mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 07:01:57 +00:00
99eeb8dfb1
The driver is usable on the newer SAM9 processors so replace all text references to AT91RM9200 with just AT91. The controller bug where all the words are byte-swapped is fixed on the AT91SAM9 processors. The byte-swapping work-around therefore only needs to be done if cpu_is_at91rm9200(). [Original patch from Wojtek Kaniewski] The AT91RM9200 and AT91SAM9260 processors support two MMC/SD slots - the slot which is connected is now passed via the platform_data and the correct slot selected in the AT91_MCI_SDCR register. The driver should not be calling at91_set_gpio_output() since the VCC pin should have already been configured as an output in the processor/board setup code. The driver should call at91_set_gpio_value(). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> |
||
|---|---|---|
| .. | ||
| at91_mci.c | ||
| au1xmmc.c | ||
| au1xmmc.h | ||
| imxmmc.c | ||
| imxmmc.h | ||
| Kconfig | ||
| Makefile | ||
| mmc_block.c | ||
| mmc_queue.c | ||
| mmc_queue.h | ||
| mmc_sysfs.c | ||
| mmc.c | ||
| mmc.h | ||
| mmci.c | ||
| mmci.h | ||
| omap.c | ||
| pxamci.c | ||
| pxamci.h | ||
| sdhci.c | ||
| sdhci.h | ||
| tifm_sd.c | ||
| wbsd.c | ||
| wbsd.h | ||