mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
ea584595fc
cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during e.g. reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUNOr0AAoJEEEQszewGV1z9toP/2ISXRnsi3+jlqVmEGm/y6EA PPwJOiYnOhZR2/fTCHIF0PNbIi9pw7xKnzxttYCu4uCz7geHX+FfTwUZ2/KWMfqi ZJ9kEoOVVKzKjmL/m2a2tO4IRSBHqJ8dF3yvaNjS3AL7EDfG6F5STErQurdLEynK SeJZ2OwM/vRFCac6F7oDlqAUTu3xYGbVD8+zI0H0V/ReocosFlEwcbl2S8ctDWUd h98M+gY+A8rxkvVMnmQ/k7rUTme/glDQ3z5xVx+uHbS2/a5M1jSM/71cXE6YnSrR it0CK7CHomq2RzHsKf7oH7GD4kFkukMwFKeMoqz75JWz3352VZPTF53chCIqRSgO hrgGwZ7WF6pUUUhsn1ZdZsnBPA2Fou2uwslyLSAiE+OYEH2/NSVIOUcorjQcWqU/ 0Kix5yb8X1ZzRMhR+TVrTD5V0jguqp2buXq+0P2XlU6MoO2vy7iNf2eXvPg8sF8C anjTCKgmkzy7eyT2uzfDaNZAyfSBKb1TiKiR9zA0SRChJkCi1ErJEXDGeHiptvSA +D2k68Ils2LqsvdrnEd2XvVFMllh0iq7b+16o7D+Els0WRbnHpfYCaqfOuF5F4U0 SmeyI0ruawNDc5e9EBKXstt0/R9AMOetyTcTu29U2ZVo90zGaT1ofT8+R1jJ0kGa bPARJZrgecgv1E9Qnnnd =8InA -----END PGP SIGNATURE----- Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
1280 lines
33 KiB
C
1280 lines
33 KiB
C
/*
|
|
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2012 Linaro Ltd
|
|
* http://www.linaro.org
|
|
*
|
|
* Author: Thomas Abraham <thomas.ab@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This driver implements the Samsung pinctrl driver. It supports setting up of
|
|
* pinmux and pinconf configurations. The gpiolib interface is also included.
|
|
* External interrupt (gpio and wakeup) support are not included in this driver
|
|
* but provides extensions to which platform specific implementation of the gpio
|
|
* and wakeup interrupts can be hooked to.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/syscore_ops.h>
|
|
|
|
#include "../core.h"
|
|
#include "pinctrl-samsung.h"
|
|
|
|
#define GROUP_SUFFIX "-grp"
|
|
#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
|
|
#define FUNCTION_SUFFIX "-mux"
|
|
#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
|
|
|
|
/* list of all possible config options supported */
|
|
static struct pin_config {
|
|
const char *property;
|
|
enum pincfg_type param;
|
|
} cfg_params[] = {
|
|
{ "samsung,pin-pud", PINCFG_TYPE_PUD },
|
|
{ "samsung,pin-drv", PINCFG_TYPE_DRV },
|
|
{ "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
|
|
{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
|
|
{ "samsung,pin-val", PINCFG_TYPE_DAT },
|
|
};
|
|
|
|
/* Global list of devices (struct samsung_pinctrl_drv_data) */
|
|
static LIST_HEAD(drvdata_list);
|
|
|
|
static unsigned int pin_base;
|
|
|
|
static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct samsung_pin_bank, gpio_chip);
|
|
}
|
|
|
|
static int samsung_get_group_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pmx->nr_groups;
|
|
}
|
|
|
|
static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pmx->pin_groups[group].name;
|
|
}
|
|
|
|
static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pmx->pin_groups[group].pins;
|
|
*num_pins = pmx->pin_groups[group].num_pins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int reserve_map(struct device *dev, struct pinctrl_map **map,
|
|
unsigned *reserved_maps, unsigned *num_maps,
|
|
unsigned reserve)
|
|
{
|
|
unsigned old_num = *reserved_maps;
|
|
unsigned new_num = *num_maps + reserve;
|
|
struct pinctrl_map *new_map;
|
|
|
|
if (old_num >= new_num)
|
|
return 0;
|
|
|
|
new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
|
|
if (!new_map) {
|
|
dev_err(dev, "krealloc(map) failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
|
|
|
|
*map = new_map;
|
|
*reserved_maps = new_num;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps,
|
|
unsigned *num_maps, const char *group,
|
|
const char *function)
|
|
{
|
|
if (WARN_ON(*num_maps == *reserved_maps))
|
|
return -ENOSPC;
|
|
|
|
(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
|
|
(*map)[*num_maps].data.mux.group = group;
|
|
(*map)[*num_maps].data.mux.function = function;
|
|
(*num_maps)++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int add_map_configs(struct device *dev, struct pinctrl_map **map,
|
|
unsigned *reserved_maps, unsigned *num_maps,
|
|
const char *group, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
unsigned long *dup_configs;
|
|
|
|
if (WARN_ON(*num_maps == *reserved_maps))
|
|
return -ENOSPC;
|
|
|
|
dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
|
|
GFP_KERNEL);
|
|
if (!dup_configs) {
|
|
dev_err(dev, "kmemdup(configs) failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
(*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
|
|
(*map)[*num_maps].data.configs.group_or_pin = group;
|
|
(*map)[*num_maps].data.configs.configs = dup_configs;
|
|
(*map)[*num_maps].data.configs.num_configs = num_configs;
|
|
(*num_maps)++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int add_config(struct device *dev, unsigned long **configs,
|
|
unsigned *num_configs, unsigned long config)
|
|
{
|
|
unsigned old_num = *num_configs;
|
|
unsigned new_num = old_num + 1;
|
|
unsigned long *new_configs;
|
|
|
|
new_configs = krealloc(*configs, sizeof(*new_configs) * new_num,
|
|
GFP_KERNEL);
|
|
if (!new_configs) {
|
|
dev_err(dev, "krealloc(configs) failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
new_configs[old_num] = config;
|
|
|
|
*configs = new_configs;
|
|
*num_configs = new_num;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_map *map,
|
|
unsigned num_maps)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num_maps; i++)
|
|
if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
|
|
kfree(map[i].data.configs.configs);
|
|
|
|
kfree(map);
|
|
}
|
|
|
|
static int samsung_dt_subnode_to_map(struct samsung_pinctrl_drv_data *drvdata,
|
|
struct device *dev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map,
|
|
unsigned *reserved_maps,
|
|
unsigned *num_maps)
|
|
{
|
|
int ret, i;
|
|
u32 val;
|
|
unsigned long config;
|
|
unsigned long *configs = NULL;
|
|
unsigned num_configs = 0;
|
|
unsigned reserve;
|
|
struct property *prop;
|
|
const char *group;
|
|
bool has_func = false;
|
|
|
|
ret = of_property_read_u32(np, "samsung,pin-function", &val);
|
|
if (!ret)
|
|
has_func = true;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cfg_params); i++) {
|
|
ret = of_property_read_u32(np, cfg_params[i].property, &val);
|
|
if (!ret) {
|
|
config = PINCFG_PACK(cfg_params[i].param, val);
|
|
ret = add_config(dev, &configs, &num_configs, config);
|
|
if (ret < 0)
|
|
goto exit;
|
|
/* EINVAL=missing, which is fine since it's optional */
|
|
} else if (ret != -EINVAL) {
|
|
dev_err(dev, "could not parse property %s\n",
|
|
cfg_params[i].property);
|
|
}
|
|
}
|
|
|
|
reserve = 0;
|
|
if (has_func)
|
|
reserve++;
|
|
if (num_configs)
|
|
reserve++;
|
|
ret = of_property_count_strings(np, "samsung,pins");
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not parse property samsung,pins\n");
|
|
goto exit;
|
|
}
|
|
reserve *= ret;
|
|
|
|
ret = reserve_map(dev, map, reserved_maps, num_maps, reserve);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
of_property_for_each_string(np, "samsung,pins", prop, group) {
|
|
if (has_func) {
|
|
ret = add_map_mux(map, reserved_maps,
|
|
num_maps, group, np->full_name);
|
|
if (ret < 0)
|
|
goto exit;
|
|
}
|
|
|
|
if (num_configs) {
|
|
ret = add_map_configs(dev, map, reserved_maps,
|
|
num_maps, group, configs,
|
|
num_configs);
|
|
if (ret < 0)
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
exit:
|
|
kfree(configs);
|
|
return ret;
|
|
}
|
|
|
|
static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np_config,
|
|
struct pinctrl_map **map,
|
|
unsigned *num_maps)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
unsigned reserved_maps;
|
|
struct device_node *np;
|
|
int ret;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
reserved_maps = 0;
|
|
*map = NULL;
|
|
*num_maps = 0;
|
|
|
|
if (!of_get_child_count(np_config))
|
|
return samsung_dt_subnode_to_map(drvdata, pctldev->dev,
|
|
np_config, map,
|
|
&reserved_maps,
|
|
num_maps);
|
|
|
|
for_each_child_of_node(np_config, np) {
|
|
ret = samsung_dt_subnode_to_map(drvdata, pctldev->dev, np, map,
|
|
&reserved_maps, num_maps);
|
|
if (ret < 0) {
|
|
samsung_dt_free_map(pctldev, *map, *num_maps);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* list of pinctrl callbacks for the pinctrl core */
|
|
static const struct pinctrl_ops samsung_pctrl_ops = {
|
|
.get_groups_count = samsung_get_group_count,
|
|
.get_group_name = samsung_get_group_name,
|
|
.get_group_pins = samsung_get_group_pins,
|
|
.dt_node_to_map = samsung_dt_node_to_map,
|
|
.dt_free_map = samsung_dt_free_map,
|
|
};
|
|
|
|
/* check if the selector is a valid pin function selector */
|
|
static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
return drvdata->nr_functions;
|
|
}
|
|
|
|
/* return the name of the pin function specified */
|
|
static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
return drvdata->pmx_functions[selector].name;
|
|
}
|
|
|
|
/* return the groups associated for the specified function selector */
|
|
static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
|
|
unsigned selector, const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
*groups = drvdata->pmx_functions[selector].groups;
|
|
*num_groups = drvdata->pmx_functions[selector].num_groups;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* given a pin number that is local to a pin controller, find out the pin bank
|
|
* and the register base of the pin bank.
|
|
*/
|
|
static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
|
|
unsigned pin, void __iomem **reg, u32 *offset,
|
|
struct samsung_pin_bank **bank)
|
|
{
|
|
struct samsung_pin_bank *b;
|
|
|
|
b = drvdata->ctrl->pin_banks;
|
|
|
|
while ((pin >= b->pin_base) &&
|
|
((b->pin_base + b->nr_pins - 1) < pin))
|
|
b++;
|
|
|
|
*reg = drvdata->virt_base + b->pctl_offset;
|
|
*offset = pin - b->pin_base;
|
|
if (bank)
|
|
*bank = b;
|
|
}
|
|
|
|
/* enable or disable a pinmux function */
|
|
static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
|
|
unsigned group, bool enable)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
struct samsung_pin_bank_type *type;
|
|
struct samsung_pin_bank *bank;
|
|
void __iomem *reg;
|
|
u32 mask, shift, data, pin_offset;
|
|
unsigned long flags;
|
|
const struct samsung_pmx_func *func;
|
|
const struct samsung_pin_group *grp;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
func = &drvdata->pmx_functions[selector];
|
|
grp = &drvdata->pin_groups[group];
|
|
|
|
pin_to_reg_bank(drvdata, grp->pins[0] - drvdata->ctrl->base,
|
|
®, &pin_offset, &bank);
|
|
type = bank->type;
|
|
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
|
|
shift = pin_offset * type->fld_width[PINCFG_TYPE_FUNC];
|
|
if (shift >= 32) {
|
|
/* Some banks have two config registers */
|
|
shift -= 32;
|
|
reg += 4;
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->slock, flags);
|
|
|
|
data = readl(reg + type->reg_offset[PINCFG_TYPE_FUNC]);
|
|
data &= ~(mask << shift);
|
|
if (enable)
|
|
data |= func->val << shift;
|
|
writel(data, reg + type->reg_offset[PINCFG_TYPE_FUNC]);
|
|
|
|
spin_unlock_irqrestore(&bank->slock, flags);
|
|
}
|
|
|
|
/* enable a specified pinmux by writing to registers */
|
|
static int samsung_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
unsigned group)
|
|
{
|
|
samsung_pinmux_setup(pctldev, selector, group, true);
|
|
return 0;
|
|
}
|
|
|
|
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
|
|
static const struct pinmux_ops samsung_pinmux_ops = {
|
|
.get_functions_count = samsung_get_functions_count,
|
|
.get_function_name = samsung_pinmux_get_fname,
|
|
.get_function_groups = samsung_pinmux_get_groups,
|
|
.set_mux = samsung_pinmux_set_mux,
|
|
};
|
|
|
|
/* set or get the pin config settings for a specified pin */
|
|
static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *config, bool set)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
struct samsung_pin_bank_type *type;
|
|
struct samsung_pin_bank *bank;
|
|
void __iomem *reg_base;
|
|
enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
|
|
u32 data, width, pin_offset, mask, shift;
|
|
u32 cfg_value, cfg_reg;
|
|
unsigned long flags;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base,
|
|
&pin_offset, &bank);
|
|
type = bank->type;
|
|
|
|
if (cfg_type >= PINCFG_TYPE_NUM || !type->fld_width[cfg_type])
|
|
return -EINVAL;
|
|
|
|
width = type->fld_width[cfg_type];
|
|
cfg_reg = type->reg_offset[cfg_type];
|
|
|
|
spin_lock_irqsave(&bank->slock, flags);
|
|
|
|
mask = (1 << width) - 1;
|
|
shift = pin_offset * width;
|
|
data = readl(reg_base + cfg_reg);
|
|
|
|
if (set) {
|
|
cfg_value = PINCFG_UNPACK_VALUE(*config);
|
|
data &= ~(mask << shift);
|
|
data |= (cfg_value << shift);
|
|
writel(data, reg_base + cfg_reg);
|
|
} else {
|
|
data >>= shift;
|
|
data &= mask;
|
|
*config = PINCFG_PACK(cfg_type, data);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&bank->slock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* set the pin config settings for a specified pin */
|
|
static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
ret = samsung_pinconf_rw(pctldev, pin, &configs[i], true);
|
|
if (ret < 0)
|
|
return ret;
|
|
} /* for each config */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* get the pin config settings for a specified pin */
|
|
static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
return samsung_pinconf_rw(pctldev, pin, config, false);
|
|
}
|
|
|
|
/* set the pin config settings for a specified pin group */
|
|
static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
const unsigned int *pins;
|
|
unsigned int cnt;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
pins = drvdata->pin_groups[group].pins;
|
|
|
|
for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
|
|
samsung_pinconf_set(pctldev, pins[cnt], configs, num_configs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* get the pin config settings for a specified pin group */
|
|
static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned int group, unsigned long *config)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
const unsigned int *pins;
|
|
|
|
drvdata = pinctrl_dev_get_drvdata(pctldev);
|
|
pins = drvdata->pin_groups[group].pins;
|
|
samsung_pinconf_get(pctldev, pins[0], config);
|
|
return 0;
|
|
}
|
|
|
|
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
|
|
static const struct pinconf_ops samsung_pinconf_ops = {
|
|
.pin_config_get = samsung_pinconf_get,
|
|
.pin_config_set = samsung_pinconf_set,
|
|
.pin_config_group_get = samsung_pinconf_group_get,
|
|
.pin_config_group_set = samsung_pinconf_group_set,
|
|
};
|
|
|
|
/* gpiolib gpio_set callback function */
|
|
static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
|
|
{
|
|
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
|
|
struct samsung_pin_bank_type *type = bank->type;
|
|
unsigned long flags;
|
|
void __iomem *reg;
|
|
u32 data;
|
|
|
|
reg = bank->drvdata->virt_base + bank->pctl_offset;
|
|
|
|
spin_lock_irqsave(&bank->slock, flags);
|
|
|
|
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
|
|
data &= ~(1 << offset);
|
|
if (value)
|
|
data |= 1 << offset;
|
|
writel(data, reg + type->reg_offset[PINCFG_TYPE_DAT]);
|
|
|
|
spin_unlock_irqrestore(&bank->slock, flags);
|
|
}
|
|
|
|
/* gpiolib gpio_get callback function */
|
|
static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
void __iomem *reg;
|
|
u32 data;
|
|
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
|
|
struct samsung_pin_bank_type *type = bank->type;
|
|
|
|
reg = bank->drvdata->virt_base + bank->pctl_offset;
|
|
|
|
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
|
|
data >>= offset;
|
|
data &= 1;
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* The calls to gpio_direction_output() and gpio_direction_input()
|
|
* leads to this function call.
|
|
*/
|
|
static int samsung_gpio_set_direction(struct gpio_chip *gc,
|
|
unsigned offset, bool input)
|
|
{
|
|
struct samsung_pin_bank_type *type;
|
|
struct samsung_pin_bank *bank;
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
void __iomem *reg;
|
|
u32 data, mask, shift;
|
|
unsigned long flags;
|
|
|
|
bank = gc_to_pin_bank(gc);
|
|
type = bank->type;
|
|
drvdata = bank->drvdata;
|
|
|
|
reg = drvdata->virt_base + bank->pctl_offset +
|
|
type->reg_offset[PINCFG_TYPE_FUNC];
|
|
|
|
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
|
|
shift = offset * type->fld_width[PINCFG_TYPE_FUNC];
|
|
if (shift >= 32) {
|
|
/* Some banks have two config registers */
|
|
shift -= 32;
|
|
reg += 4;
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->slock, flags);
|
|
|
|
data = readl(reg);
|
|
data &= ~(mask << shift);
|
|
if (!input)
|
|
data |= FUNC_OUTPUT << shift;
|
|
writel(data, reg);
|
|
|
|
spin_unlock_irqrestore(&bank->slock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* gpiolib gpio_direction_input callback function. */
|
|
static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
return samsung_gpio_set_direction(gc, offset, true);
|
|
}
|
|
|
|
/* gpiolib gpio_direction_output callback function. */
|
|
static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
samsung_gpio_set(gc, offset, value);
|
|
return samsung_gpio_set_direction(gc, offset, false);
|
|
}
|
|
|
|
/*
|
|
* gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
|
|
* and a virtual IRQ, if not already present.
|
|
*/
|
|
static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
|
|
unsigned int virq;
|
|
|
|
if (!bank->irq_domain)
|
|
return -ENXIO;
|
|
|
|
virq = irq_create_mapping(bank->irq_domain, offset);
|
|
|
|
return (virq) ? : -ENXIO;
|
|
}
|
|
|
|
static struct samsung_pin_group *samsung_pinctrl_create_groups(
|
|
struct device *dev,
|
|
struct samsung_pinctrl_drv_data *drvdata,
|
|
unsigned int *cnt)
|
|
{
|
|
struct pinctrl_desc *ctrldesc = &drvdata->pctl;
|
|
struct samsung_pin_group *groups, *grp;
|
|
const struct pinctrl_pin_desc *pdesc;
|
|
int i;
|
|
|
|
groups = devm_kzalloc(dev, ctrldesc->npins * sizeof(*groups),
|
|
GFP_KERNEL);
|
|
if (!groups)
|
|
return ERR_PTR(-EINVAL);
|
|
grp = groups;
|
|
|
|
pdesc = ctrldesc->pins;
|
|
for (i = 0; i < ctrldesc->npins; ++i, ++pdesc, ++grp) {
|
|
grp->name = pdesc->name;
|
|
grp->pins = &pdesc->number;
|
|
grp->num_pins = 1;
|
|
}
|
|
|
|
*cnt = ctrldesc->npins;
|
|
return groups;
|
|
}
|
|
|
|
static int samsung_pinctrl_create_function(struct device *dev,
|
|
struct samsung_pinctrl_drv_data *drvdata,
|
|
struct device_node *func_np,
|
|
struct samsung_pmx_func *func)
|
|
{
|
|
int npins;
|
|
int ret;
|
|
int i;
|
|
|
|
if (of_property_read_u32(func_np, "samsung,pin-function", &func->val))
|
|
return 0;
|
|
|
|
npins = of_property_count_strings(func_np, "samsung,pins");
|
|
if (npins < 1) {
|
|
dev_err(dev, "invalid pin list in %s node", func_np->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
func->name = func_np->full_name;
|
|
|
|
func->groups = devm_kzalloc(dev, npins * sizeof(char *), GFP_KERNEL);
|
|
if (!func->groups)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < npins; ++i) {
|
|
const char *gname;
|
|
|
|
ret = of_property_read_string_index(func_np, "samsung,pins",
|
|
i, &gname);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"failed to read pin name %d from %s node\n",
|
|
i, func_np->name);
|
|
return ret;
|
|
}
|
|
|
|
func->groups[i] = gname;
|
|
}
|
|
|
|
func->num_groups = npins;
|
|
return 1;
|
|
}
|
|
|
|
static struct samsung_pmx_func *samsung_pinctrl_create_functions(
|
|
struct device *dev,
|
|
struct samsung_pinctrl_drv_data *drvdata,
|
|
unsigned int *cnt)
|
|
{
|
|
struct samsung_pmx_func *functions, *func;
|
|
struct device_node *dev_np = dev->of_node;
|
|
struct device_node *cfg_np;
|
|
unsigned int func_cnt = 0;
|
|
int ret;
|
|
|
|
/*
|
|
* Iterate over all the child nodes of the pin controller node
|
|
* and create pin groups and pin function lists.
|
|
*/
|
|
for_each_child_of_node(dev_np, cfg_np) {
|
|
struct device_node *func_np;
|
|
|
|
if (!of_get_child_count(cfg_np)) {
|
|
if (!of_find_property(cfg_np,
|
|
"samsung,pin-function", NULL))
|
|
continue;
|
|
++func_cnt;
|
|
continue;
|
|
}
|
|
|
|
for_each_child_of_node(cfg_np, func_np) {
|
|
if (!of_find_property(func_np,
|
|
"samsung,pin-function", NULL))
|
|
continue;
|
|
++func_cnt;
|
|
}
|
|
}
|
|
|
|
functions = devm_kzalloc(dev, func_cnt * sizeof(*functions),
|
|
GFP_KERNEL);
|
|
if (!functions) {
|
|
dev_err(dev, "failed to allocate memory for function list\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
func = functions;
|
|
|
|
/*
|
|
* Iterate over all the child nodes of the pin controller node
|
|
* and create pin groups and pin function lists.
|
|
*/
|
|
func_cnt = 0;
|
|
for_each_child_of_node(dev_np, cfg_np) {
|
|
struct device_node *func_np;
|
|
|
|
if (!of_get_child_count(cfg_np)) {
|
|
ret = samsung_pinctrl_create_function(dev, drvdata,
|
|
cfg_np, func);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
if (ret > 0) {
|
|
++func;
|
|
++func_cnt;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
for_each_child_of_node(cfg_np, func_np) {
|
|
ret = samsung_pinctrl_create_function(dev, drvdata,
|
|
func_np, func);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
if (ret > 0) {
|
|
++func;
|
|
++func_cnt;
|
|
}
|
|
}
|
|
}
|
|
|
|
*cnt = func_cnt;
|
|
return functions;
|
|
}
|
|
|
|
/*
|
|
* Parse the information about all the available pin groups and pin functions
|
|
* from device node of the pin-controller. A pin group is formed with all
|
|
* the pins listed in the "samsung,pins" property.
|
|
*/
|
|
|
|
static int samsung_pinctrl_parse_dt(struct platform_device *pdev,
|
|
struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct samsung_pin_group *groups;
|
|
struct samsung_pmx_func *functions;
|
|
unsigned int grp_cnt = 0, func_cnt = 0;
|
|
|
|
groups = samsung_pinctrl_create_groups(dev, drvdata, &grp_cnt);
|
|
if (IS_ERR(groups)) {
|
|
dev_err(dev, "failed to parse pin groups\n");
|
|
return PTR_ERR(groups);
|
|
}
|
|
|
|
functions = samsung_pinctrl_create_functions(dev, drvdata, &func_cnt);
|
|
if (IS_ERR(functions)) {
|
|
dev_err(dev, "failed to parse pin functions\n");
|
|
return PTR_ERR(groups);
|
|
}
|
|
|
|
drvdata->pin_groups = groups;
|
|
drvdata->nr_groups = grp_cnt;
|
|
drvdata->pmx_functions = functions;
|
|
drvdata->nr_functions = func_cnt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* register the pinctrl interface with the pinctrl subsystem */
|
|
static int samsung_pinctrl_register(struct platform_device *pdev,
|
|
struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct pinctrl_desc *ctrldesc = &drvdata->pctl;
|
|
struct pinctrl_pin_desc *pindesc, *pdesc;
|
|
struct samsung_pin_bank *pin_bank;
|
|
char *pin_names;
|
|
int pin, bank, ret;
|
|
|
|
ctrldesc->name = "samsung-pinctrl";
|
|
ctrldesc->owner = THIS_MODULE;
|
|
ctrldesc->pctlops = &samsung_pctrl_ops;
|
|
ctrldesc->pmxops = &samsung_pinmux_ops;
|
|
ctrldesc->confops = &samsung_pinconf_ops;
|
|
|
|
pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
|
|
drvdata->ctrl->nr_pins, GFP_KERNEL);
|
|
if (!pindesc) {
|
|
dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
ctrldesc->pins = pindesc;
|
|
ctrldesc->npins = drvdata->ctrl->nr_pins;
|
|
|
|
/* dynamically populate the pin number and pin name for pindesc */
|
|
for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
|
|
pdesc->number = pin + drvdata->ctrl->base;
|
|
|
|
/*
|
|
* allocate space for storing the dynamically generated names for all
|
|
* the pins which belong to this pin-controller.
|
|
*/
|
|
pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
|
|
drvdata->ctrl->nr_pins, GFP_KERNEL);
|
|
if (!pin_names) {
|
|
dev_err(&pdev->dev, "mem alloc for pin names failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* for each pin, the name of the pin is pin-bank name + pin number */
|
|
for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) {
|
|
pin_bank = &drvdata->ctrl->pin_banks[bank];
|
|
for (pin = 0; pin < pin_bank->nr_pins; pin++) {
|
|
sprintf(pin_names, "%s-%d", pin_bank->name, pin);
|
|
pdesc = pindesc + pin_bank->pin_base + pin;
|
|
pdesc->name = pin_names;
|
|
pin_names += PIN_NAME_LENGTH;
|
|
}
|
|
}
|
|
|
|
ret = samsung_pinctrl_parse_dt(pdev, drvdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata);
|
|
if (!drvdata->pctl_dev) {
|
|
dev_err(&pdev->dev, "could not register pinctrl driver\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) {
|
|
pin_bank = &drvdata->ctrl->pin_banks[bank];
|
|
pin_bank->grange.name = pin_bank->name;
|
|
pin_bank->grange.id = bank;
|
|
pin_bank->grange.pin_base = drvdata->ctrl->base
|
|
+ pin_bank->pin_base;
|
|
pin_bank->grange.base = pin_bank->gpio_chip.base;
|
|
pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
|
|
pin_bank->grange.gc = &pin_bank->gpio_chip;
|
|
pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int samsung_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return pinctrl_request_gpio(chip->base + offset);
|
|
}
|
|
|
|
static void samsung_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
pinctrl_free_gpio(chip->base + offset);
|
|
}
|
|
|
|
static const struct gpio_chip samsung_gpiolib_chip = {
|
|
.request = samsung_gpio_request,
|
|
.free = samsung_gpio_free,
|
|
.set = samsung_gpio_set,
|
|
.get = samsung_gpio_get,
|
|
.direction_input = samsung_gpio_direction_input,
|
|
.direction_output = samsung_gpio_direction_output,
|
|
.to_irq = samsung_gpio_to_irq,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
/* register the gpiolib interface with the gpiolib subsystem */
|
|
static int samsung_gpiolib_register(struct platform_device *pdev,
|
|
struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
|
|
struct samsung_pin_bank *bank = ctrl->pin_banks;
|
|
struct gpio_chip *gc;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
bank->gpio_chip = samsung_gpiolib_chip;
|
|
|
|
gc = &bank->gpio_chip;
|
|
gc->base = ctrl->base + bank->pin_base;
|
|
gc->ngpio = bank->nr_pins;
|
|
gc->dev = &pdev->dev;
|
|
gc->of_node = bank->of_node;
|
|
gc->label = bank->name;
|
|
|
|
ret = gpiochip_add(gc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
|
|
gc->label, ret);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
for (--i, --bank; i >= 0; --i, --bank)
|
|
gpiochip_remove(&bank->gpio_chip);
|
|
return ret;
|
|
}
|
|
|
|
/* unregister the gpiolib interface with the gpiolib subsystem */
|
|
static int samsung_gpiolib_unregister(struct platform_device *pdev,
|
|
struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
|
|
struct samsung_pin_bank *bank = ctrl->pin_banks;
|
|
int i;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank)
|
|
gpiochip_remove(&bank->gpio_chip);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id samsung_pinctrl_dt_match[];
|
|
|
|
/* retrieve the soc specific data */
|
|
static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
|
|
struct samsung_pinctrl_drv_data *d,
|
|
struct platform_device *pdev)
|
|
{
|
|
int id;
|
|
const struct of_device_id *match;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct device_node *np;
|
|
struct samsung_pin_ctrl *ctrl;
|
|
struct samsung_pin_bank *bank;
|
|
int i;
|
|
|
|
id = of_alias_get_id(node, "pinctrl");
|
|
if (id < 0) {
|
|
dev_err(&pdev->dev, "failed to get alias id\n");
|
|
return NULL;
|
|
}
|
|
match = of_match_node(samsung_pinctrl_dt_match, node);
|
|
ctrl = (struct samsung_pin_ctrl *)match->data + id;
|
|
|
|
bank = ctrl->pin_banks;
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
spin_lock_init(&bank->slock);
|
|
bank->drvdata = d;
|
|
bank->pin_base = ctrl->nr_pins;
|
|
ctrl->nr_pins += bank->nr_pins;
|
|
}
|
|
|
|
for_each_child_of_node(node, np) {
|
|
if (!of_find_property(np, "gpio-controller", NULL))
|
|
continue;
|
|
bank = ctrl->pin_banks;
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
if (!strcmp(bank->name, np->name)) {
|
|
bank->of_node = np;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
ctrl->base = pin_base;
|
|
pin_base += ctrl->nr_pins;
|
|
|
|
return ctrl;
|
|
}
|
|
|
|
static int samsung_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
struct device *dev = &pdev->dev;
|
|
struct samsung_pin_ctrl *ctrl;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (!dev->of_node) {
|
|
dev_err(dev, "device tree node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
|
|
if (!drvdata) {
|
|
dev_err(dev, "failed to allocate memory for driver's "
|
|
"private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev);
|
|
if (!ctrl) {
|
|
dev_err(&pdev->dev, "driver data not available\n");
|
|
return -EINVAL;
|
|
}
|
|
drvdata->ctrl = ctrl;
|
|
drvdata->dev = dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(drvdata->virt_base))
|
|
return PTR_ERR(drvdata->virt_base);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (res)
|
|
drvdata->irq = res->start;
|
|
|
|
ret = samsung_gpiolib_register(pdev, drvdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = samsung_pinctrl_register(pdev, drvdata);
|
|
if (ret) {
|
|
samsung_gpiolib_unregister(pdev, drvdata);
|
|
return ret;
|
|
}
|
|
|
|
if (ctrl->eint_gpio_init)
|
|
ctrl->eint_gpio_init(drvdata);
|
|
if (ctrl->eint_wkup_init)
|
|
ctrl->eint_wkup_init(drvdata);
|
|
|
|
platform_set_drvdata(pdev, drvdata);
|
|
|
|
/* Add to the global list */
|
|
list_add_tail(&drvdata->node, &drvdata_list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/**
|
|
* samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device
|
|
*
|
|
* Save data for all banks handled by this device.
|
|
*/
|
|
static void samsung_pinctrl_suspend_dev(
|
|
struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
|
|
void __iomem *virt_base = drvdata->virt_base;
|
|
int i;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; i++) {
|
|
struct samsung_pin_bank *bank = &ctrl->pin_banks[i];
|
|
void __iomem *reg = virt_base + bank->pctl_offset;
|
|
|
|
u8 *offs = bank->type->reg_offset;
|
|
u8 *widths = bank->type->fld_width;
|
|
enum pincfg_type type;
|
|
|
|
/* Registers without a powerdown config aren't lost */
|
|
if (!widths[PINCFG_TYPE_CON_PDN])
|
|
continue;
|
|
|
|
for (type = 0; type < PINCFG_TYPE_NUM; type++)
|
|
if (widths[type])
|
|
bank->pm_save[type] = readl(reg + offs[type]);
|
|
|
|
if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
|
|
/* Some banks have two config registers */
|
|
bank->pm_save[PINCFG_TYPE_NUM] =
|
|
readl(reg + offs[PINCFG_TYPE_FUNC] + 4);
|
|
pr_debug("Save %s @ %p (con %#010x %08x)\n",
|
|
bank->name, reg,
|
|
bank->pm_save[PINCFG_TYPE_FUNC],
|
|
bank->pm_save[PINCFG_TYPE_NUM]);
|
|
} else {
|
|
pr_debug("Save %s @ %p (con %#010x)\n", bank->name,
|
|
reg, bank->pm_save[PINCFG_TYPE_FUNC]);
|
|
}
|
|
}
|
|
|
|
if (ctrl->suspend)
|
|
ctrl->suspend(drvdata);
|
|
}
|
|
|
|
/**
|
|
* samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device
|
|
*
|
|
* Restore one of the banks that was saved during suspend.
|
|
*
|
|
* We don't bother doing anything complicated to avoid glitching lines since
|
|
* we're called before pad retention is turned off.
|
|
*/
|
|
static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata)
|
|
{
|
|
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
|
|
void __iomem *virt_base = drvdata->virt_base;
|
|
int i;
|
|
|
|
if (ctrl->resume)
|
|
ctrl->resume(drvdata);
|
|
|
|
for (i = 0; i < ctrl->nr_banks; i++) {
|
|
struct samsung_pin_bank *bank = &ctrl->pin_banks[i];
|
|
void __iomem *reg = virt_base + bank->pctl_offset;
|
|
|
|
u8 *offs = bank->type->reg_offset;
|
|
u8 *widths = bank->type->fld_width;
|
|
enum pincfg_type type;
|
|
|
|
/* Registers without a powerdown config aren't lost */
|
|
if (!widths[PINCFG_TYPE_CON_PDN])
|
|
continue;
|
|
|
|
if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
|
|
/* Some banks have two config registers */
|
|
pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n",
|
|
bank->name, reg,
|
|
readl(reg + offs[PINCFG_TYPE_FUNC]),
|
|
readl(reg + offs[PINCFG_TYPE_FUNC] + 4),
|
|
bank->pm_save[PINCFG_TYPE_FUNC],
|
|
bank->pm_save[PINCFG_TYPE_NUM]);
|
|
writel(bank->pm_save[PINCFG_TYPE_NUM],
|
|
reg + offs[PINCFG_TYPE_FUNC] + 4);
|
|
} else {
|
|
pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name,
|
|
reg, readl(reg + offs[PINCFG_TYPE_FUNC]),
|
|
bank->pm_save[PINCFG_TYPE_FUNC]);
|
|
}
|
|
for (type = 0; type < PINCFG_TYPE_NUM; type++)
|
|
if (widths[type])
|
|
writel(bank->pm_save[type], reg + offs[type]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* samsung_pinctrl_suspend - save pinctrl state for suspend
|
|
*
|
|
* Save data for all banks across all devices.
|
|
*/
|
|
static int samsung_pinctrl_suspend(void)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
|
|
list_for_each_entry(drvdata, &drvdata_list, node) {
|
|
samsung_pinctrl_suspend_dev(drvdata);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* samsung_pinctrl_resume - restore pinctrl state for suspend
|
|
*
|
|
* Restore data for all banks across all devices.
|
|
*/
|
|
static void samsung_pinctrl_resume(void)
|
|
{
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
|
|
list_for_each_entry_reverse(drvdata, &drvdata_list, node) {
|
|
samsung_pinctrl_resume_dev(drvdata);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define samsung_pinctrl_suspend NULL
|
|
#define samsung_pinctrl_resume NULL
|
|
#endif
|
|
|
|
static struct syscore_ops samsung_pinctrl_syscore_ops = {
|
|
.suspend = samsung_pinctrl_suspend,
|
|
.resume = samsung_pinctrl_resume,
|
|
};
|
|
|
|
static const struct of_device_id samsung_pinctrl_dt_match[] = {
|
|
#ifdef CONFIG_PINCTRL_EXYNOS
|
|
{ .compatible = "samsung,exynos3250-pinctrl",
|
|
.data = (void *)exynos3250_pin_ctrl },
|
|
{ .compatible = "samsung,exynos4210-pinctrl",
|
|
.data = (void *)exynos4210_pin_ctrl },
|
|
{ .compatible = "samsung,exynos4x12-pinctrl",
|
|
.data = (void *)exynos4x12_pin_ctrl },
|
|
{ .compatible = "samsung,exynos5250-pinctrl",
|
|
.data = (void *)exynos5250_pin_ctrl },
|
|
{ .compatible = "samsung,exynos5260-pinctrl",
|
|
.data = (void *)exynos5260_pin_ctrl },
|
|
{ .compatible = "samsung,exynos5420-pinctrl",
|
|
.data = (void *)exynos5420_pin_ctrl },
|
|
{ .compatible = "samsung,s5pv210-pinctrl",
|
|
.data = (void *)s5pv210_pin_ctrl },
|
|
#endif
|
|
#ifdef CONFIG_PINCTRL_S3C64XX
|
|
{ .compatible = "samsung,s3c64xx-pinctrl",
|
|
.data = s3c64xx_pin_ctrl },
|
|
#endif
|
|
#ifdef CONFIG_PINCTRL_S3C24XX
|
|
{ .compatible = "samsung,s3c2412-pinctrl",
|
|
.data = s3c2412_pin_ctrl },
|
|
{ .compatible = "samsung,s3c2416-pinctrl",
|
|
.data = s3c2416_pin_ctrl },
|
|
{ .compatible = "samsung,s3c2440-pinctrl",
|
|
.data = s3c2440_pin_ctrl },
|
|
{ .compatible = "samsung,s3c2450-pinctrl",
|
|
.data = s3c2450_pin_ctrl },
|
|
#endif
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
|
|
|
|
static struct platform_driver samsung_pinctrl_driver = {
|
|
.probe = samsung_pinctrl_probe,
|
|
.driver = {
|
|
.name = "samsung-pinctrl",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = samsung_pinctrl_dt_match,
|
|
},
|
|
};
|
|
|
|
static int __init samsung_pinctrl_drv_register(void)
|
|
{
|
|
/*
|
|
* Register syscore ops for save/restore of registers across suspend.
|
|
* It's important to ensure that this driver is running at an earlier
|
|
* initcall level than any arch-specific init calls that install syscore
|
|
* ops that turn off pad retention (like exynos_pm_resume).
|
|
*/
|
|
register_syscore_ops(&samsung_pinctrl_syscore_ops);
|
|
|
|
return platform_driver_register(&samsung_pinctrl_driver);
|
|
}
|
|
postcore_initcall(samsung_pinctrl_drv_register);
|
|
|
|
static void __exit samsung_pinctrl_drv_unregister(void)
|
|
{
|
|
platform_driver_unregister(&samsung_pinctrl_driver);
|
|
}
|
|
module_exit(samsung_pinctrl_drv_unregister);
|
|
|
|
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
|
|
MODULE_DESCRIPTION("Samsung pinctrl driver");
|
|
MODULE_LICENSE("GPL v2");
|