Cosmin Tanislav 1b926914bb iio: accel: adxl367: fix DEVID read after reset ... regmap_read_poll_timeout() will not sleep before reading, causing the first read to return -ENXIO on I2C, since the chip does not respond to it while it is being reset. The datasheet specifies that a soft reset operation has a latency of 7.5ms. Add a 15ms sleep between reset and reading the DEVID register, and switch to a simple regmap_read() call. Fixes: cbab791c5e ("iio: accel: add ADXL367 driver") Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240207033657.206171-1-demonsingur@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2024-02-25 14:30:45 +00:00
..
accel	iio: accel: adxl367: fix DEVID read after reset	2024-02-25 14:30:45 +00:00
adc	iio: adc: ad4130: only set GPIO_CTRL if pin is unused	2024-02-10 16:52:39 +00:00
addac	IIO: 1st set of new device support, features and cleanup for 6.7	2023-10-20 07:54:15 +02:00
afe	iio: afe: rescale: Accept only offset channels	2023-10-17 20:25:32 +01:00
amplifiers	iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator	2023-11-26 16:36:53 +00:00
buffer	Char/Misc and other Driver changes for 6.8-rc1	2024-01-17 16:47:17 -08:00
cdc	iio: cdc: ad7150: relax return value check for IRQ get	2023-08-01 18:55:55 +01:00
chemical	TTY/Serial changes for 6.8-rc1	2024-01-18 11:37:24 -08:00
common	iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table	2023-11-16 19:35:41 +00:00
dac	iio: dac: driver for MCP4821	2023-12-21 17:04:42 +00:00
dummy
filter	drivers: iio: filter: admv8818: add bypass mode	2023-08-08 09:51:06 +01:00
frequency	iio: frequency: admv1014: Switch to device_property_match_property_string()	2023-11-16 19:10:26 +00:00
gyro	iio: gyro: hid-sensor-gyro-3d: Convert to platform remove callback returning void	2023-09-23 15:06:55 +01:00
health	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
humidity	iio: humidity: hdc3020: fix temperature offset	2024-01-27 14:40:07 +00:00
imu	iio: imu: inv_mpu6050: fix frequency setting when chip is off	2024-02-25 11:42:12 +00:00
light	iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP	2024-02-04 14:02:16 +00:00
magnetometer	iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC	2024-01-22 18:59:06 +00:00
multiplexer
orientation	iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void	2023-09-23 15:06:56 +01:00
position	iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void	2023-09-23 15:06:56 +01:00
potentiometer	iio: potentiometer: ad5110: Use i2c_get_match_data()	2023-09-12 10:42:03 +01:00
potentiostat	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
pressure	iio: pressure: dlhl60d: Initialize empty DLH bytes	2024-02-25 12:11:31 +00:00
proximity	iio: proximity: irsd200: Drop unused include	2023-12-04 13:24:42 +00:00
resolver	iio: resolver: ad2s1210: add reset gpio support	2023-11-16 19:10:25 +00:00
temperature	iio: temperature: mlx90635 MLX90635 IR Temperature sensor	2023-12-11 19:16:34 +00:00
test
trigger	iio: trigger: stm32-timer: Convert to platform remove callback returning void	2023-09-23 15:06:56 +01:00
iio_core_trigger.h
iio_core.h	iio: Remove unused declarations	2023-09-12 10:42:03 +01:00
industrialio-buffer.c	iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0	2023-12-21 10:48:29 +00:00
industrialio-configfs.c
industrialio-core.c	iio: core: fix memleak in iio_device_register_sysfs	2024-01-22 18:59:06 +00:00
industrialio-event.c	iio: event: add optional event label support	2023-10-11 15:54:41 +01:00
industrialio-gts-helper.c	iio: gts-helpers: fix integration time units	2023-05-13 17:54:57 +01:00
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio: Make return value check for set_trigger_state() consistent	2023-07-20 19:21:30 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: Add a helper to query an available minimum raw value	2023-07-09 22:48:17 +01:00
Kconfig	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
Makefile	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
TODO