mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 16:41:58 +00:00
912b843904
There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via ACPI ID INT3492. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
399 lines
9.8 KiB
C
399 lines
9.8 KiB
C
/*
|
|
* Driver for PCA9685 16-channel 12-bit PWM LED controller
|
|
*
|
|
* Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
|
|
* Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
|
|
*
|
|
* based on the pwm-twl-led.c driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
/*
|
|
* Because the PCA9685 has only one prescaler per chip, changing the period of
|
|
* one channel affects the period of all 16 PWM outputs!
|
|
* However, the ratio between each configured duty cycle and the chip-wide
|
|
* period remains constant, because the OFF time is set in proportion to the
|
|
* counter range.
|
|
*/
|
|
|
|
#define PCA9685_MODE1 0x00
|
|
#define PCA9685_MODE2 0x01
|
|
#define PCA9685_SUBADDR1 0x02
|
|
#define PCA9685_SUBADDR2 0x03
|
|
#define PCA9685_SUBADDR3 0x04
|
|
#define PCA9685_ALLCALLADDR 0x05
|
|
#define PCA9685_LEDX_ON_L 0x06
|
|
#define PCA9685_LEDX_ON_H 0x07
|
|
#define PCA9685_LEDX_OFF_L 0x08
|
|
#define PCA9685_LEDX_OFF_H 0x09
|
|
|
|
#define PCA9685_ALL_LED_ON_L 0xFA
|
|
#define PCA9685_ALL_LED_ON_H 0xFB
|
|
#define PCA9685_ALL_LED_OFF_L 0xFC
|
|
#define PCA9685_ALL_LED_OFF_H 0xFD
|
|
#define PCA9685_PRESCALE 0xFE
|
|
|
|
#define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */
|
|
#define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */
|
|
|
|
#define PCA9685_COUNTER_RANGE 4096
|
|
#define PCA9685_DEFAULT_PERIOD 5000000 /* Default period_ns = 1/200 Hz */
|
|
#define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */
|
|
|
|
#define PCA9685_NUMREGS 0xFF
|
|
#define PCA9685_MAXCHAN 0x10
|
|
|
|
#define LED_FULL (1 << 4)
|
|
#define MODE1_RESTART (1 << 7)
|
|
#define MODE1_SLEEP (1 << 4)
|
|
#define MODE2_INVRT (1 << 4)
|
|
#define MODE2_OUTDRV (1 << 2)
|
|
|
|
#define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N)))
|
|
#define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N)))
|
|
#define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N)))
|
|
#define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N)))
|
|
|
|
struct pca9685 {
|
|
struct pwm_chip chip;
|
|
struct regmap *regmap;
|
|
int active_cnt;
|
|
int duty_ns;
|
|
int period_ns;
|
|
};
|
|
|
|
static inline struct pca9685 *to_pca(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct pca9685, chip);
|
|
}
|
|
|
|
static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct pca9685 *pca = to_pca(chip);
|
|
unsigned long long duty;
|
|
unsigned int reg;
|
|
int prescale;
|
|
|
|
if (period_ns != pca->period_ns) {
|
|
prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns,
|
|
PCA9685_COUNTER_RANGE * 1000) - 1;
|
|
|
|
if (prescale >= PCA9685_PRESCALE_MIN &&
|
|
prescale <= PCA9685_PRESCALE_MAX) {
|
|
/* Put chip into sleep mode */
|
|
regmap_update_bits(pca->regmap, PCA9685_MODE1,
|
|
MODE1_SLEEP, MODE1_SLEEP);
|
|
|
|
/* Change the chip-wide output frequency */
|
|
regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
|
|
|
|
/* Wake the chip up */
|
|
regmap_update_bits(pca->regmap, PCA9685_MODE1,
|
|
MODE1_SLEEP, 0x0);
|
|
|
|
/* Wait 500us for the oscillator to be back up */
|
|
udelay(500);
|
|
|
|
pca->period_ns = period_ns;
|
|
|
|
/*
|
|
* If the duty cycle did not change, restart PWM with
|
|
* the same duty cycle to period ratio and return.
|
|
*/
|
|
if (duty_ns == pca->duty_ns) {
|
|
regmap_update_bits(pca->regmap, PCA9685_MODE1,
|
|
MODE1_RESTART, 0x1);
|
|
return 0;
|
|
}
|
|
} else {
|
|
dev_err(chip->dev,
|
|
"prescaler not set: period out of bounds!\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
pca->duty_ns = duty_ns;
|
|
|
|
if (duty_ns < 1) {
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_H;
|
|
else
|
|
reg = LED_N_OFF_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, LED_FULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (duty_ns == period_ns) {
|
|
/* Clear both OFF registers */
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_L;
|
|
else
|
|
reg = LED_N_OFF_L(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0x0);
|
|
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_H;
|
|
else
|
|
reg = LED_N_OFF_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0x0);
|
|
|
|
/* Set the full ON bit */
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_ON_H;
|
|
else
|
|
reg = LED_N_ON_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, LED_FULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns;
|
|
duty = DIV_ROUND_UP_ULL(duty, period_ns);
|
|
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_L;
|
|
else
|
|
reg = LED_N_OFF_L(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, (int)duty & 0xff);
|
|
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_H;
|
|
else
|
|
reg = LED_N_OFF_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
|
|
|
|
/* Clear the full ON bit, otherwise the set OFF time has no effect */
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_ON_H;
|
|
else
|
|
reg = LED_N_ON_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pca9685 *pca = to_pca(chip);
|
|
unsigned int reg;
|
|
|
|
/*
|
|
* The PWM subsystem does not support a pre-delay.
|
|
* So, set the ON-timeout to 0
|
|
*/
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_ON_L;
|
|
else
|
|
reg = LED_N_ON_L(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0);
|
|
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_ON_H;
|
|
else
|
|
reg = LED_N_ON_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0);
|
|
|
|
/*
|
|
* Clear the full-off bit.
|
|
* It has precedence over the others and must be off.
|
|
*/
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_H;
|
|
else
|
|
reg = LED_N_OFF_H(pwm->hwpwm);
|
|
|
|
regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pca9685 *pca = to_pca(chip);
|
|
unsigned int reg;
|
|
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_H;
|
|
else
|
|
reg = LED_N_OFF_H(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, LED_FULL);
|
|
|
|
/* Clear the LED_OFF counter. */
|
|
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
|
reg = PCA9685_ALL_LED_OFF_L;
|
|
else
|
|
reg = LED_N_OFF_L(pwm->hwpwm);
|
|
|
|
regmap_write(pca->regmap, reg, 0x0);
|
|
}
|
|
|
|
static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pca9685 *pca = to_pca(chip);
|
|
|
|
if (pca->active_cnt++ == 0)
|
|
return regmap_update_bits(pca->regmap, PCA9685_MODE1,
|
|
MODE1_SLEEP, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct pca9685 *pca = to_pca(chip);
|
|
|
|
if (--pca->active_cnt == 0)
|
|
regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
|
|
MODE1_SLEEP);
|
|
}
|
|
|
|
static const struct pwm_ops pca9685_pwm_ops = {
|
|
.enable = pca9685_pwm_enable,
|
|
.disable = pca9685_pwm_disable,
|
|
.config = pca9685_pwm_config,
|
|
.request = pca9685_pwm_request,
|
|
.free = pca9685_pwm_free,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct regmap_config pca9685_regmap_i2c_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = PCA9685_NUMREGS,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static int pca9685_pwm_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct pca9685 *pca;
|
|
int ret;
|
|
int mode2;
|
|
|
|
pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
|
|
if (!pca)
|
|
return -ENOMEM;
|
|
|
|
pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
|
|
if (IS_ERR(pca->regmap)) {
|
|
ret = PTR_ERR(pca->regmap);
|
|
dev_err(&client->dev, "Failed to initialize register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
pca->duty_ns = 0;
|
|
pca->period_ns = PCA9685_DEFAULT_PERIOD;
|
|
|
|
i2c_set_clientdata(client, pca);
|
|
|
|
regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
|
|
|
|
if (device_property_read_bool(&client->dev, "invert"))
|
|
mode2 |= MODE2_INVRT;
|
|
else
|
|
mode2 &= ~MODE2_INVRT;
|
|
|
|
if (device_property_read_bool(&client->dev, "open-drain"))
|
|
mode2 &= ~MODE2_OUTDRV;
|
|
else
|
|
mode2 |= MODE2_OUTDRV;
|
|
|
|
regmap_write(pca->regmap, PCA9685_MODE2, mode2);
|
|
|
|
/* clear all "full off" bits */
|
|
regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
|
|
regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
|
|
|
|
pca->chip.ops = &pca9685_pwm_ops;
|
|
/* add an extra channel for ALL_LED */
|
|
pca->chip.npwm = PCA9685_MAXCHAN + 1;
|
|
|
|
pca->chip.dev = &client->dev;
|
|
pca->chip.base = -1;
|
|
pca->chip.can_sleep = true;
|
|
|
|
return pwmchip_add(&pca->chip);
|
|
}
|
|
|
|
static int pca9685_pwm_remove(struct i2c_client *client)
|
|
{
|
|
struct pca9685 *pca = i2c_get_clientdata(client);
|
|
|
|
regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
|
|
MODE1_SLEEP);
|
|
|
|
return pwmchip_remove(&pca->chip);
|
|
}
|
|
|
|
static const struct i2c_device_id pca9685_id[] = {
|
|
{ "pca9685", 0 },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, pca9685_id);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id pca9685_acpi_ids[] = {
|
|
{ "INT3492", 0 },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pca9685_dt_ids[] = {
|
|
{ .compatible = "nxp,pca9685-pwm", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver pca9685_i2c_driver = {
|
|
.driver = {
|
|
.name = "pca9685-pwm",
|
|
.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
|
|
.of_match_table = of_match_ptr(pca9685_dt_ids),
|
|
},
|
|
.probe = pca9685_pwm_probe,
|
|
.remove = pca9685_pwm_remove,
|
|
.id_table = pca9685_id,
|
|
};
|
|
|
|
module_i2c_driver(pca9685_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
|
|
MODULE_DESCRIPTION("PWM driver for PCA9685");
|
|
MODULE_LICENSE("GPL");
|