mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 14:11:52 +00:00
35e6dbfe18
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB.
The DDR host interface has a contiguous memory so while injecting
errors, the driver should remove the hole else the injection fails as
the address translation is incorrect.
Introduce a get_mem_info() function pointer and set it for Zynq
UltraScale+ platform to return host address.
Fixes: 1a81361f75
("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
1499 lines
39 KiB
C
1499 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Synopsys DDR ECC Driver
|
|
* This driver is based on ppc4xx_edac.c drivers
|
|
*
|
|
* Copyright (C) 2012 - 2014 Xilinx, Inc.
|
|
*/
|
|
|
|
#include <linux/edac.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
|
|
#include "edac_module.h"
|
|
|
|
/* Number of cs_rows needed per memory controller */
|
|
#define SYNPS_EDAC_NR_CSROWS 1
|
|
|
|
/* Number of channels per memory controller */
|
|
#define SYNPS_EDAC_NR_CHANS 1
|
|
|
|
/* Granularity of reported error in bytes */
|
|
#define SYNPS_EDAC_ERR_GRAIN 1
|
|
|
|
#define SYNPS_EDAC_MSG_SIZE 256
|
|
|
|
#define SYNPS_EDAC_MOD_STRING "synps_edac"
|
|
#define SYNPS_EDAC_MOD_VER "1"
|
|
|
|
/* Synopsys DDR memory controller registers that are relevant to ECC */
|
|
#define CTRL_OFST 0x0
|
|
#define T_ZQ_OFST 0xA4
|
|
|
|
/* ECC control register */
|
|
#define ECC_CTRL_OFST 0xC4
|
|
/* ECC log register */
|
|
#define CE_LOG_OFST 0xC8
|
|
/* ECC address register */
|
|
#define CE_ADDR_OFST 0xCC
|
|
/* ECC data[31:0] register */
|
|
#define CE_DATA_31_0_OFST 0xD0
|
|
|
|
/* Uncorrectable error info registers */
|
|
#define UE_LOG_OFST 0xDC
|
|
#define UE_ADDR_OFST 0xE0
|
|
#define UE_DATA_31_0_OFST 0xE4
|
|
|
|
#define STAT_OFST 0xF0
|
|
#define SCRUB_OFST 0xF4
|
|
|
|
/* Control register bit field definitions */
|
|
#define CTRL_BW_MASK 0xC
|
|
#define CTRL_BW_SHIFT 2
|
|
|
|
#define DDRCTL_WDTH_16 1
|
|
#define DDRCTL_WDTH_32 0
|
|
|
|
/* ZQ register bit field definitions */
|
|
#define T_ZQ_DDRMODE_MASK 0x2
|
|
|
|
/* ECC control register bit field definitions */
|
|
#define ECC_CTRL_CLR_CE_ERR 0x2
|
|
#define ECC_CTRL_CLR_UE_ERR 0x1
|
|
|
|
/* ECC correctable/uncorrectable error log register definitions */
|
|
#define LOG_VALID 0x1
|
|
#define CE_LOG_BITPOS_MASK 0xFE
|
|
#define CE_LOG_BITPOS_SHIFT 1
|
|
|
|
/* ECC correctable/uncorrectable error address register definitions */
|
|
#define ADDR_COL_MASK 0xFFF
|
|
#define ADDR_ROW_MASK 0xFFFF000
|
|
#define ADDR_ROW_SHIFT 12
|
|
#define ADDR_BANK_MASK 0x70000000
|
|
#define ADDR_BANK_SHIFT 28
|
|
|
|
/* ECC statistic register definitions */
|
|
#define STAT_UECNT_MASK 0xFF
|
|
#define STAT_CECNT_MASK 0xFF00
|
|
#define STAT_CECNT_SHIFT 8
|
|
|
|
/* ECC scrub register definitions */
|
|
#define SCRUB_MODE_MASK 0x7
|
|
#define SCRUB_MODE_SECDED 0x4
|
|
|
|
/* DDR ECC Quirks */
|
|
#define DDR_ECC_INTR_SUPPORT BIT(0)
|
|
#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
|
|
#define DDR_ECC_INTR_SELF_CLEAR BIT(2)
|
|
|
|
/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
|
|
/* ECC Configuration Registers */
|
|
#define ECC_CFG0_OFST 0x70
|
|
#define ECC_CFG1_OFST 0x74
|
|
|
|
/* ECC Status Register */
|
|
#define ECC_STAT_OFST 0x78
|
|
|
|
/* ECC Clear Register */
|
|
#define ECC_CLR_OFST 0x7C
|
|
|
|
/* ECC Error count Register */
|
|
#define ECC_ERRCNT_OFST 0x80
|
|
|
|
/* ECC Corrected Error Address Register */
|
|
#define ECC_CEADDR0_OFST 0x84
|
|
#define ECC_CEADDR1_OFST 0x88
|
|
|
|
/* ECC Syndrome Registers */
|
|
#define ECC_CSYND0_OFST 0x8C
|
|
#define ECC_CSYND1_OFST 0x90
|
|
#define ECC_CSYND2_OFST 0x94
|
|
|
|
/* ECC Bit Mask0 Address Register */
|
|
#define ECC_BITMASK0_OFST 0x98
|
|
#define ECC_BITMASK1_OFST 0x9C
|
|
#define ECC_BITMASK2_OFST 0xA0
|
|
|
|
/* ECC UnCorrected Error Address Register */
|
|
#define ECC_UEADDR0_OFST 0xA4
|
|
#define ECC_UEADDR1_OFST 0xA8
|
|
|
|
/* ECC Syndrome Registers */
|
|
#define ECC_UESYND0_OFST 0xAC
|
|
#define ECC_UESYND1_OFST 0xB0
|
|
#define ECC_UESYND2_OFST 0xB4
|
|
|
|
/* ECC Poison Address Reg */
|
|
#define ECC_POISON0_OFST 0xB8
|
|
#define ECC_POISON1_OFST 0xBC
|
|
|
|
#define ECC_ADDRMAP0_OFFSET 0x200
|
|
|
|
/* Control register bitfield definitions */
|
|
#define ECC_CTRL_BUSWIDTH_MASK 0x3000
|
|
#define ECC_CTRL_BUSWIDTH_SHIFT 12
|
|
#define ECC_CTRL_CLR_CE_ERRCNT BIT(2)
|
|
#define ECC_CTRL_CLR_UE_ERRCNT BIT(3)
|
|
|
|
/* DDR Control Register width definitions */
|
|
#define DDRCTL_EWDTH_16 2
|
|
#define DDRCTL_EWDTH_32 1
|
|
#define DDRCTL_EWDTH_64 0
|
|
|
|
/* ECC status register definitions */
|
|
#define ECC_STAT_UECNT_MASK 0xF0000
|
|
#define ECC_STAT_UECNT_SHIFT 16
|
|
#define ECC_STAT_CECNT_MASK 0xF00
|
|
#define ECC_STAT_CECNT_SHIFT 8
|
|
#define ECC_STAT_BITNUM_MASK 0x7F
|
|
|
|
/* ECC error count register definitions */
|
|
#define ECC_ERRCNT_UECNT_MASK 0xFFFF0000
|
|
#define ECC_ERRCNT_UECNT_SHIFT 16
|
|
#define ECC_ERRCNT_CECNT_MASK 0xFFFF
|
|
|
|
/* DDR QOS Interrupt register definitions */
|
|
#define DDR_QOS_IRQ_STAT_OFST 0x20200
|
|
#define DDR_QOSUE_MASK 0x4
|
|
#define DDR_QOSCE_MASK 0x2
|
|
#define ECC_CE_UE_INTR_MASK 0x6
|
|
#define DDR_QOS_IRQ_EN_OFST 0x20208
|
|
#define DDR_QOS_IRQ_DB_OFST 0x2020C
|
|
|
|
/* DDR QOS Interrupt register definitions */
|
|
#define DDR_UE_MASK BIT(9)
|
|
#define DDR_CE_MASK BIT(8)
|
|
|
|
/* ECC Corrected Error Register Mask and Shifts*/
|
|
#define ECC_CEADDR0_RW_MASK 0x3FFFF
|
|
#define ECC_CEADDR0_RNK_MASK BIT(24)
|
|
#define ECC_CEADDR1_BNKGRP_MASK 0x3000000
|
|
#define ECC_CEADDR1_BNKNR_MASK 0x70000
|
|
#define ECC_CEADDR1_BLKNR_MASK 0xFFF
|
|
#define ECC_CEADDR1_BNKGRP_SHIFT 24
|
|
#define ECC_CEADDR1_BNKNR_SHIFT 16
|
|
|
|
/* ECC Poison register shifts */
|
|
#define ECC_POISON0_RANK_SHIFT 24
|
|
#define ECC_POISON0_RANK_MASK BIT(24)
|
|
#define ECC_POISON0_COLUMN_SHIFT 0
|
|
#define ECC_POISON0_COLUMN_MASK 0xFFF
|
|
#define ECC_POISON1_BG_SHIFT 28
|
|
#define ECC_POISON1_BG_MASK 0x30000000
|
|
#define ECC_POISON1_BANKNR_SHIFT 24
|
|
#define ECC_POISON1_BANKNR_MASK 0x7000000
|
|
#define ECC_POISON1_ROW_SHIFT 0
|
|
#define ECC_POISON1_ROW_MASK 0x3FFFF
|
|
|
|
/* DDR Memory type defines */
|
|
#define MEM_TYPE_DDR3 0x1
|
|
#define MEM_TYPE_LPDDR3 0x8
|
|
#define MEM_TYPE_DDR2 0x4
|
|
#define MEM_TYPE_DDR4 0x10
|
|
#define MEM_TYPE_LPDDR4 0x20
|
|
|
|
/* DDRC Software control register */
|
|
#define DDRC_SWCTL 0x320
|
|
|
|
/* DDRC ECC CE & UE poison mask */
|
|
#define ECC_CEPOISON_MASK 0x3
|
|
#define ECC_UEPOISON_MASK 0x1
|
|
|
|
/* DDRC Device config masks */
|
|
#define DDRC_MSTR_CFG_MASK 0xC0000000
|
|
#define DDRC_MSTR_CFG_SHIFT 30
|
|
#define DDRC_MSTR_CFG_X4_MASK 0x0
|
|
#define DDRC_MSTR_CFG_X8_MASK 0x1
|
|
#define DDRC_MSTR_CFG_X16_MASK 0x2
|
|
#define DDRC_MSTR_CFG_X32_MASK 0x3
|
|
|
|
#define DDR_MAX_ROW_SHIFT 18
|
|
#define DDR_MAX_COL_SHIFT 14
|
|
#define DDR_MAX_BANK_SHIFT 3
|
|
#define DDR_MAX_BANKGRP_SHIFT 2
|
|
|
|
#define ROW_MAX_VAL_MASK 0xF
|
|
#define COL_MAX_VAL_MASK 0xF
|
|
#define BANK_MAX_VAL_MASK 0x1F
|
|
#define BANKGRP_MAX_VAL_MASK 0x1F
|
|
#define RANK_MAX_VAL_MASK 0x1F
|
|
|
|
#define ROW_B0_BASE 6
|
|
#define ROW_B1_BASE 7
|
|
#define ROW_B2_BASE 8
|
|
#define ROW_B3_BASE 9
|
|
#define ROW_B4_BASE 10
|
|
#define ROW_B5_BASE 11
|
|
#define ROW_B6_BASE 12
|
|
#define ROW_B7_BASE 13
|
|
#define ROW_B8_BASE 14
|
|
#define ROW_B9_BASE 15
|
|
#define ROW_B10_BASE 16
|
|
#define ROW_B11_BASE 17
|
|
#define ROW_B12_BASE 18
|
|
#define ROW_B13_BASE 19
|
|
#define ROW_B14_BASE 20
|
|
#define ROW_B15_BASE 21
|
|
#define ROW_B16_BASE 22
|
|
#define ROW_B17_BASE 23
|
|
|
|
#define COL_B2_BASE 2
|
|
#define COL_B3_BASE 3
|
|
#define COL_B4_BASE 4
|
|
#define COL_B5_BASE 5
|
|
#define COL_B6_BASE 6
|
|
#define COL_B7_BASE 7
|
|
#define COL_B8_BASE 8
|
|
#define COL_B9_BASE 9
|
|
#define COL_B10_BASE 10
|
|
#define COL_B11_BASE 11
|
|
#define COL_B12_BASE 12
|
|
#define COL_B13_BASE 13
|
|
|
|
#define BANK_B0_BASE 2
|
|
#define BANK_B1_BASE 3
|
|
#define BANK_B2_BASE 4
|
|
|
|
#define BANKGRP_B0_BASE 2
|
|
#define BANKGRP_B1_BASE 3
|
|
|
|
#define RANK_B0_BASE 6
|
|
|
|
/**
|
|
* struct ecc_error_info - ECC error log information.
|
|
* @row: Row number.
|
|
* @col: Column number.
|
|
* @bank: Bank number.
|
|
* @bitpos: Bit position.
|
|
* @data: Data causing the error.
|
|
* @bankgrpnr: Bank group number.
|
|
* @blknr: Block number.
|
|
*/
|
|
struct ecc_error_info {
|
|
u32 row;
|
|
u32 col;
|
|
u32 bank;
|
|
u32 bitpos;
|
|
u32 data;
|
|
u32 bankgrpnr;
|
|
u32 blknr;
|
|
};
|
|
|
|
/**
|
|
* struct synps_ecc_status - ECC status information to report.
|
|
* @ce_cnt: Correctable error count.
|
|
* @ue_cnt: Uncorrectable error count.
|
|
* @ceinfo: Correctable error log information.
|
|
* @ueinfo: Uncorrectable error log information.
|
|
*/
|
|
struct synps_ecc_status {
|
|
u32 ce_cnt;
|
|
u32 ue_cnt;
|
|
struct ecc_error_info ceinfo;
|
|
struct ecc_error_info ueinfo;
|
|
};
|
|
|
|
/**
|
|
* struct synps_edac_priv - DDR memory controller private instance data.
|
|
* @baseaddr: Base address of the DDR controller.
|
|
* @reglock: Concurrent CSRs access lock.
|
|
* @message: Buffer for framing the event specific info.
|
|
* @stat: ECC status information.
|
|
* @p_data: Platform data.
|
|
* @ce_cnt: Correctable Error count.
|
|
* @ue_cnt: Uncorrectable Error count.
|
|
* @poison_addr: Data poison address.
|
|
* @row_shift: Bit shifts for row bit.
|
|
* @col_shift: Bit shifts for column bit.
|
|
* @bank_shift: Bit shifts for bank bit.
|
|
* @bankgrp_shift: Bit shifts for bank group bit.
|
|
* @rank_shift: Bit shifts for rank bit.
|
|
*/
|
|
struct synps_edac_priv {
|
|
void __iomem *baseaddr;
|
|
spinlock_t reglock;
|
|
char message[SYNPS_EDAC_MSG_SIZE];
|
|
struct synps_ecc_status stat;
|
|
const struct synps_platform_data *p_data;
|
|
u32 ce_cnt;
|
|
u32 ue_cnt;
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
ulong poison_addr;
|
|
u32 row_shift[18];
|
|
u32 col_shift[14];
|
|
u32 bank_shift[3];
|
|
u32 bankgrp_shift[2];
|
|
u32 rank_shift[1];
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* struct synps_platform_data - synps platform data structure.
|
|
* @get_error_info: Get EDAC error info.
|
|
* @get_mtype: Get mtype.
|
|
* @get_dtype: Get dtype.
|
|
* @get_ecc_state: Get ECC state.
|
|
* @get_mem_info: Get EDAC memory info
|
|
* @quirks: To differentiate IPs.
|
|
*/
|
|
struct synps_platform_data {
|
|
int (*get_error_info)(struct synps_edac_priv *priv);
|
|
enum mem_type (*get_mtype)(const void __iomem *base);
|
|
enum dev_type (*get_dtype)(const void __iomem *base);
|
|
bool (*get_ecc_state)(void __iomem *base);
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
u64 (*get_mem_info)(struct synps_edac_priv *priv);
|
|
#endif
|
|
int quirks;
|
|
};
|
|
|
|
/**
|
|
* zynq_get_error_info - Get the current ECC error info.
|
|
* @priv: DDR memory controller private instance data.
|
|
*
|
|
* Return: one if there is no error, otherwise zero.
|
|
*/
|
|
static int zynq_get_error_info(struct synps_edac_priv *priv)
|
|
{
|
|
struct synps_ecc_status *p;
|
|
u32 regval, clearval = 0;
|
|
void __iomem *base;
|
|
|
|
base = priv->baseaddr;
|
|
p = &priv->stat;
|
|
|
|
regval = readl(base + STAT_OFST);
|
|
if (!regval)
|
|
return 1;
|
|
|
|
p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
|
|
p->ue_cnt = regval & STAT_UECNT_MASK;
|
|
|
|
regval = readl(base + CE_LOG_OFST);
|
|
if (!(p->ce_cnt && (regval & LOG_VALID)))
|
|
goto ue_err;
|
|
|
|
p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
|
|
regval = readl(base + CE_ADDR_OFST);
|
|
p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
|
|
p->ceinfo.col = regval & ADDR_COL_MASK;
|
|
p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
|
|
p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
|
|
edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos,
|
|
p->ceinfo.data);
|
|
clearval = ECC_CTRL_CLR_CE_ERR;
|
|
|
|
ue_err:
|
|
regval = readl(base + UE_LOG_OFST);
|
|
if (!(p->ue_cnt && (regval & LOG_VALID)))
|
|
goto out;
|
|
|
|
regval = readl(base + UE_ADDR_OFST);
|
|
p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
|
|
p->ueinfo.col = regval & ADDR_COL_MASK;
|
|
p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
|
|
p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
|
|
clearval |= ECC_CTRL_CLR_UE_ERR;
|
|
|
|
out:
|
|
writel(clearval, base + ECC_CTRL_OFST);
|
|
writel(0x0, base + ECC_CTRL_OFST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
/**
|
|
* zynqmp_get_mem_info - Get the current memory info.
|
|
* @priv: DDR memory controller private instance data.
|
|
*
|
|
* Return: host interface address.
|
|
*/
|
|
static u64 zynqmp_get_mem_info(struct synps_edac_priv *priv)
|
|
{
|
|
u64 hif_addr = 0, linear_addr;
|
|
|
|
linear_addr = priv->poison_addr;
|
|
if (linear_addr >= SZ_32G)
|
|
linear_addr = linear_addr - SZ_32G + SZ_2G;
|
|
hif_addr = linear_addr >> 3;
|
|
return hif_addr;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* zynqmp_get_error_info - Get the current ECC error info.
|
|
* @priv: DDR memory controller private instance data.
|
|
*
|
|
* Return: one if there is no error otherwise returns zero.
|
|
*/
|
|
static int zynqmp_get_error_info(struct synps_edac_priv *priv)
|
|
{
|
|
struct synps_ecc_status *p;
|
|
u32 regval, clearval;
|
|
unsigned long flags;
|
|
void __iomem *base;
|
|
|
|
base = priv->baseaddr;
|
|
p = &priv->stat;
|
|
|
|
regval = readl(base + ECC_ERRCNT_OFST);
|
|
p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
|
|
p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
|
|
if (!p->ce_cnt)
|
|
goto ue_err;
|
|
|
|
regval = readl(base + ECC_STAT_OFST);
|
|
if (!regval)
|
|
return 1;
|
|
|
|
p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
|
|
|
|
regval = readl(base + ECC_CEADDR0_OFST);
|
|
p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK);
|
|
regval = readl(base + ECC_CEADDR1_OFST);
|
|
p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
|
|
ECC_CEADDR1_BNKNR_SHIFT;
|
|
p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
|
|
ECC_CEADDR1_BNKGRP_SHIFT;
|
|
p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
|
|
p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
|
|
edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
|
|
readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
|
|
readl(base + ECC_CSYND2_OFST));
|
|
ue_err:
|
|
if (!p->ue_cnt)
|
|
goto out;
|
|
|
|
regval = readl(base + ECC_UEADDR0_OFST);
|
|
p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK);
|
|
regval = readl(base + ECC_UEADDR1_OFST);
|
|
p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >>
|
|
ECC_CEADDR1_BNKGRP_SHIFT;
|
|
p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >>
|
|
ECC_CEADDR1_BNKNR_SHIFT;
|
|
p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK);
|
|
p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
|
|
out:
|
|
spin_lock_irqsave(&priv->reglock, flags);
|
|
|
|
clearval = readl(base + ECC_CLR_OFST) |
|
|
ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT |
|
|
ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT;
|
|
writel(clearval, base + ECC_CLR_OFST);
|
|
|
|
spin_unlock_irqrestore(&priv->reglock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* handle_error - Handle Correctable and Uncorrectable errors.
|
|
* @mci: EDAC memory controller instance.
|
|
* @p: Synopsys ECC status structure.
|
|
*
|
|
* Handles ECC correctable and uncorrectable errors.
|
|
*/
|
|
static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
|
|
{
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
struct ecc_error_info *pinf;
|
|
|
|
if (p->ce_cnt) {
|
|
pinf = &p->ceinfo;
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
|
|
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
|
|
"DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x",
|
|
"CE", pinf->row, pinf->bank,
|
|
pinf->bankgrpnr, pinf->blknr,
|
|
pinf->bitpos, pinf->data);
|
|
} else {
|
|
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
|
|
"DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
|
|
"CE", pinf->row, pinf->bank, pinf->col,
|
|
pinf->bitpos, pinf->data);
|
|
}
|
|
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
|
|
p->ce_cnt, 0, 0, 0, 0, 0, -1,
|
|
priv->message, "");
|
|
}
|
|
|
|
if (p->ue_cnt) {
|
|
pinf = &p->ueinfo;
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
|
|
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
|
|
"DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d",
|
|
"UE", pinf->row, pinf->bank,
|
|
pinf->bankgrpnr, pinf->blknr);
|
|
} else {
|
|
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
|
|
"DDR ECC error type :%s Row %d Bank %d Col %d ",
|
|
"UE", pinf->row, pinf->bank, pinf->col);
|
|
}
|
|
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
|
|
p->ue_cnt, 0, 0, 0, 0, 0, -1,
|
|
priv->message, "");
|
|
}
|
|
|
|
memset(p, 0, sizeof(*p));
|
|
}
|
|
|
|
static void enable_intr(struct synps_edac_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* Enable UE/CE Interrupts */
|
|
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
|
|
writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
|
|
priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
|
|
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->reglock, flags);
|
|
|
|
writel(DDR_UE_MASK | DDR_CE_MASK,
|
|
priv->baseaddr + ECC_CLR_OFST);
|
|
|
|
spin_unlock_irqrestore(&priv->reglock, flags);
|
|
}
|
|
|
|
static void disable_intr(struct synps_edac_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* Disable UE/CE Interrupts */
|
|
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
|
|
writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
|
|
priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
|
|
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->reglock, flags);
|
|
|
|
writel(0, priv->baseaddr + ECC_CLR_OFST);
|
|
|
|
spin_unlock_irqrestore(&priv->reglock, flags);
|
|
}
|
|
|
|
/**
|
|
* intr_handler - Interrupt Handler for ECC interrupts.
|
|
* @irq: IRQ number.
|
|
* @dev_id: Device ID.
|
|
*
|
|
* Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise.
|
|
*/
|
|
static irqreturn_t intr_handler(int irq, void *dev_id)
|
|
{
|
|
const struct synps_platform_data *p_data;
|
|
struct mem_ctl_info *mci = dev_id;
|
|
struct synps_edac_priv *priv;
|
|
int status, regval;
|
|
|
|
priv = mci->pvt_info;
|
|
p_data = priv->p_data;
|
|
|
|
/*
|
|
* v3.0 of the controller has the ce/ue bits cleared automatically,
|
|
* so this condition does not apply.
|
|
*/
|
|
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
|
|
regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
|
|
regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
|
|
if (!(regval & ECC_CE_UE_INTR_MASK))
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
status = p_data->get_error_info(priv);
|
|
if (status)
|
|
return IRQ_NONE;
|
|
|
|
priv->ce_cnt += priv->stat.ce_cnt;
|
|
priv->ue_cnt += priv->stat.ue_cnt;
|
|
handle_error(mci, &priv->stat);
|
|
|
|
edac_dbg(3, "Total error count CE %d UE %d\n",
|
|
priv->ce_cnt, priv->ue_cnt);
|
|
/* v3.0 of the controller does not have this register */
|
|
if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
|
|
writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* check_errors - Check controller for ECC errors.
|
|
* @mci: EDAC memory controller instance.
|
|
*
|
|
* Check and post ECC errors. Called by the polling thread.
|
|
*/
|
|
static void check_errors(struct mem_ctl_info *mci)
|
|
{
|
|
const struct synps_platform_data *p_data;
|
|
struct synps_edac_priv *priv;
|
|
int status;
|
|
|
|
priv = mci->pvt_info;
|
|
p_data = priv->p_data;
|
|
|
|
status = p_data->get_error_info(priv);
|
|
if (status)
|
|
return;
|
|
|
|
priv->ce_cnt += priv->stat.ce_cnt;
|
|
priv->ue_cnt += priv->stat.ue_cnt;
|
|
handle_error(mci, &priv->stat);
|
|
|
|
edac_dbg(3, "Total error count CE %d UE %d\n",
|
|
priv->ce_cnt, priv->ue_cnt);
|
|
}
|
|
|
|
/**
|
|
* zynq_get_dtype - Return the controller memory width.
|
|
* @base: DDR memory controller base address.
|
|
*
|
|
* Get the EDAC device type width appropriate for the current controller
|
|
* configuration.
|
|
*
|
|
* Return: a device type width enumeration.
|
|
*/
|
|
static enum dev_type zynq_get_dtype(const void __iomem *base)
|
|
{
|
|
enum dev_type dt;
|
|
u32 width;
|
|
|
|
width = readl(base + CTRL_OFST);
|
|
width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
|
|
|
|
switch (width) {
|
|
case DDRCTL_WDTH_16:
|
|
dt = DEV_X2;
|
|
break;
|
|
case DDRCTL_WDTH_32:
|
|
dt = DEV_X4;
|
|
break;
|
|
default:
|
|
dt = DEV_UNKNOWN;
|
|
}
|
|
|
|
return dt;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_get_dtype - Return the controller memory width.
|
|
* @base: DDR memory controller base address.
|
|
*
|
|
* Get the EDAC device type width appropriate for the current controller
|
|
* configuration.
|
|
*
|
|
* Return: a device type width enumeration.
|
|
*/
|
|
static enum dev_type zynqmp_get_dtype(const void __iomem *base)
|
|
{
|
|
enum dev_type dt;
|
|
u32 width;
|
|
|
|
width = readl(base + CTRL_OFST);
|
|
width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
|
|
switch (width) {
|
|
case DDRCTL_EWDTH_16:
|
|
dt = DEV_X2;
|
|
break;
|
|
case DDRCTL_EWDTH_32:
|
|
dt = DEV_X4;
|
|
break;
|
|
case DDRCTL_EWDTH_64:
|
|
dt = DEV_X8;
|
|
break;
|
|
default:
|
|
dt = DEV_UNKNOWN;
|
|
}
|
|
|
|
return dt;
|
|
}
|
|
|
|
/**
|
|
* zynq_get_ecc_state - Return the controller ECC enable/disable status.
|
|
* @base: DDR memory controller base address.
|
|
*
|
|
* Get the ECC enable/disable status of the controller.
|
|
*
|
|
* Return: true if enabled, otherwise false.
|
|
*/
|
|
static bool zynq_get_ecc_state(void __iomem *base)
|
|
{
|
|
enum dev_type dt;
|
|
u32 ecctype;
|
|
|
|
dt = zynq_get_dtype(base);
|
|
if (dt == DEV_UNKNOWN)
|
|
return false;
|
|
|
|
ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
|
|
if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_get_ecc_state - Return the controller ECC enable/disable status.
|
|
* @base: DDR memory controller base address.
|
|
*
|
|
* Get the ECC enable/disable status for the controller.
|
|
*
|
|
* Return: a ECC status boolean i.e true/false - enabled/disabled.
|
|
*/
|
|
static bool zynqmp_get_ecc_state(void __iomem *base)
|
|
{
|
|
enum dev_type dt;
|
|
u32 ecctype;
|
|
|
|
dt = zynqmp_get_dtype(base);
|
|
if (dt == DEV_UNKNOWN)
|
|
return false;
|
|
|
|
ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK;
|
|
if ((ecctype == SCRUB_MODE_SECDED) &&
|
|
((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8)))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* get_memsize - Read the size of the attached memory device.
|
|
*
|
|
* Return: the memory size in bytes.
|
|
*/
|
|
static u32 get_memsize(void)
|
|
{
|
|
struct sysinfo inf;
|
|
|
|
si_meminfo(&inf);
|
|
|
|
return inf.totalram * inf.mem_unit;
|
|
}
|
|
|
|
/**
|
|
* zynq_get_mtype - Return the controller memory type.
|
|
* @base: Synopsys ECC status structure.
|
|
*
|
|
* Get the EDAC memory type appropriate for the current controller
|
|
* configuration.
|
|
*
|
|
* Return: a memory type enumeration.
|
|
*/
|
|
static enum mem_type zynq_get_mtype(const void __iomem *base)
|
|
{
|
|
enum mem_type mt;
|
|
u32 memtype;
|
|
|
|
memtype = readl(base + T_ZQ_OFST);
|
|
|
|
if (memtype & T_ZQ_DDRMODE_MASK)
|
|
mt = MEM_DDR3;
|
|
else
|
|
mt = MEM_DDR2;
|
|
|
|
return mt;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_get_mtype - Returns controller memory type.
|
|
* @base: Synopsys ECC status structure.
|
|
*
|
|
* Get the EDAC memory type appropriate for the current controller
|
|
* configuration.
|
|
*
|
|
* Return: a memory type enumeration.
|
|
*/
|
|
static enum mem_type zynqmp_get_mtype(const void __iomem *base)
|
|
{
|
|
enum mem_type mt;
|
|
u32 memtype;
|
|
|
|
memtype = readl(base + CTRL_OFST);
|
|
|
|
if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
|
|
mt = MEM_DDR3;
|
|
else if (memtype & MEM_TYPE_DDR2)
|
|
mt = MEM_RDDR2;
|
|
else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4))
|
|
mt = MEM_DDR4;
|
|
else
|
|
mt = MEM_EMPTY;
|
|
|
|
return mt;
|
|
}
|
|
|
|
/**
|
|
* init_csrows - Initialize the csrow data.
|
|
* @mci: EDAC memory controller instance.
|
|
*
|
|
* Initialize the chip select rows associated with the EDAC memory
|
|
* controller instance.
|
|
*/
|
|
static void init_csrows(struct mem_ctl_info *mci)
|
|
{
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
const struct synps_platform_data *p_data;
|
|
struct csrow_info *csi;
|
|
struct dimm_info *dimm;
|
|
u32 size, row;
|
|
int j;
|
|
|
|
p_data = priv->p_data;
|
|
|
|
for (row = 0; row < mci->nr_csrows; row++) {
|
|
csi = mci->csrows[row];
|
|
size = get_memsize();
|
|
|
|
for (j = 0; j < csi->nr_channels; j++) {
|
|
dimm = csi->channels[j]->dimm;
|
|
dimm->edac_mode = EDAC_SECDED;
|
|
dimm->mtype = p_data->get_mtype(priv->baseaddr);
|
|
dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels;
|
|
dimm->grain = SYNPS_EDAC_ERR_GRAIN;
|
|
dimm->dtype = p_data->get_dtype(priv->baseaddr);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* mc_init - Initialize one driver instance.
|
|
* @mci: EDAC memory controller instance.
|
|
* @pdev: platform device.
|
|
*
|
|
* Perform initialization of the EDAC memory controller instance and
|
|
* related driver-private data associated with the memory controller the
|
|
* instance is bound to.
|
|
*/
|
|
static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
|
|
{
|
|
struct synps_edac_priv *priv;
|
|
|
|
mci->pdev = &pdev->dev;
|
|
priv = mci->pvt_info;
|
|
platform_set_drvdata(pdev, mci);
|
|
|
|
/* Initialize controller capabilities and configuration */
|
|
mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
|
|
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
|
|
mci->scrub_cap = SCRUB_HW_SRC;
|
|
mci->scrub_mode = SCRUB_NONE;
|
|
|
|
mci->edac_cap = EDAC_FLAG_SECDED;
|
|
mci->ctl_name = "synps_ddr_controller";
|
|
mci->dev_name = SYNPS_EDAC_MOD_STRING;
|
|
mci->mod_name = SYNPS_EDAC_MOD_VER;
|
|
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
|
|
edac_op_state = EDAC_OPSTATE_INT;
|
|
} else {
|
|
edac_op_state = EDAC_OPSTATE_POLL;
|
|
mci->edac_check = check_errors;
|
|
}
|
|
|
|
mci->ctl_page_to_phys = NULL;
|
|
|
|
init_csrows(mci);
|
|
}
|
|
|
|
static int setup_irq(struct mem_ctl_info *mci,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
int ret, irq;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"No IRQ %d in DT\n", irq);
|
|
return irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, intr_handler,
|
|
0, dev_name(&pdev->dev), mci);
|
|
if (ret < 0) {
|
|
edac_printk(KERN_ERR, EDAC_MC, "Failed to request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
enable_intr(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct synps_platform_data zynq_edac_def = {
|
|
.get_error_info = zynq_get_error_info,
|
|
.get_mtype = zynq_get_mtype,
|
|
.get_dtype = zynq_get_dtype,
|
|
.get_ecc_state = zynq_get_ecc_state,
|
|
.quirks = 0,
|
|
};
|
|
|
|
static const struct synps_platform_data zynqmp_edac_def = {
|
|
.get_error_info = zynqmp_get_error_info,
|
|
.get_mtype = zynqmp_get_mtype,
|
|
.get_dtype = zynqmp_get_dtype,
|
|
.get_ecc_state = zynqmp_get_ecc_state,
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
.get_mem_info = zynqmp_get_mem_info,
|
|
#endif
|
|
.quirks = (DDR_ECC_INTR_SUPPORT
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
| DDR_ECC_DATA_POISON_SUPPORT
|
|
#endif
|
|
),
|
|
};
|
|
|
|
static const struct synps_platform_data synopsys_edac_def = {
|
|
.get_error_info = zynqmp_get_error_info,
|
|
.get_mtype = zynqmp_get_mtype,
|
|
.get_dtype = zynqmp_get_dtype,
|
|
.get_ecc_state = zynqmp_get_ecc_state,
|
|
.quirks = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
| DDR_ECC_DATA_POISON_SUPPORT
|
|
#endif
|
|
),
|
|
};
|
|
|
|
|
|
static const struct of_device_id synps_edac_match[] = {
|
|
{
|
|
.compatible = "xlnx,zynq-ddrc-a05",
|
|
.data = (void *)&zynq_edac_def
|
|
},
|
|
{
|
|
.compatible = "xlnx,zynqmp-ddrc-2.40a",
|
|
.data = (void *)&zynqmp_edac_def
|
|
},
|
|
{
|
|
.compatible = "snps,ddrc-3.80a",
|
|
.data = (void *)&synopsys_edac_def
|
|
},
|
|
{
|
|
/* end of table */
|
|
}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, synps_edac_match);
|
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
|
|
|
|
/**
|
|
* ddr_poison_setup - Update poison registers.
|
|
* @priv: DDR memory controller private instance data.
|
|
*
|
|
* Update poison registers as per DDR mapping.
|
|
* Return: none.
|
|
*/
|
|
static void ddr_poison_setup(struct synps_edac_priv *priv)
|
|
{
|
|
int col = 0, row = 0, bank = 0, bankgrp = 0, rank = 0, regval;
|
|
const struct synps_platform_data *p_data;
|
|
int index;
|
|
ulong hif_addr = 0;
|
|
|
|
p_data = priv->p_data;
|
|
|
|
if (p_data->get_mem_info)
|
|
hif_addr = p_data->get_mem_info(priv);
|
|
else
|
|
hif_addr = priv->poison_addr >> 3;
|
|
|
|
for (index = 0; index < DDR_MAX_ROW_SHIFT; index++) {
|
|
if (priv->row_shift[index])
|
|
row |= (((hif_addr >> priv->row_shift[index]) &
|
|
BIT(0)) << index);
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (index = 0; index < DDR_MAX_COL_SHIFT; index++) {
|
|
if (priv->col_shift[index] || index < 3)
|
|
col |= (((hif_addr >> priv->col_shift[index]) &
|
|
BIT(0)) << index);
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (index = 0; index < DDR_MAX_BANK_SHIFT; index++) {
|
|
if (priv->bank_shift[index])
|
|
bank |= (((hif_addr >> priv->bank_shift[index]) &
|
|
BIT(0)) << index);
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (index = 0; index < DDR_MAX_BANKGRP_SHIFT; index++) {
|
|
if (priv->bankgrp_shift[index])
|
|
bankgrp |= (((hif_addr >> priv->bankgrp_shift[index])
|
|
& BIT(0)) << index);
|
|
else
|
|
break;
|
|
}
|
|
|
|
if (priv->rank_shift[0])
|
|
rank = (hif_addr >> priv->rank_shift[0]) & BIT(0);
|
|
|
|
regval = (rank << ECC_POISON0_RANK_SHIFT) & ECC_POISON0_RANK_MASK;
|
|
regval |= (col << ECC_POISON0_COLUMN_SHIFT) & ECC_POISON0_COLUMN_MASK;
|
|
writel(regval, priv->baseaddr + ECC_POISON0_OFST);
|
|
|
|
regval = (bankgrp << ECC_POISON1_BG_SHIFT) & ECC_POISON1_BG_MASK;
|
|
regval |= (bank << ECC_POISON1_BANKNR_SHIFT) & ECC_POISON1_BANKNR_MASK;
|
|
regval |= (row << ECC_POISON1_ROW_SHIFT) & ECC_POISON1_ROW_MASK;
|
|
writel(regval, priv->baseaddr + ECC_POISON1_OFST);
|
|
}
|
|
|
|
static ssize_t inject_data_error_show(struct device *dev,
|
|
struct device_attribute *mattr,
|
|
char *data)
|
|
{
|
|
struct mem_ctl_info *mci = to_mci(dev);
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
|
|
return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r"
|
|
"Error injection Address: 0x%lx\n\r",
|
|
readl(priv->baseaddr + ECC_POISON0_OFST),
|
|
readl(priv->baseaddr + ECC_POISON1_OFST),
|
|
priv->poison_addr);
|
|
}
|
|
|
|
static ssize_t inject_data_error_store(struct device *dev,
|
|
struct device_attribute *mattr,
|
|
const char *data, size_t count)
|
|
{
|
|
struct mem_ctl_info *mci = to_mci(dev);
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
|
|
if (kstrtoul(data, 0, &priv->poison_addr))
|
|
return -EINVAL;
|
|
|
|
ddr_poison_setup(priv);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t inject_data_poison_show(struct device *dev,
|
|
struct device_attribute *mattr,
|
|
char *data)
|
|
{
|
|
struct mem_ctl_info *mci = to_mci(dev);
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
|
|
return sprintf(data, "Data Poisoning: %s\n\r",
|
|
(((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) == 0x3)
|
|
? ("Correctable Error") : ("UnCorrectable Error"));
|
|
}
|
|
|
|
static ssize_t inject_data_poison_store(struct device *dev,
|
|
struct device_attribute *mattr,
|
|
const char *data, size_t count)
|
|
{
|
|
struct mem_ctl_info *mci = to_mci(dev);
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
|
|
writel(0, priv->baseaddr + DDRC_SWCTL);
|
|
if (strncmp(data, "CE", 2) == 0)
|
|
writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
|
|
else
|
|
writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
|
|
writel(1, priv->baseaddr + DDRC_SWCTL);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(inject_data_error);
|
|
static DEVICE_ATTR_RW(inject_data_poison);
|
|
|
|
static int edac_create_sysfs_attributes(struct mem_ctl_info *mci)
|
|
{
|
|
int rc;
|
|
|
|
rc = device_create_file(&mci->dev, &dev_attr_inject_data_error);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison);
|
|
if (rc < 0)
|
|
return rc;
|
|
return 0;
|
|
}
|
|
|
|
static void edac_remove_sysfs_attributes(struct mem_ctl_info *mci)
|
|
{
|
|
device_remove_file(&mci->dev, &dev_attr_inject_data_error);
|
|
device_remove_file(&mci->dev, &dev_attr_inject_data_poison);
|
|
}
|
|
|
|
static void setup_row_address_map(struct synps_edac_priv *priv, u32 *addrmap)
|
|
{
|
|
u32 addrmap_row_b2_10;
|
|
int index;
|
|
|
|
priv->row_shift[0] = (addrmap[5] & ROW_MAX_VAL_MASK) + ROW_B0_BASE;
|
|
priv->row_shift[1] = ((addrmap[5] >> 8) &
|
|
ROW_MAX_VAL_MASK) + ROW_B1_BASE;
|
|
|
|
addrmap_row_b2_10 = (addrmap[5] >> 16) & ROW_MAX_VAL_MASK;
|
|
if (addrmap_row_b2_10 != ROW_MAX_VAL_MASK) {
|
|
for (index = 2; index < 11; index++)
|
|
priv->row_shift[index] = addrmap_row_b2_10 +
|
|
index + ROW_B0_BASE;
|
|
|
|
} else {
|
|
priv->row_shift[2] = (addrmap[9] &
|
|
ROW_MAX_VAL_MASK) + ROW_B2_BASE;
|
|
priv->row_shift[3] = ((addrmap[9] >> 8) &
|
|
ROW_MAX_VAL_MASK) + ROW_B3_BASE;
|
|
priv->row_shift[4] = ((addrmap[9] >> 16) &
|
|
ROW_MAX_VAL_MASK) + ROW_B4_BASE;
|
|
priv->row_shift[5] = ((addrmap[9] >> 24) &
|
|
ROW_MAX_VAL_MASK) + ROW_B5_BASE;
|
|
priv->row_shift[6] = (addrmap[10] &
|
|
ROW_MAX_VAL_MASK) + ROW_B6_BASE;
|
|
priv->row_shift[7] = ((addrmap[10] >> 8) &
|
|
ROW_MAX_VAL_MASK) + ROW_B7_BASE;
|
|
priv->row_shift[8] = ((addrmap[10] >> 16) &
|
|
ROW_MAX_VAL_MASK) + ROW_B8_BASE;
|
|
priv->row_shift[9] = ((addrmap[10] >> 24) &
|
|
ROW_MAX_VAL_MASK) + ROW_B9_BASE;
|
|
priv->row_shift[10] = (addrmap[11] &
|
|
ROW_MAX_VAL_MASK) + ROW_B10_BASE;
|
|
}
|
|
|
|
priv->row_shift[11] = (((addrmap[5] >> 24) & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[5] >> 24) &
|
|
ROW_MAX_VAL_MASK) + ROW_B11_BASE);
|
|
priv->row_shift[12] = ((addrmap[6] & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : ((addrmap[6] &
|
|
ROW_MAX_VAL_MASK) + ROW_B12_BASE);
|
|
priv->row_shift[13] = (((addrmap[6] >> 8) & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 8) &
|
|
ROW_MAX_VAL_MASK) + ROW_B13_BASE);
|
|
priv->row_shift[14] = (((addrmap[6] >> 16) & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 16) &
|
|
ROW_MAX_VAL_MASK) + ROW_B14_BASE);
|
|
priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) &
|
|
ROW_MAX_VAL_MASK) + ROW_B15_BASE);
|
|
priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] &
|
|
ROW_MAX_VAL_MASK) + ROW_B16_BASE);
|
|
priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) ==
|
|
ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) &
|
|
ROW_MAX_VAL_MASK) + ROW_B17_BASE);
|
|
}
|
|
|
|
static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap)
|
|
{
|
|
u32 width, memtype;
|
|
int index;
|
|
|
|
memtype = readl(priv->baseaddr + CTRL_OFST);
|
|
width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT;
|
|
|
|
priv->col_shift[0] = 0;
|
|
priv->col_shift[1] = 1;
|
|
priv->col_shift[2] = (addrmap[2] & COL_MAX_VAL_MASK) + COL_B2_BASE;
|
|
priv->col_shift[3] = ((addrmap[2] >> 8) &
|
|
COL_MAX_VAL_MASK) + COL_B3_BASE;
|
|
priv->col_shift[4] = (((addrmap[2] >> 16) & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 16) &
|
|
COL_MAX_VAL_MASK) + COL_B4_BASE);
|
|
priv->col_shift[5] = (((addrmap[2] >> 24) & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 24) &
|
|
COL_MAX_VAL_MASK) + COL_B5_BASE);
|
|
priv->col_shift[6] = ((addrmap[3] & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : ((addrmap[3] &
|
|
COL_MAX_VAL_MASK) + COL_B6_BASE);
|
|
priv->col_shift[7] = (((addrmap[3] >> 8) & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 8) &
|
|
COL_MAX_VAL_MASK) + COL_B7_BASE);
|
|
priv->col_shift[8] = (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 16) &
|
|
COL_MAX_VAL_MASK) + COL_B8_BASE);
|
|
priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) ==
|
|
COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) &
|
|
COL_MAX_VAL_MASK) + COL_B9_BASE);
|
|
if (width == DDRCTL_EWDTH_64) {
|
|
if (memtype & MEM_TYPE_LPDDR3) {
|
|
priv->col_shift[10] = ((addrmap[4] &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
((addrmap[4] & COL_MAX_VAL_MASK) +
|
|
COL_B10_BASE);
|
|
priv->col_shift[11] = (((addrmap[4] >> 8) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
|
|
COL_B11_BASE);
|
|
} else {
|
|
priv->col_shift[11] = ((addrmap[4] &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
((addrmap[4] & COL_MAX_VAL_MASK) +
|
|
COL_B10_BASE);
|
|
priv->col_shift[13] = (((addrmap[4] >> 8) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[4] >> 8) & COL_MAX_VAL_MASK) +
|
|
COL_B11_BASE);
|
|
}
|
|
} else if (width == DDRCTL_EWDTH_32) {
|
|
if (memtype & MEM_TYPE_LPDDR3) {
|
|
priv->col_shift[10] = (((addrmap[3] >> 24) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
|
|
COL_B9_BASE);
|
|
priv->col_shift[11] = ((addrmap[4] &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
((addrmap[4] & COL_MAX_VAL_MASK) +
|
|
COL_B10_BASE);
|
|
} else {
|
|
priv->col_shift[11] = (((addrmap[3] >> 24) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
|
|
COL_B9_BASE);
|
|
priv->col_shift[13] = ((addrmap[4] &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
((addrmap[4] & COL_MAX_VAL_MASK) +
|
|
COL_B10_BASE);
|
|
}
|
|
} else {
|
|
if (memtype & MEM_TYPE_LPDDR3) {
|
|
priv->col_shift[10] = (((addrmap[3] >> 16) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
|
|
COL_B8_BASE);
|
|
priv->col_shift[11] = (((addrmap[3] >> 24) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
|
|
COL_B9_BASE);
|
|
priv->col_shift[13] = ((addrmap[4] &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
((addrmap[4] & COL_MAX_VAL_MASK) +
|
|
COL_B10_BASE);
|
|
} else {
|
|
priv->col_shift[11] = (((addrmap[3] >> 16) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 16) & COL_MAX_VAL_MASK) +
|
|
COL_B8_BASE);
|
|
priv->col_shift[13] = (((addrmap[3] >> 24) &
|
|
COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[3] >> 24) & COL_MAX_VAL_MASK) +
|
|
COL_B9_BASE);
|
|
}
|
|
}
|
|
|
|
if (width) {
|
|
for (index = 9; index > width; index--) {
|
|
priv->col_shift[index] = priv->col_shift[index - width];
|
|
priv->col_shift[index - width] = 0;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
static void setup_bank_address_map(struct synps_edac_priv *priv, u32 *addrmap)
|
|
{
|
|
priv->bank_shift[0] = (addrmap[1] & BANK_MAX_VAL_MASK) + BANK_B0_BASE;
|
|
priv->bank_shift[1] = ((addrmap[1] >> 8) &
|
|
BANK_MAX_VAL_MASK) + BANK_B1_BASE;
|
|
priv->bank_shift[2] = (((addrmap[1] >> 16) &
|
|
BANK_MAX_VAL_MASK) == BANK_MAX_VAL_MASK) ? 0 :
|
|
(((addrmap[1] >> 16) & BANK_MAX_VAL_MASK) +
|
|
BANK_B2_BASE);
|
|
|
|
}
|
|
|
|
static void setup_bg_address_map(struct synps_edac_priv *priv, u32 *addrmap)
|
|
{
|
|
priv->bankgrp_shift[0] = (addrmap[8] &
|
|
BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE;
|
|
priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) ==
|
|
BANKGRP_MAX_VAL_MASK) ? 0 : (((addrmap[8] >> 8)
|
|
& BANKGRP_MAX_VAL_MASK) + BANKGRP_B1_BASE);
|
|
|
|
}
|
|
|
|
static void setup_rank_address_map(struct synps_edac_priv *priv, u32 *addrmap)
|
|
{
|
|
priv->rank_shift[0] = ((addrmap[0] & RANK_MAX_VAL_MASK) ==
|
|
RANK_MAX_VAL_MASK) ? 0 : ((addrmap[0] &
|
|
RANK_MAX_VAL_MASK) + RANK_B0_BASE);
|
|
}
|
|
|
|
/**
|
|
* setup_address_map - Set Address Map by querying ADDRMAP registers.
|
|
* @priv: DDR memory controller private instance data.
|
|
*
|
|
* Set Address Map by querying ADDRMAP registers.
|
|
*
|
|
* Return: none.
|
|
*/
|
|
static void setup_address_map(struct synps_edac_priv *priv)
|
|
{
|
|
u32 addrmap[12];
|
|
int index;
|
|
|
|
for (index = 0; index < 12; index++) {
|
|
u32 addrmap_offset;
|
|
|
|
addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4);
|
|
addrmap[index] = readl(priv->baseaddr + addrmap_offset);
|
|
}
|
|
|
|
setup_row_address_map(priv, addrmap);
|
|
|
|
setup_column_address_map(priv, addrmap);
|
|
|
|
setup_bank_address_map(priv, addrmap);
|
|
|
|
setup_bg_address_map(priv, addrmap);
|
|
|
|
setup_rank_address_map(priv, addrmap);
|
|
}
|
|
#endif /* CONFIG_EDAC_DEBUG */
|
|
|
|
/**
|
|
* mc_probe - Check controller and bind driver.
|
|
* @pdev: platform device.
|
|
*
|
|
* Probe a specific controller instance for binding with the driver.
|
|
*
|
|
* Return: 0 if the controller instance was successfully bound to the
|
|
* driver; otherwise, < 0 on error.
|
|
*/
|
|
static int mc_probe(struct platform_device *pdev)
|
|
{
|
|
const struct synps_platform_data *p_data;
|
|
struct edac_mc_layer layers[2];
|
|
struct synps_edac_priv *priv;
|
|
struct mem_ctl_info *mci;
|
|
void __iomem *baseaddr;
|
|
int rc;
|
|
|
|
baseaddr = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(baseaddr))
|
|
return PTR_ERR(baseaddr);
|
|
|
|
p_data = of_device_get_match_data(&pdev->dev);
|
|
if (!p_data)
|
|
return -ENODEV;
|
|
|
|
if (!p_data->get_ecc_state(baseaddr)) {
|
|
edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
|
|
layers[0].size = SYNPS_EDAC_NR_CSROWS;
|
|
layers[0].is_virt_csrow = true;
|
|
layers[1].type = EDAC_MC_LAYER_CHANNEL;
|
|
layers[1].size = SYNPS_EDAC_NR_CHANS;
|
|
layers[1].is_virt_csrow = false;
|
|
|
|
mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
|
|
sizeof(struct synps_edac_priv));
|
|
if (!mci) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Failed memory allocation for mc instance\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = mci->pvt_info;
|
|
priv->baseaddr = baseaddr;
|
|
priv->p_data = p_data;
|
|
spin_lock_init(&priv->reglock);
|
|
|
|
mc_init(mci, pdev);
|
|
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
|
|
rc = setup_irq(mci, pdev);
|
|
if (rc)
|
|
goto free_edac_mc;
|
|
}
|
|
|
|
rc = edac_mc_add_mc(mci);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Failed to register with EDAC core\n");
|
|
goto free_edac_mc;
|
|
}
|
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) {
|
|
rc = edac_create_sysfs_attributes(mci);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Failed to create sysfs entries\n");
|
|
goto free_edac_mc;
|
|
}
|
|
}
|
|
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
|
|
setup_address_map(priv);
|
|
#endif
|
|
|
|
/*
|
|
* Start capturing the correctable and uncorrectable errors. A write of
|
|
* 0 starts the counters.
|
|
*/
|
|
if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT))
|
|
writel(0x0, baseaddr + ECC_CTRL_OFST);
|
|
|
|
return rc;
|
|
|
|
free_edac_mc:
|
|
edac_mc_free(mci);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* mc_remove - Unbind driver from controller.
|
|
* @pdev: Platform device.
|
|
*
|
|
* Return: Unconditionally 0
|
|
*/
|
|
static void mc_remove(struct platform_device *pdev)
|
|
{
|
|
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
|
|
struct synps_edac_priv *priv = mci->pvt_info;
|
|
|
|
if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
|
|
disable_intr(priv);
|
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT)
|
|
edac_remove_sysfs_attributes(mci);
|
|
#endif
|
|
|
|
edac_mc_del_mc(&pdev->dev);
|
|
edac_mc_free(mci);
|
|
}
|
|
|
|
static struct platform_driver synps_edac_mc_driver = {
|
|
.driver = {
|
|
.name = "synopsys-edac",
|
|
.of_match_table = synps_edac_match,
|
|
},
|
|
.probe = mc_probe,
|
|
.remove_new = mc_remove,
|
|
};
|
|
|
|
module_platform_driver(synps_edac_mc_driver);
|
|
|
|
MODULE_AUTHOR("Xilinx Inc");
|
|
MODULE_DESCRIPTION("Synopsys DDR ECC driver");
|
|
MODULE_LICENSE("GPL v2");
|