mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 01:51:53 +00:00
09c434b8a0
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
426 lines
9.5 KiB
C
426 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
|
|
* platforms.
|
|
*
|
|
* Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <asm/bbc.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "bbc_i2c.h"
|
|
|
|
/* Convert this driver to use i2c bus layer someday... */
|
|
#define I2C_PCF_PIN 0x80
|
|
#define I2C_PCF_ESO 0x40
|
|
#define I2C_PCF_ES1 0x20
|
|
#define I2C_PCF_ES2 0x10
|
|
#define I2C_PCF_ENI 0x08
|
|
#define I2C_PCF_STA 0x04
|
|
#define I2C_PCF_STO 0x02
|
|
#define I2C_PCF_ACK 0x01
|
|
|
|
#define I2C_PCF_START (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK)
|
|
#define I2C_PCF_STOP (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
|
|
#define I2C_PCF_REPSTART ( I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
|
|
#define I2C_PCF_IDLE (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ACK)
|
|
|
|
#define I2C_PCF_INI 0x40 /* 1 if not initialized */
|
|
#define I2C_PCF_STS 0x20
|
|
#define I2C_PCF_BER 0x10
|
|
#define I2C_PCF_AD0 0x08
|
|
#define I2C_PCF_LRB 0x08
|
|
#define I2C_PCF_AAS 0x04
|
|
#define I2C_PCF_LAB 0x02
|
|
#define I2C_PCF_BB 0x01
|
|
|
|
/* The BBC devices have two I2C controllers. The first I2C controller
|
|
* connects mainly to configuration proms (NVRAM, cpu configuration,
|
|
* dimm types, etc.). Whereas the second I2C controller connects to
|
|
* environmental control devices such as fans and temperature sensors.
|
|
* The second controller also connects to the smartcard reader, if present.
|
|
*/
|
|
|
|
static void set_device_claimage(struct bbc_i2c_bus *bp, struct platform_device *op, int val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_CHILDREN; i++) {
|
|
if (bp->devs[i].device == op) {
|
|
bp->devs[i].client_claimed = val;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1)
|
|
#define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0)
|
|
|
|
struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
|
|
{
|
|
struct platform_device *op = NULL;
|
|
int curidx = 0, i;
|
|
|
|
for (i = 0; i < NUM_CHILDREN; i++) {
|
|
if (!(op = bp->devs[i].device))
|
|
break;
|
|
if (curidx == index)
|
|
goto out;
|
|
op = NULL;
|
|
curidx++;
|
|
}
|
|
|
|
out:
|
|
if (curidx == index)
|
|
return op;
|
|
return NULL;
|
|
}
|
|
|
|
struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_client *client;
|
|
const u32 *reg;
|
|
|
|
client = kzalloc(sizeof(*client), GFP_KERNEL);
|
|
if (!client)
|
|
return NULL;
|
|
client->bp = bp;
|
|
client->op = op;
|
|
|
|
reg = of_get_property(op->dev.of_node, "reg", NULL);
|
|
if (!reg) {
|
|
kfree(client);
|
|
return NULL;
|
|
}
|
|
|
|
client->bus = reg[0];
|
|
client->address = reg[1];
|
|
|
|
claim_device(bp, op);
|
|
|
|
return client;
|
|
}
|
|
|
|
void bbc_i2c_detach(struct bbc_i2c_client *client)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
struct platform_device *op = client->op;
|
|
|
|
release_device(bp, op);
|
|
kfree(client);
|
|
}
|
|
|
|
static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
int limit = 32;
|
|
int ret = 1;
|
|
|
|
bp->waiting = 1;
|
|
add_wait_queue(&bp->wq, &wait);
|
|
while (limit-- > 0) {
|
|
long val;
|
|
|
|
val = wait_event_interruptible_timeout(
|
|
bp->wq,
|
|
(((*status = readb(bp->i2c_control_regs + 0))
|
|
& I2C_PCF_PIN) == 0),
|
|
msecs_to_jiffies(250));
|
|
if (val > 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
remove_wait_queue(&bp->wq, &wait);
|
|
bp->waiting = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
int address = client->address;
|
|
u8 status;
|
|
int ret = -1;
|
|
|
|
if (bp->i2c_bussel_reg != NULL)
|
|
writeb(client->bus, bp->i2c_bussel_reg);
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(off, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status) ||
|
|
(status & I2C_PCF_LRB) != 0)
|
|
goto out;
|
|
|
|
writeb(val, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off)
|
|
{
|
|
struct bbc_i2c_bus *bp = client->bp;
|
|
unsigned char address = client->address, status;
|
|
int ret = -1;
|
|
|
|
if (bp->i2c_bussel_reg != NULL)
|
|
writeb(client->bus, bp->i2c_bussel_reg);
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(off, bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status) ||
|
|
(status & I2C_PCF_LRB) != 0)
|
|
goto out;
|
|
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
|
|
address |= 0x1; /* READ */
|
|
|
|
writeb(address, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
/* Set PIN back to one so the device sends the first
|
|
* byte.
|
|
*/
|
|
(void) readb(bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0);
|
|
*byte = readb(bp->i2c_control_regs + 0x1);
|
|
if (wait_for_pin(bp, &status))
|
|
goto out;
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
|
|
(void) readb(bp->i2c_control_regs + 0x1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_write_buf(struct bbc_i2c_client *client,
|
|
char *buf, int len, int off)
|
|
{
|
|
int ret = 0;
|
|
|
|
while (len > 0) {
|
|
ret = bbc_i2c_writeb(client, *buf, off);
|
|
if (ret < 0)
|
|
break;
|
|
len--;
|
|
buf++;
|
|
off++;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int bbc_i2c_read_buf(struct bbc_i2c_client *client,
|
|
char *buf, int len, int off)
|
|
{
|
|
int ret = 0;
|
|
|
|
while (len > 0) {
|
|
ret = bbc_i2c_readb(client, buf, off);
|
|
if (ret < 0)
|
|
break;
|
|
len--;
|
|
buf++;
|
|
off++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_SYMBOL(bbc_i2c_getdev);
|
|
EXPORT_SYMBOL(bbc_i2c_attach);
|
|
EXPORT_SYMBOL(bbc_i2c_detach);
|
|
EXPORT_SYMBOL(bbc_i2c_writeb);
|
|
EXPORT_SYMBOL(bbc_i2c_readb);
|
|
EXPORT_SYMBOL(bbc_i2c_write_buf);
|
|
EXPORT_SYMBOL(bbc_i2c_read_buf);
|
|
|
|
static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct bbc_i2c_bus *bp = dev_id;
|
|
|
|
/* PIN going from set to clear is the only event which
|
|
* makes the i2c assert an interrupt.
|
|
*/
|
|
if (bp->waiting &&
|
|
!(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN))
|
|
wake_up_interruptible(&bp->wq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void reset_one_i2c(struct bbc_i2c_bus *bp)
|
|
{
|
|
writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
|
|
writeb(bp->own, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
|
|
writeb(bp->clock, bp->i2c_control_regs + 0x1);
|
|
writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
|
|
}
|
|
|
|
static struct bbc_i2c_bus * attach_one_i2c(struct platform_device *op, int index)
|
|
{
|
|
struct bbc_i2c_bus *bp;
|
|
struct device_node *dp;
|
|
int entry;
|
|
|
|
bp = kzalloc(sizeof(*bp), GFP_KERNEL);
|
|
if (!bp)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&bp->temps);
|
|
INIT_LIST_HEAD(&bp->fans);
|
|
|
|
bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs");
|
|
if (!bp->i2c_control_regs)
|
|
goto fail;
|
|
|
|
if (op->num_resources == 2) {
|
|
bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel");
|
|
if (!bp->i2c_bussel_reg)
|
|
goto fail;
|
|
}
|
|
|
|
bp->waiting = 0;
|
|
init_waitqueue_head(&bp->wq);
|
|
if (request_irq(op->archdata.irqs[0], bbc_i2c_interrupt,
|
|
IRQF_SHARED, "bbc_i2c", bp))
|
|
goto fail;
|
|
|
|
bp->index = index;
|
|
bp->op = op;
|
|
|
|
spin_lock_init(&bp->lock);
|
|
|
|
entry = 0;
|
|
for (dp = op->dev.of_node->child;
|
|
dp && entry < 8;
|
|
dp = dp->sibling, entry++) {
|
|
struct platform_device *child_op;
|
|
|
|
child_op = of_find_device_by_node(dp);
|
|
bp->devs[entry].device = child_op;
|
|
bp->devs[entry].client_claimed = 0;
|
|
}
|
|
|
|
writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
|
|
bp->own = readb(bp->i2c_control_regs + 0x01);
|
|
writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
|
|
bp->clock = readb(bp->i2c_control_regs + 0x01);
|
|
|
|
printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n",
|
|
bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock);
|
|
|
|
reset_one_i2c(bp);
|
|
|
|
return bp;
|
|
|
|
fail:
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[0], bp->i2c_control_regs, 2);
|
|
kfree(bp);
|
|
return NULL;
|
|
}
|
|
|
|
extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
|
|
extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
|
|
|
|
static int bbc_i2c_probe(struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_bus *bp;
|
|
int err, index = 0;
|
|
|
|
bp = attach_one_i2c(op, index);
|
|
if (!bp)
|
|
return -EINVAL;
|
|
|
|
err = bbc_envctrl_init(bp);
|
|
if (err) {
|
|
free_irq(op->archdata.irqs[0], bp);
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
|
|
kfree(bp);
|
|
} else {
|
|
dev_set_drvdata(&op->dev, bp);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int bbc_i2c_remove(struct platform_device *op)
|
|
{
|
|
struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
|
|
|
|
bbc_envctrl_cleanup(bp);
|
|
|
|
free_irq(op->archdata.irqs[0], bp);
|
|
|
|
if (bp->i2c_bussel_reg)
|
|
of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
|
|
if (bp->i2c_control_regs)
|
|
of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
|
|
|
|
kfree(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bbc_i2c_match[] = {
|
|
{
|
|
.name = "i2c",
|
|
.compatible = "SUNW,bbc-i2c",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bbc_i2c_match);
|
|
|
|
static struct platform_driver bbc_i2c_driver = {
|
|
.driver = {
|
|
.name = "bbc_i2c",
|
|
.of_match_table = bbc_i2c_match,
|
|
},
|
|
.probe = bbc_i2c_probe,
|
|
.remove = bbc_i2c_remove,
|
|
};
|
|
|
|
module_platform_driver(bbc_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|