mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 23:51:39 +00:00
bd4abc2f96
Current code uses num_phys settings to tell the number of entries in phys. Thus remove the NULL terminating entry from phys array which is not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
379 lines
10 KiB
C
379 lines
10 KiB
C
/*
|
|
* Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Kamil Debski <k.debski@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include "phy-samsung-usb2.h"
|
|
|
|
/* Exynos USB PHY registers */
|
|
|
|
/* PHY power control */
|
|
#define EXYNOS_4x12_UPHYPWR 0x0
|
|
|
|
#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY0 ( \
|
|
EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
|
|
EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
|
|
EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
|
|
EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)
|
|
|
|
#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8)
|
|
#define EXYNOS_4x12_UPHYPWR_PHY1 ( \
|
|
EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
|
|
EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
|
|
EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)
|
|
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
|
|
EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
|
|
EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
|
|
EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)
|
|
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14)
|
|
#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
|
|
EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
|
|
EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
|
|
EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)
|
|
|
|
/* PHY clock control */
|
|
#define EXYNOS_4x12_UPHYCLK 0x4
|
|
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0)
|
|
#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0)
|
|
|
|
#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8)
|
|
|
|
#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3)
|
|
#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4)
|
|
#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7)
|
|
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10)
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10)
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10)
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10)
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10)
|
|
#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10)
|
|
|
|
/* PHY reset control */
|
|
#define EXYNOS_4x12_UPHYRST 0x8
|
|
|
|
#define EXYNOS_4x12_URSTCON_PHY0 BIT(0)
|
|
#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1)
|
|
#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2)
|
|
#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3)
|
|
/* The following bit defines are presented in the
|
|
* order taken from the Exynos4412 reference manual.
|
|
*
|
|
* During experiments with the hardware and debugging
|
|
* it was determined that the hardware behaves contrary
|
|
* to the manual.
|
|
*
|
|
* The following bit values were chaned accordingly to the
|
|
* results of real hardware experiments.
|
|
*/
|
|
#define EXYNOS_4x12_URSTCON_PHY1 BIT(4)
|
|
#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6)
|
|
#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5)
|
|
#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7)
|
|
#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10)
|
|
#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9)
|
|
#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8)
|
|
|
|
/* Isolation, configured in the power management unit */
|
|
#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704
|
|
#define EXYNOS_4x12_USB_ISOL_OTG BIT(0)
|
|
#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708
|
|
#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0)
|
|
#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c
|
|
#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0)
|
|
|
|
/* Mode switching SUB Device <-> Host */
|
|
#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c
|
|
#define EXYNOS_4x12_MODE_SWITCH_MASK 1
|
|
#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0
|
|
#define EXYNOS_4x12_MODE_SWITCH_HOST 1
|
|
|
|
enum exynos4x12_phy_id {
|
|
EXYNOS4x12_DEVICE,
|
|
EXYNOS4x12_HOST,
|
|
EXYNOS4x12_HSIC0,
|
|
EXYNOS4x12_HSIC1,
|
|
EXYNOS4x12_NUM_PHYS,
|
|
};
|
|
|
|
/*
|
|
* exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
|
|
* can be written to the phy register.
|
|
*/
|
|
static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
|
|
{
|
|
/* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */
|
|
|
|
switch (rate) {
|
|
case 9600 * KHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
|
|
break;
|
|
case 10 * MHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
|
|
break;
|
|
case 12 * MHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
|
|
break;
|
|
case 19200 * KHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
|
|
break;
|
|
case 20 * MHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
|
|
break;
|
|
case 24 * MHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
|
|
break;
|
|
case 50 * MHZ:
|
|
*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 offset;
|
|
u32 mask;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS4x12_DEVICE:
|
|
case EXYNOS4x12_HOST:
|
|
offset = EXYNOS_4x12_USB_ISOL_OFFSET;
|
|
mask = EXYNOS_4x12_USB_ISOL_OTG;
|
|
break;
|
|
case EXYNOS4x12_HSIC0:
|
|
offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
|
|
mask = EXYNOS_4x12_USB_ISOL_HSIC0;
|
|
break;
|
|
case EXYNOS4x12_HSIC1:
|
|
offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
|
|
mask = EXYNOS_4x12_USB_ISOL_HSIC1;
|
|
break;
|
|
default:
|
|
return;
|
|
};
|
|
|
|
regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
|
|
}
|
|
|
|
static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 clk;
|
|
|
|
clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
|
|
clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;
|
|
|
|
if (drv->cfg->has_refclk_sel)
|
|
clk = EXYNOS_3250_UPHYCLK_REFCLKSEL;
|
|
|
|
clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
|
|
clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON;
|
|
writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
|
|
}
|
|
|
|
static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 rstbits = 0;
|
|
u32 phypwr = 0;
|
|
u32 rst;
|
|
u32 pwr;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS4x12_DEVICE:
|
|
phypwr = EXYNOS_4x12_UPHYPWR_PHY0;
|
|
rstbits = EXYNOS_4x12_URSTCON_PHY0;
|
|
break;
|
|
case EXYNOS4x12_HOST:
|
|
phypwr = EXYNOS_4x12_UPHYPWR_PHY1;
|
|
rstbits = EXYNOS_4x12_URSTCON_HOST_PHY |
|
|
EXYNOS_4x12_URSTCON_PHY1 |
|
|
EXYNOS_4x12_URSTCON_HOST_LINK_P0;
|
|
break;
|
|
case EXYNOS4x12_HSIC0:
|
|
phypwr = EXYNOS_4x12_UPHYPWR_HSIC0;
|
|
rstbits = EXYNOS_4x12_URSTCON_HSIC0 |
|
|
EXYNOS_4x12_URSTCON_HOST_LINK_P1;
|
|
break;
|
|
case EXYNOS4x12_HSIC1:
|
|
phypwr = EXYNOS_4x12_UPHYPWR_HSIC1;
|
|
rstbits = EXYNOS_4x12_URSTCON_HSIC1 |
|
|
EXYNOS_4x12_URSTCON_HOST_LINK_P1;
|
|
break;
|
|
};
|
|
|
|
if (on) {
|
|
pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
|
|
pwr &= ~phypwr;
|
|
writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
|
|
|
|
rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
|
|
rst |= rstbits;
|
|
writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
|
|
udelay(10);
|
|
rst &= ~rstbits;
|
|
writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
|
|
/* The following delay is necessary for the reset sequence to be
|
|
* completed */
|
|
udelay(80);
|
|
} else {
|
|
pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
|
|
pwr |= phypwr;
|
|
writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
|
|
}
|
|
}
|
|
|
|
static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
if (inst->int_cnt++ > 0)
|
|
return;
|
|
|
|
exynos4x12_setup_clk(inst);
|
|
exynos4x12_isol(inst, 0);
|
|
exynos4x12_phy_pwr(inst, 1);
|
|
}
|
|
|
|
static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
|
|
if (inst->ext_cnt++ > 0)
|
|
return 0;
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_HOST) {
|
|
regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
|
|
EXYNOS_4x12_MODE_SWITCH_MASK,
|
|
EXYNOS_4x12_MODE_SWITCH_HOST);
|
|
exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
|
|
}
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
|
|
regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
|
|
EXYNOS_4x12_MODE_SWITCH_MASK,
|
|
EXYNOS_4x12_MODE_SWITCH_DEVICE);
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
|
|
inst->cfg->id == EXYNOS4x12_HSIC1) {
|
|
exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
|
|
exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]);
|
|
}
|
|
|
|
exynos4x12_power_on_int(inst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
if (inst->int_cnt-- > 1)
|
|
return;
|
|
|
|
exynos4x12_isol(inst, 1);
|
|
exynos4x12_phy_pwr(inst, 0);
|
|
}
|
|
|
|
static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
|
|
if (inst->ext_cnt-- > 1)
|
|
return 0;
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
|
|
regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
|
|
EXYNOS_4x12_MODE_SWITCH_MASK,
|
|
EXYNOS_4x12_MODE_SWITCH_HOST);
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_HOST)
|
|
exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
|
|
|
|
if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
|
|
inst->cfg->id == EXYNOS4x12_HSIC1) {
|
|
exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
|
|
exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]);
|
|
}
|
|
|
|
exynos4x12_power_off_int(inst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
|
|
{
|
|
.label = "device",
|
|
.id = EXYNOS4x12_DEVICE,
|
|
.power_on = exynos4x12_power_on,
|
|
.power_off = exynos4x12_power_off,
|
|
},
|
|
{
|
|
.label = "host",
|
|
.id = EXYNOS4x12_HOST,
|
|
.power_on = exynos4x12_power_on,
|
|
.power_off = exynos4x12_power_off,
|
|
},
|
|
{
|
|
.label = "hsic0",
|
|
.id = EXYNOS4x12_HSIC0,
|
|
.power_on = exynos4x12_power_on,
|
|
.power_off = exynos4x12_power_off,
|
|
},
|
|
{
|
|
.label = "hsic1",
|
|
.id = EXYNOS4x12_HSIC1,
|
|
.power_on = exynos4x12_power_on,
|
|
.power_off = exynos4x12_power_off,
|
|
},
|
|
};
|
|
|
|
const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = {
|
|
.has_refclk_sel = 1,
|
|
.num_phys = 1,
|
|
.phys = exynos4x12_phys,
|
|
.rate_to_clk = exynos4x12_rate_to_clk,
|
|
};
|
|
|
|
const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
|
|
.has_mode_switch = 1,
|
|
.num_phys = EXYNOS4x12_NUM_PHYS,
|
|
.phys = exynos4x12_phys,
|
|
.rate_to_clk = exynos4x12_rate_to_clk,
|
|
};
|