linux/net/dsa/master.c
Vivien Didelot 48e2331197 net: dsa: dump CPU port regs through master
Merge the CPU port registers dump into the master interface registers
dump through ethtool, by nesting the ethtool_drvinfo and ethtool_regs
structures of the CPU port into the dump.

drvinfo->regdump_len will contain the full data length, while regs->len
will contain only the master interface registers dump length.

This allows for example to dump the CPU port registers on a ZII Dev
C board like this:

    # ethtool -d eth1
    0x004:                                              0x00000000
    0x008:                                              0x0a8000aa
    0x010:                                              0x01000000
    0x014:                                              0x00000000
    0x024:                                              0xf0000102
    0x040:                                              0x6d82c800
    0x044:                                              0x00000020
    0x064:                                              0x40000000
    0x084: RCR (Receive Control Register)               0x47c00104
        MAX_FL (Maximum frame length)                   1984
        FCE (Flow control enable)                       0
        BC_REJ (Broadcast frame reject)                 0
        PROM (Promiscuous mode)                         0
        DRT (Disable receive on transmit)               0
        LOOP (Internal loopback)                        0
    0x0c4: TCR (Transmit Control Register)              0x00000004
        RFC_PAUSE (Receive frame control pause)         0
        TFC_PAUSE (Transmit frame control pause)        0
        FDEN (Full duplex enable)                       1
        HBC (Heartbeat control)                         0
        GTS (Graceful transmit stop)                    0
    0x0e4:                                              0x76735d6d
    0x0e8:                                              0x7e9e8808
    0x0ec:                                              0x00010000
    .
    .
    .
    88E6352  Switch Port Registers
    ------------------------------
    00: Port Status                            0x4d04
          Pause Enabled                        0
          My Pause                             1
          802.3 PHY Detected                   0
          Link Status                          Up
          Duplex                               Full
          Speed                                100 or 200 Mbps
          EEE Enabled                          0
          Transmitter Paused                   0
          Flow Control                         0
          Config Mode                          0x4
    01: Physical Control                       0x003d
          RGMII Receive Timing Control         Default
          RGMII Transmit Timing Control        Default
          200 BASE Mode                        100
          Flow Control's Forced value          0
          Force Flow Control                   0
          Link's Forced value                  Up
          Force Link                           1
          Duplex's Forced value                Full
          Force Duplex                         1
          Force Speed                          100 or 200 Mbps
    .
    .
    .

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 14:08:32 -07:00

367 lines
9.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Handling of a master device, switching frames via its switch fabric CPU port
*
* Copyright (c) 2017 Savoir-faire Linux Inc.
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*/
#include "dsa_priv.h"
static int dsa_master_get_regs_len(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int ret = 0;
int len;
if (ops->get_regs_len) {
len = ops->get_regs_len(dev);
if (len < 0)
return len;
ret += len;
}
ret += sizeof(struct ethtool_drvinfo);
ret += sizeof(struct ethtool_regs);
if (ds->ops->get_regs_len) {
len = ds->ops->get_regs_len(ds, port);
if (len < 0)
return len;
ret += len;
}
return ret;
}
static void dsa_master_get_regs(struct net_device *dev,
struct ethtool_regs *regs, void *data)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
struct ethtool_drvinfo *cpu_info;
struct ethtool_regs *cpu_regs;
int port = cpu_dp->index;
int len;
if (ops->get_regs_len && ops->get_regs) {
len = ops->get_regs_len(dev);
if (len < 0)
return;
regs->len = len;
ops->get_regs(dev, regs, data);
data += regs->len;
}
cpu_info = (struct ethtool_drvinfo *)data;
strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
data += sizeof(*cpu_info);
cpu_regs = (struct ethtool_regs *)data;
data += sizeof(*cpu_regs);
if (ds->ops->get_regs_len && ds->ops->get_regs) {
len = ds->ops->get_regs_len(ds, port);
if (len < 0)
return;
cpu_regs->len = len;
ds->ops->get_regs(ds, port, cpu_regs, data);
}
}
static void dsa_master_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int count = 0;
if (ops->get_sset_count && ops->get_ethtool_stats) {
count = ops->get_sset_count(dev, ETH_SS_STATS);
ops->get_ethtool_stats(dev, stats, data);
}
if (ds->ops->get_ethtool_stats)
ds->ops->get_ethtool_stats(ds, port, data + count);
}
static void dsa_master_get_ethtool_phy_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int count = 0;
if (dev->phydev && !ops->get_ethtool_phy_stats) {
count = phy_ethtool_get_sset_count(dev->phydev);
if (count >= 0)
phy_ethtool_get_stats(dev->phydev, stats, data);
} else if (ops->get_sset_count && ops->get_ethtool_phy_stats) {
count = ops->get_sset_count(dev, ETH_SS_PHY_STATS);
ops->get_ethtool_phy_stats(dev, stats, data);
}
if (count < 0)
count = 0;
if (ds->ops->get_ethtool_phy_stats)
ds->ops->get_ethtool_phy_stats(ds, port, data + count);
}
static int dsa_master_get_sset_count(struct net_device *dev, int sset)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int count = 0;
if (sset == ETH_SS_PHY_STATS && dev->phydev &&
!ops->get_ethtool_phy_stats)
count = phy_ethtool_get_sset_count(dev->phydev);
else if (ops->get_sset_count)
count = ops->get_sset_count(dev, sset);
if (count < 0)
count = 0;
if (ds->ops->get_sset_count)
count += ds->ops->get_sset_count(ds, cpu_dp->index, sset);
return count;
}
static void dsa_master_get_strings(struct net_device *dev, uint32_t stringset,
uint8_t *data)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int len = ETH_GSTRING_LEN;
int mcount = 0, count;
unsigned int i;
uint8_t pfx[4];
uint8_t *ndata;
snprintf(pfx, sizeof(pfx), "p%.2d", port);
/* We do not want to be NULL-terminated, since this is a prefix */
pfx[sizeof(pfx) - 1] = '_';
if (stringset == ETH_SS_PHY_STATS && dev->phydev &&
!ops->get_ethtool_phy_stats) {
mcount = phy_ethtool_get_sset_count(dev->phydev);
if (mcount < 0)
mcount = 0;
else
phy_ethtool_get_strings(dev->phydev, data);
} else if (ops->get_sset_count && ops->get_strings) {
mcount = ops->get_sset_count(dev, stringset);
if (mcount < 0)
mcount = 0;
ops->get_strings(dev, stringset, data);
}
if (ds->ops->get_strings) {
ndata = data + mcount * len;
/* This function copies ETH_GSTRINGS_LEN bytes, we will mangle
* the output after to prepend our CPU port prefix we
* constructed earlier
*/
ds->ops->get_strings(ds, port, stringset, ndata);
count = ds->ops->get_sset_count(ds, port, stringset);
for (i = 0; i < count; i++) {
memmove(ndata + (i * len + sizeof(pfx)),
ndata + i * len, len - sizeof(pfx));
memcpy(ndata + i * len, pfx, sizeof(pfx));
}
}
}
static int dsa_master_get_phys_port_name(struct net_device *dev,
char *name, size_t len)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
if (snprintf(name, len, "p%d", cpu_dp->index) >= len)
return -EINVAL;
return 0;
}
static int dsa_master_ethtool_setup(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
struct dsa_switch *ds = cpu_dp->ds;
struct ethtool_ops *ops;
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
if (!ops)
return -ENOMEM;
cpu_dp->orig_ethtool_ops = dev->ethtool_ops;
if (cpu_dp->orig_ethtool_ops)
memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
ops->get_regs_len = dsa_master_get_regs_len;
ops->get_regs = dsa_master_get_regs;
ops->get_sset_count = dsa_master_get_sset_count;
ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
ops->get_strings = dsa_master_get_strings;
ops->get_ethtool_phy_stats = dsa_master_get_ethtool_phy_stats;
dev->ethtool_ops = ops;
return 0;
}
static void dsa_master_ethtool_teardown(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
dev->ethtool_ops = cpu_dp->orig_ethtool_ops;
cpu_dp->orig_ethtool_ops = NULL;
}
static int dsa_master_ndo_setup(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
struct dsa_switch *ds = cpu_dp->ds;
struct net_device_ops *ops;
if (dev->netdev_ops->ndo_get_phys_port_name)
return 0;
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
if (!ops)
return -ENOMEM;
cpu_dp->orig_ndo_ops = dev->netdev_ops;
if (cpu_dp->orig_ndo_ops)
memcpy(ops, cpu_dp->orig_ndo_ops, sizeof(*ops));
ops->ndo_get_phys_port_name = dsa_master_get_phys_port_name;
dev->netdev_ops = ops;
return 0;
}
static void dsa_master_ndo_teardown(struct net_device *dev)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
dev->netdev_ops = cpu_dp->orig_ndo_ops;
cpu_dp->orig_ndo_ops = NULL;
}
static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
char *buf)
{
struct net_device *dev = to_net_dev(d);
struct dsa_port *cpu_dp = dev->dsa_ptr;
return sprintf(buf, "%s\n",
dsa_tag_protocol_to_str(cpu_dp->tag_ops));
}
static DEVICE_ATTR_RO(tagging);
static struct attribute *dsa_slave_attrs[] = {
&dev_attr_tagging.attr,
NULL
};
static const struct attribute_group dsa_group = {
.name = "dsa",
.attrs = dsa_slave_attrs,
};
static void dsa_master_set_mtu(struct net_device *dev, struct dsa_port *cpu_dp)
{
unsigned int mtu = ETH_DATA_LEN + cpu_dp->tag_ops->overhead;
int err;
rtnl_lock();
if (mtu <= dev->max_mtu) {
err = dev_set_mtu(dev, mtu);
if (err)
netdev_dbg(dev, "Unable to set MTU to include for DSA overheads\n");
}
rtnl_unlock();
}
static void dsa_master_reset_mtu(struct net_device *dev)
{
int err;
rtnl_lock();
err = dev_set_mtu(dev, ETH_DATA_LEN);
if (err)
netdev_dbg(dev,
"Unable to reset MTU to exclude DSA overheads\n");
rtnl_unlock();
}
static struct lock_class_key dsa_master_addr_list_lock_key;
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
{
int ret;
dsa_master_set_mtu(dev, cpu_dp);
/* If we use a tagging format that doesn't have an ethertype
* field, make sure that all packets from this point on get
* sent to the tag format's receive function.
*/
wmb();
dev->dsa_ptr = cpu_dp;
lockdep_set_class(&dev->addr_list_lock,
&dsa_master_addr_list_lock_key);
ret = dsa_master_ethtool_setup(dev);
if (ret)
return ret;
ret = dsa_master_ndo_setup(dev);
if (ret)
goto out_err_ethtool_teardown;
ret = sysfs_create_group(&dev->dev.kobj, &dsa_group);
if (ret)
goto out_err_ndo_teardown;
return ret;
out_err_ndo_teardown:
dsa_master_ndo_teardown(dev);
out_err_ethtool_teardown:
dsa_master_ethtool_teardown(dev);
return ret;
}
void dsa_master_teardown(struct net_device *dev)
{
sysfs_remove_group(&dev->dev.kobj, &dsa_group);
dsa_master_ndo_teardown(dev);
dsa_master_ethtool_teardown(dev);
dsa_master_reset_mtu(dev);
dev->dsa_ptr = NULL;
/* If we used a tagging format that doesn't have an ethertype
* field, make sure that all packets from this point get sent
* without the tag and go through the regular receive path.
*/
wmb();
}