mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
7d12e780e0
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
1081 lines
27 KiB
C
1081 lines
27 KiB
C
/*
|
|
net-3-driver for the IBM LAN Adapter/A
|
|
|
|
This is an extension to the Linux operating system, and is covered by the
|
|
same GNU General Public License that covers that work.
|
|
|
|
Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de,
|
|
alfred.arnold@lancom.de)
|
|
|
|
This driver is based both on the SK_MCA driver, which is itself based on the
|
|
SK_G16 and 3C523 driver.
|
|
|
|
paper sources:
|
|
'PC Hardware: Aufbau, Funktionsweise, Programmierung' by
|
|
Hans-Peter Messmer for the basic Microchannel stuff
|
|
|
|
'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer
|
|
for help on Ethernet driver programming
|
|
|
|
'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National
|
|
Semiconductor for info on the MAC chip
|
|
|
|
'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
|
|
Document Number SC30-3661-00' by IBM for info on the adapter itself
|
|
|
|
Also see http://www.natsemi.com/
|
|
|
|
special acknowledgements to:
|
|
- Bob Eager for helping me out with documentation from IBM
|
|
- Jim Shorney for his endless patience with me while I was using
|
|
him as a beta tester to trace down the address filter bug ;-)
|
|
|
|
Missing things:
|
|
|
|
-> set debug level via ioctl instead of compile-time switches
|
|
-> I didn't follow the development of the 2.1.x kernels, so my
|
|
assumptions about which things changed with which kernel version
|
|
are probably nonsense
|
|
|
|
History:
|
|
Nov 6th, 1999
|
|
startup from SK_MCA driver
|
|
Dec 6th, 1999
|
|
finally got docs about the card. A big thank you to Bob Eager!
|
|
Dec 12th, 1999
|
|
first packet received
|
|
Dec 13th, 1999
|
|
recv queue done, tcpdump works
|
|
Dec 15th, 1999
|
|
transmission part works
|
|
Dec 28th, 1999
|
|
added usage of the isa_functions for Linux 2.3 . Things should
|
|
still work with 2.0.x....
|
|
Jan 28th, 2000
|
|
in Linux 2.2.13, the version.h file mysteriously didn't get
|
|
included. Added a workaround for this. Futhermore, it now
|
|
not only compiles as a modules ;-)
|
|
Jan 30th, 2000
|
|
newer kernels automatically probe more than one board, so the
|
|
'startslot' as a variable is also needed here
|
|
Apr 12th, 2000
|
|
the interrupt mask register is not set 'hard' instead of individually
|
|
setting registers, since this seems to set bits that shouldn't be
|
|
set
|
|
May 21st, 2000
|
|
reset interrupt status immediately after CAM load
|
|
add a recovery delay after releasing the chip's reset line
|
|
May 24th, 2000
|
|
finally found the bug in the address filter setup - damned signed
|
|
chars!
|
|
June 1st, 2000
|
|
corrected version codes, added support for the latest 2.3 changes
|
|
Oct 28th, 2002
|
|
cleaned up for the 2.5 tree <alan@redhat.com>
|
|
|
|
*************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/time.h>
|
|
#include <linux/mca-legacy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
|
|
#define _IBM_LANA_DRIVER_
|
|
#include "ibmlana.h"
|
|
|
|
#undef DEBUG
|
|
|
|
#define DRV_NAME "ibmlana"
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* global static data - not more since we can handle multiple boards and
|
|
* have to pack all state info into the device struct!
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
static char *MediaNames[Media_Count] = {
|
|
"10BaseT", "10Base5", "Unknown", "10Base2"
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* private subfunctions
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
#ifdef DEBUG
|
|
/* dump all registers */
|
|
|
|
static void dumpregs(struct net_device *dev)
|
|
{
|
|
int z;
|
|
|
|
for (z = 0; z < 160; z += 2) {
|
|
if (!(z & 15))
|
|
printk("REGS: %04x:", z);
|
|
printk(" %04x", inw(dev->base_addr + z));
|
|
if ((z & 15) == 14)
|
|
printk("\n");
|
|
}
|
|
}
|
|
|
|
/* dump parts of shared memory - only needed during debugging */
|
|
|
|
static void dumpmem(struct net_device *dev, u32 start, u32 len)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int z;
|
|
|
|
printk("Address %04x:\n", start);
|
|
for (z = 0; z < len; z++) {
|
|
if ((z & 15) == 0)
|
|
printk("%04x:", z);
|
|
printk(" %02x", readb(priv->base + start + z));
|
|
if ((z & 15) == 15)
|
|
printk("\n");
|
|
}
|
|
if ((z & 15) != 0)
|
|
printk("\n");
|
|
}
|
|
|
|
/* print exact time - ditto */
|
|
|
|
static void PrTime(void)
|
|
{
|
|
struct timeval tv;
|
|
|
|
do_gettimeofday(&tv);
|
|
printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec);
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
/* deduce resources out of POS registers */
|
|
|
|
static void getaddrs(int slot, int *base, int *memlen, int *iobase,
|
|
int *irq, ibmlana_medium * medium)
|
|
{
|
|
u_char pos0, pos1;
|
|
|
|
pos0 = mca_read_stored_pos(slot, 2);
|
|
pos1 = mca_read_stored_pos(slot, 3);
|
|
|
|
*base = 0xc0000 + ((pos1 & 0xf0) << 9);
|
|
*memlen = (pos1 & 0x01) ? 0x8000 : 0x4000;
|
|
*iobase = (pos0 & 0xe0) << 7;
|
|
switch (pos0 & 0x06) {
|
|
case 0:
|
|
*irq = 5;
|
|
break;
|
|
case 2:
|
|
*irq = 15;
|
|
break;
|
|
case 4:
|
|
*irq = 10;
|
|
break;
|
|
case 6:
|
|
*irq = 11;
|
|
break;
|
|
}
|
|
*medium = (pos0 & 0x18) >> 3;
|
|
}
|
|
|
|
/* wait on register value with mask and timeout */
|
|
|
|
static int wait_timeout(struct net_device *dev, int regoffs, u16 mask,
|
|
u16 value, int timeout)
|
|
{
|
|
unsigned long fin = jiffies + timeout;
|
|
|
|
while (time_before(jiffies,fin))
|
|
if ((inw(dev->base_addr + regoffs) & mask) == value)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* reset the whole board */
|
|
|
|
static void ResetBoard(struct net_device *dev)
|
|
{
|
|
unsigned char bcmval;
|
|
|
|
/* read original board control value */
|
|
|
|
bcmval = inb(dev->base_addr + BCMREG);
|
|
|
|
/* set reset bit for a while */
|
|
|
|
bcmval |= BCMREG_RESET;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
udelay(10);
|
|
bcmval &= ~BCMREG_RESET;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
|
|
/* switch over to RAM again */
|
|
|
|
bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN;
|
|
outb(bcmval, dev->base_addr + BCMREG);
|
|
}
|
|
|
|
/* calculate RAM layout & set up descriptors in RAM */
|
|
|
|
static void InitDscrs(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
u32 addr, baddr, raddr;
|
|
int z;
|
|
tda_t tda;
|
|
rda_t rda;
|
|
rra_t rra;
|
|
|
|
/* initialize RAM */
|
|
|
|
memset_io(priv->base, 0xaa,
|
|
dev->mem_start - dev->mem_start); /* XXX: typo? */
|
|
|
|
/* setup n TX descriptors - independent of RAM size */
|
|
|
|
priv->tdastart = addr = 0;
|
|
priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT;
|
|
for (z = 0; z < TXBUFCNT; z++) {
|
|
tda.status = 0;
|
|
tda.config = 0;
|
|
tda.length = 0;
|
|
tda.fragcount = 1;
|
|
tda.startlo = baddr;
|
|
tda.starthi = 0;
|
|
tda.fraglength = 0;
|
|
if (z == TXBUFCNT - 1)
|
|
tda.link = priv->tdastart;
|
|
else
|
|
tda.link = addr + sizeof(tda_t);
|
|
tda.link |= 1;
|
|
memcpy_toio(priv->base + addr, &tda, sizeof(tda_t));
|
|
addr += sizeof(tda_t);
|
|
baddr += PKTSIZE;
|
|
}
|
|
|
|
/* calculate how many receive buffers fit into remaining memory */
|
|
|
|
priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE);
|
|
|
|
/* calculate receive addresses */
|
|
|
|
priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE);
|
|
priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t));
|
|
priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t));
|
|
|
|
for (z = 0; z < priv->rxbufcnt; z++) {
|
|
rra.startlo = baddr;
|
|
rra.starthi = 0;
|
|
rra.cntlo = PKTSIZE >> 1;
|
|
rra.cnthi = 0;
|
|
memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t));
|
|
|
|
rda.status = 0;
|
|
rda.length = 0;
|
|
rda.startlo = 0;
|
|
rda.starthi = 0;
|
|
rda.seqno = 0;
|
|
if (z < priv->rxbufcnt - 1)
|
|
rda.link = addr + sizeof(rda_t);
|
|
else
|
|
rda.link = 1;
|
|
rda.inuse = 1;
|
|
memcpy_toio(priv->base + addr, &rda, sizeof(rda_t));
|
|
|
|
baddr += PKTSIZE;
|
|
raddr += sizeof(rra_t);
|
|
addr += sizeof(rda_t);
|
|
}
|
|
|
|
/* initialize current pointers */
|
|
|
|
priv->nextrxdescr = 0;
|
|
priv->lastrxdescr = priv->rxbufcnt - 1;
|
|
priv->nexttxdescr = 0;
|
|
priv->currtxdescr = 0;
|
|
priv->txusedcnt = 0;
|
|
memset(priv->txused, 0, sizeof(priv->txused));
|
|
}
|
|
|
|
/* set up Rx + Tx descriptors in SONIC */
|
|
|
|
static int InitSONIC(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* set up start & end of resource area */
|
|
|
|
outw(0, SONIC_URRA);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RSA);
|
|
outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RRP);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RWP);
|
|
|
|
/* set EOBC so that only one packet goes into one buffer */
|
|
|
|
outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC);
|
|
|
|
/* let SONIC read the first RRA descriptor */
|
|
|
|
outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG);
|
|
if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) {
|
|
printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name);
|
|
return 0;
|
|
}
|
|
|
|
/* point SONIC to the first RDA */
|
|
|
|
outw(0, dev->base_addr + SONIC_URDA);
|
|
outw(priv->rdastart, dev->base_addr + SONIC_CRDA);
|
|
|
|
/* set upper half of TDA address */
|
|
|
|
outw(0, dev->base_addr + SONIC_UTDA);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* stop SONIC so we can reinitialize it */
|
|
|
|
static void StopSONIC(struct net_device *dev)
|
|
{
|
|
/* disable interrupts */
|
|
|
|
outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG);
|
|
outb(0, dev->base_addr + SONIC_IMREG);
|
|
|
|
/* reset the SONIC */
|
|
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
|
|
/* initialize card and SONIC for proper operation */
|
|
|
|
static void putcam(camentry_t * cams, int *camcnt, char *addr)
|
|
{
|
|
camentry_t *pcam = cams + (*camcnt);
|
|
u8 *uaddr = (u8 *) addr;
|
|
|
|
pcam->index = *camcnt;
|
|
pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0];
|
|
pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2];
|
|
pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4];
|
|
(*camcnt)++;
|
|
}
|
|
|
|
static void InitBoard(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int camcnt;
|
|
camentry_t cams[16];
|
|
u32 cammask;
|
|
struct dev_mc_list *mcptr;
|
|
u16 rcrval;
|
|
|
|
/* reset the SONIC */
|
|
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
|
|
/* clear all spurious interrupts */
|
|
|
|
outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG);
|
|
|
|
/* set up the SONIC's bus interface - constant for this adapter -
|
|
must be done while the SONIC is in reset */
|
|
|
|
outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG);
|
|
outw(0, dev->base_addr + SONIC_DCREG2);
|
|
|
|
/* remove reset form the SONIC */
|
|
|
|
outw(0, dev->base_addr + SONIC_CMDREG);
|
|
udelay(10);
|
|
|
|
/* data sheet requires URRA to be programmed before setting up the CAM contents */
|
|
|
|
outw(0, dev->base_addr + SONIC_URRA);
|
|
|
|
/* program the CAM entry 0 to the device address */
|
|
|
|
camcnt = 0;
|
|
putcam(cams, &camcnt, dev->dev_addr);
|
|
|
|
/* start putting the multicast addresses into the CAM list. Stop if
|
|
it is full. */
|
|
|
|
for (mcptr = dev->mc_list; mcptr != NULL; mcptr = mcptr->next) {
|
|
putcam(cams, &camcnt, mcptr->dmi_addr);
|
|
if (camcnt == 16)
|
|
break;
|
|
}
|
|
|
|
/* calculate CAM mask */
|
|
|
|
cammask = (1 << camcnt) - 1;
|
|
|
|
/* feed CDA into SONIC, initialize RCR value (always get broadcasts) */
|
|
|
|
memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt);
|
|
memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask));
|
|
|
|
#ifdef DEBUG
|
|
printk("CAM setup:\n");
|
|
dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask));
|
|
#endif
|
|
|
|
outw(0, dev->base_addr + SONIC_CAMPTR);
|
|
outw(camcnt, dev->base_addr + SONIC_CAMCNT);
|
|
outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG);
|
|
if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) {
|
|
printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name);
|
|
return;
|
|
} else {
|
|
/* clear interrupt condition */
|
|
|
|
outw(ISREG_LCD, dev->base_addr + SONIC_ISREG);
|
|
|
|
#ifdef DEBUG
|
|
printk("Loading CAM done, address pointers %04x:%04x\n",
|
|
inw(dev->base_addr + SONIC_URRA),
|
|
inw(dev->base_addr + SONIC_CAMPTR));
|
|
{
|
|
int z;
|
|
|
|
printk("\n-->CAM: PTR %04x CNT %04x\n",
|
|
inw(dev->base_addr + SONIC_CAMPTR),
|
|
inw(dev->base_addr + SONIC_CAMCNT));
|
|
outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG);
|
|
for (z = 0; z < camcnt; z++) {
|
|
outw(z, dev->base_addr + SONIC_CAMEPTR);
|
|
printk("Entry %d: %04x %04x %04x\n", z,
|
|
inw(dev->base_addr + SONIC_CAMADDR0),
|
|
inw(dev->base_addr + SONIC_CAMADDR1),
|
|
inw(dev->base_addr + SONIC_CAMADDR2));
|
|
}
|
|
outw(0, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
rcrval = RCREG_BRD | RCREG_LB_NONE;
|
|
|
|
/* if still multicast addresses left or ALLMULTI is set, set the multicast
|
|
enable bit */
|
|
|
|
if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL))
|
|
rcrval |= RCREG_AMC;
|
|
|
|
/* promiscous mode ? */
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
rcrval |= RCREG_PRO;
|
|
|
|
/* program receive mode */
|
|
|
|
outw(rcrval, dev->base_addr + SONIC_RCREG);
|
|
#ifdef DEBUG
|
|
printk("\nRCRVAL: %04x\n", rcrval);
|
|
#endif
|
|
|
|
/* set up descriptors in shared memory + feed them into SONIC registers */
|
|
|
|
InitDscrs(dev);
|
|
if (!InitSONIC(dev))
|
|
return;
|
|
|
|
/* reset all pending interrupts */
|
|
|
|
outw(0xffff, dev->base_addr + SONIC_ISREG);
|
|
|
|
/* enable transmitter + receiver interrupts */
|
|
|
|
outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG);
|
|
outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG);
|
|
|
|
/* turn on card interrupts */
|
|
|
|
outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG);
|
|
|
|
#ifdef DEBUG
|
|
printk("Register dump after initialization:\n");
|
|
dumpregs(dev);
|
|
#endif
|
|
}
|
|
|
|
/* start transmission of a descriptor */
|
|
|
|
static void StartTx(struct net_device *dev, int descr)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int addr;
|
|
|
|
addr = priv->tdastart + (descr * sizeof(tda_t));
|
|
|
|
/* put descriptor address into SONIC */
|
|
|
|
outw(addr, dev->base_addr + SONIC_CTDA);
|
|
|
|
/* trigger transmitter */
|
|
|
|
priv->currtxdescr = descr;
|
|
outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* interrupt handler(s)
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
/* receive buffer area exhausted */
|
|
|
|
static void irqrbe_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* point the SONIC back to the RRA start */
|
|
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RRP);
|
|
outw(priv->rrastart, dev->base_addr + SONIC_RWP);
|
|
}
|
|
|
|
/* receive interrupt */
|
|
|
|
static void irqrx_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
rda_t rda;
|
|
u32 rdaaddr, lrdaaddr;
|
|
|
|
/* loop until ... */
|
|
|
|
while (1) {
|
|
/* read descriptor that was next to be filled by SONIC */
|
|
|
|
rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t));
|
|
lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t));
|
|
memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t));
|
|
|
|
/* iron out upper word halves of fields we use - SONIC will duplicate
|
|
bits 0..15 to 16..31 */
|
|
|
|
rda.status &= 0xffff;
|
|
rda.length &= 0xffff;
|
|
rda.startlo &= 0xffff;
|
|
|
|
/* stop if the SONIC still owns it, i.e. there is no data for us */
|
|
|
|
if (rda.inuse)
|
|
break;
|
|
|
|
/* good packet? */
|
|
|
|
else if (rda.status & RCREG_PRX) {
|
|
struct sk_buff *skb;
|
|
|
|
/* fetch buffer */
|
|
|
|
skb = dev_alloc_skb(rda.length + 2);
|
|
if (skb == NULL)
|
|
priv->stat.rx_dropped++;
|
|
else {
|
|
/* copy out data */
|
|
|
|
memcpy_fromio(skb_put(skb, rda.length),
|
|
priv->base +
|
|
rda.startlo, rda.length);
|
|
|
|
/* set up skb fields */
|
|
|
|
skb->dev = dev;
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
/* bookkeeping */
|
|
dev->last_rx = jiffies;
|
|
priv->stat.rx_packets++;
|
|
priv->stat.rx_bytes += rda.length;
|
|
|
|
/* pass to the upper layers */
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
/* otherwise check error status bits and increase statistics */
|
|
|
|
else {
|
|
priv->stat.rx_errors++;
|
|
if (rda.status & RCREG_FAER)
|
|
priv->stat.rx_frame_errors++;
|
|
if (rda.status & RCREG_CRCR)
|
|
priv->stat.rx_crc_errors++;
|
|
}
|
|
|
|
/* descriptor processed, will become new last descriptor in queue */
|
|
|
|
rda.link = 1;
|
|
rda.inuse = 1;
|
|
memcpy_toio(priv->base + rdaaddr, &rda,
|
|
sizeof(rda_t));
|
|
|
|
/* set up link and EOL = 0 in currently last descriptor. Only write
|
|
the link field since the SONIC may currently already access the
|
|
other fields. */
|
|
|
|
memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4);
|
|
|
|
/* advance indices */
|
|
|
|
priv->lastrxdescr = priv->nextrxdescr;
|
|
if ((++priv->nextrxdescr) >= priv->rxbufcnt)
|
|
priv->nextrxdescr = 0;
|
|
}
|
|
}
|
|
|
|
/* transmit interrupt */
|
|
|
|
static void irqtx_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
tda_t tda;
|
|
|
|
/* fetch descriptor (we forgot the size ;-) */
|
|
memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t));
|
|
|
|
/* update statistics */
|
|
priv->stat.tx_packets++;
|
|
priv->stat.tx_bytes += tda.length;
|
|
|
|
/* update our pointers */
|
|
priv->txused[priv->currtxdescr] = 0;
|
|
priv->txusedcnt--;
|
|
|
|
/* if there are more descriptors present in RAM, start them */
|
|
if (priv->txusedcnt > 0)
|
|
StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT);
|
|
|
|
/* tell the upper layer we can go on transmitting */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void irqtxerr_handler(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
tda_t tda;
|
|
|
|
/* fetch descriptor to check status */
|
|
memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t));
|
|
|
|
/* update statistics */
|
|
priv->stat.tx_errors++;
|
|
if (tda.status & (TCREG_NCRS | TCREG_CRSL))
|
|
priv->stat.tx_carrier_errors++;
|
|
if (tda.status & TCREG_EXC)
|
|
priv->stat.tx_aborted_errors++;
|
|
if (tda.status & TCREG_OWC)
|
|
priv->stat.tx_window_errors++;
|
|
if (tda.status & TCREG_FU)
|
|
priv->stat.tx_fifo_errors++;
|
|
|
|
/* update our pointers */
|
|
priv->txused[priv->currtxdescr] = 0;
|
|
priv->txusedcnt--;
|
|
|
|
/* if there are more descriptors present in RAM, start them */
|
|
if (priv->txusedcnt > 0)
|
|
StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT);
|
|
|
|
/* tell the upper layer we can go on transmitting */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* general interrupt entry */
|
|
|
|
static irqreturn_t irq_handler(int irq, void *device)
|
|
{
|
|
struct net_device *dev = (struct net_device *) device;
|
|
u16 ival;
|
|
|
|
/* in case we're not meant... */
|
|
if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND))
|
|
return IRQ_NONE;
|
|
|
|
/* loop through the interrupt bits until everything is clear */
|
|
while (1) {
|
|
ival = inw(dev->base_addr + SONIC_ISREG);
|
|
|
|
if (ival & ISREG_RBE) {
|
|
irqrbe_handler(dev);
|
|
outw(ISREG_RBE, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_PKTRX) {
|
|
irqrx_handler(dev);
|
|
outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_TXDN) {
|
|
irqtx_handler(dev);
|
|
outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
if (ival & ISREG_TXER) {
|
|
irqtxerr_handler(dev);
|
|
outw(ISREG_TXER, dev->base_addr + SONIC_ISREG);
|
|
}
|
|
break;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* driver methods
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
/* MCA info */
|
|
|
|
static int ibmlana_getinfo(char *buf, int slot, void *d)
|
|
{
|
|
int len = 0, i;
|
|
struct net_device *dev = (struct net_device *) d;
|
|
ibmlana_priv *priv;
|
|
|
|
/* can't say anything about an uninitialized device... */
|
|
|
|
if (dev == NULL)
|
|
return len;
|
|
priv = netdev_priv(dev);
|
|
|
|
/* print info */
|
|
|
|
len += sprintf(buf + len, "IRQ: %d\n", priv->realirq);
|
|
len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr);
|
|
len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1);
|
|
len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]);
|
|
len += sprintf(buf + len, "Device: %s\n", dev->name);
|
|
len += sprintf(buf + len, "MAC address:");
|
|
for (i = 0; i < 6; i++)
|
|
len += sprintf(buf + len, " %02x", dev->dev_addr[i]);
|
|
buf[len++] = '\n';
|
|
buf[len] = 0;
|
|
|
|
return len;
|
|
}
|
|
|
|
/* open driver. Means also initialization and start of LANCE */
|
|
|
|
static int ibmlana_open(struct net_device *dev)
|
|
{
|
|
int result;
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
|
|
/* register resources - only necessary for IRQ */
|
|
|
|
result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
|
|
if (result != 0) {
|
|
printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
|
|
return result;
|
|
}
|
|
dev->irq = priv->realirq;
|
|
|
|
/* set up the card and SONIC */
|
|
InitBoard(dev);
|
|
|
|
/* initialize operational flags */
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* close driver. Shut down board and free allocated resources */
|
|
|
|
static int ibmlana_close(struct net_device *dev)
|
|
{
|
|
/* turn off board */
|
|
|
|
/* release resources */
|
|
if (dev->irq != 0)
|
|
free_irq(dev->irq, dev);
|
|
dev->irq = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* transmit a block. */
|
|
|
|
static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
int retval = 0, tmplen, addr;
|
|
unsigned long flags;
|
|
tda_t tda;
|
|
int baddr;
|
|
|
|
/* find out if there are free slots for a frame to transmit. If not,
|
|
the upper layer is in deep desperation and we simply ignore the frame. */
|
|
|
|
if (priv->txusedcnt >= TXBUFCNT) {
|
|
retval = -EIO;
|
|
priv->stat.tx_dropped++;
|
|
goto tx_done;
|
|
}
|
|
|
|
/* copy the frame data into the next free transmit buffer - fillup missing */
|
|
tmplen = skb->len;
|
|
if (tmplen < 60)
|
|
tmplen = 60;
|
|
baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE);
|
|
memcpy_toio(priv->base + baddr, skb->data, skb->len);
|
|
|
|
/* copy filler into RAM - in case we're filling up...
|
|
we're filling a bit more than necessary, but that doesn't harm
|
|
since the buffer is far larger...
|
|
Sorry Linus for the filler string but I couldn't resist ;-) */
|
|
|
|
if (tmplen > skb->len) {
|
|
char *fill = "NetBSD is a nice OS too! ";
|
|
unsigned int destoffs = skb->len, l = strlen(fill);
|
|
|
|
while (destoffs < tmplen) {
|
|
memcpy_toio(priv->base + baddr + destoffs, fill, l);
|
|
destoffs += l;
|
|
}
|
|
}
|
|
|
|
/* set up the new frame descriptor */
|
|
addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t));
|
|
memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t));
|
|
tda.length = tda.fraglength = tmplen;
|
|
memcpy_toio(priv->base + addr, &tda, sizeof(tda_t));
|
|
|
|
/* if there were no active descriptors, trigger the SONIC */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
priv->txusedcnt++;
|
|
priv->txused[priv->nexttxdescr] = 1;
|
|
|
|
/* are all transmission slots used up ? */
|
|
if (priv->txusedcnt >= TXBUFCNT)
|
|
netif_stop_queue(dev);
|
|
|
|
if (priv->txusedcnt == 1)
|
|
StartTx(dev, priv->nexttxdescr);
|
|
priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
tx_done:
|
|
dev_kfree_skb(skb);
|
|
return retval;
|
|
}
|
|
|
|
/* return pointer to Ethernet statistics */
|
|
|
|
static struct net_device_stats *ibmlana_stats(struct net_device *dev)
|
|
{
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
return &priv->stat;
|
|
}
|
|
|
|
/* switch receiver mode. */
|
|
|
|
static void ibmlana_set_multicast_list(struct net_device *dev)
|
|
{
|
|
/* first stop the SONIC... */
|
|
StopSONIC(dev);
|
|
/* ...then reinit it with the new flags */
|
|
InitBoard(dev);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* hardware check
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
static int startslot; /* counts through slots when probing multiple devices */
|
|
|
|
static int ibmlana_probe(struct net_device *dev)
|
|
{
|
|
int slot, z;
|
|
int base = 0, irq = 0, iobase = 0, memlen = 0;
|
|
ibmlana_priv *priv;
|
|
ibmlana_medium medium;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
/* can't work without an MCA bus ;-) */
|
|
if (MCA_bus == 0)
|
|
return -ENODEV;
|
|
|
|
base = dev->mem_start;
|
|
irq = dev->irq;
|
|
|
|
for (slot = startslot; (slot = mca_find_adapter(IBM_LANA_ID, slot)) != -1; slot++) {
|
|
/* deduce card addresses */
|
|
getaddrs(slot, &base, &memlen, &iobase, &irq, &medium);
|
|
|
|
/* slot already in use ? */
|
|
if (mca_is_adapter_used(slot))
|
|
continue;
|
|
/* were we looking for something different ? */
|
|
if (dev->irq && dev->irq != irq)
|
|
continue;
|
|
if (dev->mem_start && dev->mem_start != base)
|
|
continue;
|
|
/* found something that matches */
|
|
break;
|
|
}
|
|
|
|
/* nothing found ? */
|
|
if (slot == -1)
|
|
return (base != 0 || irq != 0) ? -ENXIO : -ENODEV;
|
|
|
|
/* announce success */
|
|
printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1);
|
|
|
|
/* try to obtain I/O range */
|
|
if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) {
|
|
printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase);
|
|
startslot = slot + 1;
|
|
return -EBUSY;
|
|
}
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->slot = slot;
|
|
priv->realirq = irq;
|
|
priv->medium = medium;
|
|
spin_lock_init(&priv->lock);
|
|
|
|
|
|
/* set base + irq for this device (irq not allocated so far) */
|
|
|
|
dev->irq = 0;
|
|
dev->mem_start = base;
|
|
dev->mem_end = base + memlen;
|
|
dev->base_addr = iobase;
|
|
|
|
priv->base = ioremap(base, memlen);
|
|
if (!priv->base) {
|
|
printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME);
|
|
startslot = slot + 1;
|
|
release_region(iobase, IBM_LANA_IORANGE);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* make procfs entries */
|
|
mca_set_adapter_name(slot, "IBM LAN Adapter/A");
|
|
mca_set_adapter_procfn(slot, (MCA_ProcFn) ibmlana_getinfo, dev);
|
|
|
|
mca_mark_as_used(slot);
|
|
|
|
/* set methods */
|
|
|
|
dev->open = ibmlana_open;
|
|
dev->stop = ibmlana_close;
|
|
dev->hard_start_xmit = ibmlana_tx;
|
|
dev->do_ioctl = NULL;
|
|
dev->get_stats = ibmlana_stats;
|
|
dev->set_multicast_list = ibmlana_set_multicast_list;
|
|
dev->flags |= IFF_MULTICAST;
|
|
|
|
/* copy out MAC address */
|
|
|
|
for (z = 0; z < sizeof(dev->dev_addr); z++)
|
|
dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z);
|
|
|
|
/* print config */
|
|
|
|
printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, "
|
|
"MAC address %02x:%02x:%02x:%02x:%02x:%02x.\n",
|
|
dev->name, priv->realirq, dev->base_addr,
|
|
dev->mem_start, dev->mem_end - 1,
|
|
dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
|
|
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
|
|
printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]);
|
|
|
|
/* reset board */
|
|
|
|
ResetBoard(dev);
|
|
|
|
/* next probe will start at next slot */
|
|
|
|
startslot = slot + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------
|
|
* modularization support
|
|
* ------------------------------------------------------------------------ */
|
|
|
|
#ifdef MODULE
|
|
|
|
#define DEVMAX 5
|
|
|
|
static struct net_device *moddevs[DEVMAX];
|
|
static int irq;
|
|
static int io;
|
|
|
|
module_param(irq, int, 0);
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number");
|
|
MODULE_PARM_DESC(io, "IBM LAN/A I/O base address");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
int init_module(void)
|
|
{
|
|
int z;
|
|
|
|
startslot = 0;
|
|
for (z = 0; z < DEVMAX; z++) {
|
|
struct net_device *dev = alloc_etherdev(sizeof(ibmlana_priv));
|
|
if (!dev)
|
|
break;
|
|
dev->irq = irq;
|
|
dev->base_addr = io;
|
|
if (ibmlana_probe(dev)) {
|
|
free_netdev(dev);
|
|
break;
|
|
}
|
|
if (register_netdev(dev)) {
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
release_region(dev->base_addr, IBM_LANA_IORANGE);
|
|
mca_mark_as_unused(priv->slot);
|
|
mca_set_adapter_name(priv->slot, "");
|
|
mca_set_adapter_procfn(priv->slot, NULL, NULL);
|
|
iounmap(priv->base);
|
|
free_netdev(dev);
|
|
break;
|
|
}
|
|
moddevs[z] = dev;
|
|
}
|
|
return (z > 0) ? 0 : -EIO;
|
|
}
|
|
|
|
void cleanup_module(void)
|
|
{
|
|
int z;
|
|
for (z = 0; z < DEVMAX; z++) {
|
|
struct net_device *dev = moddevs[z];
|
|
if (dev) {
|
|
ibmlana_priv *priv = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
/*DeinitBoard(dev); */
|
|
release_region(dev->base_addr, IBM_LANA_IORANGE);
|
|
mca_mark_as_unused(priv->slot);
|
|
mca_set_adapter_name(priv->slot, "");
|
|
mca_set_adapter_procfn(priv->slot, NULL, NULL);
|
|
iounmap(priv->base);
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
}
|
|
#endif /* MODULE */
|