mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 17:41:44 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
1717 lines
50 KiB
C
1717 lines
50 KiB
C
/* winbond-840.c: A Linux PCI network adapter device driver. */
|
||
/*
|
||
Written 1998-2001 by Donald Becker.
|
||
|
||
This software may be used and distributed according to the terms of
|
||
the GNU General Public License (GPL), incorporated herein by reference.
|
||
Drivers based on or derived from this code fall under the GPL and must
|
||
retain the authorship, copyright and license notice. This file is not
|
||
a complete program and may only be used when the entire operating
|
||
system is licensed under the GPL.
|
||
|
||
The author may be reached as becker@scyld.com, or C/O
|
||
Scyld Computing Corporation
|
||
410 Severn Ave., Suite 210
|
||
Annapolis MD 21403
|
||
|
||
Support and updates available at
|
||
http://www.scyld.com/network/drivers.html
|
||
|
||
Do not remove the copyright information.
|
||
Do not change the version information unless an improvement has been made.
|
||
Merely removing my name, as Compex has done in the past, does not count
|
||
as an improvement.
|
||
|
||
Changelog:
|
||
* ported to 2.4
|
||
???
|
||
* spin lock update, memory barriers, new style dma mappings
|
||
limit each tx buffer to < 1024 bytes
|
||
remove DescIntr from Rx descriptors (that's an Tx flag)
|
||
remove next pointer from Tx descriptors
|
||
synchronize tx_q_bytes
|
||
software reset in tx_timeout
|
||
Copyright (C) 2000 Manfred Spraul
|
||
* further cleanups
|
||
power management.
|
||
support for big endian descriptors
|
||
Copyright (C) 2001 Manfred Spraul
|
||
* ethtool support (jgarzik)
|
||
* Replace some MII-related magic numbers with constants (jgarzik)
|
||
|
||
TODO:
|
||
* enable pci_power_off
|
||
* Wake-On-LAN
|
||
*/
|
||
|
||
#define DRV_NAME "winbond-840"
|
||
#define DRV_VERSION "1.01-d"
|
||
#define DRV_RELDATE "Nov-17-2001"
|
||
|
||
|
||
/* Automatically extracted configuration info:
|
||
probe-func: winbond840_probe
|
||
config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840
|
||
|
||
c-help-name: Winbond W89c840 PCI Ethernet support
|
||
c-help-symbol: CONFIG_WINBOND_840
|
||
c-help: This driver is for the Winbond W89c840 chip. It also works with
|
||
c-help: the TX9882 chip on the Compex RL100-ATX board.
|
||
c-help: More specific information and updates are available from
|
||
c-help: http://www.scyld.com/network/drivers.html
|
||
*/
|
||
|
||
/* The user-configurable values.
|
||
These may be modified when a driver module is loaded.*/
|
||
|
||
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
||
static int max_interrupt_work = 20;
|
||
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
|
||
The '840 uses a 64 element hash table based on the Ethernet CRC. */
|
||
static int multicast_filter_limit = 32;
|
||
|
||
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
||
Setting to > 1518 effectively disables this feature. */
|
||
static int rx_copybreak;
|
||
|
||
/* Used to pass the media type, etc.
|
||
Both 'options[]' and 'full_duplex[]' should exist for driver
|
||
interoperability.
|
||
The media type is usually passed in 'options[]'.
|
||
*/
|
||
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
||
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
||
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
||
|
||
/* Operational parameters that are set at compile time. */
|
||
|
||
/* Keep the ring sizes a power of two for compile efficiency.
|
||
The compiler will convert <unsigned>'%'<2^N> into a bit mask.
|
||
Making the Tx ring too large decreases the effectiveness of channel
|
||
bonding and packet priority.
|
||
There are no ill effects from too-large receive rings. */
|
||
#define TX_RING_SIZE 16
|
||
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
|
||
#define TX_QUEUE_LEN_RESTART 5
|
||
#define RX_RING_SIZE 32
|
||
|
||
#define TX_BUFLIMIT (1024-128)
|
||
|
||
/* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
|
||
To avoid overflowing we don't queue again until we have room for a
|
||
full-size packet.
|
||
*/
|
||
#define TX_FIFO_SIZE (2048)
|
||
#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
|
||
|
||
|
||
/* Operational parameters that usually are not changed. */
|
||
/* Time in jiffies before concluding the transmitter is hung. */
|
||
#define TX_TIMEOUT (2*HZ)
|
||
|
||
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
|
||
|
||
/* Include files, designed to support most kernel versions 2.0.0 and later. */
|
||
#include <linux/module.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/string.h>
|
||
#include <linux/timer.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/ioport.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/pci.h>
|
||
#include <linux/netdevice.h>
|
||
#include <linux/etherdevice.h>
|
||
#include <linux/skbuff.h>
|
||
#include <linux/init.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/ethtool.h>
|
||
#include <linux/mii.h>
|
||
#include <linux/rtnetlink.h>
|
||
#include <linux/crc32.h>
|
||
#include <linux/bitops.h>
|
||
#include <asm/uaccess.h>
|
||
#include <asm/processor.h> /* Processor type for cache alignment. */
|
||
#include <asm/io.h>
|
||
#include <asm/irq.h>
|
||
|
||
/* These identify the driver base version and may not be removed. */
|
||
static char version[] __devinitdata =
|
||
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
|
||
KERN_INFO " http://www.scyld.com/network/drivers.html\n";
|
||
|
||
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
|
||
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
|
||
MODULE_LICENSE("GPL");
|
||
MODULE_VERSION(DRV_VERSION);
|
||
|
||
module_param(max_interrupt_work, int, 0);
|
||
module_param(debug, int, 0);
|
||
module_param(rx_copybreak, int, 0);
|
||
module_param(multicast_filter_limit, int, 0);
|
||
module_param_array(options, int, NULL, 0);
|
||
module_param_array(full_duplex, int, NULL, 0);
|
||
MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt");
|
||
MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)");
|
||
MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames");
|
||
MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses");
|
||
MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex");
|
||
MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)");
|
||
|
||
/*
|
||
Theory of Operation
|
||
|
||
I. Board Compatibility
|
||
|
||
This driver is for the Winbond w89c840 chip.
|
||
|
||
II. Board-specific settings
|
||
|
||
None.
|
||
|
||
III. Driver operation
|
||
|
||
This chip is very similar to the Digital 21*4* "Tulip" family. The first
|
||
twelve registers and the descriptor format are nearly identical. Read a
|
||
Tulip manual for operational details.
|
||
|
||
A significant difference is that the multicast filter and station address are
|
||
stored in registers rather than loaded through a pseudo-transmit packet.
|
||
|
||
Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a
|
||
full-sized packet we must use both data buffers in a descriptor. Thus the
|
||
driver uses ring mode where descriptors are implicitly sequential in memory,
|
||
rather than using the second descriptor address as a chain pointer to
|
||
subsequent descriptors.
|
||
|
||
IV. Notes
|
||
|
||
If you are going to almost clone a Tulip, why not go all the way and avoid
|
||
the need for a new driver?
|
||
|
||
IVb. References
|
||
|
||
http://www.scyld.com/expert/100mbps.html
|
||
http://www.scyld.com/expert/NWay.html
|
||
http://www.winbond.com.tw/
|
||
|
||
IVc. Errata
|
||
|
||
A horrible bug exists in the transmit FIFO. Apparently the chip doesn't
|
||
correctly detect a full FIFO, and queuing more than 2048 bytes may result in
|
||
silent data corruption.
|
||
|
||
Test with 'ping -s 10000' on a fast computer.
|
||
|
||
*/
|
||
|
||
|
||
|
||
/*
|
||
PCI probe table.
|
||
*/
|
||
enum pci_id_flags_bits {
|
||
/* Set PCI command register bits before calling probe1(). */
|
||
PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
|
||
/* Read and map the single following PCI BAR. */
|
||
PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
|
||
PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
|
||
};
|
||
enum chip_capability_flags {
|
||
CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,};
|
||
#ifdef USE_IO_OPS
|
||
#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER)
|
||
#else
|
||
#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER)
|
||
#endif
|
||
|
||
static struct pci_device_id w840_pci_tbl[] = {
|
||
{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 },
|
||
{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
|
||
{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
|
||
{ 0, }
|
||
};
|
||
MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
|
||
|
||
struct pci_id_info {
|
||
const char *name;
|
||
struct match_info {
|
||
int pci, pci_mask, subsystem, subsystem_mask;
|
||
int revision, revision_mask; /* Only 8 bits. */
|
||
} id;
|
||
enum pci_id_flags_bits pci_flags;
|
||
int io_size; /* Needed for I/O region check or ioremap(). */
|
||
int drv_flags; /* Driver use, intended as capability flags. */
|
||
};
|
||
static struct pci_id_info pci_id_tbl[] = {
|
||
{"Winbond W89c840", /* Sometime a Level-One switch card. */
|
||
{ 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 },
|
||
W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII},
|
||
{"Winbond W89c840", { 0x08401050, 0xffffffff, },
|
||
W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
|
||
{"Compex RL100-ATX", { 0x201111F6, 0xffffffff,},
|
||
W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
|
||
{NULL,}, /* 0 terminated list. */
|
||
};
|
||
|
||
/* This driver was written to use PCI memory space, however some x86 systems
|
||
work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space
|
||
accesses instead of memory space. */
|
||
|
||
/* Offsets to the Command and Status Registers, "CSRs".
|
||
While similar to the Tulip, these registers are longword aligned.
|
||
Note: It's not useful to define symbolic names for every register bit in
|
||
the device. The name can only partially document the semantics and make
|
||
the driver longer and more difficult to read.
|
||
*/
|
||
enum w840_offsets {
|
||
PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08,
|
||
RxRingPtr=0x0C, TxRingPtr=0x10,
|
||
IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C,
|
||
RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C,
|
||
CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */
|
||
MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40,
|
||
CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
|
||
};
|
||
|
||
/* Bits in the interrupt status/enable registers. */
|
||
/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */
|
||
enum intr_status_bits {
|
||
NormalIntr=0x10000, AbnormalIntr=0x8000,
|
||
IntrPCIErr=0x2000, TimerInt=0x800,
|
||
IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40,
|
||
TxFIFOUnderflow=0x20, RxErrIntr=0x10,
|
||
TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01,
|
||
};
|
||
|
||
/* Bits in the NetworkConfig register. */
|
||
enum rx_mode_bits {
|
||
AcceptErr=0x80, AcceptRunt=0x40,
|
||
AcceptBroadcast=0x20, AcceptMulticast=0x10,
|
||
AcceptAllPhys=0x08, AcceptMyPhys=0x02,
|
||
};
|
||
|
||
enum mii_reg_bits {
|
||
MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000,
|
||
MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000,
|
||
};
|
||
|
||
/* The Tulip Rx and Tx buffer descriptors. */
|
||
struct w840_rx_desc {
|
||
s32 status;
|
||
s32 length;
|
||
u32 buffer1;
|
||
u32 buffer2;
|
||
};
|
||
|
||
struct w840_tx_desc {
|
||
s32 status;
|
||
s32 length;
|
||
u32 buffer1, buffer2;
|
||
};
|
||
|
||
/* Bits in network_desc.status */
|
||
enum desc_status_bits {
|
||
DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000,
|
||
DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000,
|
||
DescIntr=0x80000000,
|
||
};
|
||
|
||
#define MII_CNT 1 /* winbond only supports one MII */
|
||
struct netdev_private {
|
||
struct w840_rx_desc *rx_ring;
|
||
dma_addr_t rx_addr[RX_RING_SIZE];
|
||
struct w840_tx_desc *tx_ring;
|
||
dma_addr_t tx_addr[TX_RING_SIZE];
|
||
dma_addr_t ring_dma_addr;
|
||
/* The addresses of receive-in-place skbuffs. */
|
||
struct sk_buff* rx_skbuff[RX_RING_SIZE];
|
||
/* The saved address of a sent-in-place packet/buffer, for later free(). */
|
||
struct sk_buff* tx_skbuff[TX_RING_SIZE];
|
||
struct net_device_stats stats;
|
||
struct timer_list timer; /* Media monitoring timer. */
|
||
/* Frequently used values: keep some adjacent for cache effect. */
|
||
spinlock_t lock;
|
||
int chip_id, drv_flags;
|
||
struct pci_dev *pci_dev;
|
||
int csr6;
|
||
struct w840_rx_desc *rx_head_desc;
|
||
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
|
||
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
||
unsigned int cur_tx, dirty_tx;
|
||
unsigned int tx_q_bytes;
|
||
unsigned int tx_full; /* The Tx queue is full. */
|
||
/* MII transceiver section. */
|
||
int mii_cnt; /* MII device addresses. */
|
||
unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */
|
||
u32 mii;
|
||
struct mii_if_info mii_if;
|
||
void __iomem *base_addr;
|
||
};
|
||
|
||
static int eeprom_read(void __iomem *ioaddr, int location);
|
||
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
||
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
|
||
static int netdev_open(struct net_device *dev);
|
||
static int update_link(struct net_device *dev);
|
||
static void netdev_timer(unsigned long data);
|
||
static void init_rxtx_rings(struct net_device *dev);
|
||
static void free_rxtx_rings(struct netdev_private *np);
|
||
static void init_registers(struct net_device *dev);
|
||
static void tx_timeout(struct net_device *dev);
|
||
static int alloc_ringdesc(struct net_device *dev);
|
||
static void free_ringdesc(struct netdev_private *np);
|
||
static int start_tx(struct sk_buff *skb, struct net_device *dev);
|
||
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
|
||
static void netdev_error(struct net_device *dev, int intr_status);
|
||
static int netdev_rx(struct net_device *dev);
|
||
static u32 __set_rx_mode(struct net_device *dev);
|
||
static void set_rx_mode(struct net_device *dev);
|
||
static struct net_device_stats *get_stats(struct net_device *dev);
|
||
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
||
static struct ethtool_ops netdev_ethtool_ops;
|
||
static int netdev_close(struct net_device *dev);
|
||
|
||
|
||
|
||
static int __devinit w840_probe1 (struct pci_dev *pdev,
|
||
const struct pci_device_id *ent)
|
||
{
|
||
struct net_device *dev;
|
||
struct netdev_private *np;
|
||
static int find_cnt;
|
||
int chip_idx = ent->driver_data;
|
||
int irq;
|
||
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
|
||
void __iomem *ioaddr;
|
||
int bar = 1;
|
||
|
||
i = pci_enable_device(pdev);
|
||
if (i) return i;
|
||
|
||
pci_set_master(pdev);
|
||
|
||
irq = pdev->irq;
|
||
|
||
if (pci_set_dma_mask(pdev,0xFFFFffff)) {
|
||
printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n",
|
||
pci_name(pdev));
|
||
return -EIO;
|
||
}
|
||
dev = alloc_etherdev(sizeof(*np));
|
||
if (!dev)
|
||
return -ENOMEM;
|
||
SET_MODULE_OWNER(dev);
|
||
SET_NETDEV_DEV(dev, &pdev->dev);
|
||
|
||
if (pci_request_regions(pdev, DRV_NAME))
|
||
goto err_out_netdev;
|
||
#ifdef USE_IO_OPS
|
||
bar = 0;
|
||
#endif
|
||
ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size);
|
||
if (!ioaddr)
|
||
goto err_out_free_res;
|
||
|
||
for (i = 0; i < 3; i++)
|
||
((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i));
|
||
|
||
/* Reset the chip to erase previous misconfiguration.
|
||
No hold time required! */
|
||
iowrite32(0x00000001, ioaddr + PCIBusCfg);
|
||
|
||
dev->base_addr = (unsigned long)ioaddr;
|
||
dev->irq = irq;
|
||
|
||
np = netdev_priv(dev);
|
||
np->pci_dev = pdev;
|
||
np->chip_id = chip_idx;
|
||
np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
|
||
spin_lock_init(&np->lock);
|
||
np->mii_if.dev = dev;
|
||
np->mii_if.mdio_read = mdio_read;
|
||
np->mii_if.mdio_write = mdio_write;
|
||
np->base_addr = ioaddr;
|
||
|
||
pci_set_drvdata(pdev, dev);
|
||
|
||
if (dev->mem_start)
|
||
option = dev->mem_start;
|
||
|
||
/* The lower four bits are the media type. */
|
||
if (option > 0) {
|
||
if (option & 0x200)
|
||
np->mii_if.full_duplex = 1;
|
||
if (option & 15)
|
||
printk(KERN_INFO "%s: ignoring user supplied media type %d",
|
||
dev->name, option & 15);
|
||
}
|
||
if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
|
||
np->mii_if.full_duplex = 1;
|
||
|
||
if (np->mii_if.full_duplex)
|
||
np->mii_if.force_media = 1;
|
||
|
||
/* The chip-specific entries in the device structure. */
|
||
dev->open = &netdev_open;
|
||
dev->hard_start_xmit = &start_tx;
|
||
dev->stop = &netdev_close;
|
||
dev->get_stats = &get_stats;
|
||
dev->set_multicast_list = &set_rx_mode;
|
||
dev->do_ioctl = &netdev_ioctl;
|
||
dev->ethtool_ops = &netdev_ethtool_ops;
|
||
dev->tx_timeout = &tx_timeout;
|
||
dev->watchdog_timeo = TX_TIMEOUT;
|
||
|
||
i = register_netdev(dev);
|
||
if (i)
|
||
goto err_out_cleardev;
|
||
|
||
printk(KERN_INFO "%s: %s at %p, ",
|
||
dev->name, pci_id_tbl[chip_idx].name, ioaddr);
|
||
for (i = 0; i < 5; i++)
|
||
printk("%2.2x:", dev->dev_addr[i]);
|
||
printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
|
||
|
||
if (np->drv_flags & CanHaveMII) {
|
||
int phy, phy_idx = 0;
|
||
for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
|
||
int mii_status = mdio_read(dev, phy, MII_BMSR);
|
||
if (mii_status != 0xffff && mii_status != 0x0000) {
|
||
np->phys[phy_idx++] = phy;
|
||
np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
|
||
np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
|
||
mdio_read(dev, phy, MII_PHYSID2);
|
||
printk(KERN_INFO "%s: MII PHY %8.8xh found at address %d, status "
|
||
"0x%4.4x advertising %4.4x.\n",
|
||
dev->name, np->mii, phy, mii_status, np->mii_if.advertising);
|
||
}
|
||
}
|
||
np->mii_cnt = phy_idx;
|
||
np->mii_if.phy_id = np->phys[0];
|
||
if (phy_idx == 0) {
|
||
printk(KERN_WARNING "%s: MII PHY not found -- this device may "
|
||
"not operate correctly.\n", dev->name);
|
||
}
|
||
}
|
||
|
||
find_cnt++;
|
||
return 0;
|
||
|
||
err_out_cleardev:
|
||
pci_set_drvdata(pdev, NULL);
|
||
pci_iounmap(pdev, ioaddr);
|
||
err_out_free_res:
|
||
pci_release_regions(pdev);
|
||
err_out_netdev:
|
||
free_netdev (dev);
|
||
return -ENODEV;
|
||
}
|
||
|
||
|
||
/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are
|
||
often serial bit streams generated by the host processor.
|
||
The example below is for the common 93c46 EEPROM, 64 16 bit words. */
|
||
|
||
/* Delay between EEPROM clock transitions.
|
||
No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
|
||
a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that
|
||
made udelay() unreliable.
|
||
The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
|
||
depricated.
|
||
*/
|
||
#define eeprom_delay(ee_addr) ioread32(ee_addr)
|
||
|
||
enum EEPROM_Ctrl_Bits {
|
||
EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805,
|
||
EE_ChipSelect=0x801, EE_DataIn=0x08,
|
||
};
|
||
|
||
/* The EEPROM commands include the alway-set leading bit. */
|
||
enum EEPROM_Cmds {
|
||
EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
|
||
};
|
||
|
||
static int eeprom_read(void __iomem *addr, int location)
|
||
{
|
||
int i;
|
||
int retval = 0;
|
||
void __iomem *ee_addr = addr + EECtrl;
|
||
int read_cmd = location | EE_ReadCmd;
|
||
iowrite32(EE_ChipSelect, ee_addr);
|
||
|
||
/* Shift the read command bits out. */
|
||
for (i = 10; i >= 0; i--) {
|
||
short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
|
||
iowrite32(dataval, ee_addr);
|
||
eeprom_delay(ee_addr);
|
||
iowrite32(dataval | EE_ShiftClk, ee_addr);
|
||
eeprom_delay(ee_addr);
|
||
}
|
||
iowrite32(EE_ChipSelect, ee_addr);
|
||
eeprom_delay(ee_addr);
|
||
|
||
for (i = 16; i > 0; i--) {
|
||
iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr);
|
||
eeprom_delay(ee_addr);
|
||
retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0);
|
||
iowrite32(EE_ChipSelect, ee_addr);
|
||
eeprom_delay(ee_addr);
|
||
}
|
||
|
||
/* Terminate the EEPROM access. */
|
||
iowrite32(0, ee_addr);
|
||
return retval;
|
||
}
|
||
|
||
/* MII transceiver control section.
|
||
Read and write the MII registers using software-generated serial
|
||
MDIO protocol. See the MII specifications or DP83840A data sheet
|
||
for details.
|
||
|
||
The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
|
||
met by back-to-back 33Mhz PCI cycles. */
|
||
#define mdio_delay(mdio_addr) ioread32(mdio_addr)
|
||
|
||
/* Set iff a MII transceiver on any interface requires mdio preamble.
|
||
This only set with older transceivers, so the extra
|
||
code size of a per-interface flag is not worthwhile. */
|
||
static char mii_preamble_required = 1;
|
||
|
||
#define MDIO_WRITE0 (MDIO_EnbOutput)
|
||
#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput)
|
||
|
||
/* Generate the preamble required for initial synchronization and
|
||
a few older transceivers. */
|
||
static void mdio_sync(void __iomem *mdio_addr)
|
||
{
|
||
int bits = 32;
|
||
|
||
/* Establish sync by sending at least 32 logic ones. */
|
||
while (--bits >= 0) {
|
||
iowrite32(MDIO_WRITE1, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
}
|
||
}
|
||
|
||
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *mdio_addr = np->base_addr + MIICtrl;
|
||
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
|
||
int i, retval = 0;
|
||
|
||
if (mii_preamble_required)
|
||
mdio_sync(mdio_addr);
|
||
|
||
/* Shift the read command bits out. */
|
||
for (i = 15; i >= 0; i--) {
|
||
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
||
|
||
iowrite32(dataval, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
}
|
||
/* Read the two transition, 16 data, and wire-idle bits. */
|
||
for (i = 20; i > 0; i--) {
|
||
iowrite32(MDIO_EnbIn, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0);
|
||
iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
}
|
||
return (retval>>1) & 0xffff;
|
||
}
|
||
|
||
static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *mdio_addr = np->base_addr + MIICtrl;
|
||
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
|
||
int i;
|
||
|
||
if (location == 4 && phy_id == np->phys[0])
|
||
np->mii_if.advertising = value;
|
||
|
||
if (mii_preamble_required)
|
||
mdio_sync(mdio_addr);
|
||
|
||
/* Shift the command bits out. */
|
||
for (i = 31; i >= 0; i--) {
|
||
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
||
|
||
iowrite32(dataval, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
}
|
||
/* Clear out extra bits. */
|
||
for (i = 2; i > 0; i--) {
|
||
iowrite32(MDIO_EnbIn, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
||
mdio_delay(mdio_addr);
|
||
}
|
||
return;
|
||
}
|
||
|
||
|
||
static int netdev_open(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
int i;
|
||
|
||
iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */
|
||
|
||
netif_device_detach(dev);
|
||
i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
|
||
if (i)
|
||
goto out_err;
|
||
|
||
if (debug > 1)
|
||
printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
|
||
dev->name, dev->irq);
|
||
|
||
if((i=alloc_ringdesc(dev)))
|
||
goto out_err;
|
||
|
||
spin_lock_irq(&np->lock);
|
||
netif_device_attach(dev);
|
||
init_registers(dev);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
netif_start_queue(dev);
|
||
if (debug > 2)
|
||
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
|
||
|
||
/* Set the timer to check for link beat. */
|
||
init_timer(&np->timer);
|
||
np->timer.expires = jiffies + 1*HZ;
|
||
np->timer.data = (unsigned long)dev;
|
||
np->timer.function = &netdev_timer; /* timer handler */
|
||
add_timer(&np->timer);
|
||
return 0;
|
||
out_err:
|
||
netif_device_attach(dev);
|
||
return i;
|
||
}
|
||
|
||
#define MII_DAVICOM_DM9101 0x0181b800
|
||
|
||
static int update_link(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
int duplex, fasteth, result, mii_reg;
|
||
|
||
/* BSMR */
|
||
mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
|
||
|
||
if (mii_reg == 0xffff)
|
||
return np->csr6;
|
||
/* reread: the link status bit is sticky */
|
||
mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
|
||
if (!(mii_reg & 0x4)) {
|
||
if (netif_carrier_ok(dev)) {
|
||
if (debug)
|
||
printk(KERN_INFO "%s: MII #%d reports no link. Disabling watchdog.\n",
|
||
dev->name, np->phys[0]);
|
||
netif_carrier_off(dev);
|
||
}
|
||
return np->csr6;
|
||
}
|
||
if (!netif_carrier_ok(dev)) {
|
||
if (debug)
|
||
printk(KERN_INFO "%s: MII #%d link is back. Enabling watchdog.\n",
|
||
dev->name, np->phys[0]);
|
||
netif_carrier_on(dev);
|
||
}
|
||
|
||
if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
|
||
/* If the link partner doesn't support autonegotiation
|
||
* the MII detects it's abilities with the "parallel detection".
|
||
* Some MIIs update the LPA register to the result of the parallel
|
||
* detection, some don't.
|
||
* The Davicom PHY [at least 0181b800] doesn't.
|
||
* Instead bit 9 and 13 of the BMCR are updated to the result
|
||
* of the negotiation..
|
||
*/
|
||
mii_reg = mdio_read(dev, np->phys[0], MII_BMCR);
|
||
duplex = mii_reg & BMCR_FULLDPLX;
|
||
fasteth = mii_reg & BMCR_SPEED100;
|
||
} else {
|
||
int negotiated;
|
||
mii_reg = mdio_read(dev, np->phys[0], MII_LPA);
|
||
negotiated = mii_reg & np->mii_if.advertising;
|
||
|
||
duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL);
|
||
fasteth = negotiated & 0x380;
|
||
}
|
||
duplex |= np->mii_if.force_media;
|
||
/* remove fastether and fullduplex */
|
||
result = np->csr6 & ~0x20000200;
|
||
if (duplex)
|
||
result |= 0x200;
|
||
if (fasteth)
|
||
result |= 0x20000000;
|
||
if (result != np->csr6 && debug)
|
||
printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
|
||
dev->name, fasteth ? 100 : 10,
|
||
duplex ? "full" : "half", np->phys[0]);
|
||
return result;
|
||
}
|
||
|
||
#define RXTX_TIMEOUT 2000
|
||
static inline void update_csr6(struct net_device *dev, int new)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
int limit = RXTX_TIMEOUT;
|
||
|
||
if (!netif_device_present(dev))
|
||
new = 0;
|
||
if (new==np->csr6)
|
||
return;
|
||
/* stop both Tx and Rx processes */
|
||
iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig);
|
||
/* wait until they have really stopped */
|
||
for (;;) {
|
||
int csr5 = ioread32(ioaddr + IntrStatus);
|
||
int t;
|
||
|
||
t = (csr5 >> 17) & 0x07;
|
||
if (t==0||t==1) {
|
||
/* rx stopped */
|
||
t = (csr5 >> 20) & 0x07;
|
||
if (t==0||t==1)
|
||
break;
|
||
}
|
||
|
||
limit--;
|
||
if(!limit) {
|
||
printk(KERN_INFO "%s: couldn't stop rxtx, IntrStatus %xh.\n",
|
||
dev->name, csr5);
|
||
break;
|
||
}
|
||
udelay(1);
|
||
}
|
||
np->csr6 = new;
|
||
/* and restart them with the new configuration */
|
||
iowrite32(np->csr6, ioaddr + NetworkConfig);
|
||
if (new & 0x200)
|
||
np->mii_if.full_duplex = 1;
|
||
}
|
||
|
||
static void netdev_timer(unsigned long data)
|
||
{
|
||
struct net_device *dev = (struct net_device *)data;
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
if (debug > 2)
|
||
printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
|
||
"config %8.8x.\n",
|
||
dev->name, ioread32(ioaddr + IntrStatus),
|
||
ioread32(ioaddr + NetworkConfig));
|
||
spin_lock_irq(&np->lock);
|
||
update_csr6(dev, update_link(dev));
|
||
spin_unlock_irq(&np->lock);
|
||
np->timer.expires = jiffies + 10*HZ;
|
||
add_timer(&np->timer);
|
||
}
|
||
|
||
static void init_rxtx_rings(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
int i;
|
||
|
||
np->rx_head_desc = &np->rx_ring[0];
|
||
np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE];
|
||
|
||
/* Initial all Rx descriptors. */
|
||
for (i = 0; i < RX_RING_SIZE; i++) {
|
||
np->rx_ring[i].length = np->rx_buf_sz;
|
||
np->rx_ring[i].status = 0;
|
||
np->rx_skbuff[i] = NULL;
|
||
}
|
||
/* Mark the last entry as wrapping the ring. */
|
||
np->rx_ring[i-1].length |= DescEndRing;
|
||
|
||
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
|
||
for (i = 0; i < RX_RING_SIZE; i++) {
|
||
struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
|
||
np->rx_skbuff[i] = skb;
|
||
if (skb == NULL)
|
||
break;
|
||
skb->dev = dev; /* Mark as being used by this device. */
|
||
np->rx_addr[i] = pci_map_single(np->pci_dev,skb->tail,
|
||
skb->len,PCI_DMA_FROMDEVICE);
|
||
|
||
np->rx_ring[i].buffer1 = np->rx_addr[i];
|
||
np->rx_ring[i].status = DescOwn;
|
||
}
|
||
|
||
np->cur_rx = 0;
|
||
np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
|
||
|
||
/* Initialize the Tx descriptors */
|
||
for (i = 0; i < TX_RING_SIZE; i++) {
|
||
np->tx_skbuff[i] = NULL;
|
||
np->tx_ring[i].status = 0;
|
||
}
|
||
np->tx_full = 0;
|
||
np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0;
|
||
|
||
iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr);
|
||
iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE,
|
||
np->base_addr + TxRingPtr);
|
||
|
||
}
|
||
|
||
static void free_rxtx_rings(struct netdev_private* np)
|
||
{
|
||
int i;
|
||
/* Free all the skbuffs in the Rx queue. */
|
||
for (i = 0; i < RX_RING_SIZE; i++) {
|
||
np->rx_ring[i].status = 0;
|
||
if (np->rx_skbuff[i]) {
|
||
pci_unmap_single(np->pci_dev,
|
||
np->rx_addr[i],
|
||
np->rx_skbuff[i]->len,
|
||
PCI_DMA_FROMDEVICE);
|
||
dev_kfree_skb(np->rx_skbuff[i]);
|
||
}
|
||
np->rx_skbuff[i] = NULL;
|
||
}
|
||
for (i = 0; i < TX_RING_SIZE; i++) {
|
||
if (np->tx_skbuff[i]) {
|
||
pci_unmap_single(np->pci_dev,
|
||
np->tx_addr[i],
|
||
np->tx_skbuff[i]->len,
|
||
PCI_DMA_TODEVICE);
|
||
dev_kfree_skb(np->tx_skbuff[i]);
|
||
}
|
||
np->tx_skbuff[i] = NULL;
|
||
}
|
||
}
|
||
|
||
static void init_registers(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
int i;
|
||
|
||
for (i = 0; i < 6; i++)
|
||
iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
|
||
|
||
/* Initialize other registers. */
|
||
#ifdef __BIG_ENDIAN
|
||
i = (1<<20); /* Big-endian descriptors */
|
||
#else
|
||
i = 0;
|
||
#endif
|
||
i |= (0x04<<2); /* skip length 4 u32 */
|
||
i |= 0x02; /* give Rx priority */
|
||
|
||
/* Configure the PCI bus bursts and FIFO thresholds.
|
||
486: Set 8 longword cache alignment, 8 longword burst.
|
||
586: Set 16 longword cache alignment, no burst limit.
|
||
Cache alignment bits 15:14 Burst length 13:8
|
||
0000 <not allowed> 0000 align to cache 0800 8 longwords
|
||
4000 8 longwords 0100 1 longword 1000 16 longwords
|
||
8000 16 longwords 0200 2 longwords 2000 32 longwords
|
||
C000 32 longwords 0400 4 longwords */
|
||
|
||
#if defined (__i386__) && !defined(MODULE)
|
||
/* When not a module we can work around broken '486 PCI boards. */
|
||
if (boot_cpu_data.x86 <= 4) {
|
||
i |= 0x4800;
|
||
printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
|
||
"alignment to 8 longwords.\n", dev->name);
|
||
} else {
|
||
i |= 0xE000;
|
||
}
|
||
#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
|
||
i |= 0xE000;
|
||
#elif defined(__sparc__)
|
||
i |= 0x4800;
|
||
#else
|
||
#warning Processor architecture undefined
|
||
i |= 0x4800;
|
||
#endif
|
||
iowrite32(i, ioaddr + PCIBusCfg);
|
||
|
||
np->csr6 = 0;
|
||
/* 128 byte Tx threshold;
|
||
Transmit on; Receive on; */
|
||
update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
|
||
|
||
/* Clear and Enable interrupts by setting the interrupt mask. */
|
||
iowrite32(0x1A0F5, ioaddr + IntrStatus);
|
||
iowrite32(0x1A0F5, ioaddr + IntrEnable);
|
||
|
||
iowrite32(0, ioaddr + RxStartDemand);
|
||
}
|
||
|
||
static void tx_timeout(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
|
||
" resetting...\n", dev->name, ioread32(ioaddr + IntrStatus));
|
||
|
||
{
|
||
int i;
|
||
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
|
||
for (i = 0; i < RX_RING_SIZE; i++)
|
||
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
|
||
printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring);
|
||
for (i = 0; i < TX_RING_SIZE; i++)
|
||
printk(" %8.8x", np->tx_ring[i].status);
|
||
printk("\n");
|
||
}
|
||
printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n",
|
||
np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
|
||
printk(KERN_DEBUG "Tx Descriptor addr %xh.\n",ioread32(ioaddr+0x4C));
|
||
|
||
disable_irq(dev->irq);
|
||
spin_lock_irq(&np->lock);
|
||
/*
|
||
* Under high load dirty_tx and the internal tx descriptor pointer
|
||
* come out of sync, thus perform a software reset and reinitialize
|
||
* everything.
|
||
*/
|
||
|
||
iowrite32(1, np->base_addr+PCIBusCfg);
|
||
udelay(1);
|
||
|
||
free_rxtx_rings(np);
|
||
init_rxtx_rings(dev);
|
||
init_registers(dev);
|
||
spin_unlock_irq(&np->lock);
|
||
enable_irq(dev->irq);
|
||
|
||
netif_wake_queue(dev);
|
||
dev->trans_start = jiffies;
|
||
np->stats.tx_errors++;
|
||
return;
|
||
}
|
||
|
||
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
||
static int alloc_ringdesc(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
|
||
np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
|
||
|
||
np->rx_ring = pci_alloc_consistent(np->pci_dev,
|
||
sizeof(struct w840_rx_desc)*RX_RING_SIZE +
|
||
sizeof(struct w840_tx_desc)*TX_RING_SIZE,
|
||
&np->ring_dma_addr);
|
||
if(!np->rx_ring)
|
||
return -ENOMEM;
|
||
init_rxtx_rings(dev);
|
||
return 0;
|
||
}
|
||
|
||
static void free_ringdesc(struct netdev_private *np)
|
||
{
|
||
pci_free_consistent(np->pci_dev,
|
||
sizeof(struct w840_rx_desc)*RX_RING_SIZE +
|
||
sizeof(struct w840_tx_desc)*TX_RING_SIZE,
|
||
np->rx_ring, np->ring_dma_addr);
|
||
|
||
}
|
||
|
||
static int start_tx(struct sk_buff *skb, struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
unsigned entry;
|
||
|
||
/* Caution: the write order is important here, set the field
|
||
with the "ownership" bits last. */
|
||
|
||
/* Calculate the next Tx descriptor entry. */
|
||
entry = np->cur_tx % TX_RING_SIZE;
|
||
|
||
np->tx_addr[entry] = pci_map_single(np->pci_dev,
|
||
skb->data,skb->len, PCI_DMA_TODEVICE);
|
||
np->tx_skbuff[entry] = skb;
|
||
|
||
np->tx_ring[entry].buffer1 = np->tx_addr[entry];
|
||
if (skb->len < TX_BUFLIMIT) {
|
||
np->tx_ring[entry].length = DescWholePkt | skb->len;
|
||
} else {
|
||
int len = skb->len - TX_BUFLIMIT;
|
||
|
||
np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT;
|
||
np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT;
|
||
}
|
||
if(entry == TX_RING_SIZE-1)
|
||
np->tx_ring[entry].length |= DescEndRing;
|
||
|
||
/* Now acquire the irq spinlock.
|
||
* The difficult race is the the ordering between
|
||
* increasing np->cur_tx and setting DescOwn:
|
||
* - if np->cur_tx is increased first the interrupt
|
||
* handler could consider the packet as transmitted
|
||
* since DescOwn is cleared.
|
||
* - If DescOwn is set first the NIC could report the
|
||
* packet as sent, but the interrupt handler would ignore it
|
||
* since the np->cur_tx was not yet increased.
|
||
*/
|
||
spin_lock_irq(&np->lock);
|
||
np->cur_tx++;
|
||
|
||
wmb(); /* flush length, buffer1, buffer2 */
|
||
np->tx_ring[entry].status = DescOwn;
|
||
wmb(); /* flush status and kick the hardware */
|
||
iowrite32(0, np->base_addr + TxStartDemand);
|
||
np->tx_q_bytes += skb->len;
|
||
/* Work around horrible bug in the chip by marking the queue as full
|
||
when we do not have FIFO room for a maximum sized packet. */
|
||
if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN ||
|
||
((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) {
|
||
netif_stop_queue(dev);
|
||
wmb();
|
||
np->tx_full = 1;
|
||
}
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
dev->trans_start = jiffies;
|
||
|
||
if (debug > 4) {
|
||
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
|
||
dev->name, np->cur_tx, entry);
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
static void netdev_tx_done(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
|
||
int entry = np->dirty_tx % TX_RING_SIZE;
|
||
int tx_status = np->tx_ring[entry].status;
|
||
|
||
if (tx_status < 0)
|
||
break;
|
||
if (tx_status & 0x8000) { /* There was an error, log it. */
|
||
#ifndef final_version
|
||
if (debug > 1)
|
||
printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
|
||
dev->name, tx_status);
|
||
#endif
|
||
np->stats.tx_errors++;
|
||
if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
|
||
if (tx_status & 0x0C80) np->stats.tx_carrier_errors++;
|
||
if (tx_status & 0x0200) np->stats.tx_window_errors++;
|
||
if (tx_status & 0x0002) np->stats.tx_fifo_errors++;
|
||
if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0)
|
||
np->stats.tx_heartbeat_errors++;
|
||
} else {
|
||
#ifndef final_version
|
||
if (debug > 3)
|
||
printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %8.8x.\n",
|
||
dev->name, entry, tx_status);
|
||
#endif
|
||
np->stats.tx_bytes += np->tx_skbuff[entry]->len;
|
||
np->stats.collisions += (tx_status >> 3) & 15;
|
||
np->stats.tx_packets++;
|
||
}
|
||
/* Free the original skb. */
|
||
pci_unmap_single(np->pci_dev,np->tx_addr[entry],
|
||
np->tx_skbuff[entry]->len,
|
||
PCI_DMA_TODEVICE);
|
||
np->tx_q_bytes -= np->tx_skbuff[entry]->len;
|
||
dev_kfree_skb_irq(np->tx_skbuff[entry]);
|
||
np->tx_skbuff[entry] = NULL;
|
||
}
|
||
if (np->tx_full &&
|
||
np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART &&
|
||
np->tx_q_bytes < TX_BUG_FIFO_LIMIT) {
|
||
/* The ring is no longer full, clear tbusy. */
|
||
np->tx_full = 0;
|
||
wmb();
|
||
netif_wake_queue(dev);
|
||
}
|
||
}
|
||
|
||
/* The interrupt handler does all of the Rx thread work and cleans up
|
||
after the Tx thread. */
|
||
static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
|
||
{
|
||
struct net_device *dev = (struct net_device *)dev_instance;
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
int work_limit = max_interrupt_work;
|
||
int handled = 0;
|
||
|
||
if (!netif_device_present(dev))
|
||
return IRQ_NONE;
|
||
do {
|
||
u32 intr_status = ioread32(ioaddr + IntrStatus);
|
||
|
||
/* Acknowledge all of the current interrupt sources ASAP. */
|
||
iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
|
||
|
||
if (debug > 4)
|
||
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
|
||
dev->name, intr_status);
|
||
|
||
if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
|
||
break;
|
||
|
||
handled = 1;
|
||
|
||
if (intr_status & (IntrRxDone | RxNoBuf))
|
||
netdev_rx(dev);
|
||
if (intr_status & RxNoBuf)
|
||
iowrite32(0, ioaddr + RxStartDemand);
|
||
|
||
if (intr_status & (TxIdle | IntrTxDone) &&
|
||
np->cur_tx != np->dirty_tx) {
|
||
spin_lock(&np->lock);
|
||
netdev_tx_done(dev);
|
||
spin_unlock(&np->lock);
|
||
}
|
||
|
||
/* Abnormal error summary/uncommon events handlers. */
|
||
if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr |
|
||
TimerInt | IntrTxStopped))
|
||
netdev_error(dev, intr_status);
|
||
|
||
if (--work_limit < 0) {
|
||
printk(KERN_WARNING "%s: Too much work at interrupt, "
|
||
"status=0x%4.4x.\n", dev->name, intr_status);
|
||
/* Set the timer to re-enable the other interrupts after
|
||
10*82usec ticks. */
|
||
spin_lock(&np->lock);
|
||
if (netif_device_present(dev)) {
|
||
iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable);
|
||
iowrite32(10, ioaddr + GPTimer);
|
||
}
|
||
spin_unlock(&np->lock);
|
||
break;
|
||
}
|
||
} while (1);
|
||
|
||
if (debug > 3)
|
||
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
|
||
dev->name, ioread32(ioaddr + IntrStatus));
|
||
return IRQ_RETVAL(handled);
|
||
}
|
||
|
||
/* This routine is logically part of the interrupt handler, but separated
|
||
for clarity and better register allocation. */
|
||
static int netdev_rx(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
int entry = np->cur_rx % RX_RING_SIZE;
|
||
int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
|
||
|
||
if (debug > 4) {
|
||
printk(KERN_DEBUG " In netdev_rx(), entry %d status %4.4x.\n",
|
||
entry, np->rx_ring[entry].status);
|
||
}
|
||
|
||
/* If EOP is set on the next entry, it's a new packet. Send it up. */
|
||
while (--work_limit >= 0) {
|
||
struct w840_rx_desc *desc = np->rx_head_desc;
|
||
s32 status = desc->status;
|
||
|
||
if (debug > 4)
|
||
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
|
||
status);
|
||
if (status < 0)
|
||
break;
|
||
if ((status & 0x38008300) != 0x0300) {
|
||
if ((status & 0x38000300) != 0x0300) {
|
||
/* Ingore earlier buffers. */
|
||
if ((status & 0xffff) != 0x7fff) {
|
||
printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
|
||
"multiple buffers, entry %#x status %4.4x!\n",
|
||
dev->name, np->cur_rx, status);
|
||
np->stats.rx_length_errors++;
|
||
}
|
||
} else if (status & 0x8000) {
|
||
/* There was a fatal error. */
|
||
if (debug > 2)
|
||
printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
|
||
dev->name, status);
|
||
np->stats.rx_errors++; /* end of a packet.*/
|
||
if (status & 0x0890) np->stats.rx_length_errors++;
|
||
if (status & 0x004C) np->stats.rx_frame_errors++;
|
||
if (status & 0x0002) np->stats.rx_crc_errors++;
|
||
}
|
||
} else {
|
||
struct sk_buff *skb;
|
||
/* Omit the four octet CRC from the length. */
|
||
int pkt_len = ((status >> 16) & 0x7ff) - 4;
|
||
|
||
#ifndef final_version
|
||
if (debug > 4)
|
||
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
|
||
" status %x.\n", pkt_len, status);
|
||
#endif
|
||
/* Check if the packet is long enough to accept without copying
|
||
to a minimally-sized skbuff. */
|
||
if (pkt_len < rx_copybreak
|
||
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
||
skb->dev = dev;
|
||
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
||
pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
|
||
np->rx_skbuff[entry]->len,
|
||
PCI_DMA_FROMDEVICE);
|
||
eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0);
|
||
skb_put(skb, pkt_len);
|
||
pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
|
||
np->rx_skbuff[entry]->len,
|
||
PCI_DMA_FROMDEVICE);
|
||
} else {
|
||
pci_unmap_single(np->pci_dev,np->rx_addr[entry],
|
||
np->rx_skbuff[entry]->len,
|
||
PCI_DMA_FROMDEVICE);
|
||
skb_put(skb = np->rx_skbuff[entry], pkt_len);
|
||
np->rx_skbuff[entry] = NULL;
|
||
}
|
||
#ifndef final_version /* Remove after testing. */
|
||
/* You will want this info for the initial debug. */
|
||
if (debug > 5)
|
||
printk(KERN_DEBUG " Rx data %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:"
|
||
"%2.2x %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x %2.2x%2.2x "
|
||
"%d.%d.%d.%d.\n",
|
||
skb->data[0], skb->data[1], skb->data[2], skb->data[3],
|
||
skb->data[4], skb->data[5], skb->data[6], skb->data[7],
|
||
skb->data[8], skb->data[9], skb->data[10],
|
||
skb->data[11], skb->data[12], skb->data[13],
|
||
skb->data[14], skb->data[15], skb->data[16],
|
||
skb->data[17]);
|
||
#endif
|
||
skb->protocol = eth_type_trans(skb, dev);
|
||
netif_rx(skb);
|
||
dev->last_rx = jiffies;
|
||
np->stats.rx_packets++;
|
||
np->stats.rx_bytes += pkt_len;
|
||
}
|
||
entry = (++np->cur_rx) % RX_RING_SIZE;
|
||
np->rx_head_desc = &np->rx_ring[entry];
|
||
}
|
||
|
||
/* Refill the Rx ring buffers. */
|
||
for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
|
||
struct sk_buff *skb;
|
||
entry = np->dirty_rx % RX_RING_SIZE;
|
||
if (np->rx_skbuff[entry] == NULL) {
|
||
skb = dev_alloc_skb(np->rx_buf_sz);
|
||
np->rx_skbuff[entry] = skb;
|
||
if (skb == NULL)
|
||
break; /* Better luck next round. */
|
||
skb->dev = dev; /* Mark as being used by this device. */
|
||
np->rx_addr[entry] = pci_map_single(np->pci_dev,
|
||
skb->tail,
|
||
skb->len, PCI_DMA_FROMDEVICE);
|
||
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
|
||
}
|
||
wmb();
|
||
np->rx_ring[entry].status = DescOwn;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void netdev_error(struct net_device *dev, int intr_status)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
if (debug > 2)
|
||
printk(KERN_DEBUG "%s: Abnormal event, %8.8x.\n",
|
||
dev->name, intr_status);
|
||
if (intr_status == 0xffffffff)
|
||
return;
|
||
spin_lock(&np->lock);
|
||
if (intr_status & TxFIFOUnderflow) {
|
||
int new;
|
||
/* Bump up the Tx threshold */
|
||
#if 0
|
||
/* This causes lots of dropped packets,
|
||
* and under high load even tx_timeouts
|
||
*/
|
||
new = np->csr6 + 0x4000;
|
||
#else
|
||
new = (np->csr6 >> 14)&0x7f;
|
||
if (new < 64)
|
||
new *= 2;
|
||
else
|
||
new = 127; /* load full packet before starting */
|
||
new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
|
||
#endif
|
||
printk(KERN_DEBUG "%s: Tx underflow, new csr6 %8.8x.\n",
|
||
dev->name, new);
|
||
update_csr6(dev, new);
|
||
}
|
||
if (intr_status & IntrRxDied) { /* Missed a Rx frame. */
|
||
np->stats.rx_errors++;
|
||
}
|
||
if (intr_status & TimerInt) {
|
||
/* Re-enable other interrupts. */
|
||
if (netif_device_present(dev))
|
||
iowrite32(0x1A0F5, ioaddr + IntrEnable);
|
||
}
|
||
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
||
iowrite32(0, ioaddr + RxStartDemand);
|
||
spin_unlock(&np->lock);
|
||
}
|
||
|
||
static struct net_device_stats *get_stats(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
/* The chip only need report frame silently dropped. */
|
||
spin_lock_irq(&np->lock);
|
||
if (netif_running(dev) && netif_device_present(dev))
|
||
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
return &np->stats;
|
||
}
|
||
|
||
|
||
static u32 __set_rx_mode(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
u32 mc_filter[2]; /* Multicast hash filter */
|
||
u32 rx_mode;
|
||
|
||
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
||
/* Unconditionally log net taps. */
|
||
printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
|
||
memset(mc_filter, 0xff, sizeof(mc_filter));
|
||
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys
|
||
| AcceptMyPhys;
|
||
} else if ((dev->mc_count > multicast_filter_limit)
|
||
|| (dev->flags & IFF_ALLMULTI)) {
|
||
/* Too many to match, or accept all multicasts. */
|
||
memset(mc_filter, 0xff, sizeof(mc_filter));
|
||
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
||
} else {
|
||
struct dev_mc_list *mclist;
|
||
int i;
|
||
memset(mc_filter, 0, sizeof(mc_filter));
|
||
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
||
i++, mclist = mclist->next) {
|
||
int filterbit = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26) ^ 0x3F;
|
||
filterbit &= 0x3f;
|
||
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
|
||
}
|
||
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
||
}
|
||
iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
|
||
iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
|
||
return rx_mode;
|
||
}
|
||
|
||
static void set_rx_mode(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
u32 rx_mode = __set_rx_mode(dev);
|
||
spin_lock_irq(&np->lock);
|
||
update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode);
|
||
spin_unlock_irq(&np->lock);
|
||
}
|
||
|
||
static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
|
||
strcpy (info->driver, DRV_NAME);
|
||
strcpy (info->version, DRV_VERSION);
|
||
strcpy (info->bus_info, pci_name(np->pci_dev));
|
||
}
|
||
|
||
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
int rc;
|
||
|
||
spin_lock_irq(&np->lock);
|
||
rc = mii_ethtool_gset(&np->mii_if, cmd);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
int rc;
|
||
|
||
spin_lock_irq(&np->lock);
|
||
rc = mii_ethtool_sset(&np->mii_if, cmd);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int netdev_nway_reset(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
return mii_nway_restart(&np->mii_if);
|
||
}
|
||
|
||
static u32 netdev_get_link(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
return mii_link_ok(&np->mii_if);
|
||
}
|
||
|
||
static u32 netdev_get_msglevel(struct net_device *dev)
|
||
{
|
||
return debug;
|
||
}
|
||
|
||
static void netdev_set_msglevel(struct net_device *dev, u32 value)
|
||
{
|
||
debug = value;
|
||
}
|
||
|
||
static struct ethtool_ops netdev_ethtool_ops = {
|
||
.get_drvinfo = netdev_get_drvinfo,
|
||
.get_settings = netdev_get_settings,
|
||
.set_settings = netdev_set_settings,
|
||
.nway_reset = netdev_nway_reset,
|
||
.get_link = netdev_get_link,
|
||
.get_msglevel = netdev_get_msglevel,
|
||
.set_msglevel = netdev_set_msglevel,
|
||
.get_sg = ethtool_op_get_sg,
|
||
.get_tx_csum = ethtool_op_get_tx_csum,
|
||
};
|
||
|
||
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
||
{
|
||
struct mii_ioctl_data *data = if_mii(rq);
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
|
||
switch(cmd) {
|
||
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
||
data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f;
|
||
/* Fall Through */
|
||
|
||
case SIOCGMIIREG: /* Read MII PHY register. */
|
||
spin_lock_irq(&np->lock);
|
||
data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
|
||
spin_unlock_irq(&np->lock);
|
||
return 0;
|
||
|
||
case SIOCSMIIREG: /* Write MII PHY register. */
|
||
if (!capable(CAP_NET_ADMIN))
|
||
return -EPERM;
|
||
spin_lock_irq(&np->lock);
|
||
mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
|
||
spin_unlock_irq(&np->lock);
|
||
return 0;
|
||
default:
|
||
return -EOPNOTSUPP;
|
||
}
|
||
}
|
||
|
||
static int netdev_close(struct net_device *dev)
|
||
{
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
netif_stop_queue(dev);
|
||
|
||
if (debug > 1) {
|
||
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %8.8x "
|
||
"Config %8.8x.\n", dev->name, ioread32(ioaddr + IntrStatus),
|
||
ioread32(ioaddr + NetworkConfig));
|
||
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
|
||
dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
|
||
}
|
||
|
||
/* Stop the chip's Tx and Rx processes. */
|
||
spin_lock_irq(&np->lock);
|
||
netif_device_detach(dev);
|
||
update_csr6(dev, 0);
|
||
iowrite32(0x0000, ioaddr + IntrEnable);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
free_irq(dev->irq, dev);
|
||
wmb();
|
||
netif_device_attach(dev);
|
||
|
||
if (ioread32(ioaddr + NetworkConfig) != 0xffffffff)
|
||
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
||
|
||
#ifdef __i386__
|
||
if (debug > 2) {
|
||
int i;
|
||
|
||
printk(KERN_DEBUG" Tx ring at %8.8x:\n",
|
||
(int)np->tx_ring);
|
||
for (i = 0; i < TX_RING_SIZE; i++)
|
||
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
|
||
i, np->tx_ring[i].length,
|
||
np->tx_ring[i].status, np->tx_ring[i].buffer1);
|
||
printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
|
||
(int)np->rx_ring);
|
||
for (i = 0; i < RX_RING_SIZE; i++) {
|
||
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
|
||
i, np->rx_ring[i].length,
|
||
np->rx_ring[i].status, np->rx_ring[i].buffer1);
|
||
}
|
||
}
|
||
#endif /* __i386__ debugging only */
|
||
|
||
del_timer_sync(&np->timer);
|
||
|
||
free_rxtx_rings(np);
|
||
free_ringdesc(np);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void __devexit w840_remove1 (struct pci_dev *pdev)
|
||
{
|
||
struct net_device *dev = pci_get_drvdata(pdev);
|
||
|
||
if (dev) {
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
unregister_netdev(dev);
|
||
pci_release_regions(pdev);
|
||
pci_iounmap(pdev, np->base_addr);
|
||
free_netdev(dev);
|
||
}
|
||
|
||
pci_set_drvdata(pdev, NULL);
|
||
}
|
||
|
||
#ifdef CONFIG_PM
|
||
|
||
/*
|
||
* suspend/resume synchronization:
|
||
* - open, close, do_ioctl:
|
||
* rtnl_lock, & netif_device_detach after the rtnl_unlock.
|
||
* - get_stats:
|
||
* spin_lock_irq(np->lock), doesn't touch hw if not present
|
||
* - hard_start_xmit:
|
||
* netif_stop_queue + spin_unlock_wait(&dev->xmit_lock);
|
||
* - tx_timeout:
|
||
* netif_device_detach + spin_unlock_wait(&dev->xmit_lock);
|
||
* - set_multicast_list
|
||
* netif_device_detach + spin_unlock_wait(&dev->xmit_lock);
|
||
* - interrupt handler
|
||
* doesn't touch hw if not present, synchronize_irq waits for
|
||
* running instances of the interrupt handler.
|
||
*
|
||
* Disabling hw requires clearing csr6 & IntrEnable.
|
||
* update_csr6 & all function that write IntrEnable check netif_device_present
|
||
* before settings any bits.
|
||
*
|
||
* Detach must occur under spin_unlock_irq(), interrupts from a detached
|
||
* device would cause an irq storm.
|
||
*/
|
||
static int w840_suspend (struct pci_dev *pdev, u32 state)
|
||
{
|
||
struct net_device *dev = pci_get_drvdata (pdev);
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
void __iomem *ioaddr = np->base_addr;
|
||
|
||
rtnl_lock();
|
||
if (netif_running (dev)) {
|
||
del_timer_sync(&np->timer);
|
||
|
||
spin_lock_irq(&np->lock);
|
||
netif_device_detach(dev);
|
||
update_csr6(dev, 0);
|
||
iowrite32(0, ioaddr + IntrEnable);
|
||
netif_stop_queue(dev);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
spin_unlock_wait(&dev->xmit_lock);
|
||
synchronize_irq(dev->irq);
|
||
|
||
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
|
||
|
||
/* no more hardware accesses behind this line. */
|
||
|
||
if (np->csr6) BUG();
|
||
if (ioread32(ioaddr + IntrEnable)) BUG();
|
||
|
||
/* pci_power_off(pdev, -1); */
|
||
|
||
free_rxtx_rings(np);
|
||
} else {
|
||
netif_device_detach(dev);
|
||
}
|
||
rtnl_unlock();
|
||
return 0;
|
||
}
|
||
|
||
static int w840_resume (struct pci_dev *pdev)
|
||
{
|
||
struct net_device *dev = pci_get_drvdata (pdev);
|
||
struct netdev_private *np = netdev_priv(dev);
|
||
|
||
rtnl_lock();
|
||
if (netif_device_present(dev))
|
||
goto out; /* device not suspended */
|
||
if (netif_running(dev)) {
|
||
pci_enable_device(pdev);
|
||
/* pci_power_on(pdev); */
|
||
|
||
spin_lock_irq(&np->lock);
|
||
iowrite32(1, np->base_addr+PCIBusCfg);
|
||
ioread32(np->base_addr+PCIBusCfg);
|
||
udelay(1);
|
||
netif_device_attach(dev);
|
||
init_rxtx_rings(dev);
|
||
init_registers(dev);
|
||
spin_unlock_irq(&np->lock);
|
||
|
||
netif_wake_queue(dev);
|
||
|
||
mod_timer(&np->timer, jiffies + 1*HZ);
|
||
} else {
|
||
netif_device_attach(dev);
|
||
}
|
||
out:
|
||
rtnl_unlock();
|
||
return 0;
|
||
}
|
||
#endif
|
||
|
||
static struct pci_driver w840_driver = {
|
||
.name = DRV_NAME,
|
||
.id_table = w840_pci_tbl,
|
||
.probe = w840_probe1,
|
||
.remove = __devexit_p(w840_remove1),
|
||
#ifdef CONFIG_PM
|
||
.suspend = w840_suspend,
|
||
.resume = w840_resume,
|
||
#endif
|
||
};
|
||
|
||
static int __init w840_init(void)
|
||
{
|
||
printk(version);
|
||
return pci_module_init(&w840_driver);
|
||
}
|
||
|
||
static void __exit w840_exit(void)
|
||
{
|
||
pci_unregister_driver(&w840_driver);
|
||
}
|
||
|
||
module_init(w840_init);
|
||
module_exit(w840_exit);
|