linux/arch/sparc/kernel/sun4m_irq.c
Stephen Rothwell a755180bab sun4M: add include of slab.h for kzalloc
This was being included implicitly via cgroup.h's inclusion of xattr.h
(which has now been removed).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-02-12 16:10:45 -05:00

476 lines
14 KiB
C

/*
* sun4m irq support
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <linux/slab.h>
#include <asm/timer.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include "irq.h"
#include "kernel.h"
/* Sample sun4m IRQ layout:
*
* 0x22 - Power
* 0x24 - ESP SCSI
* 0x26 - Lance ethernet
* 0x2b - Floppy
* 0x2c - Zilog uart
* 0x32 - SBUS level 0
* 0x33 - Parallel port, SBUS level 1
* 0x35 - SBUS level 2
* 0x37 - SBUS level 3
* 0x39 - Audio, Graphics card, SBUS level 4
* 0x3b - SBUS level 5
* 0x3d - SBUS level 6
*
* Each interrupt source has a mask bit in the interrupt registers.
* When the mask bit is set, this blocks interrupt deliver. So you
* clear the bit to enable the interrupt.
*
* Interrupts numbered less than 0x10 are software triggered interrupts
* and unused by Linux.
*
* Interrupt level assignment on sun4m:
*
* level source
* ------------------------------------------------------------
* 1 softint-1
* 2 softint-2, VME/SBUS level 1
* 3 softint-3, VME/SBUS level 2
* 4 softint-4, onboard SCSI
* 5 softint-5, VME/SBUS level 3
* 6 softint-6, onboard ETHERNET
* 7 softint-7, VME/SBUS level 4
* 8 softint-8, onboard VIDEO
* 9 softint-9, VME/SBUS level 5, Module Interrupt
* 10 softint-10, system counter/timer
* 11 softint-11, VME/SBUS level 6, Floppy
* 12 softint-12, Keyboard/Mouse, Serial
* 13 softint-13, VME/SBUS level 7, ISDN Audio
* 14 softint-14, per-processor counter/timer
* 15 softint-15, Asynchronous Errors (broadcast)
*
* Each interrupt source is masked distinctly in the sun4m interrupt
* registers. The PIL level alone is therefore ambiguous, since multiple
* interrupt sources map to a single PIL.
*
* This ambiguity is resolved in the 'intr' property for device nodes
* in the OF device tree. Each 'intr' property entry is composed of
* two 32-bit words. The first word is the IRQ priority value, which
* is what we're intersted in. The second word is the IRQ vector, which
* is unused.
*
* The low 4 bits of the IRQ priority indicate the PIL, and the upper
* 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
* means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
*
* For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
* whereas a value of 0x33 is SBUS level 2. Here are some sample
* 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
* Tadpole S3 GX systems.
*
* esp: 0x24 onboard ESP SCSI
* le: 0x26 onboard Lance ETHERNET
* p9100: 0x32 SBUS level 1 P9100 video
* bpp: 0x33 SBUS level 2 BPP parallel port device
* DBRI: 0x39 SBUS level 5 DBRI ISDN audio
* SUNW,leo: 0x39 SBUS level 5 LEO video
* pcmcia: 0x3b SBUS level 6 PCMCIA controller
* uctrl: 0x3b SBUS level 6 UCTRL device
* modem: 0x3d SBUS level 7 MODEM
* zs: 0x2c onboard keyboard/mouse/serial
* floppy: 0x2b onboard Floppy
* power: 0x22 onboard power device (XXX unknown mask bit XXX)
*/
/* Code in entry.S needs to get at these register mappings. */
struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
struct sun4m_irq_global __iomem *sun4m_irq_global;
struct sun4m_handler_data {
bool percpu;
long mask;
};
/* Dave Redman (djhr@tadpole.co.uk)
* The sun4m interrupt registers.
*/
#define SUN4M_INT_ENABLE 0x80000000
#define SUN4M_INT_E14 0x00000080
#define SUN4M_INT_E10 0x00080000
#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
SUN4M_INT_M2S_WRITE_ERR | \
SUN4M_INT_ECC_ERR | \
SUN4M_INT_VME_ERR)
#define SUN4M_INT_SBUS(x) (1 << (x+7))
#define SUN4M_INT_VME(x) (1 << (x))
/* Interrupt levels used by OBP */
#define OBP_INT_LEVEL_SOFT 0x10
#define OBP_INT_LEVEL_ONBOARD 0x20
#define OBP_INT_LEVEL_SBUS 0x30
#define OBP_INT_LEVEL_VME 0x40
#define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
#define SUN4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14)
static unsigned long sun4m_imask[0x50] = {
/* 0x00 - SMP */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* 0x10 - soft */
0, SUN4M_SOFT_INT(1),
SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
/* 0x20 - onboard */
0, 0, 0, 0,
SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
/* 0x30 - sbus */
0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
0, SUN4M_INT_SBUS(6), 0, 0,
/* 0x40 - vme */
0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
0, SUN4M_INT_VME(6), 0, 0
};
static void sun4m_mask_irq(struct irq_data *data)
{
struct sun4m_handler_data *handler_data = data->handler_data;
int cpu = smp_processor_id();
if (handler_data->mask) {
unsigned long flags;
local_irq_save(flags);
if (handler_data->percpu) {
sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
} else {
sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
}
local_irq_restore(flags);
}
}
static void sun4m_unmask_irq(struct irq_data *data)
{
struct sun4m_handler_data *handler_data = data->handler_data;
int cpu = smp_processor_id();
if (handler_data->mask) {
unsigned long flags;
local_irq_save(flags);
if (handler_data->percpu) {
sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
} else {
sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
}
local_irq_restore(flags);
}
}
static unsigned int sun4m_startup_irq(struct irq_data *data)
{
irq_link(data->irq);
sun4m_unmask_irq(data);
return 0;
}
static void sun4m_shutdown_irq(struct irq_data *data)
{
sun4m_mask_irq(data);
irq_unlink(data->irq);
}
static struct irq_chip sun4m_irq = {
.name = "sun4m",
.irq_startup = sun4m_startup_irq,
.irq_shutdown = sun4m_shutdown_irq,
.irq_mask = sun4m_mask_irq,
.irq_unmask = sun4m_unmask_irq,
};
static unsigned int sun4m_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
struct sun4m_handler_data *handler_data;
unsigned int irq;
unsigned int pil;
if (real_irq >= OBP_INT_LEVEL_VME) {
prom_printf("Bogus sun4m IRQ %u\n", real_irq);
prom_halt();
}
pil = (real_irq & 0xf);
irq = irq_alloc(real_irq, pil);
if (irq == 0)
goto out;
handler_data = irq_get_handler_data(irq);
if (unlikely(handler_data))
goto out;
handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
if (unlikely(!handler_data)) {
prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
prom_halt();
}
handler_data->mask = sun4m_imask[real_irq];
handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
irq_set_chip_and_handler_name(irq, &sun4m_irq,
handle_level_irq, "level");
irq_set_handler_data(irq, handler_data);
out:
return irq;
}
struct sun4m_timer_percpu {
u32 l14_limit;
u32 l14_count;
u32 l14_limit_noclear;
u32 user_timer_start_stop;
};
static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
struct sun4m_timer_global {
u32 l10_limit;
u32 l10_count;
u32 l10_limit_noclear;
u32 reserved;
u32 timer_config;
};
static struct sun4m_timer_global __iomem *timers_global;
static void sun4m_clear_clock_irq(void)
{
sbus_readl(&timers_global->l10_limit);
}
void sun4m_nmi(struct pt_regs *regs)
{
unsigned long afsr, afar, si;
printk(KERN_ERR "Aieee: sun4m NMI received!\n");
/* XXX HyperSparc hack XXX */
__asm__ __volatile__("mov 0x500, %%g1\n\t"
"lda [%%g1] 0x4, %0\n\t"
"mov 0x600, %%g1\n\t"
"lda [%%g1] 0x4, %1\n\t" :
"=r" (afsr), "=r" (afar));
printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
si = sbus_readl(&sun4m_irq_global->pending);
printk(KERN_ERR "si=%08lx\n", si);
if (si & SUN4M_INT_MODULE_ERR)
printk(KERN_ERR "Module async error\n");
if (si & SUN4M_INT_M2S_WRITE_ERR)
printk(KERN_ERR "MBus/SBus async error\n");
if (si & SUN4M_INT_ECC_ERR)
printk(KERN_ERR "ECC memory error\n");
if (si & SUN4M_INT_VME_ERR)
printk(KERN_ERR "VME async error\n");
printk(KERN_ERR "you lose buddy boy...\n");
show_regs(regs);
prom_halt();
}
void sun4m_unmask_profile_irq(void)
{
unsigned long flags;
local_irq_save(flags);
sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
local_irq_restore(flags);
}
void sun4m_clear_profile_irq(int cpu)
{
sbus_readl(&timers_percpu[cpu]->l14_limit);
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
unsigned int value = limit ? timer_value(limit) : 0;
sbus_writel(value, &timers_percpu[cpu]->l14_limit);
}
static void __init sun4m_init_timers(void)
{
struct device_node *dp = of_find_node_by_name(NULL, "counter");
int i, err, len, num_cpu_timers;
unsigned int irq;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
return;
}
num_cpu_timers = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_timers; i++) {
timers_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
timers_global = (void __iomem *)
(unsigned long) addr[num_cpu_timers];
/* Every per-cpu timer works in timer mode */
sbus_writel(0x00000000, &timers_global->timer_config);
#ifdef CONFIG_SMP
sparc_config.cs_period = SBUS_CLOCK_RATE * 2; /* 2 seconds */
sparc_config.features |= FEAT_L14_ONESHOT;
#else
sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec */
sparc_config.features |= FEAT_L10_CLOCKEVENT;
#endif
sparc_config.features |= FEAT_L10_CLOCKSOURCE;
sbus_writel(timer_value(sparc_config.cs_period),
&timers_global->l10_limit);
master_l10_counter = &timers_global->l10_count;
irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
if (err) {
printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
err);
return;
}
for (i = 0; i < num_cpu_timers; i++)
sbus_writel(0, &timers_percpu[i]->l14_limit);
if (num_cpu_timers == 4)
sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
#ifdef CONFIG_SMP
{
unsigned long flags;
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_ops->cache_all();
local_irq_restore(flags);
}
#endif
}
void __init sun4m_init_IRQ(void)
{
struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
int len, i, mid, num_cpu_iregs;
const u32 *addr;
if (!dp) {
printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
return;
}
addr = of_get_property(dp, "address", &len);
of_node_put(dp);
if (!addr) {
printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
return;
}
num_cpu_iregs = (len / sizeof(u32)) - 1;
for (i = 0; i < num_cpu_iregs; i++) {
sun4m_irq_percpu[i] = (void __iomem *)
(unsigned long) addr[i];
}
sun4m_irq_global = (void __iomem *)
(unsigned long) addr[num_cpu_iregs];
local_irq_disable();
sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
if (num_cpu_iregs == 4)
sbus_writel(0, &sun4m_irq_global->interrupt_target);
sparc_config.init_timers = sun4m_init_timers;
sparc_config.build_device_irq = sun4m_build_device_irq;
sparc_config.clock_rate = SBUS_CLOCK_RATE;
sparc_config.clear_clock_irq = sun4m_clear_clock_irq;
sparc_config.load_profile_irq = sun4m_load_profile_irq;
/* Cannot enable interrupts until OBP ticker is disabled. */
}