mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 17:12:06 +00:00
7c8844481a
The interrupt controller on the wm8994 series of devices requires a level triggered parent. If one is not available but a GPIO is available for the interrupt then emulate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
270 lines
6.1 KiB
C
270 lines
6.1 KiB
C
/*
|
|
* wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
|
|
*
|
|
* Copyright 2010 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/mfd/wm8994/core.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/wm8994/registers.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
static struct regmap_irq wm8994_irqs[] = {
|
|
[WM8994_IRQ_TEMP_SHUT] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_TEMP_SHUT_EINT,
|
|
},
|
|
[WM8994_IRQ_MIC1_DET] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_MIC1_DET_EINT,
|
|
},
|
|
[WM8994_IRQ_MIC1_SHRT] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_MIC1_SHRT_EINT,
|
|
},
|
|
[WM8994_IRQ_MIC2_DET] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_MIC2_DET_EINT,
|
|
},
|
|
[WM8994_IRQ_MIC2_SHRT] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_MIC2_SHRT_EINT,
|
|
},
|
|
[WM8994_IRQ_FLL1_LOCK] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_FLL1_LOCK_EINT,
|
|
},
|
|
[WM8994_IRQ_FLL2_LOCK] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_FLL2_LOCK_EINT,
|
|
},
|
|
[WM8994_IRQ_SRC1_LOCK] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_SRC1_LOCK_EINT,
|
|
},
|
|
[WM8994_IRQ_SRC2_LOCK] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_SRC2_LOCK_EINT,
|
|
},
|
|
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_AIF1DRC1_SIG_DET,
|
|
},
|
|
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
|
|
},
|
|
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
|
|
},
|
|
[WM8994_IRQ_FIFOS_ERR] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_FIFOS_ERR_EINT,
|
|
},
|
|
[WM8994_IRQ_WSEQ_DONE] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_WSEQ_DONE_EINT,
|
|
},
|
|
[WM8994_IRQ_DCS_DONE] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_DCS_DONE_EINT,
|
|
},
|
|
[WM8994_IRQ_TEMP_WARN] = {
|
|
.reg_offset = 1,
|
|
.mask = WM8994_TEMP_WARN_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(1)] = {
|
|
.mask = WM8994_GP1_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(2)] = {
|
|
.mask = WM8994_GP2_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(3)] = {
|
|
.mask = WM8994_GP3_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(4)] = {
|
|
.mask = WM8994_GP4_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(5)] = {
|
|
.mask = WM8994_GP5_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(6)] = {
|
|
.mask = WM8994_GP6_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(7)] = {
|
|
.mask = WM8994_GP7_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(8)] = {
|
|
.mask = WM8994_GP8_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(9)] = {
|
|
.mask = WM8994_GP8_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(10)] = {
|
|
.mask = WM8994_GP10_EINT,
|
|
},
|
|
[WM8994_IRQ_GPIO(11)] = {
|
|
.mask = WM8994_GP11_EINT,
|
|
},
|
|
};
|
|
|
|
static struct regmap_irq_chip wm8994_irq_chip = {
|
|
.name = "wm8994",
|
|
.irqs = wm8994_irqs,
|
|
.num_irqs = ARRAY_SIZE(wm8994_irqs),
|
|
|
|
.num_regs = 2,
|
|
.status_base = WM8994_INTERRUPT_STATUS_1,
|
|
.mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
|
|
.ack_base = WM8994_INTERRUPT_STATUS_1,
|
|
.runtime_pm = true,
|
|
};
|
|
|
|
static void wm8994_edge_irq_enable(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static void wm8994_edge_irq_disable(struct irq_data *data)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip wm8994_edge_irq_chip = {
|
|
.name = "wm8994_edge",
|
|
.irq_disable = wm8994_edge_irq_disable,
|
|
.irq_enable = wm8994_edge_irq_enable,
|
|
};
|
|
|
|
static irqreturn_t wm8994_edge_irq(int irq, void *data)
|
|
{
|
|
struct wm8994 *wm8994 = data;
|
|
|
|
while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
|
|
handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int wm8994_edge_irq_map(struct irq_domain *h, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
struct wm8994 *wm8994 = h->host_data;
|
|
|
|
irq_set_chip_data(virq, wm8994);
|
|
irq_set_chip_and_handler(virq, &wm8994_edge_irq_chip, handle_edge_irq);
|
|
irq_set_nested_thread(virq, 1);
|
|
|
|
/* ARM needs us to explicitly flag the IRQ as valid
|
|
* and will set them noprobe when we do so. */
|
|
#ifdef CONFIG_ARM
|
|
set_irq_flags(virq, IRQF_VALID);
|
|
#else
|
|
irq_set_noprobe(virq);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops wm8994_edge_irq_ops = {
|
|
.map = wm8994_edge_irq_map,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
int wm8994_irq_init(struct wm8994 *wm8994)
|
|
{
|
|
int ret;
|
|
unsigned long irqflags;
|
|
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
|
|
|
|
if (!wm8994->irq) {
|
|
dev_warn(wm8994->dev,
|
|
"No interrupt specified, no interrupts\n");
|
|
wm8994->irq_base = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* select user or default irq flags */
|
|
irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
|
|
if (pdata->irq_flags)
|
|
irqflags = pdata->irq_flags;
|
|
|
|
/* use a GPIO for edge triggered controllers */
|
|
if (irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
|
|
if (gpio_to_irq(pdata->irq_gpio) != wm8994->irq) {
|
|
dev_warn(wm8994->dev, "IRQ %d is not GPIO %d (%d)\n",
|
|
wm8994->irq, pdata->irq_gpio,
|
|
gpio_to_irq(pdata->irq_gpio));
|
|
wm8994->irq = gpio_to_irq(pdata->irq_gpio);
|
|
}
|
|
|
|
ret = devm_gpio_request_one(wm8994->dev, pdata->irq_gpio,
|
|
GPIOF_IN, "WM8994 IRQ");
|
|
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to get IRQ GPIO: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
wm8994->edge_irq = irq_domain_add_linear(NULL, 1,
|
|
&wm8994_edge_irq_ops,
|
|
wm8994);
|
|
|
|
ret = regmap_add_irq_chip(wm8994->regmap,
|
|
irq_create_mapping(wm8994->edge_irq,
|
|
0),
|
|
IRQF_ONESHOT,
|
|
wm8994->irq_base, &wm8994_irq_chip,
|
|
&wm8994->irq_data);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to get IRQ: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = request_threaded_irq(wm8994->irq,
|
|
NULL, wm8994_edge_irq,
|
|
irqflags,
|
|
"WM8994 edge", wm8994);
|
|
} else {
|
|
ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
|
|
irqflags,
|
|
wm8994->irq_base, &wm8994_irq_chip,
|
|
&wm8994->irq_data);
|
|
}
|
|
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable top level interrupt if it was masked */
|
|
wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void wm8994_irq_exit(struct wm8994 *wm8994)
|
|
{
|
|
regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
|
|
}
|