */
|
|
#define PCF2127_REG_TS1_BASE 0x12
|
|
#define PCF2127_BIT_TS_CTRL_TSOFF BIT(6)
|
|
#define PCF2127_BIT_TS_CTRL_TSM BIT(7)
|
|
/*
|
|
* RAM registers
|
|
* PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is
|
|
* battery backed and can survive a power outage.
|
|
* PCF2129/31 doesn't have this feature.
|
|
*/
|
|
#define PCF2127_REG_RAM_ADDR_MSB 0x1A
|
|
#define PCF2127_REG_RAM_WRT_CMD 0x1C
|
|
#define PCF2127_REG_RAM_RD_CMD 0x1D
|
|
|
|
/* Watchdog timer value constants */
|
|
#define PCF2127_WD_VAL_STOP 0
|
|
/* PCF2127/29 watchdog timer value constants */
|
|
#define PCF2127_WD_CLOCK_HZ_X1000 1000 /* 1Hz */
|
|
#define PCF2127_WD_MIN_HW_HEARTBEAT_MS 500
|
|
/* PCF2131 watchdog timer value constants */
|
|
#define PCF2131_WD_CLOCK_HZ_X1000 250 /* 1/4Hz */
|
|
#define PCF2131_WD_MIN_HW_HEARTBEAT_MS 4000
|
|
|
|
#define PCF2127_WD_DEFAULT_TIMEOUT_S 60
|
|
|
|
/* Mask for currently enabled interrupts */
|
|
#define PCF2127_CTRL1_IRQ_MASK (PCF2127_BIT_CTRL1_TSF1)
|
|
#define PCF2127_CTRL2_IRQ_MASK ( \
|
|
PCF2127_BIT_CTRL2_AF | \
|
|
PCF2127_BIT_CTRL2_WDTF | \
|
|
PCF2127_BIT_CTRL2_TSF2)
|
|
|
|
#define PCF2127_MAX_TS_SUPPORTED 4
|
|
|
|
/* Control register 4 */
|
|
#define PCF2131_REG_CTRL4 0x03
|
|
#define PCF2131_BIT_CTRL4_TSF4 BIT(4)
|
|
#define PCF2131_BIT_CTRL4_TSF3 BIT(5)
|
|
#define PCF2131_BIT_CTRL4_TSF2 BIT(6)
|
|
#define PCF2131_BIT_CTRL4_TSF1 BIT(7)
|
|
/* Control register 5 */
|
|
#define PCF2131_REG_CTRL5 0x04
|
|
#define PCF2131_BIT_CTRL5_TSIE4 BIT(4)
|
|
#define PCF2131_BIT_CTRL5_TSIE3 BIT(5)
|
|
#define PCF2131_BIT_CTRL5_TSIE2 BIT(6)
|
|
#define PCF2131_BIT_CTRL5_TSIE1 BIT(7)
|
|
/* Software reset register */
|
|
#define PCF2131_REG_SR_RESET 0x05
|
|
#define PCF2131_SR_RESET_READ_PATTERN (BIT(2) | BIT(5))
|
|
#define PCF2131_SR_RESET_CPR_CMD (PCF2131_SR_RESET_READ_PATTERN | BIT(7))
|
|
/* Time and date registers */
|
|
#define PCF2131_REG_TIME_BASE 0x07
|
|
/* Alarm registers */
|
|
#define PCF2131_REG_ALARM_BASE 0x0E
|
|
/* CLKOUT control register */
|
|
#define PCF2131_REG_CLKOUT 0x13
|
|
/* Watchdog registers */
|
|
#define PCF2131_REG_WD_CTL 0x35
|
|
#define PCF2131_REG_WD_VAL 0x36
|
|
/* Tamper timestamp1 registers */
|
|
#define PCF2131_REG_TS1_BASE 0x14
|
|
/* Tamper timestamp2 registers */
|
|
#define PCF2131_REG_TS2_BASE 0x1B
|
|
/* Tamper timestamp3 registers */
|
|
#define PCF2131_REG_TS3_BASE 0x22
|
|
/* Tamper timestamp4 registers */
|
|
#define PCF2131_REG_TS4_BASE 0x29
|
|
/* Interrupt mask registers */
|
|
#define PCF2131_REG_INT_A_MASK1 0x31
|
|
#define PCF2131_REG_INT_A_MASK2 0x32
|
|
#define PCF2131_REG_INT_B_MASK1 0x33
|
|
#define PCF2131_REG_INT_B_MASK2 0x34
|
|
#define PCF2131_BIT_INT_BLIE BIT(0)
|
|
#define PCF2131_BIT_INT_BIE BIT(1)
|
|
#define PCF2131_BIT_INT_AIE BIT(2)
|
|
#define PCF2131_BIT_INT_WD_CD BIT(3)
|
|
#define PCF2131_BIT_INT_SI BIT(4)
|
|
#define PCF2131_BIT_INT_MI BIT(5)
|
|
#define PCF2131_CTRL2_IRQ_MASK ( \
|
|
PCF2127_BIT_CTRL2_AF | \
|
|
PCF2127_BIT_CTRL2_WDTF)
|
|
#define PCF2131_CTRL4_IRQ_MASK ( \
|
|
PCF2131_BIT_CTRL4_TSF4 | \
|
|
PCF2131_BIT_CTRL4_TSF3 | \
|
|
PCF2131_BIT_CTRL4_TSF2 | \
|
|
PCF2131_BIT_CTRL4_TSF1)
|
|
|
|
enum pcf21xx_type {
|
|
PCF2127,
|
|
PCF2129,
|
|
PCF2131,
|
|
PCF21XX_LAST_ID
|
|
};
|
|
|
|
struct pcf21xx_ts_config {
|
|
u8 reg_base; /* Base register to read timestamp values. */
|
|
|
|
/*
|
|
* If the TS input pin is driven to GND, an interrupt can be generated
|
|
* (supported by all variants).
|
|
*/
|
|
u8 gnd_detect_reg; /* Interrupt control register address. */
|
|
u8 gnd_detect_bit; /* Interrupt bit. */
|
|
|
|
/*
|
|
* If the TS input pin is driven to an intermediate level between GND
|
|
* and supply, an interrupt can be generated (optional feature depending
|
|
* on variant).
|
|
*/
|
|
u8 inter_detect_reg; /* Interrupt control register address. */
|
|
u8 inter_detect_bit; /* Interrupt bit. */
|
|
|
|
u8 ie_reg; /* Interrupt enable control register. */
|
|
u8 ie_bit; /* Interrupt enable bit. */
|
|
};
|
|
|
|
struct pcf21xx_config {
|
|
int type; /* IC variant */
|
|
int max_register;
|
|
unsigned int has_nvmem:1;
|
|
unsigned int has_bit_wd_ctl_cd0:1;
|
|
unsigned int wd_val_reg_readable:1; /* If watchdog value register can be read. */
|
|
unsigned int has_int_a_b:1; /* PCF2131 supports two interrupt outputs. */
|
|
u8 reg_time_base; /* Time/date base register. */
|
|
u8 regs_alarm_base; /* Alarm function base registers. */
|
|
u8 reg_wd_ctl; /* Watchdog control register. */
|
|
u8 reg_wd_val; /* Watchdog value register. */
|
|
u8 reg_clkout; /* Clkout register. */
|
|
int wdd_clock_hz_x1000; /* Watchdog clock in Hz multiplicated by 1000 */
|
|
int wdd_min_hw_heartbeat_ms;
|
|
unsigned int ts_count;
|
|
struct pcf21xx_ts_config ts[PCF2127_MAX_TS_SUPPORTED];
|
|
struct attribute_group attribute_group;
|
|
};
|
|
|
|
struct pcf2127 {
|
|
struct rtc_device *rtc;
|
|
struct watchdog_device wdd;
|
|
struct regmap *regmap;
|
|
const struct pcf21xx_config *cfg;
|
|
bool irq_enabled;
|
|
time64_t ts[PCF2127_MAX_TS_SUPPORTED]; /* Timestamp values. */
|
|
bool ts_valid[PCF2127_MAX_TS_SUPPORTED]; /* Timestamp valid indication. */
|
|
};
|
|
|
|
/*
|
|
* In the routines that deal directly with the pcf2127 hardware, we use
|
|
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
|
|
*/
|
|
static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
unsigned char buf[7];
|
|
int ret;
|
|
|
|
/*
|
|
* Avoid reading CTRL2 register as it causes WD_VAL register
|
|
* value to reset to 0 which means watchdog is stopped.
|
|
*/
|
|
ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->reg_time_base,
|
|
buf, sizeof(buf));
|
|
if (ret) {
|
|
dev_err(dev, "%s: read error\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* Clock integrity is not guaranteed when OSF flag is set. */
|
|
if (buf[0] & PCF2127_BIT_SC_OSF) {
|
|
/*
|
|
* no need clear the flag here,
|
|
* it will be cleared once the new date is saved
|
|
*/
|
|
dev_warn(dev,
|
|
"oscillator stop detected, date/time is not reliable\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(dev,
|
|
"%s: raw data is sec=%02x, min=%02x, hr=%02x, "
|
|
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
|
|
__func__, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
|
|
|
|
tm->tm_sec = bcd2bin(buf[0] & 0x7F);
|
|
tm->tm_min = bcd2bin(buf[1] & 0x7F);
|
|
tm->tm_hour = bcd2bin(buf[2] & 0x3F);
|
|
tm->tm_mday = bcd2bin(buf[3] & 0x3F);
|
|
tm->tm_wday = buf[4] & 0x07;
|
|
tm->tm_mon = bcd2bin(buf[5] & 0x1F) - 1;
|
|
tm->tm_year = bcd2bin(buf[6]);
|
|
tm->tm_year += 100;
|
|
|
|
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__func__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
unsigned char buf[7];
|
|
int i = 0, err;
|
|
|
|
dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__func__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
/* hours, minutes and seconds */
|
|
buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */
|
|
buf[i++] = bin2bcd(tm->tm_min);
|
|
buf[i++] = bin2bcd(tm->tm_hour);
|
|
buf[i++] = bin2bcd(tm->tm_mday);
|
|
buf[i++] = tm->tm_wday & 0x07;
|
|
|
|
/* month, 1 - 12 */
|
|
buf[i++] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* year */
|
|
buf[i++] = bin2bcd(tm->tm_year - 100);
|
|
|
|
/* Write access to time registers:
|
|
* PCF2127/29: no special action required.
|
|
* PCF2131: requires setting the STOP and CPR bits. STOP bit needs to
|
|
* be cleared after time registers are updated.
|
|
*/
|
|
if (pcf2127->cfg->type == PCF2131) {
|
|
err = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
|
|
PCF2127_BIT_CTRL1_STOP,
|
|
PCF2127_BIT_CTRL1_STOP);
|
|
if (err) {
|
|
dev_dbg(dev, "setting STOP bit failed\n");
|
|
return err;
|
|
}
|
|
|
|
err = regmap_write(pcf2127->regmap, PCF2131_REG_SR_RESET,
|
|
PCF2131_SR_RESET_CPR_CMD);
|
|
if (err) {
|
|
dev_dbg(dev, "sending CPR cmd failed\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* write time register's data */
|
|
err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->reg_time_base, buf, i);
|
|
if (err) {
|
|
dev_dbg(dev, "%s: err=%d", __func__, err);
|
|
return err;
|
|
}
|
|
|
|
if (pcf2127->cfg->type == PCF2131) {
|
|
/* Clear STOP bit (PCF2131 only) after write is completed. */
|
|
err = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
|
|
PCF2127_BIT_CTRL1_STOP, 0);
|
|
if (err) {
|
|
dev_dbg(dev, "clearing STOP bit failed\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf2127_rtc_ioctl(struct device *dev,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
int val, touser = 0;
|
|
int ret;
|
|
|
|
switch (cmd) {
|
|
case RTC_VL_READ:
|
|
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & PCF2127_BIT_CTRL3_BLF)
|
|
touser |= RTC_VL_BACKUP_LOW;
|
|
|
|
if (val & PCF2127_BIT_CTRL3_BF)
|
|
touser |= RTC_VL_BACKUP_SWITCH;
|
|
|
|
return put_user(touser, (unsigned int __user *)arg);
|
|
|
|
case RTC_VL_CLR:
|
|
return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
|
|
PCF2127_BIT_CTRL3_BF, 0);
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int pcf2127_nvmem_read(void *priv, unsigned int offset,
|
|
void *val, size_t bytes)
|
|
{
|
|
struct pcf2127 *pcf2127 = priv;
|
|
int ret;
|
|
unsigned char offsetbuf[] = { offset >> 8, offset };
|
|
|
|
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
|
|
offsetbuf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD,
|
|
val, bytes);
|
|
}
|
|
|
|
static int pcf2127_nvmem_write(void *priv, unsigned int offset,
|
|
void *val, size_t bytes)
|
|
{
|
|
struct pcf2127 *pcf2127 = priv;
|
|
int ret;
|
|
unsigned char offsetbuf[] = { offset >> 8, offset };
|
|
|
|
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
|
|
offsetbuf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD,
|
|
val, bytes);
|
|
}
|
|
|
|
/* watchdog driver */
|
|
|
|
static int pcf2127_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
int wd_val;
|
|
struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
|
|
|
|
/*
|
|
* Compute counter value of WATCHDG_TIM_VAL to obtain desired period
|
|
* in seconds, depending on the source clock frequency.
|
|
*/
|
|
wd_val = ((wdd->timeout * pcf2127->cfg->wdd_clock_hz_x1000) / 1000) + 1;
|
|
|
|
return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val, wd_val);
|
|
}
|
|
|
|
/*
|
|
* Restart watchdog timer if feature is active.
|
|
*
|
|
* Note: Reading CTRL2 register causes watchdog to stop which is unfortunate,
|
|
* since register also contain control/status flags for other features.
|
|
* Always call this function after reading CTRL2 register.
|
|
*/
|
|
static int pcf2127_wdt_active_ping(struct watchdog_device *wdd)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (watchdog_active(wdd)) {
|
|
ret = pcf2127_wdt_ping(wdd);
|
|
if (ret)
|
|
dev_err(wdd->parent,
|
|
"%s: watchdog restart failed, ret=%d\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pcf2127_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
return pcf2127_wdt_ping(wdd);
|
|
}
|
|
|
|
static int pcf2127_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
|
|
|
|
return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val,
|
|
PCF2127_WD_VAL_STOP);
|
|
}
|
|
|
|
static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int new_timeout)
|
|
{
|
|
dev_dbg(wdd->parent, "new watchdog timeout: %is (old: %is)\n",
|
|
new_timeout, wdd->timeout);
|
|
|
|
wdd->timeout = new_timeout;
|
|
|
|
return pcf2127_wdt_active_ping(wdd);
|
|
}
|
|
|
|
static const struct watchdog_info pcf2127_wdt_info = {
|
|
.identity = "NXP PCF2127/PCF2129 Watchdog",
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
|
|
};
|
|
|
|
static const struct watchdog_ops pcf2127_watchdog_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = pcf2127_wdt_start,
|
|
.stop = pcf2127_wdt_stop,
|
|
.ping = pcf2127_wdt_ping,
|
|
.set_timeout = pcf2127_wdt_set_timeout,
|
|
};
|
|
|
|
/*
|
|
* Compute watchdog period, t, in seconds, from the WATCHDG_TIM_VAL register
|
|
* value, n, and the clock frequency, f1000, in Hz x 1000.
|
|
*
|
|
* The PCF2127/29 datasheet gives t as:
|
|
* t = n / f
|
|
* The PCF2131 datasheet gives t as:
|
|
* t = (n - 1) / f
|
|
* For both variants, the watchdog is triggered when the WATCHDG_TIM_VAL reaches
|
|
* the value 1, and not zero. Consequently, the equation from the PCF2131
|
|
* datasheet seems to be the correct one for both variants.
|
|
*/
|
|
static int pcf2127_watchdog_get_period(int n, int f1000)
|
|
{
|
|
return (1000 * (n - 1)) / f1000;
|
|
}
|
|
|
|
static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
|
|
{
|
|
int ret;
|
|
|
|
if (!IS_ENABLED(CONFIG_WATCHDOG) ||
|
|
!device_property_read_bool(dev, "reset-source"))
|
|
return 0;
|
|
|
|
pcf2127->wdd.parent = dev;
|
|
pcf2127->wdd.info = &pcf2127_wdt_info;
|
|
pcf2127->wdd.ops = &pcf2127_watchdog_ops;
|
|
|
|
pcf2127->wdd.min_timeout =
|
|
pcf2127_watchdog_get_period(
|
|
2, pcf2127->cfg->wdd_clock_hz_x1000);
|
|
pcf2127->wdd.max_timeout =
|
|
pcf2127_watchdog_get_period(
|
|
255, pcf2127->cfg->wdd_clock_hz_x1000);
|
|
pcf2127->wdd.timeout = PCF2127_WD_DEFAULT_TIMEOUT_S;
|
|
|
|
dev_dbg(dev, "%s clock = %d Hz / 1000\n", __func__,
|
|
pcf2127->cfg->wdd_clock_hz_x1000);
|
|
|
|
pcf2127->wdd.min_hw_heartbeat_ms = pcf2127->cfg->wdd_min_hw_heartbeat_ms;
|
|
pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
|
|
|
|
watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
|
|
|
|
/* Test if watchdog timer is started by bootloader */
|
|
if (pcf2127->cfg->wd_val_reg_readable) {
|
|
u32 wdd_timeout;
|
|
|
|
ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_wd_val,
|
|
&wdd_timeout);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (wdd_timeout)
|
|
set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status);
|
|
}
|
|
|
|
return devm_watchdog_register_device(dev, &pcf2127->wdd);
|
|
}
|
|
|
|
/* Alarm */
|
|
static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
u8 buf[5];
|
|
unsigned int ctrl2;
|
|
int ret;
|
|
|
|
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_alarm_base,
|
|
buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
alrm->enabled = ctrl2 & PCF2127_BIT_CTRL2_AIE;
|
|
alrm->pending = ctrl2 & PCF2127_BIT_CTRL2_AF;
|
|
|
|
alrm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
|
|
alrm->time.tm_min = bcd2bin(buf[1] & 0x7F);
|
|
alrm->time.tm_hour = bcd2bin(buf[2] & 0x3F);
|
|
alrm->time.tm_mday = bcd2bin(buf[3] & 0x3F);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf2127_rtc_alarm_irq_enable(struct device *dev, u32 enable)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
|
|
PCF2127_BIT_CTRL2_AIE,
|
|
enable ? PCF2127_BIT_CTRL2_AIE : 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
}
|
|
|
|
static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
uint8_t buf[5];
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
|
|
PCF2127_BIT_CTRL2_AF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
buf[0] = bin2bcd(alrm->time.tm_sec);
|
|
buf[1] = bin2bcd(alrm->time.tm_min);
|
|
buf[2] = bin2bcd(alrm->time.tm_hour);
|
|
buf[3] = bin2bcd(alrm->time.tm_mday);
|
|
buf[4] = PCF2127_BIT_ALARM_AE; /* Do not match on week day */
|
|
|
|
ret = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_alarm_base,
|
|
buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled);
|
|
}
|
|
|
|
/*
|
|
* This function reads one timestamp function data, caller is responsible for
|
|
* calling pcf2127_wdt_active_ping()
|
|
*/
|
|
static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts,
|
|
int ts_id)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
struct rtc_time tm;
|
|
int ret;
|
|
unsigned char data[7];
|
|
|
|
ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->ts[ts_id].reg_base,
|
|
data, sizeof(data));
|
|
if (ret) {
|
|
dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev,
|
|
"%s: raw data is ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
|
|
__func__, data[1], data[2], data[3], data[4], data[5], data[6]);
|
|
|
|
tm.tm_sec = bcd2bin(data[1] & 0x7F);
|
|
tm.tm_min = bcd2bin(data[2] & 0x7F);
|
|
tm.tm_hour = bcd2bin(data[3] & 0x3F);
|
|
tm.tm_mday = bcd2bin(data[4] & 0x3F);
|
|
/* TS_MO register (month) value range: 1-12 */
|
|
tm.tm_mon = bcd2bin(data[5] & 0x1F) - 1;
|
|
tm.tm_year = bcd2bin(data[6]);
|
|
if (tm.tm_year < 70)
|
|
tm.tm_year += 100; /* assume we are in 1970...2069 */
|
|
|
|
ret = rtc_valid_tm(&tm);
|
|
if (ret) {
|
|
dev_err(dev, "Invalid timestamp. ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
*ts = rtc_tm_to_time64(&tm);
|
|
return 0;
|
|
};
|
|
|
|
static void pcf2127_rtc_ts_snapshot(struct device *dev, int ts_id)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (ts_id >= pcf2127->cfg->ts_count)
|
|
return;
|
|
|
|
/* Let userspace read the first timestamp */
|
|
if (pcf2127->ts_valid[ts_id])
|
|
return;
|
|
|
|
ret = pcf2127_rtc_ts_read(dev, &pcf2127->ts[ts_id], ts_id);
|
|
if (!ret)
|
|
pcf2127->ts_valid[ts_id] = true;
|
|
}
|
|
|
|
static irqreturn_t pcf2127_rtc_irq(int irq, void *dev)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
unsigned int ctrl2;
|
|
int ret = 0;
|
|
|
|
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
|
|
if (ret)
|
|
return IRQ_NONE;
|
|
|
|
if (pcf2127->cfg->ts_count == 1) {
|
|
/* PCF2127/29 */
|
|
unsigned int ctrl1;
|
|
|
|
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1);
|
|
if (ret)
|
|
return IRQ_NONE;
|
|
|
|
if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK))
|
|
return IRQ_NONE;
|
|
|
|
if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2)
|
|
pcf2127_rtc_ts_snapshot(dev, 0);
|
|
|
|
if (ctrl1 & PCF2127_CTRL1_IRQ_MASK)
|
|
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1,
|
|
ctrl1 & ~PCF2127_CTRL1_IRQ_MASK);
|
|
|
|
if (ctrl2 & PCF2127_CTRL2_IRQ_MASK)
|
|
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
|
|
ctrl2 & ~PCF2127_CTRL2_IRQ_MASK);
|
|
} else {
|
|
/* PCF2131. */
|
|
unsigned int ctrl4;
|
|
|
|
ret = regmap_read(pcf2127->regmap, PCF2131_REG_CTRL4, &ctrl4);
|
|
if (ret)
|
|
return IRQ_NONE;
|
|
|
|
if (!(ctrl4 & PCF2131_CTRL4_IRQ_MASK || ctrl2 & PCF2131_CTRL2_IRQ_MASK))
|
|
return IRQ_NONE;
|
|
|
|
if (ctrl4 & PCF2131_CTRL4_IRQ_MASK) {
|
|
int i;
|
|
int tsf_bit = PCF2131_BIT_CTRL4_TSF1; /* Start at bit 7. */
|
|
|
|
for (i = 0; i < pcf2127->cfg->ts_count; i++) {
|
|
if (ctrl4 & tsf_bit)
|
|
pcf2127_rtc_ts_snapshot(dev, i);
|
|
|
|
tsf_bit = tsf_bit >> 1;
|
|
}
|
|
|
|
regmap_write(pcf2127->regmap, PCF2131_REG_CTRL4,
|
|
ctrl4 & ~PCF2131_CTRL4_IRQ_MASK);
|
|
}
|
|
|
|
if (ctrl2 & PCF2131_CTRL2_IRQ_MASK)
|
|
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
|
|
ctrl2 & ~PCF2131_CTRL2_IRQ_MASK);
|
|
}
|
|
|
|
if (ctrl2 & PCF2127_BIT_CTRL2_AF)
|
|
rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
|
|
|
|
pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct rtc_class_ops pcf2127_rtc_ops = {
|
|
.ioctl = pcf2127_rtc_ioctl,
|
|
.read_time = pcf2127_rtc_read_time,
|
|
.set_time = pcf2127_rtc_set_time,
|
|
.read_alarm = pcf2127_rtc_read_alarm,
|
|
.set_alarm = pcf2127_rtc_set_alarm,
|
|
.alarm_irq_enable = pcf2127_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
/* sysfs interface */
|
|
|
|
static ssize_t timestamp_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count, int ts_id)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
|
|
int ret;
|
|
|
|
if (ts_id >= pcf2127->cfg->ts_count)
|
|
return 0;
|
|
|
|
if (pcf2127->irq_enabled) {
|
|
pcf2127->ts_valid[ts_id] = false;
|
|
} else {
|
|
/* Always clear GND interrupt bit. */
|
|
ret = regmap_update_bits(pcf2127->regmap,
|
|
pcf2127->cfg->ts[ts_id].gnd_detect_reg,
|
|
pcf2127->cfg->ts[ts_id].gnd_detect_bit,
|
|
0);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "%s: update TS gnd detect ret=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pcf2127->cfg->ts[ts_id].inter_detect_bit) {
|
|
/* Clear intermediate level interrupt bit if supported. */
|
|
ret = regmap_update_bits(pcf2127->regmap,
|
|
pcf2127->cfg->ts[ts_id].inter_detect_reg,
|
|
pcf2127->cfg->ts[ts_id].inter_detect_bit,
|
|
0);
|
|
if (ret) {
|
|
dev_err(dev, "%s: update TS intermediate level detect ret=%d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t timestamp0_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
return timestamp_store(dev, attr, buf, count, 0);
|
|
};
|
|
|
|
static ssize_t timestamp1_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
return timestamp_store(dev, attr, buf, count, 1);
|
|
};
|
|
|
|
static ssize_t timestamp2_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
return timestamp_store(dev, attr, buf, count, 2);
|
|
};
|
|
|
|
static ssize_t timestamp3_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
return timestamp_store(dev, attr, buf, count, 3);
|
|
};
|
|
|
|
static ssize_t timestamp_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf,
|
|
int ts_id)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
|
|
int ret;
|
|
time64_t ts;
|
|
|
|
if (ts_id >= pcf2127->cfg->ts_count)
|
|
return 0;
|
|
|
|
if (pcf2127->irq_enabled) {
|
|
if (!pcf2127->ts_valid[ts_id])
|
|
return 0;
|
|
ts = pcf2127->ts[ts_id];
|
|
} else {
|
|
u8 valid_low = 0;
|
|
u8 valid_inter = 0;
|
|
unsigned int ctrl;
|
|
|
|
/* Check if TS input pin is driven to GND, supported by all
|
|
* variants.
|
|
*/
|
|
ret = regmap_read(pcf2127->regmap,
|
|
pcf2127->cfg->ts[ts_id].gnd_detect_reg,
|
|
&ctrl);
|
|
if (ret)
|
|
return 0;
|
|
|
|
valid_low = ctrl & pcf2127->cfg->ts[ts_id].gnd_detect_bit;
|
|
|
|
if (pcf2127->cfg->ts[ts_id].inter_detect_bit) {
|
|
/* Check if TS input pin is driven to intermediate level
|
|
* between GND and supply, if supported by variant.
|
|
*/
|
|
ret = regmap_read(pcf2127->regmap,
|
|
pcf2127->cfg->ts[ts_id].inter_detect_reg,
|
|
&ctrl);
|
|
if (ret)
|
|
return 0;
|
|
|
|
valid_inter = ctrl & pcf2127->cfg->ts[ts_id].inter_detect_bit;
|
|
}
|
|
|
|
if (!valid_low && !valid_inter)
|
|
return 0;
|
|
|
|
ret = pcf2127_rtc_ts_read(dev->parent, &ts, ts_id);
|
|
if (ret)
|
|
return 0;
|
|
|
|
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return sprintf(buf, "%llu\n", (unsigned long long)ts);
|
|
}
|
|
|
|
static ssize_t timestamp0_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return timestamp_show(dev, attr, buf, 0);
|
|
};
|
|
|
|
static ssize_t timestamp1_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return timestamp_show(dev, attr, buf, 1);
|
|
};
|
|
|
|
static ssize_t timestamp2_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return timestamp_show(dev, attr, buf, 2);
|
|
};
|
|
|
|
static ssize_t timestamp3_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return timestamp_show(dev, attr, buf, 3);
|
|
};
|
|
|
|
static DEVICE_ATTR_RW(timestamp0);
|
|
static DEVICE_ATTR_RW(timestamp1);
|
|
static DEVICE_ATTR_RW(timestamp2);
|
|
static DEVICE_ATTR_RW(timestamp3);
|
|
|
|
static struct attribute *pcf2127_attrs[] = {
|
|
&dev_attr_timestamp0.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute *pcf2131_attrs[] = {
|
|
&dev_attr_timestamp0.attr,
|
|
&dev_attr_timestamp1.attr,
|
|
&dev_attr_timestamp2.attr,
|
|
&dev_attr_timestamp3.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct pcf21xx_config pcf21xx_cfg[] = {
|
|
[PCF2127] = {
|
|
.type = PCF2127,
|
|
.max_register = 0x1d,
|
|
.has_nvmem = 1,
|
|
.has_bit_wd_ctl_cd0 = 1,
|
|
.wd_val_reg_readable = 1,
|
|
.has_int_a_b = 0,
|
|
.reg_time_base = PCF2127_REG_TIME_BASE,
|
|
.regs_alarm_base = PCF2127_REG_ALARM_BASE,
|
|
.reg_wd_ctl = PCF2127_REG_WD_CTL,
|
|
.reg_wd_val = PCF2127_REG_WD_VAL,
|
|
.reg_clkout = PCF2127_REG_CLKOUT,
|
|
.wdd_clock_hz_x1000 = PCF2127_WD_CLOCK_HZ_X1000,
|
|
.wdd_min_hw_heartbeat_ms = PCF2127_WD_MIN_HW_HEARTBEAT_MS,
|
|
.ts_count = 1,
|
|
.ts[0] = {
|
|
.reg_base = PCF2127_REG_TS1_BASE,
|
|
.gnd_detect_reg = PCF2127_REG_CTRL1,
|
|
.gnd_detect_bit = PCF2127_BIT_CTRL1_TSF1,
|
|
.inter_detect_reg = PCF2127_REG_CTRL2,
|
|
.inter_detect_bit = PCF2127_BIT_CTRL2_TSF2,
|
|
.ie_reg = PCF2127_REG_CTRL2,
|
|
.ie_bit = PCF2127_BIT_CTRL2_TSIE,
|
|
},
|
|
.attribute_group = {
|
|
.attrs = pcf2127_attrs,
|
|
},
|
|
},
|
|
[PCF2129] = {
|
|
.type = PCF2129,
|
|
.max_register = 0x19,
|
|
.has_nvmem = 0,
|
|
.has_bit_wd_ctl_cd0 = 0,
|
|
.wd_val_reg_readable = 1,
|
|
.has_int_a_b = 0,
|
|
.reg_time_base = PCF2127_REG_TIME_BASE,
|
|
.regs_alarm_base = PCF2127_REG_ALARM_BASE,
|
|
.reg_wd_ctl = PCF2127_REG_WD_CTL,
|
|
.reg_wd_val = PCF2127_REG_WD_VAL,
|
|
.reg_clkout = PCF2127_REG_CLKOUT,
|
|
.wdd_clock_hz_x1000 = PCF2127_WD_CLOCK_HZ_X1000,
|
|
.wdd_min_hw_heartbeat_ms = PCF2127_WD_MIN_HW_HEARTBEAT_MS,
|
|
.ts_count = 1,
|
|
.ts[0] = {
|
|
.reg_base = PCF2127_REG_TS1_BASE,
|
|
.gnd_detect_reg = PCF2127_REG_CTRL1,
|
|
.gnd_detect_bit = PCF2127_BIT_CTRL1_TSF1,
|
|
.inter_detect_reg = PCF2127_REG_CTRL2,
|
|
.inter_detect_bit = PCF2127_BIT_CTRL2_TSF2,
|
|
.ie_reg = PCF2127_REG_CTRL2,
|
|
.ie_bit = PCF2127_BIT_CTRL2_TSIE,
|
|
},
|
|
.attribute_group = {
|
|
.attrs = pcf2127_attrs,
|
|
},
|
|
},
|
|
[PCF2131] = {
|
|
.type = PCF2131,
|
|
.max_register = 0x36,
|
|
.has_nvmem = 0,
|
|
.has_bit_wd_ctl_cd0 = 0,
|
|
.wd_val_reg_readable = 0,
|
|
.has_int_a_b = 1,
|
|
.reg_time_base = PCF2131_REG_TIME_BASE,
|
|
.regs_alarm_base = PCF2131_REG_ALARM_BASE,
|
|
.reg_wd_ctl = PCF2131_REG_WD_CTL,
|
|
.reg_wd_val = PCF2131_REG_WD_VAL,
|
|
.reg_clkout = PCF2131_REG_CLKOUT,
|
|
.wdd_clock_hz_x1000 = PCF2131_WD_CLOCK_HZ_X1000,
|
|
.wdd_min_hw_heartbeat_ms = PCF2131_WD_MIN_HW_HEARTBEAT_MS,
|
|
.ts_count = 4,
|
|
.ts[0] = {
|
|
.reg_base = PCF2131_REG_TS1_BASE,
|
|
.gnd_detect_reg = PCF2131_REG_CTRL4,
|
|
.gnd_detect_bit = PCF2131_BIT_CTRL4_TSF1,
|
|
.inter_detect_bit = 0,
|
|
.ie_reg = PCF2131_REG_CTRL5,
|
|
.ie_bit = PCF2131_BIT_CTRL5_TSIE1,
|
|
},
|
|
.ts[1] = {
|
|
.reg_base = PCF2131_REG_TS2_BASE,
|
|
.gnd_detect_reg = PCF2131_REG_CTRL4,
|
|
.gnd_detect_bit = PCF2131_BIT_CTRL4_TSF2,
|
|
.inter_detect_bit = 0,
|
|
.ie_reg = PCF2131_REG_CTRL5,
|
|
.ie_bit = PCF2131_BIT_CTRL5_TSIE2,
|
|
},
|
|
.ts[2] = {
|
|
.reg_base = PCF2131_REG_TS3_BASE,
|
|
.gnd_detect_reg = PCF2131_REG_CTRL4,
|
|
.gnd_detect_bit = PCF2131_BIT_CTRL4_TSF3,
|
|
.inter_detect_bit = 0,
|
|
.ie_reg = PCF2131_REG_CTRL5,
|
|
.ie_bit = PCF2131_BIT_CTRL5_TSIE3,
|
|
},
|
|
.ts[3] = {
|
|
.reg_base = PCF2131_REG_TS4_BASE,
|
|
.gnd_detect_reg = PCF2131_REG_CTRL4,
|
|
.gnd_detect_bit = PCF2131_BIT_CTRL4_TSF4,
|
|
.inter_detect_bit = 0,
|
|
.ie_reg = PCF2131_REG_CTRL5,
|
|
.ie_bit = PCF2131_BIT_CTRL5_TSIE4,
|
|
},
|
|
.attribute_group = {
|
|
.attrs = pcf2131_attrs,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Enable timestamp function and corresponding interrupt(s).
|
|
*/
|
|
static int pcf2127_enable_ts(struct device *dev, int ts_id)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (ts_id >= pcf2127->cfg->ts_count) {
|
|
dev_err(dev, "%s: invalid tamper detection ID (%d)\n",
|
|
__func__, ts_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable timestamp function. */
|
|
ret = regmap_update_bits(pcf2127->regmap,
|
|
pcf2127->cfg->ts[ts_id].reg_base,
|
|
PCF2127_BIT_TS_CTRL_TSOFF |
|
|
PCF2127_BIT_TS_CTRL_TSM,
|
|
PCF2127_BIT_TS_CTRL_TSM);
|
|
if (ret) {
|
|
dev_err(dev, "%s: tamper detection config (ts%d_ctrl) failed\n",
|
|
__func__, ts_id);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Enable interrupt generation when TSF timestamp flag is set.
|
|
* Interrupt signals are open-drain outputs and can be left floating if
|
|
* unused.
|
|
*/
|
|
ret = regmap_update_bits(pcf2127->regmap, pcf2127->cfg->ts[ts_id].ie_reg,
|
|
pcf2127->cfg->ts[ts_id].ie_bit,
|
|
pcf2127->cfg->ts[ts_id].ie_bit);
|
|
if (ret) {
|
|
dev_err(dev, "%s: tamper detection TSIE%d config failed\n",
|
|
__func__, ts_id);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Route all interrupt sources to INT A pin. */
|
|
static int pcf2127_configure_interrupt_pins(struct device *dev)
|
|
{
|
|
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* Mask bits need to be cleared to enable corresponding
|
|
* interrupt source.
|
|
*/
|
|
ret = regmap_write(pcf2127->regmap,
|
|
PCF2131_REG_INT_A_MASK1, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(pcf2127->regmap,
|
|
PCF2131_REG_INT_A_MASK2, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pcf2127_probe(struct device *dev, struct regmap *regmap,
|
|
int alarm_irq, const struct pcf21xx_config *config)
|
|
{
|
|
struct pcf2127 *pcf2127;
|
|
int ret = 0;
|
|
unsigned int val;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL);
|
|
if (!pcf2127)
|
|
return -ENOMEM;
|
|
|
|
pcf2127->regmap = regmap;
|
|
pcf2127->cfg = config;
|
|
|
|
dev_set_drvdata(dev, pcf2127);
|
|
|
|
pcf2127->rtc = devm_rtc_allocate_device(dev);
|
|
if (IS_ERR(pcf2127->rtc))
|
|
return PTR_ERR(pcf2127->rtc);
|
|
|
|
pcf2127->rtc->ops = &pcf2127_rtc_ops;
|
|
pcf2127->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
|
|
pcf2127->rtc->range_max = RTC_TIMESTAMP_END_2099;
|
|
pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
|
|
|
|
/*
|
|
* PCF2127/29 do not work correctly when setting alarms at 1s intervals.
|
|
* PCF2131 is ok.
|
|
*/
|
|
if (pcf2127->cfg->type == PCF2127 || pcf2127->cfg->type == PCF2129) {
|
|
set_bit(RTC_FEATURE_ALARM_RES_2S, pcf2127->rtc->features);
|
|
clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf2127->rtc->features);
|
|
}
|
|
|
|
clear_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
|
|
|
|
if (alarm_irq > 0) {
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* If flags = 0, devm_request_threaded_irq() will use IRQ flags
|
|
* obtained from device tree.
|
|
*/
|
|
if (dev_fwnode(dev))
|
|
flags = 0;
|
|
else
|
|
flags = IRQF_TRIGGER_LOW;
|
|
|
|
ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
|
|
pcf2127_rtc_irq,
|
|
flags | IRQF_ONESHOT,
|
|
dev_name(dev), dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request alarm irq\n");
|
|
return ret;
|
|
}
|
|
pcf2127->irq_enabled = true;
|
|
}
|
|
|
|
if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
|
|
device_init_wakeup(dev, true);
|
|
set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
|
|
}
|
|
|
|
if (pcf2127->cfg->has_int_a_b) {
|
|
/* Configure int A/B pins, independently of alarm_irq. */
|
|
ret = pcf2127_configure_interrupt_pins(dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to configure interrupt pins\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (pcf2127->cfg->has_nvmem) {
|
|
struct nvmem_config nvmem_cfg = {
|
|
.priv = pcf2127,
|
|
.reg_read = pcf2127_nvmem_read,
|
|
.reg_write = pcf2127_nvmem_write,
|
|
.size = 512,
|
|
};
|
|
|
|
ret = devm_rtc_nvmem_register(pcf2127->rtc, &nvmem_cfg);
|
|
}
|
|
|
|
/*
|
|
* The "Power-On Reset Override" facility prevents the RTC to do a reset
|
|
* after power on. For normal operation the PORO must be disabled.
|
|
*/
|
|
ret = regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
|
|
PCF2127_BIT_CTRL1_POR_OVRD);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_clkout, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(val & PCF2127_BIT_CLKOUT_OTPR)) {
|
|
ret = regmap_set_bits(pcf2127->regmap, pcf2127->cfg->reg_clkout,
|
|
PCF2127_BIT_CLKOUT_OTPR);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
msleep(100);
|
|
}
|
|
|
|
/*
|
|
* Watchdog timer enabled and reset pin /RST activated when timed out.
|
|
* Select 1Hz clock source for watchdog timer (1/4Hz for PCF2131).
|
|
* Note: Countdown timer disabled and not available.
|
|
* For pca2129, pcf2129 and pcf2131, only bit[7] is for Symbol WD_CD
|
|
* of register watchdg_tim_ctl. The bit[6] is labeled
|
|
* as T. Bits labeled as T must always be written with
|
|
* logic 0.
|
|
*/
|
|
ret = regmap_update_bits(pcf2127->regmap, pcf2127->cfg->reg_wd_ctl,
|
|
PCF2127_BIT_WD_CTL_CD1 |
|
|
PCF2127_BIT_WD_CTL_CD0 |
|
|
PCF2127_BIT_WD_CTL_TF1 |
|
|
PCF2127_BIT_WD_CTL_TF0,
|
|
PCF2127_BIT_WD_CTL_CD1 |
|
|
(pcf2127->cfg->has_bit_wd_ctl_cd0 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
|
|
PCF2127_BIT_WD_CTL_TF1);
|
|
if (ret) {
|
|
dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
pcf2127_watchdog_init(dev, pcf2127);
|
|
|
|
/*
|
|
* Disable battery low/switch-over timestamp and interrupts.
|
|
* Clear battery interrupt flags which can block new trigger events.
|
|
* Note: This is the default chip behaviour but added to ensure
|
|
* correct tamper timestamp and interrupt function.
|
|
*/
|
|
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
|
|
PCF2127_BIT_CTRL3_BTSE |
|
|
PCF2127_BIT_CTRL3_BIE |
|
|
PCF2127_BIT_CTRL3_BLIE, 0);
|
|
if (ret) {
|
|
dev_err(dev, "%s: interrupt config (ctrl3) failed\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Enable timestamp functions 1 to 4.
|
|
*/
|
|
for (int i = 0; i < pcf2127->cfg->ts_count; i++) {
|
|
ret = pcf2127_enable_ts(dev, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = rtc_add_group(pcf2127->rtc, &pcf2127->cfg->attribute_group);
|
|
if (ret) {
|
|
dev_err(dev, "%s: tamper sysfs registering failed\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
return devm_rtc_register_device(pcf2127->rtc);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pcf2127_of_match[] = {
|
|
{ .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] },
|
|
{ .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] },
|
|
{ .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] },
|
|
{ .compatible = "nxp,pcf2131", .data = &pcf21xx_cfg[PCF2131] },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int pcf2127_i2c_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct device *dev = context;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
|
|
ret = i2c_master_send(client, data, count);
|
|
if (ret != count)
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf2127_i2c_gather_write(void *context,
|
|
const void *reg, size_t reg_size,
|
|
const void *val, size_t val_size)
|
|
{
|
|
struct device *dev = context;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
void *buf;
|
|
|
|
if (WARN_ON(reg_size != 1))
|
|
return -EINVAL;
|
|
|
|
buf = kmalloc(val_size + 1, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
memcpy(buf, reg, 1);
|
|
memcpy(buf + 1, val, val_size);
|
|
|
|
ret = i2c_master_send(client, buf, val_size + 1);
|
|
|
|
kfree(buf);
|
|
|
|
if (ret != val_size + 1)
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size,
|
|
void *val, size_t val_size)
|
|
{
|
|
struct device *dev = context;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int ret;
|
|
|
|
if (WARN_ON(reg_size != 1))
|
|
return -EINVAL;
|
|
|
|
ret = i2c_master_send(client, reg, 1);
|
|
if (ret != 1)
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
ret = i2c_master_recv(client, val, val_size);
|
|
if (ret != val_size)
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The reason we need this custom regmap_bus instead of using regmap_init_i2c()
|
|
* is that the STOP condition is required between set register address and
|
|
* read register data when reading from registers.
|
|
*/
|
|
static const struct regmap_bus pcf2127_i2c_regmap = {
|
|
.write = pcf2127_i2c_write,
|
|
.gather_write = pcf2127_i2c_gather_write,
|
|
.read = pcf2127_i2c_read,
|
|
};
|
|
|
|
static struct i2c_driver pcf2127_i2c_driver;
|
|
|
|
static const struct i2c_device_id pcf2127_i2c_id[] = {
|
|
{ "pcf2127", PCF2127 },
|
|
{ "pcf2129", PCF2129 },
|
|
{ "pca2129", PCF2129 },
|
|
{ "pcf2131", PCF2131 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
|
|
|
|
static int pcf2127_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct regmap *regmap;
|
|
static struct regmap_config config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
const struct pcf21xx_config *variant;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
|
|
return -ENODEV;
|
|
|
|
if (client->dev.of_node) {
|
|
variant = of_device_get_match_data(&client->dev);
|
|
if (!variant)
|
|
return -ENODEV;
|
|
} else {
|
|
enum pcf21xx_type type =
|
|
i2c_match_id(pcf2127_i2c_id, client)->driver_data;
|
|
|
|
if (type >= PCF21XX_LAST_ID)
|
|
return -ENODEV;
|
|
variant = &pcf21xx_cfg[type];
|
|
}
|
|
|
|
config.max_register = variant->max_register,
|
|
|
|
regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
|
|
&client->dev, &config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
|
|
__func__, PTR_ERR(regmap));
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
return pcf2127_probe(&client->dev, regmap, client->irq, variant);
|
|
}
|
|
|
|
static struct i2c_driver pcf2127_i2c_driver = {
|
|
.driver = {
|
|
.name = "rtc-pcf2127-i2c",
|
|
.of_match_table = of_match_ptr(pcf2127_of_match),
|
|
},
|
|
.probe = pcf2127_i2c_probe,
|
|
.id_table = pcf2127_i2c_id,
|
|
};
|
|
|
|
static int pcf2127_i2c_register_driver(void)
|
|
{
|
|
return i2c_add_driver(&pcf2127_i2c_driver);
|
|
}
|
|
|
|
static void pcf2127_i2c_unregister_driver(void)
|
|
{
|
|
i2c_del_driver(&pcf2127_i2c_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int pcf2127_i2c_register_driver(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void pcf2127_i2c_unregister_driver(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_SPI_MASTER)
|
|
|
|
static struct spi_driver pcf2127_spi_driver;
|
|
static const struct spi_device_id pcf2127_spi_id[];
|
|
|
|
static int pcf2127_spi_probe(struct spi_device *spi)
|
|
{
|
|
static struct regmap_config config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.read_flag_mask = 0xa0,
|
|
.write_flag_mask = 0x20,
|
|
};
|
|
struct regmap *regmap;
|
|
const struct pcf21xx_config *variant;
|
|
|
|
if (spi->dev.of_node) {
|
|
variant = of_device_get_match_data(&spi->dev);
|
|
if (!variant)
|
|
return -ENODEV;
|
|
} else {
|
|
enum pcf21xx_type type = spi_get_device_id(spi)->driver_data;
|
|
|
|
if (type >= PCF21XX_LAST_ID)
|
|
return -ENODEV;
|
|
variant = &pcf21xx_cfg[type];
|
|
}
|
|
|
|
config.max_register = variant->max_register,
|
|
|
|
regmap = devm_regmap_init_spi(spi, &config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
|
|
__func__, PTR_ERR(regmap));
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
return pcf2127_probe(&spi->dev, regmap, spi->irq, variant);
|
|
}
|
|
|
|
static const struct spi_device_id pcf2127_spi_id[] = {
|
|
{ "pcf2127", PCF2127 },
|
|
{ "pcf2129", PCF2129 },
|
|
{ "pca2129", PCF2129 },
|
|
{ "pcf2131", PCF2131 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
|
|
|
|
static struct spi_driver pcf2127_spi_driver = {
|
|
.driver = {
|
|
.name = "rtc-pcf2127-spi",
|
|
.of_match_table = of_match_ptr(pcf2127_of_match),
|
|
},
|
|
.probe = pcf2127_spi_probe,
|
|
.id_table = pcf2127_spi_id,
|
|
};
|
|
|
|
static int pcf2127_spi_register_driver(void)
|
|
{
|
|
return spi_register_driver(&pcf2127_spi_driver);
|
|
}
|
|
|
|
static void pcf2127_spi_unregister_driver(void)
|
|
{
|
|
spi_unregister_driver(&pcf2127_spi_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int pcf2127_spi_register_driver(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void pcf2127_spi_unregister_driver(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init pcf2127_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = pcf2127_i2c_register_driver();
|
|
if (ret) {
|
|
pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = pcf2127_spi_register_driver();
|
|
if (ret) {
|
|
pr_err("Failed to register pcf2127 spi driver: %d\n", ret);
|
|
pcf2127_i2c_unregister_driver();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
module_init(pcf2127_init)
|
|
|
|
static void __exit pcf2127_exit(void)
|
|
{
|
|
pcf2127_spi_unregister_driver();
|
|
pcf2127_i2c_unregister_driver();
|
|
}
|
|
module_exit(pcf2127_exit)
|
|
|
|
MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
|
|
MODULE_DESCRIPTION("NXP PCF2127/29/31 RTC driver");
|
|
MODULE_LICENSE("GPL v2");
|