mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 16:41:58 +00:00
f83918fb5c
IT8783 watchdog works as in IT872x Tested on Adlink cPCI-6520 boards Signed-off-by: Paolo Teti <paolo.teti@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
798 lines
18 KiB
C
798 lines
18 KiB
C
/*
|
|
* Watchdog Timer Driver
|
|
* for ITE IT87xx Environment Control - Low Pin Count Input / Output
|
|
*
|
|
* (c) Copyright 2007 Oliver Schuster <olivers137@aol.com>
|
|
*
|
|
* Based on softdog.c by Alan Cox,
|
|
* 83977f_wdt.c by Jose Goncalves,
|
|
* it87.c by Chris Gauthron, Jean Delvare
|
|
*
|
|
* Data-sheets: Publicly available at the ITE website
|
|
* http://www.ite.com.tw/
|
|
*
|
|
* Support of the watchdog timers, which are available on
|
|
* IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726,
|
|
* IT8728 and IT8783.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
|
|
|
|
#define WATCHDOG_VERSION "1.14"
|
|
#define WATCHDOG_NAME "IT87 WDT"
|
|
#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
|
|
#define WD_MAGIC 'V'
|
|
|
|
/* Defaults for Module Parameter */
|
|
#define DEFAULT_NOGAMEPORT 0
|
|
#define DEFAULT_NOCIR 0
|
|
#define DEFAULT_EXCLUSIVE 1
|
|
#define DEFAULT_TIMEOUT 60
|
|
#define DEFAULT_TESTMODE 0
|
|
#define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT
|
|
|
|
/* IO Ports */
|
|
#define REG 0x2e
|
|
#define VAL 0x2f
|
|
|
|
/* Logical device Numbers LDN */
|
|
#define GPIO 0x07
|
|
#define GAMEPORT 0x09
|
|
#define CIR 0x0a
|
|
|
|
/* Configuration Registers and Functions */
|
|
#define LDNREG 0x07
|
|
#define CHIPID 0x20
|
|
#define CHIPREV 0x22
|
|
#define ACTREG 0x30
|
|
#define BASEREG 0x60
|
|
|
|
/* Chip Id numbers */
|
|
#define NO_DEV_ID 0xffff
|
|
#define IT8702_ID 0x8702
|
|
#define IT8705_ID 0x8705
|
|
#define IT8712_ID 0x8712
|
|
#define IT8716_ID 0x8716
|
|
#define IT8718_ID 0x8718
|
|
#define IT8720_ID 0x8720
|
|
#define IT8721_ID 0x8721
|
|
#define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */
|
|
#define IT8728_ID 0x8728
|
|
#define IT8783_ID 0x8783
|
|
|
|
/* GPIO Configuration Registers LDN=0x07 */
|
|
#define WDTCTRL 0x71
|
|
#define WDTCFG 0x72
|
|
#define WDTVALLSB 0x73
|
|
#define WDTVALMSB 0x74
|
|
|
|
/* GPIO Bits WDTCTRL */
|
|
#define WDT_CIRINT 0x80
|
|
#define WDT_MOUSEINT 0x40
|
|
#define WDT_KYBINT 0x20
|
|
#define WDT_GAMEPORT 0x10 /* not in it8718, it8720, it8721, it8728 */
|
|
#define WDT_FORCE 0x02
|
|
#define WDT_ZERO 0x01
|
|
|
|
/* GPIO Bits WDTCFG */
|
|
#define WDT_TOV1 0x80
|
|
#define WDT_KRST 0x40
|
|
#define WDT_TOVE 0x20
|
|
#define WDT_PWROK 0x10 /* not in it8721 */
|
|
#define WDT_INT_MASK 0x0f
|
|
|
|
/* CIR Configuration Register LDN=0x0a */
|
|
#define CIR_ILS 0x70
|
|
|
|
/* The default Base address is not always available, we use this */
|
|
#define CIR_BASE 0x0208
|
|
|
|
/* CIR Controller */
|
|
#define CIR_DR(b) (b)
|
|
#define CIR_IER(b) (b + 1)
|
|
#define CIR_RCR(b) (b + 2)
|
|
#define CIR_TCR1(b) (b + 3)
|
|
#define CIR_TCR2(b) (b + 4)
|
|
#define CIR_TSR(b) (b + 5)
|
|
#define CIR_RSR(b) (b + 6)
|
|
#define CIR_BDLR(b) (b + 5)
|
|
#define CIR_BDHR(b) (b + 6)
|
|
#define CIR_IIR(b) (b + 7)
|
|
|
|
/* Default Base address of Game port */
|
|
#define GP_BASE_DEFAULT 0x0201
|
|
|
|
/* wdt_status */
|
|
#define WDTS_TIMER_RUN 0
|
|
#define WDTS_DEV_OPEN 1
|
|
#define WDTS_KEEPALIVE 2
|
|
#define WDTS_LOCKED 3
|
|
#define WDTS_USE_GP 4
|
|
#define WDTS_EXPECTED 5
|
|
#define WDTS_USE_CIR 6
|
|
|
|
static unsigned int base, gpact, ciract, max_units, chip_type;
|
|
static unsigned long wdt_status;
|
|
|
|
static int nogameport = DEFAULT_NOGAMEPORT;
|
|
static int nocir = DEFAULT_NOCIR;
|
|
static int exclusive = DEFAULT_EXCLUSIVE;
|
|
static int timeout = DEFAULT_TIMEOUT;
|
|
static int testmode = DEFAULT_TESTMODE;
|
|
static bool nowayout = DEFAULT_NOWAYOUT;
|
|
|
|
module_param(nogameport, int, 0);
|
|
MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default="
|
|
__MODULE_STRING(DEFAULT_NOGAMEPORT));
|
|
module_param(nocir, int, 0);
|
|
MODULE_PARM_DESC(nocir, "Forbid the use of Consumer IR interrupts to reset timer, default="
|
|
__MODULE_STRING(DEFAULT_NOCIR));
|
|
module_param(exclusive, int, 0);
|
|
MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default="
|
|
__MODULE_STRING(DEFAULT_EXCLUSIVE));
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default="
|
|
__MODULE_STRING(DEFAULT_TIMEOUT));
|
|
module_param(testmode, int, 0);
|
|
MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default="
|
|
__MODULE_STRING(DEFAULT_TESTMODE));
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT));
|
|
|
|
/* Superio Chip */
|
|
|
|
static inline int superio_enter(void)
|
|
{
|
|
/*
|
|
* Try to reserve REG and REG + 1 for exclusive access.
|
|
*/
|
|
if (!request_muxed_region(REG, 2, WATCHDOG_NAME))
|
|
return -EBUSY;
|
|
|
|
outb(0x87, REG);
|
|
outb(0x01, REG);
|
|
outb(0x55, REG);
|
|
outb(0x55, REG);
|
|
return 0;
|
|
}
|
|
|
|
static inline void superio_exit(void)
|
|
{
|
|
outb(0x02, REG);
|
|
outb(0x02, VAL);
|
|
release_region(REG, 2);
|
|
}
|
|
|
|
static inline void superio_select(int ldn)
|
|
{
|
|
outb(LDNREG, REG);
|
|
outb(ldn, VAL);
|
|
}
|
|
|
|
static inline int superio_inb(int reg)
|
|
{
|
|
outb(reg, REG);
|
|
return inb(VAL);
|
|
}
|
|
|
|
static inline void superio_outb(int val, int reg)
|
|
{
|
|
outb(reg, REG);
|
|
outb(val, VAL);
|
|
}
|
|
|
|
static inline int superio_inw(int reg)
|
|
{
|
|
int val;
|
|
outb(reg++, REG);
|
|
val = inb(VAL) << 8;
|
|
outb(reg, REG);
|
|
val |= inb(VAL);
|
|
return val;
|
|
}
|
|
|
|
static inline void superio_outw(int val, int reg)
|
|
{
|
|
outb(reg++, REG);
|
|
outb(val >> 8, VAL);
|
|
outb(reg, REG);
|
|
outb(val, VAL);
|
|
}
|
|
|
|
/* Internal function, should be called after superio_select(GPIO) */
|
|
static void wdt_update_timeout(void)
|
|
{
|
|
unsigned char cfg = WDT_KRST;
|
|
int tm = timeout;
|
|
|
|
if (testmode)
|
|
cfg = 0;
|
|
|
|
if (tm <= max_units)
|
|
cfg |= WDT_TOV1;
|
|
else
|
|
tm /= 60;
|
|
|
|
if (chip_type != IT8721_ID)
|
|
cfg |= WDT_PWROK;
|
|
|
|
superio_outb(cfg, WDTCFG);
|
|
superio_outb(tm, WDTVALLSB);
|
|
if (max_units > 255)
|
|
superio_outb(tm>>8, WDTVALMSB);
|
|
}
|
|
|
|
static int wdt_round_time(int t)
|
|
{
|
|
t += 59;
|
|
t -= t % 60;
|
|
return t;
|
|
}
|
|
|
|
/* watchdog timer handling */
|
|
|
|
static void wdt_keepalive(void)
|
|
{
|
|
if (test_bit(WDTS_USE_GP, &wdt_status))
|
|
inb(base);
|
|
else if (test_bit(WDTS_USE_CIR, &wdt_status))
|
|
/* The timer reloads with around 5 msec delay */
|
|
outb(0x55, CIR_DR(base));
|
|
else {
|
|
if (superio_enter())
|
|
return;
|
|
|
|
superio_select(GPIO);
|
|
wdt_update_timeout();
|
|
superio_exit();
|
|
}
|
|
set_bit(WDTS_KEEPALIVE, &wdt_status);
|
|
}
|
|
|
|
static int wdt_start(void)
|
|
{
|
|
int ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(GPIO);
|
|
if (test_bit(WDTS_USE_GP, &wdt_status))
|
|
superio_outb(WDT_GAMEPORT, WDTCTRL);
|
|
else if (test_bit(WDTS_USE_CIR, &wdt_status))
|
|
superio_outb(WDT_CIRINT, WDTCTRL);
|
|
wdt_update_timeout();
|
|
|
|
superio_exit();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_stop(void)
|
|
{
|
|
int ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(GPIO);
|
|
superio_outb(0x00, WDTCTRL);
|
|
superio_outb(WDT_TOV1, WDTCFG);
|
|
superio_outb(0x00, WDTVALLSB);
|
|
if (max_units > 255)
|
|
superio_outb(0x00, WDTVALMSB);
|
|
|
|
superio_exit();
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* wdt_set_timeout - set a new timeout value with watchdog ioctl
|
|
* @t: timeout value in seconds
|
|
*
|
|
* The hardware device has a 8 or 16 bit watchdog timer (depends on
|
|
* chip version) that can be configured to count seconds or minutes.
|
|
*
|
|
* Used within WDIOC_SETTIMEOUT watchdog device ioctl.
|
|
*/
|
|
|
|
static int wdt_set_timeout(int t)
|
|
{
|
|
if (t < 1 || t > max_units * 60)
|
|
return -EINVAL;
|
|
|
|
if (t > max_units)
|
|
timeout = wdt_round_time(t);
|
|
else
|
|
timeout = t;
|
|
|
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
|
|
int ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(GPIO);
|
|
wdt_update_timeout();
|
|
superio_exit();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* wdt_get_status - determines the status supported by watchdog ioctl
|
|
* @status: status returned to user space
|
|
*
|
|
* The status bit of the device does not allow to distinguish
|
|
* between a regular system reset and a watchdog forced reset.
|
|
* But, in test mode it is useful, so it is supported through
|
|
* WDIOC_GETSTATUS watchdog ioctl. Additionally the driver
|
|
* reports the keepalive signal and the acception of the magic.
|
|
*
|
|
* Used within WDIOC_GETSTATUS watchdog device ioctl.
|
|
*/
|
|
|
|
static int wdt_get_status(int *status)
|
|
{
|
|
*status = 0;
|
|
if (testmode) {
|
|
int ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(GPIO);
|
|
if (superio_inb(WDTCTRL) & WDT_ZERO) {
|
|
superio_outb(0x00, WDTCTRL);
|
|
clear_bit(WDTS_TIMER_RUN, &wdt_status);
|
|
*status |= WDIOF_CARDRESET;
|
|
}
|
|
|
|
superio_exit();
|
|
}
|
|
if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status))
|
|
*status |= WDIOF_KEEPALIVEPING;
|
|
if (test_bit(WDTS_EXPECTED, &wdt_status))
|
|
*status |= WDIOF_MAGICCLOSE;
|
|
return 0;
|
|
}
|
|
|
|
/* /dev/watchdog handling */
|
|
|
|
/**
|
|
* wdt_open - watchdog file_operations .open
|
|
* @inode: inode of the device
|
|
* @file: file handle to the device
|
|
*
|
|
* The watchdog timer starts by opening the device.
|
|
*
|
|
* Used within the file operation of the watchdog device.
|
|
*/
|
|
|
|
static int wdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status))
|
|
return -EBUSY;
|
|
if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) {
|
|
int ret;
|
|
if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status))
|
|
__module_get(THIS_MODULE);
|
|
|
|
ret = wdt_start();
|
|
if (ret) {
|
|
clear_bit(WDTS_LOCKED, &wdt_status);
|
|
clear_bit(WDTS_TIMER_RUN, &wdt_status);
|
|
clear_bit(WDTS_DEV_OPEN, &wdt_status);
|
|
return ret;
|
|
}
|
|
}
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
/**
|
|
* wdt_release - watchdog file_operations .release
|
|
* @inode: inode of the device
|
|
* @file: file handle to the device
|
|
*
|
|
* Closing the watchdog device either stops the watchdog timer
|
|
* or in the case, that nowayout is set or the magic character
|
|
* wasn't written, a critical warning about an running watchdog
|
|
* timer is given.
|
|
*
|
|
* Used within the file operation of the watchdog device.
|
|
*/
|
|
|
|
static int wdt_release(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
|
|
if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) {
|
|
int ret = wdt_stop();
|
|
if (ret) {
|
|
/*
|
|
* Stop failed. Just keep the watchdog alive
|
|
* and hope nothing bad happens.
|
|
*/
|
|
set_bit(WDTS_EXPECTED, &wdt_status);
|
|
wdt_keepalive();
|
|
return ret;
|
|
}
|
|
clear_bit(WDTS_TIMER_RUN, &wdt_status);
|
|
} else {
|
|
wdt_keepalive();
|
|
pr_crit("unexpected close, not stopping watchdog!\n");
|
|
}
|
|
}
|
|
clear_bit(WDTS_DEV_OPEN, &wdt_status);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* wdt_write - watchdog file_operations .write
|
|
* @file: file handle to the watchdog
|
|
* @buf: buffer to write
|
|
* @count: count of bytes
|
|
* @ppos: pointer to the position to write. No seeks allowed
|
|
*
|
|
* A write to a watchdog device is defined as a keepalive signal. Any
|
|
* write of data will do, as we don't define content meaning.
|
|
*
|
|
* Used within the file operation of the watchdog device.
|
|
*/
|
|
|
|
static ssize_t wdt_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
if (count) {
|
|
clear_bit(WDTS_EXPECTED, &wdt_status);
|
|
wdt_keepalive();
|
|
}
|
|
if (!nowayout) {
|
|
size_t ofs;
|
|
|
|
/* note: just in case someone wrote the magic character long ago */
|
|
for (ofs = 0; ofs != count; ofs++) {
|
|
char c;
|
|
if (get_user(c, buf + ofs))
|
|
return -EFAULT;
|
|
if (c == WD_MAGIC)
|
|
set_bit(WDTS_EXPECTED, &wdt_status);
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static const struct watchdog_info ident = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
|
|
.firmware_version = 1,
|
|
.identity = WATCHDOG_NAME,
|
|
};
|
|
|
|
/**
|
|
* wdt_ioctl - watchdog file_operations .unlocked_ioctl
|
|
* @file: file handle to the device
|
|
* @cmd: watchdog command
|
|
* @arg: argument pointer
|
|
*
|
|
* The watchdog API defines a common set of functions for all watchdogs
|
|
* according to their available features.
|
|
*
|
|
* Used within the file operation of the watchdog device.
|
|
*/
|
|
|
|
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
int rc = 0, status, new_options, new_timeout;
|
|
union {
|
|
struct watchdog_info __user *ident;
|
|
int __user *i;
|
|
} uarg;
|
|
|
|
uarg.i = (int __user *)arg;
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
return copy_to_user(uarg.ident,
|
|
&ident, sizeof(ident)) ? -EFAULT : 0;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
rc = wdt_get_status(&status);
|
|
if (rc)
|
|
return rc;
|
|
return put_user(status, uarg.i);
|
|
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, uarg.i);
|
|
|
|
case WDIOC_KEEPALIVE:
|
|
wdt_keepalive();
|
|
return 0;
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
if (get_user(new_options, uarg.i))
|
|
return -EFAULT;
|
|
|
|
switch (new_options) {
|
|
case WDIOS_DISABLECARD:
|
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
|
|
rc = wdt_stop();
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
clear_bit(WDTS_TIMER_RUN, &wdt_status);
|
|
return 0;
|
|
|
|
case WDIOS_ENABLECARD:
|
|
if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) {
|
|
rc = wdt_start();
|
|
if (rc) {
|
|
clear_bit(WDTS_TIMER_RUN, &wdt_status);
|
|
return rc;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
default:
|
|
return -EFAULT;
|
|
}
|
|
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_timeout, uarg.i))
|
|
return -EFAULT;
|
|
rc = wdt_set_timeout(new_timeout);
|
|
case WDIOC_GETTIMEOUT:
|
|
if (put_user(timeout, uarg.i))
|
|
return -EFAULT;
|
|
return rc;
|
|
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
}
|
|
|
|
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
|
|
void *unused)
|
|
{
|
|
if (code == SYS_DOWN || code == SYS_HALT)
|
|
wdt_stop();
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static const struct file_operations wdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = wdt_write,
|
|
.unlocked_ioctl = wdt_ioctl,
|
|
.open = wdt_open,
|
|
.release = wdt_release,
|
|
};
|
|
|
|
static struct miscdevice wdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &wdt_fops,
|
|
};
|
|
|
|
static struct notifier_block wdt_notifier = {
|
|
.notifier_call = wdt_notify_sys,
|
|
};
|
|
|
|
static int __init it87_wdt_init(void)
|
|
{
|
|
int rc = 0;
|
|
int try_gameport = !nogameport;
|
|
u8 chip_rev;
|
|
int gp_rreq_fail = 0;
|
|
|
|
wdt_status = 0;
|
|
|
|
rc = superio_enter();
|
|
if (rc)
|
|
return rc;
|
|
|
|
chip_type = superio_inw(CHIPID);
|
|
chip_rev = superio_inb(CHIPREV) & 0x0f;
|
|
superio_exit();
|
|
|
|
switch (chip_type) {
|
|
case IT8702_ID:
|
|
max_units = 255;
|
|
break;
|
|
case IT8712_ID:
|
|
max_units = (chip_rev < 8) ? 255 : 65535;
|
|
break;
|
|
case IT8716_ID:
|
|
case IT8726_ID:
|
|
max_units = 65535;
|
|
break;
|
|
case IT8718_ID:
|
|
case IT8720_ID:
|
|
case IT8721_ID:
|
|
case IT8728_ID:
|
|
case IT8783_ID:
|
|
max_units = 65535;
|
|
try_gameport = 0;
|
|
break;
|
|
case IT8705_ID:
|
|
pr_err("Unsupported Chip found, Chip %04x Revision %02x\n",
|
|
chip_type, chip_rev);
|
|
return -ENODEV;
|
|
case NO_DEV_ID:
|
|
pr_err("no device\n");
|
|
return -ENODEV;
|
|
default:
|
|
pr_err("Unknown Chip found, Chip %04x Revision %04x\n",
|
|
chip_type, chip_rev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = superio_enter();
|
|
if (rc)
|
|
return rc;
|
|
|
|
superio_select(GPIO);
|
|
superio_outb(WDT_TOV1, WDTCFG);
|
|
superio_outb(0x00, WDTCTRL);
|
|
|
|
/* First try to get Gameport support */
|
|
if (try_gameport) {
|
|
superio_select(GAMEPORT);
|
|
base = superio_inw(BASEREG);
|
|
if (!base) {
|
|
base = GP_BASE_DEFAULT;
|
|
superio_outw(base, BASEREG);
|
|
}
|
|
gpact = superio_inb(ACTREG);
|
|
superio_outb(0x01, ACTREG);
|
|
if (request_region(base, 1, WATCHDOG_NAME))
|
|
set_bit(WDTS_USE_GP, &wdt_status);
|
|
else
|
|
gp_rreq_fail = 1;
|
|
}
|
|
|
|
/* If we haven't Gameport support, try to get CIR support */
|
|
if (!nocir && !test_bit(WDTS_USE_GP, &wdt_status)) {
|
|
if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) {
|
|
if (gp_rreq_fail)
|
|
pr_err("I/O Address 0x%04x and 0x%04x already in use\n",
|
|
base, CIR_BASE);
|
|
else
|
|
pr_err("I/O Address 0x%04x already in use\n",
|
|
CIR_BASE);
|
|
rc = -EIO;
|
|
goto err_out;
|
|
}
|
|
base = CIR_BASE;
|
|
|
|
superio_select(CIR);
|
|
superio_outw(base, BASEREG);
|
|
superio_outb(0x00, CIR_ILS);
|
|
ciract = superio_inb(ACTREG);
|
|
superio_outb(0x01, ACTREG);
|
|
if (gp_rreq_fail) {
|
|
superio_select(GAMEPORT);
|
|
superio_outb(gpact, ACTREG);
|
|
}
|
|
set_bit(WDTS_USE_CIR, &wdt_status);
|
|
}
|
|
|
|
if (timeout < 1 || timeout > max_units * 60) {
|
|
timeout = DEFAULT_TIMEOUT;
|
|
pr_warn("Timeout value out of range, use default %d sec\n",
|
|
DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
if (timeout > max_units)
|
|
timeout = wdt_round_time(timeout);
|
|
|
|
rc = register_reboot_notifier(&wdt_notifier);
|
|
if (rc) {
|
|
pr_err("Cannot register reboot notifier (err=%d)\n", rc);
|
|
goto err_out_region;
|
|
}
|
|
|
|
rc = misc_register(&wdt_miscdev);
|
|
if (rc) {
|
|
pr_err("Cannot register miscdev on minor=%d (err=%d)\n",
|
|
wdt_miscdev.minor, rc);
|
|
goto err_out_reboot;
|
|
}
|
|
|
|
/* Initialize CIR to use it as keepalive source */
|
|
if (test_bit(WDTS_USE_CIR, &wdt_status)) {
|
|
outb(0x00, CIR_RCR(base));
|
|
outb(0xc0, CIR_TCR1(base));
|
|
outb(0x5c, CIR_TCR2(base));
|
|
outb(0x10, CIR_IER(base));
|
|
outb(0x00, CIR_BDHR(base));
|
|
outb(0x01, CIR_BDLR(base));
|
|
outb(0x09, CIR_IER(base));
|
|
}
|
|
|
|
pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d nocir=%d)\n",
|
|
chip_type, chip_rev, timeout,
|
|
nowayout, testmode, exclusive, nogameport, nocir);
|
|
|
|
superio_exit();
|
|
return 0;
|
|
|
|
err_out_reboot:
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
err_out_region:
|
|
if (test_bit(WDTS_USE_GP, &wdt_status))
|
|
release_region(base, 1);
|
|
else if (test_bit(WDTS_USE_CIR, &wdt_status)) {
|
|
release_region(base, 8);
|
|
superio_select(CIR);
|
|
superio_outb(ciract, ACTREG);
|
|
}
|
|
err_out:
|
|
if (try_gameport) {
|
|
superio_select(GAMEPORT);
|
|
superio_outb(gpact, ACTREG);
|
|
}
|
|
|
|
superio_exit();
|
|
return rc;
|
|
}
|
|
|
|
static void __exit it87_wdt_exit(void)
|
|
{
|
|
if (superio_enter() == 0) {
|
|
superio_select(GPIO);
|
|
superio_outb(0x00, WDTCTRL);
|
|
superio_outb(0x00, WDTCFG);
|
|
superio_outb(0x00, WDTVALLSB);
|
|
if (max_units > 255)
|
|
superio_outb(0x00, WDTVALMSB);
|
|
if (test_bit(WDTS_USE_GP, &wdt_status)) {
|
|
superio_select(GAMEPORT);
|
|
superio_outb(gpact, ACTREG);
|
|
} else if (test_bit(WDTS_USE_CIR, &wdt_status)) {
|
|
superio_select(CIR);
|
|
superio_outb(ciract, ACTREG);
|
|
}
|
|
superio_exit();
|
|
}
|
|
|
|
misc_deregister(&wdt_miscdev);
|
|
unregister_reboot_notifier(&wdt_notifier);
|
|
|
|
if (test_bit(WDTS_USE_GP, &wdt_status))
|
|
release_region(base, 1);
|
|
else if (test_bit(WDTS_USE_CIR, &wdt_status))
|
|
release_region(base, 8);
|
|
}
|
|
|
|
module_init(it87_wdt_init);
|
|
module_exit(it87_wdt_exit);
|
|
|
|
MODULE_AUTHOR("Oliver Schuster");
|
|
MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O");
|
|
MODULE_LICENSE("GPL");
|