Jarkko Nikula 0b6048561d ASoC: OMAP: Add more supported sample rates into McBSP DAI driver ... Originally it was put too tight limits to support only 44.1 kHz and 48 kHz sample rates in McBSP DAI driver. Extend it now to 8 kHz - 96 kHz. With 96 kHz and 2*16 bits, bit clock is 3.072 MHz < 3.125 MHz (I2S max?). Tested on Nokia N810 with TVL320AIC33 from rates 8 - 96 kHz and on Texas Instruments Beagle with TWL4030 from rates 8 - 48 kHz. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Steve Sakoman <steve@sakoman.com> Acked-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>		2008-11-13 10:31:44 +00:00
..
Kconfig	ASoC: Add support for Gumstix Overo	2008-10-31 12:33:38 +00:00
Makefile	ASoC: Add support for Gumstix Overo	2008-10-31 12:33:38 +00:00
n810.c	ALSA: ASoC: Use snd_soc_dapm_nc_pin() in N810 machine driver	2008-10-13 02:16:41 +02:00
omap-mcbsp.c	ASoC: OMAP: Add more supported sample rates into McBSP DAI driver	2008-11-13 10:31:44 +00:00
omap-mcbsp.h	ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver	2008-10-13 02:17:48 +02:00
omap-pcm.c	ALSA: ASoC: Add destination and source port for DMA on OMAP1	2008-10-13 02:18:26 +02:00
omap-pcm.h	[ALSA] ASoC: Add drivers for the Texas Instruments OMAP processors	2008-04-29 19:01:56 +02:00
omap3beagle.c	ASoC: Add support for Beagleboard	2008-10-31 12:33:43 +00:00
osk5912.c	ALSA: ASoC: Add support for osk5912	2008-10-13 02:16:53 +02:00
overo.c	ASoC: Add support for Gumstix Overo	2008-10-31 12:33:38 +00:00