linux/arch/powerpc/kernel/ftrace.c
Linus Torvalds 140cd7fb04 powerpc updates for 3.19
Some nice cleanups like removing bootmem, and removal of __get_cpu_var().
 
 There is one patch to mm/gup.c. This is the generic GUP implementation, but is
 only used by us and arm(64). We have an ack from Steve Capper, and although we
 didn't get an ack from Andrew he told us to take the patch through the powerpc
 tree.
 
 There's one cxl patch. This is in drivers/misc, but Greg said he was happy for
 us to manage fixes for it.
 
 There is an infrastructure patch to support an IPMI driver for OPAL. That patch
 also appears in Corey Minyard's IPMI tree, you may see a conflict there.
 
 There is also an RTC driver for OPAL. We weren't able to get any response from
 the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver.
 
 The usual batch of Freescale updates from Scott.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUiSTSAAoJEFHr6jzI4aWAirQP/3rIEng0LzLu5kW2zkGylIaM
 SNDum1vze3mHiTFl+CFcSIGpC1UEULoB49HA+2oE/ExKpIceG6lpL2LP+wNh2FW5
 mozjMjS6mZt4w1Fu1D2ZtgQc3O1T1pxkqsnZmPa8gVf5k5d5IQNPY6yB0pgVWwbV
 gwBKxe4VwPAzJjppE9i9MDhNTJwmHZq0lI8XuoTXOOU/f+4G1WxmjrbyveQ7cRP5
 i/sq2cKjxpWA+KDeIXo0GR0DpXR7qMeAvFX5xXY7oKuUJIFDM4kSHfmMYP6qLf5c
 2vlsJqHVqfOgQdve41z1ooaPzNtg7ezVo+VqqguSgtSgwy2JUo/uHpnzz3gD1Olo
 AP5+6xj8LZac0rTPxF4n4Hoyrp7AaaFjEFt1zqT9PWniZW4B41wtia0QORBNUf1S
 UEmKAC9T3WZJ47mH7WMSadtOPF9E3Yd/zuiPD4udtptCNKPbr6/k1MpJPIW2D4Rn
 BJ0QZTRd7V0yRofXxZtHxaMxq8pWd/Tip7J/zr/ghz+ulnH8BuFamuhCCLuJlESU
 +A2PMfuseyTMpH9sMAmmTwSGPDKjaUFWvmFvY/n88NZL7r2LlomNrDWFSSQOIHUP
 FxjYmjUMpZeexsfyRdgFV/INhYC3o3cso2fRGO45YK6nkxNnjNFEBS6WhQLvNLBu
 sknd1WjXkuJtoMC15SrQ
 =jvyT
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:
 "Some nice cleanups like removing bootmem, and removal of
  __get_cpu_var().

  There is one patch to mm/gup.c.  This is the generic GUP
  implementation, but is only used by us and arm(64).  We have an ack
  from Steve Capper, and although we didn't get an ack from Andrew he
  told us to take the patch through the powerpc tree.

  There's one cxl patch.  This is in drivers/misc, but Greg said he was
  happy for us to manage fixes for it.

  There is an infrastructure patch to support an IPMI driver for OPAL.

  There is also an RTC driver for OPAL.  We weren't able to get any
  response from the RTC maintainer, Alessandro Zummo, so in the end we
  just merged the driver.

  The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
  powerpc/powernv: Return to cpu offline loop when finished in KVM guest
  powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
  powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
  powerpc/xmon: Cleanup the breakpoint flags
  powerpc/xmon: Enable HW instruction breakpoint on POWER8
  powerpc/mm/thp: Use tlbiel if possible
  powerpc/mm/thp: Remove code duplication
  powerpc/mm/hugetlb: Sanity check gigantic hugepage count
  powerpc/oprofile: Disable pagefaults during user stack read
  powerpc/mm: Check for matching hpte without taking hpte lock
  powerpc: Drop useless warning in eeh_init()
  powerpc/powernv: Cleanup unused MCE definitions/declarations.
  powerpc/eeh: Dump PHB diag-data early
  powerpc/eeh: Recover EEH error on ownership change for BCM5719
  powerpc/eeh: Set EEH_PE_RESET on PE reset
  powerpc/eeh: Refactor eeh_reset_pe()
  powerpc: Remove more traces of bootmem
  powerpc/pseries: Initialise nvram_pstore_info's buf_lock
  cxl: Name interrupts in /proc/interrupt
  cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  ...
2014-12-11 17:48:14 -08:00

552 lines
13 KiB
C

/*
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
*
* Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box.
*
* Added function graph tracer code, taken from x86 that was written
* by Frederic Weisbecker, and ported to PPC by Steven Rostedt.
*
*/
#define pr_fmt(fmt) "ftrace-powerpc: " fmt
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/list.h>
#include <asm/cacheflush.h>
#include <asm/code-patching.h>
#include <asm/ftrace.h>
#include <asm/syscall.h>
#ifdef CONFIG_DYNAMIC_FTRACE
static unsigned int
ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
unsigned int op;
addr = ppc_function_entry((void *)addr);
/* if (link) set op to 'bl' else 'b' */
op = create_branch((unsigned int *)ip, addr, link ? 1 : 0);
return op;
}
static int
ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
{
unsigned int replaced;
/*
* Note: Due to modules and __init, code can
* disappear and change, we need to protect against faulting
* as well as code changing. We do this by using the
* probe_kernel_* functions.
*
* No real locking needed, this code is run through
* kstop_machine, or before SMP starts.
*/
/* read the text we want to modify */
if (probe_kernel_read(&replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
if (replaced != old)
return -EINVAL;
/* replace the text with the new text */
if (patch_instruction((unsigned int *)ip, new))
return -EPERM;
return 0;
}
/*
* Helper functions that are the same for both PPC64 and PPC32.
*/
static int test_24bit_addr(unsigned long ip, unsigned long addr)
{
addr = ppc_function_entry((void *)addr);
/* use the create_branch to verify that this offset can be branched */
return create_branch((unsigned int *)ip, addr, 0);
}
#ifdef CONFIG_MODULES
static int is_bl_op(unsigned int op)
{
return (op & 0xfc000003) == 0x48000001;
}
static unsigned long find_bl_target(unsigned long ip, unsigned int op)
{
static int offset;
offset = (op & 0x03fffffc);
/* make it signed */
if (offset & 0x02000000)
offset |= 0xfe000000;
return ip + (long)offset;
}
#ifdef CONFIG_PPC64
static int
__ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op;
unsigned long entry, ptr;
unsigned long ip = rec->ip;
void *tramp;
/* read where this goes */
if (probe_kernel_read(&op, (void *)ip, sizeof(int)))
return -EFAULT;
/* Make sure that that this is still a 24bit jump */
if (!is_bl_op(op)) {
pr_err("Not expected bl: opcode is %x\n", op);
return -EINVAL;
}
/* lets find where the pointer goes */
tramp = (void *)find_bl_target(ip, op);
pr_devel("ip:%lx jumps to %p", ip, tramp);
if (!is_module_trampoline(tramp)) {
pr_err("Not a trampoline\n");
return -EINVAL;
}
if (module_trampoline_target(mod, tramp, &ptr)) {
pr_err("Failed to get trampoline target\n");
return -EFAULT;
}
pr_devel("trampoline target %lx", ptr);
entry = ppc_global_function_entry((void *)addr);
/* This should match what was called */
if (ptr != entry) {
pr_err("addr %lx does not match expected %lx\n", ptr, entry);
return -EINVAL;
}
/*
* Our original call site looks like:
*
* bl <tramp>
* ld r2,XX(r1)
*
* Milton Miller pointed out that we can not simply nop the branch.
* If a task was preempted when calling a trace function, the nops
* will remove the way to restore the TOC in r2 and the r2 TOC will
* get corrupted.
*
* Use a b +8 to jump over the load.
*/
op = 0x48000008; /* b +8 */
if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
return 0;
}
#else /* !PPC64 */
static int
__ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op;
unsigned int jmp[4];
unsigned long ip = rec->ip;
unsigned long tramp;
if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure that that this is still a 24bit jump */
if (!is_bl_op(op)) {
pr_err("Not expected bl: opcode is %x\n", op);
return -EINVAL;
}
/* lets find where the pointer goes */
tramp = find_bl_target(ip, op);
/*
* On PPC32 the trampoline looks like:
* 0x3d, 0x80, 0x00, 0x00 lis r12,sym@ha
* 0x39, 0x8c, 0x00, 0x00 addi r12,r12,sym@l
* 0x7d, 0x89, 0x03, 0xa6 mtctr r12
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
pr_devel("ip:%lx jumps to %lx", ip, tramp);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
pr_err("Failed to read %lx\n", tramp);
return -EFAULT;
}
pr_devel(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d800000) ||
((jmp[1] & 0xffff0000) != 0x398c0000) ||
(jmp[2] != 0x7d8903a6) ||
(jmp[3] != 0x4e800420)) {
pr_err("Not a trampoline\n");
return -EINVAL;
}
tramp = (jmp[1] & 0xffff) |
((jmp[0] & 0xffff) << 16);
if (tramp & 0x8000)
tramp -= 0x10000;
pr_devel(" %lx ", tramp);
if (tramp != addr) {
pr_err("Trampoline location %08lx does not match addr\n",
tramp);
return -EINVAL;
}
op = PPC_INST_NOP;
if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
return 0;
}
#endif /* PPC64 */
#endif /* CONFIG_MODULES */
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
unsigned int old, new;
/*
* If the calling address is more that 24 bits away,
* then we had to use a trampoline to make the call.
* Otherwise just update the call site.
*/
if (test_24bit_addr(ip, addr)) {
/* within range */
old = ftrace_call_replace(ip, addr, 1);
new = PPC_INST_NOP;
return ftrace_modify_code(ip, old, new);
}
#ifdef CONFIG_MODULES
/*
* Out of range jumps are called from modules.
* We should either already have a pointer to the module
* or it has been passed in.
*/
if (!rec->arch.mod) {
if (!mod) {
pr_err("No module loaded addr=%lx\n", addr);
return -EFAULT;
}
rec->arch.mod = mod;
} else if (mod) {
if (mod != rec->arch.mod) {
pr_err("Record mod %p not equal to passed in mod %p\n",
rec->arch.mod, mod);
return -EINVAL;
}
/* nothing to do if mod == rec->arch.mod */
} else
mod = rec->arch.mod;
return __ftrace_make_nop(mod, rec, addr);
#else
/* We should not get here without modules */
return -EINVAL;
#endif /* CONFIG_MODULES */
}
#ifdef CONFIG_MODULES
#ifdef CONFIG_PPC64
static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op[2];
void *ip = (void *)rec->ip;
/* read where this goes */
if (probe_kernel_read(op, ip, sizeof(op)))
return -EFAULT;
/*
* We expect to see:
*
* b +8
* ld r2,XX(r1)
*
* The load offset is different depending on the ABI. For simplicity
* just mask it out when doing the compare.
*/
if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) {
pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]);
return -EINVAL;
}
/* If we never set up a trampoline to ftrace_caller, then bail */
if (!rec->arch.mod->arch.tramp) {
pr_err("No ftrace trampoline\n");
return -EINVAL;
}
/* Ensure branch is within 24 bits */
if (!create_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
pr_err("Branch out of range\n");
return -EINVAL;
}
if (patch_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) {
pr_err("REL24 out of range!\n");
return -EINVAL;
}
return 0;
}
#else
static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int op;
unsigned long ip = rec->ip;
/* read where this goes */
if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* It should be pointing to a nop */
if (op != PPC_INST_NOP) {
pr_err("Expected NOP but have %x\n", op);
return -EINVAL;
}
/* If we never set up a trampoline to ftrace_caller, then bail */
if (!rec->arch.mod->arch.tramp) {
pr_err("No ftrace trampoline\n");
return -EINVAL;
}
/* create the branch to the trampoline */
op = create_branch((unsigned int *)ip,
rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
if (!op) {
pr_err("REL24 out of range!\n");
return -EINVAL;
}
pr_devel("write to %lx\n", rec->ip);
if (patch_instruction((unsigned int *)ip, op))
return -EPERM;
return 0;
}
#endif /* CONFIG_PPC64 */
#endif /* CONFIG_MODULES */
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
unsigned int old, new;
/*
* If the calling address is more that 24 bits away,
* then we had to use a trampoline to make the call.
* Otherwise just update the call site.
*/
if (test_24bit_addr(ip, addr)) {
/* within range */
old = PPC_INST_NOP;
new = ftrace_call_replace(ip, addr, 1);
return ftrace_modify_code(ip, old, new);
}
#ifdef CONFIG_MODULES
/*
* Out of range jumps are called from modules.
* Being that we are converting from nop, it had better
* already have a module defined.
*/
if (!rec->arch.mod) {
pr_err("No module loaded\n");
return -EINVAL;
}
return __ftrace_make_call(rec, addr);
#else
/* We should not get here without modules */
return -EINVAL;
#endif /* CONFIG_MODULES */
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
unsigned int old, new;
int ret;
old = *(unsigned int *)&ftrace_call;
new = ftrace_call_replace(ip, (unsigned long)func, 1);
ret = ftrace_modify_code(ip, old, new);
return ret;
}
static int __ftrace_replace_code(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_addr = (unsigned long)FTRACE_ADDR;
int ret;
ret = ftrace_update_record(rec, enable);
switch (ret) {
case FTRACE_UPDATE_IGNORE:
return 0;
case FTRACE_UPDATE_MAKE_CALL:
return ftrace_make_call(rec, ftrace_addr);
case FTRACE_UPDATE_MAKE_NOP:
return ftrace_make_nop(NULL, rec, ftrace_addr);
}
return 0;
}
void ftrace_replace_code(int enable)
{
struct ftrace_rec_iter *iter;
struct dyn_ftrace *rec;
int ret;
for (iter = ftrace_rec_iter_start(); iter;
iter = ftrace_rec_iter_next(iter)) {
rec = ftrace_rec_iter_record(iter);
ret = __ftrace_replace_code(rec, enable);
if (ret) {
ftrace_bug(ret, rec);
return;
}
}
}
void arch_ftrace_update_code(int command)
{
if (command & FTRACE_UPDATE_CALLS)
ftrace_replace_code(1);
else if (command & FTRACE_DISABLE_CALLS)
ftrace_replace_code(0);
if (command & FTRACE_UPDATE_TRACE_FUNC)
ftrace_update_ftrace_func(ftrace_trace_function);
if (command & FTRACE_START_FUNC_RET)
ftrace_enable_ftrace_graph_caller();
else if (command & FTRACE_STOP_FUNC_RET)
ftrace_disable_ftrace_graph_caller();
}
int __init ftrace_dyn_arch_init(void)
{
return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
extern void ftrace_graph_stub(void);
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
unsigned long addr = (unsigned long)(&ftrace_graph_caller);
unsigned long stub = (unsigned long)(&ftrace_graph_stub);
unsigned int old, new;
old = ftrace_call_replace(ip, stub, 0);
new = ftrace_call_replace(ip, addr, 0);
return ftrace_modify_code(ip, old, new);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
unsigned long addr = (unsigned long)(&ftrace_graph_caller);
unsigned long stub = (unsigned long)(&ftrace_graph_stub);
unsigned int old, new;
old = ftrace_call_replace(ip, addr, 0);
new = ftrace_call_replace(ip, stub, 0);
return ftrace_modify_code(ip, old, new);
}
#endif /* CONFIG_DYNAMIC_FTRACE */
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info. Return the address we want to divert to.
*/
unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
{
struct ftrace_graph_ent trace;
unsigned long return_hooker;
if (unlikely(ftrace_graph_is_dead()))
goto out;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
goto out;
return_hooker = ppc_function_entry(return_to_handler);
trace.func = ip;
trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace))
goto out;
if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
goto out;
parent = return_hooker;
out:
return parent;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64)
unsigned long __init arch_syscall_addr(int nr)
{
return sys_call_table[nr*2];
}
#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 */