linux/drivers/iio/pressure/ms5611.h
Lars-Peter Clausen dc19fa63ad iio: ms5611: Simplify IO callback parameters
The ms5611 passes &indio_dev->dev as a parameter to all its IO callbacks
only to directly cast the struct device back to struct iio_dev. And the
struct iio_dev is then only used to get the drivers state struct.

Simplify this a bit by passing the state struct directly. This makes it a
bit easier to follow what the code is doing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211020142110.7060-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-17 17:51:33 +00:00

67 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* MS5611 pressure and temperature sensor driver
*
* Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
*
*/
#ifndef _MS5611_H
#define _MS5611_H
#include <linux/device.h>
#include <linux/iio/iio.h>
#include <linux/mutex.h>
struct regulator;
#define MS5611_RESET 0x1e
#define MS5611_READ_ADC 0x00
#define MS5611_READ_PROM_WORD 0xA0
#define MS5611_PROM_WORDS_NB 8
enum {
MS5611,
MS5607,
};
struct ms5611_chip_info {
u16 prom[MS5611_PROM_WORDS_NB];
int (*temp_and_pressure_compensate)(struct ms5611_chip_info *chip_info,
s32 *temp, s32 *pressure);
};
/*
* OverSampling Rate descriptor.
* Warning: cmd MUST be kept aligned on a word boundary (see
* m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
*/
struct ms5611_osr {
unsigned long conv_usec;
u8 cmd;
unsigned short rate;
};
struct ms5611_state {
void *client;
struct mutex lock;
const struct ms5611_osr *pressure_osr;
const struct ms5611_osr *temp_osr;
int (*reset)(struct ms5611_state *st);
int (*read_prom_word)(struct ms5611_state *st, int index, u16 *word);
int (*read_adc_temp_and_pressure)(struct ms5611_state *st,
s32 *temp, s32 *pressure);
struct ms5611_chip_info *chip_info;
struct regulator *vdd;
};
int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
const char *name, int type);
void ms5611_remove(struct iio_dev *indio_dev);
#endif /* _MS5611_H */