linux/drivers/media/dvb/mantis/mantis_pcmcia.c
Alexey Dobriyan b7f080cfe2 net: remove mm.h inclusion from netdevice.h
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21 19:17:20 -07:00

122 lines
3.5 KiB
C

/*
Mantis PCI bridge driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_link.h" /* temporary due to physical layer stuff */
#include "mantis_reg.h"
/*
* If Slot state is already PLUG_IN event and we are called
* again, definitely it is jitter alone
*/
void mantis_event_cam_plugin(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_XTRACTED) {
dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0xda000000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
udelay(500);
ca->slot_state = MODULE_INSERTED;
}
udelay(100);
}
/*
* If Slot state is already UN_PLUG event and we are called
* again, definitely it is jitter alone
*/
void mantis_event_cam_unplug(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_INSERTED) {
dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0x00da0000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
gpif_irqcfg |= MANTIS_MASK_PLUGIN;
gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
udelay(500);
ca->slot_state = MODULE_XTRACTED;
}
udelay(100);
}
int mantis_pcmcia_init(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
u32 gpif_stat, card_stat;
mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
gpif_stat = mmread(MANTIS_GPIF_STATUS);
card_stat = mmread(MANTIS_GPIF_IRQCFG);
if (gpif_stat & MANTIS_GPIF_DETSTAT) {
dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_INSERTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
0,
DVB_CA_EN50221_CAMCHANGE_INSERTED);
} else {
dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_XTRACTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
0,
DVB_CA_EN50221_CAMCHANGE_REMOVED);
}
return 0;
}
void mantis_pcmcia_exit(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
}