Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-11 06:31:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
130c1ccbf5
linux/arch/m68k/include/asm/mac_via.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

280 lines
11 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* 6522 Versatile Interface Adapter (VIA)
*
* There are two of these on the Mac II. Some IRQ's are vectored
* via them as are assorted bits and bobs - eg rtc, adb. The picture
* is a bit incomplete as the Mac documentation doesn't cover this well
*/
#ifndef _ASM_MAC_VIA_H_
#define _ASM_MAC_VIA_H_
/*
* Base addresses for the VIAs. There are two in every machine,
* although on some machines the second is an RBV or an OSS.
* The OSS is different enough that it's handled separately.
*
* Do not use these values directly; use the via1 and via2 variables
* instead (and don't forget to check rbv_present when using via2!)
*/
#define VIA1_BASE (0x50F00000)
#define VIA2_BASE (0x50F02000)
#define RBV_BASE (0x50F26000)
/*
* Not all of these are true post MacII I think.
* CSA: probably the ones CHRP marks as 'unused' change purposes
* when the IWM becomes the SWIM.
* http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
* ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
*
* also, http://developer.apple.com/technotes/hw/hw_09.html claims the
* following changes for IIfx:
* VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
* Also, "All of the functionality of VIA2 has been moved to other chips".
*/
#define VIA1A_vSccWrReq 0x80 /* SCC write. (input)
* [CHRP] SCC WREQ: Reflects the state of the
* Wait/Request pins from the SCC.
* [Macintosh Family Hardware]
* as CHRP on SE/30,II,IIx,IIcx,IIci.
* on IIfx, "0 means an active request"
*/
#define VIA1A_vRev8 0x40 /* Revision 8 board ???
* [CHRP] En WaitReqB: Lets the WaitReq_L
* signal from port B of the SCC appear on
* the PA7 input pin. Output.
* [Macintosh Family] On the SE/30, this
* is the bit to flip screen buffers.
* 0=alternate, 1=main.
* on II,IIx,IIcx,IIci,IIfx this is a bit
* for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
*/
#define VIA1A_vHeadSel 0x20 /* Head select for IWM.
* [CHRP] unused.
* [Macintosh Family] "Floppy disk
* state-control line SEL" on all but IIfx
*/
#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx
* this bit enables the "Overlay" address
* map in the address decoders as it is on
* reset for mapping the ROM over the reset
* vector. 1=use overlay map.
* On the IIci,IIfx it is another bit of the
* CPU ID: 0=normal IIci, 1=IIci with parity
* feature or IIfx.
* [CHRP] En WaitReqA: Lets the WaitReq_L
* signal from port A of the SCC appear
* on the PA7 input pin (CHRP). Output.
* [MkLinux] "Drive Select"
* (with 0x20 being 'disk head select')
*/
#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select:
* 1: select the external serial clock to
* drive the SCC's /RTxCA pin.
* 0: Select the 3.6864MHz clock to drive
* the SCC cell.
* [Macintosh Family] Correct on all but IIfx
*/
/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
* on Macs which had the PWM sound hardware. Reserved on newer models.
* On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
* bit 2: 1=IIci, 0=IIfx
* bit 1: 1 on both IIci and IIfx.
* MkLinux sez bit 0 is 'burnin flag' in this case.
* CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
* inputs, these bits will read 0.
*/
#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
* CHRP offers no info. */
#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with
* PWM hardware) 0=enabled.
* Also, on IIci w/parity, shows parity error
* 0=error, 1=OK. */
#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled
* On SE/30, vertical sync interrupt enable.
* 0=enabled. This vSync interrupt shows up
* as a slot $E interrupt. */
#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
/* MkLinux defines the following "VIA1 Register B contents where they
* differ from standard VIA1". From the naming scheme, we assume they
* correspond to a VIA work-alike named 'EVR'. */
#define EVRB_XCVR 0x08 /* XCVR_SESSION* */
#define EVRB_FULL 0x10 /* VIA_FULL */
#define EVRB_SYSES 0x20 /* SYS_SESSION */
#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */
#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */
#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */
#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */
/*
* VIA2 A register is the interrupt lines raised off the nubus
* slots.
* The below info is from 'Macintosh Family Hardware.'
* MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
* It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
* defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
* Perhaps OSS uses vRAM1 and vRAM2 for ADB.
*/
#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
/* RAM size bits decoded as follows:
* bit1 bit0 size of ICs in bank A
* 0 0 256 kbit
* 0 1 1 Mbit
* 1 0 4 Mbit
* 1 1 16 Mbit
*/
/*
* Register B has the fun stuff in it
*/
#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by
* timer T1.
* on IIci, parity test: 0=test mode.
* [MkLinux] RBV_PARODD: 1=odd,0=even. */
#define VIA2B_vSndJck 0x40 /* External sound jack status.
* 0=plug is inserted. On SE/30, always 0 */
#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush
* on II, AMU/PMMU control.
* if AMU, 0=24bit to 32bit translation
* if PMMU, 1=PMMU is accessing page table.
* on SE/30 tied low.
* on IIx,IIcx,IIfx, unused.
* on IIci/RBV, cache control. 0=flush cache.
*/
#define VIA2B_vPower 0x04 /* Power off, 0=shut off power.
* on SE/30 this signal sent to PDS card. */
#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked.
* on SE/30 sent to PDS card. */
#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card
* on others, 0=disable processor's instruction
* and data caches. */
/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
* Another example of a valid function that has no ROM support is the use
* of the alternate video page for page-flipping animation. Since there
* is no ROM call to flip pages, it is necessary to go play with the
* right bit in the VIA chip (6522 Versatile Interface Adapter).
* [CSA: don't know which one this is, but it's one of 'em!]
*/
/*
* 6522 registers - see databook.
* CSA: Assignments for VIA1 confirmed from CHRP spec.
*/
/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
/* Note: 15 VIA regs, 8 RBV regs */
#define vBufB 0x0000 /* [VIA/RBV] Register B */
#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
#define vSR 0x1400 /* [VIA only] Shift register. */
#define vACR 0x1600 /* [VIA only] Auxiliary control register. */
#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
/* CHRP sez never ever to *write* this.
* Mac family says never to *change* this.
* In fact we need to initialize it once at start. */
#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
/* The RBV only decodes the bottom eight address lines; the VIA doesn't
* decode the bottom eight -- so vBufB | rBufB will always get you BufB */
/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
* BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
* to matter. In fact *all* of the top 8 bits seem to matter;
* setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
* Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
*/
#define rBufB 0x0000 /* [VIA/RBV] Register B */
#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */
#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */
#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */
#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */
#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */
#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */
#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */
#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */
/*
* Video monitor parameters, for rMonP:
*/
#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */
#define RBV_MONID 0x38 /* monitor type, as below. */
#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */
/* Supported monitor types: */
#define MON_15BW (1<<3) /* 15" BW portrait. */
#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */
#define MON_15RGB (5<<3) /* 15" RGB portrait. */
#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
#define MON_NONE (7<<3) /* No monitor attached. */
/* To clarify IER manipulations */
#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
#ifndef __ASSEMBLY__
extern volatile __u8 *via1,*via2;
extern int rbv_present,via_alt_mapping;
struct irq_desc;
extern void via_register_interrupts(void);
extern void via_irq_enable(int);
extern void via_irq_disable(int);
extern void via_nubus_irq_startup(int irq);
extern void via_nubus_irq_shutdown(int irq);
extern void via1_irq(struct irq_desc *desc);
extern void via1_set_head(int);
extern int via2_scsi_drq_pending(void);
static inline int rbv_set_video_bpp(int bpp)
{
char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
if (!rbv_present || val<0) return -1;
via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
return 0;
}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_MAC_VIA_H_ */
Reference in New Issue View Git Blame Copy Permalink