linux/drivers/char/tty_ioctl.c
Alan Cox 5f519d7281 tty: expose new methods needed for drivers to get termios right
This adds three new functions (or in one case to be more exact makes it
always available)

tty_termios_copy_hw

Copies all the hardware settings from one termios structure to the other.
This is intended for drivers that support little or no hardware setting

tty_termios_encode_baud_rate

Allows you to set the input and output baud rate in a termios structure.  A
driver is supposed to set the resulting baud rate from a request so most
will want to use this function to set the resulting input and output rates
to match the hardware values.  Internally it knows about keeping Bxxx
encoding when possible to maximise compatibility.

tty_encode_baud_rate

As above but for the tty's own current termios structure

I suspect this will initially need some tweaking as it gets enabled by
driver patches over the next few mm cycles so consider this lot -mm only
for the moment so it can stabilize and end up neat before it goes to base.

I've tried not to break any obscure architectures - if you get a speed you
can't represent the code will print warnings on non updated termios systems
but not break.

Once this is merged and seems sane I've got a growing pile of driver
updates to use it - notably for USB serial drivers.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:58 -07:00

921 lines
24 KiB
C

/*
* linux/drivers/char/tty_ioctl.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
* which can be dynamically activated and de-activated by the line
* discipline handling modules (like SLIP).
*/
#include <linux/types.h>
#include <linux/termios.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/tty.h>
#include <linux/fcntl.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#undef TTY_DEBUG_WAIT_UNTIL_SENT
#undef DEBUG
/*
* Internal flag options for termios setting behavior
*/
#define TERMIOS_FLUSH 1
#define TERMIOS_WAIT 2
#define TERMIOS_TERMIO 4
#define TERMIOS_OLD 8
/**
* tty_wait_until_sent - wait for I/O to finish
* @tty: tty we are waiting for
* @timeout: how long we will wait
*
* Wait for characters pending in a tty driver to hit the wire, or
* for a timeout to occur (eg due to flow control)
*
* Locking: none
*/
void tty_wait_until_sent(struct tty_struct * tty, long timeout)
{
#ifdef TTY_DEBUG_WAIT_UNTIL_SENT
char buf[64];
printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
#endif
if (!tty->driver->chars_in_buffer)
return;
if (!timeout)
timeout = MAX_SCHEDULE_TIMEOUT;
if (wait_event_interruptible_timeout(tty->write_wait,
!tty->driver->chars_in_buffer(tty), timeout))
return;
if (tty->driver->wait_until_sent)
tty->driver->wait_until_sent(tty, timeout);
}
EXPORT_SYMBOL(tty_wait_until_sent);
static void unset_locked_termios(struct ktermios *termios,
struct ktermios *old,
struct ktermios *locked)
{
int i;
#define NOSET_MASK(x,y,z) (x = ((x) & ~(z)) | ((y) & (z)))
if (!locked) {
printk(KERN_WARNING "Warning?!? termios_locked is NULL.\n");
return;
}
NOSET_MASK(termios->c_iflag, old->c_iflag, locked->c_iflag);
NOSET_MASK(termios->c_oflag, old->c_oflag, locked->c_oflag);
NOSET_MASK(termios->c_cflag, old->c_cflag, locked->c_cflag);
NOSET_MASK(termios->c_lflag, old->c_lflag, locked->c_lflag);
termios->c_line = locked->c_line ? old->c_line : termios->c_line;
for (i=0; i < NCCS; i++)
termios->c_cc[i] = locked->c_cc[i] ?
old->c_cc[i] : termios->c_cc[i];
/* FIXME: What should we do for i/ospeed */
}
/*
* Routine which returns the baud rate of the tty
*
* Note that the baud_table needs to be kept in sync with the
* include/asm/termbits.h file.
*/
static const speed_t baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800,
#ifdef __sparc__
76800, 153600, 307200, 614400, 921600
#else
500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
2500000, 3000000, 3500000, 4000000
#endif
};
#ifndef __sparc__
static const tcflag_t baud_bits[] = {
B0, B50, B75, B110, B134, B150, B200, B300, B600,
B1200, B1800, B2400, B4800, B9600, B19200, B38400,
B57600, B115200, B230400, B460800, B500000, B576000,
B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
B3000000, B3500000, B4000000
};
#else
static const tcflag_t baud_bits[] = {
B0, B50, B75, B110, B134, B150, B200, B300, B600,
B1200, B1800, B2400, B4800, B9600, B19200, B38400,
B57600, B115200, B230400, B460800, B76800, B153600,
B307200, B614400, B921600
};
#endif
static int n_baud_table = ARRAY_SIZE(baud_table);
/**
* tty_termios_baud_rate
* @termios: termios structure
*
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data. Device drivers can call this
* function but should use ->c_[io]speed directly as they are updated.
*
* Locking: none
*/
speed_t tty_termios_baud_rate(struct ktermios *termios)
{
unsigned int cbaud;
cbaud = termios->c_cflag & CBAUD;
#ifdef BOTHER
/* Magic token for arbitary speed via c_ispeed/c_ospeed */
if (cbaud == BOTHER)
return termios->c_ospeed;
#endif
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
if (cbaud < 1 || cbaud + 15 > n_baud_table)
termios->c_cflag &= ~CBAUDEX;
else
cbaud += 15;
}
return baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
/**
* tty_termios_input_baud_rate
* @termios: termios structure
*
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data. Device drivers can call this
* function but should use ->c_[io]speed directly as they are updated.
*
* Locking: none
*/
speed_t tty_termios_input_baud_rate(struct ktermios *termios)
{
#ifdef IBSHIFT
unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
if (cbaud == B0)
return tty_termios_baud_rate(termios);
/* Magic token for arbitary speed via c_ispeed*/
if (cbaud == BOTHER)
return termios->c_ispeed;
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
if (cbaud < 1 || cbaud + 15 > n_baud_table)
termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
else
cbaud += 15;
}
return baud_table[cbaud];
#else
return tty_termios_baud_rate(termios);
#endif
}
EXPORT_SYMBOL(tty_termios_input_baud_rate);
/**
* tty_termios_encode_baud_rate
* @termios: ktermios structure holding user requested state
* @ispeed: input speed
* @ospeed: output speed
*
* Encode the speeds set into the passed termios structure. This is
* used as a library helper for drivers os that they can report back
* the actual speed selected when it differs from the speed requested
*
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
* we need to carefully set the bits when the user does not get the
* desired speed. We allow small margins and preserve as much of possible
* of the input intent to keep compatiblity.
*
* Locking: Caller should hold termios lock. This is already held
* when calling this function from the driver termios handler.
*
* The ifdefs deal with platforms whose owners have yet to update them
* and will all go away once this is done.
*/
void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud)
{
int i = 0;
int ifound = -1, ofound = -1;
int iclose = ibaud/50, oclose = obaud/50;
int ibinput = 0;
if (obaud == 0) /* CD dropped */
ibaud = 0; /* Clear ibaud to be sure */
termios->c_ispeed = ibaud;
termios->c_ospeed = obaud;
#ifdef BOTHER
/* If the user asked for a precise weird speed give a precise weird
answer. If they asked for a Bfoo speed they many have problems
digesting non-exact replies so fuzz a bit */
if ((termios->c_cflag & CBAUD) == BOTHER)
oclose = 0;
if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
iclose = 0;
if ((termios->c_cflag >> IBSHIFT) & CBAUD)
ibinput = 1; /* An input speed was specified */
#endif
termios->c_cflag &= ~CBAUD;
/*
* Our goal is to find a close match to the standard baud rate
* returned. Walk the baud rate table and if we get a very close
* match then report back the speed as a POSIX Bxxxx value by
* preference
*/
do {
if (obaud - oclose >= baud_table[i] && obaud + oclose <= baud_table[i]) {
termios->c_cflag |= baud_bits[i];
ofound = i;
}
if (ibaud - iclose >= baud_table[i] && ibaud + iclose <= baud_table[i]) {
if (ofound == i && !ibinput)
ifound = i;
#ifdef IBSHIFT
else {
ifound = i;
termios->c_cflag |= (baud_bits[i] << IBSHIFT);
}
#endif
}
} while (++i < n_baud_table);
/*
* If we found no match then use BOTHER if provided or warn
* the user their platform maintainer needs to wake up if not.
*/
#ifdef BOTHER
if (ofound == -1)
termios->c_cflag |= BOTHER;
/* Set exact input bits only if the input and output differ or the
user already did */
if (ifound == -1 && (ibaud != obaud || ibinput))
termios->c_cflag |= (BOTHER << IBSHIFT);
#else
if (ifound == -1 || ofound == -1) {
static int warned;
if (!warned++)
printk(KERN_WARNING "tty: Unable to return correct "
"speed data as your architecture needs updating.\n");
}
#endif
}
EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
}
EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
/**
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
*
* Locking: none
*/
speed_t tty_get_baud_rate(struct tty_struct *tty)
{
speed_t baud = tty_termios_baud_rate(tty->termios);
if (baud == 38400 && tty->alt_speed) {
if (!tty->warned) {
printk(KERN_WARNING "Use of setserial/setrocket to "
"set SPD_* flags is deprecated\n");
tty->warned = 1;
}
baud = tty->alt_speed;
}
return baud;
}
EXPORT_SYMBOL(tty_get_baud_rate);
/**
* tty_termios_copy_hw - copy hardware settings
* @new: New termios
* @old: Old termios
*
* Propogate the hardware specific terminal setting bits from
* the old termios structure to the new one. This is used in cases
* where the hardware does not support reconfiguration or as a helper
* in some cases where only minimal reconfiguration is supported
*/
void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old)
{
/* The bits a dumb device handles in software. Smart devices need
to always provide a set_termios method */
new->c_cflag &= HUPCL | CREAD | CLOCAL;
new->c_cflag |= old->c_cflag & ~(HUPCL | CREAD | CLOCAL);
new->c_ispeed = old->c_ispeed;
new->c_ospeed = old->c_ospeed;
}
EXPORT_SYMBOL(tty_termios_copy_hw);
/**
* change_termios - update termios values
* @tty: tty to update
* @new_termios: desired new value
*
* Perform updates to the termios values set on this terminal. There
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
* Locking: termios_sem
*/
static void change_termios(struct tty_struct * tty, struct ktermios * new_termios)
{
int canon_change;
struct ktermios old_termios = *tty->termios;
struct tty_ldisc *ld;
/*
* Perform the actual termios internal changes under lock.
*/
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
mutex_lock(&tty->termios_mutex);
*tty->termios = *new_termios;
unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
canon_change = (old_termios.c_lflag ^ tty->termios->c_lflag) & ICANON;
if (canon_change) {
memset(&tty->read_flags, 0, sizeof tty->read_flags);
tty->canon_head = tty->read_tail;
tty->canon_data = 0;
tty->erasing = 0;
}
/* This bit should be in the ldisc code */
if (canon_change && !L_ICANON(tty) && tty->read_cnt)
/* Get characters left over from canonical mode. */
wake_up_interruptible(&tty->read_wait);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
int new_flow = (I_IXON(tty) &&
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
if (old_flow != new_flow) {
tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
if (new_flow)
tty->ctrl_status |= TIOCPKT_DOSTOP;
else
tty->ctrl_status |= TIOCPKT_NOSTOP;
wake_up_interruptible(&tty->link->read_wait);
}
}
if (tty->driver->set_termios)
(*tty->driver->set_termios)(tty, &old_termios);
else
tty_termios_copy_hw(tty->termios, &old_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
if (ld->set_termios)
(ld->set_termios)(tty, &old_termios);
tty_ldisc_deref(ld);
}
mutex_unlock(&tty->termios_mutex);
}
/**
* set_termios - set termios values for a tty
* @tty: terminal device
* @arg: user data
* @opt: option information
*
* Helper function to prepare termios data and run neccessary other
* functions before using change_termios to do the actual changes.
*
* Locking:
* Called functions take ldisc and termios_sem locks
*/
static int set_termios(struct tty_struct * tty, void __user *arg, int opt)
{
struct ktermios tmp_termios;
struct tty_ldisc *ld;
int retval = tty_check_change(tty);
if (retval)
return retval;
memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
if (opt & TERMIOS_TERMIO) {
if (user_termio_to_kernel_termios(&tmp_termios,
(struct termio __user *)arg))
return -EFAULT;
#ifdef TCGETS2
} else if (opt & TERMIOS_OLD) {
if (user_termios_to_kernel_termios_1(&tmp_termios,
(struct termios __user *)arg))
return -EFAULT;
} else {
if (user_termios_to_kernel_termios(&tmp_termios,
(struct termios2 __user *)arg))
return -EFAULT;
}
#else
} else if (user_termios_to_kernel_termios(&tmp_termios,
(struct termios __user *)arg))
return -EFAULT;
#endif
/* If old style Bfoo values are used then load c_ispeed/c_ospeed with the real speed
so its unconditionally usable */
tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios);
tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
if ((opt & TERMIOS_FLUSH) && ld->flush_buffer)
ld->flush_buffer(tty);
tty_ldisc_deref(ld);
}
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
}
change_termios(tty, &tmp_termios);
/* FIXME: Arguably if tmp_termios == tty->termios AND the
actual requested termios was not tmp_termios then we may
want to return an error as no user requested change has
succeeded */
return 0;
}
static int get_termio(struct tty_struct * tty, struct termio __user * termio)
{
if (kernel_termios_to_user_termio(termio, tty->termios))
return -EFAULT;
return 0;
}
static unsigned long inq_canon(struct tty_struct * tty)
{
int nr, head, tail;
if (!tty->canon_data || !tty->read_buf)
return 0;
head = tty->canon_head;
tail = tty->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
if (test_bit(tail, tty->read_flags) &&
tty->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
return nr;
}
#ifdef TIOCGETP
/*
* These are deprecated, but there is limited support..
*
* The "sg_flags" translation is a joke..
*/
static int get_sgflags(struct tty_struct * tty)
{
int flags = 0;
if (!(tty->termios->c_lflag & ICANON)) {
if (tty->termios->c_lflag & ISIG)
flags |= 0x02; /* cbreak */
else
flags |= 0x20; /* raw */
}
if (tty->termios->c_lflag & ECHO)
flags |= 0x08; /* echo */
if (tty->termios->c_oflag & OPOST)
if (tty->termios->c_oflag & ONLCR)
flags |= 0x10; /* crmod */
return flags;
}
static int get_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb)
{
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
tmp.sg_ispeed = tty->termios->c_ispeed;
tmp.sg_ospeed = tty->termios->c_ospeed;
tmp.sg_erase = tty->termios->c_cc[VERASE];
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
mutex_unlock(&tty->termios_mutex);
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static void set_sgflags(struct ktermios * termios, int flags)
{
termios->c_iflag = ICRNL | IXON;
termios->c_oflag = 0;
termios->c_lflag = ISIG | ICANON;
if (flags & 0x02) { /* cbreak */
termios->c_iflag = 0;
termios->c_lflag &= ~ICANON;
}
if (flags & 0x08) { /* echo */
termios->c_lflag |= ECHO | ECHOE | ECHOK |
ECHOCTL | ECHOKE | IEXTEN;
}
if (flags & 0x10) { /* crmod */
termios->c_oflag |= OPOST | ONLCR;
}
if (flags & 0x20) { /* raw */
termios->c_iflag = 0;
termios->c_lflag &= ~(ISIG | ICANON);
}
if (!(termios->c_lflag & ICANON)) {
termios->c_cc[VMIN] = 1;
termios->c_cc[VTIME] = 0;
}
}
/**
* set_sgttyb - set legacy terminal values
* @tty: tty structure
* @sgttyb: pointer to old style terminal structure
*
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
* Locking: termios_sem
*/
static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb)
{
int retval;
struct sgttyb tmp;
struct ktermios termios;
retval = tty_check_change(tty);
if (retval)
return retval;
if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
termios = *tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
set_sgflags(&termios, tmp.sg_flags);
/* Try and encode into Bfoo format */
#ifdef BOTHER
tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed);
#endif
mutex_unlock(&tty->termios_mutex);
change_termios(tty, &termios);
return 0;
}
#endif
#ifdef TIOCGETC
static int get_tchars(struct tty_struct * tty, struct tchars __user * tchars)
{
struct tchars tmp;
tmp.t_intrc = tty->termios->c_cc[VINTR];
tmp.t_quitc = tty->termios->c_cc[VQUIT];
tmp.t_startc = tty->termios->c_cc[VSTART];
tmp.t_stopc = tty->termios->c_cc[VSTOP];
tmp.t_eofc = tty->termios->c_cc[VEOF];
tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static int set_tchars(struct tty_struct * tty, struct tchars __user * tchars)
{
struct tchars tmp;
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
tty->termios->c_cc[VINTR] = tmp.t_intrc;
tty->termios->c_cc[VQUIT] = tmp.t_quitc;
tty->termios->c_cc[VSTART] = tmp.t_startc;
tty->termios->c_cc[VSTOP] = tmp.t_stopc;
tty->termios->c_cc[VEOF] = tmp.t_eofc;
tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
return 0;
}
#endif
#ifdef TIOCGLTC
static int get_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars)
{
struct ltchars tmp;
tmp.t_suspc = tty->termios->c_cc[VSUSP];
tmp.t_dsuspc = tty->termios->c_cc[VSUSP]; /* what is dsuspc anyway? */
tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
tmp.t_flushc = tty->termios->c_cc[VEOL2]; /* what is flushc anyway? */
tmp.t_werasc = tty->termios->c_cc[VWERASE];
tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars)
{
struct ltchars tmp;
if (copy_from_user(&tmp, ltchars, sizeof(tmp)))
return -EFAULT;
tty->termios->c_cc[VSUSP] = tmp.t_suspc;
tty->termios->c_cc[VEOL2] = tmp.t_dsuspc; /* what is dsuspc anyway? */
tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
tty->termios->c_cc[VEOL2] = tmp.t_flushc; /* what is flushc anyway? */
tty->termios->c_cc[VWERASE] = tmp.t_werasc;
tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
return 0;
}
#endif
/**
* send_prio_char - send priority character
*
* Send a high priority character to the tty even if stopped
*
* Locking: none for xchar method, write ordering for write method.
*/
static int send_prio_char(struct tty_struct *tty, char ch)
{
int was_stopped = tty->stopped;
if (tty->driver->send_xchar) {
tty->driver->send_xchar(tty, ch);
return 0;
}
if (tty_write_lock(tty, 0) < 0)
return -ERESTARTSYS;
if (was_stopped)
start_tty(tty);
tty->driver->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
tty_write_unlock(tty);
return 0;
}
int n_tty_ioctl(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct * real_tty;
void __user *p = (void __user *)arg;
int retval;
struct tty_ldisc *ld;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
real_tty = tty->link;
else
real_tty = tty;
switch (cmd) {
#ifdef TIOCGETP
case TIOCGETP:
return get_sgttyb(real_tty, (struct sgttyb __user *) arg);
case TIOCSETP:
case TIOCSETN:
return set_sgttyb(real_tty, (struct sgttyb __user *) arg);
#endif
#ifdef TIOCGETC
case TIOCGETC:
return get_tchars(real_tty, p);
case TIOCSETC:
return set_tchars(real_tty, p);
#endif
#ifdef TIOCGLTC
case TIOCGLTC:
return get_ltchars(real_tty, p);
case TIOCSLTC:
return set_ltchars(real_tty, p);
#endif
case TCSETSF:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD);
case TCSETSW:
return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD);
case TCSETS:
return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
case TCGETS:
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
return -EFAULT;
return 0;
#else
case TCGETS:
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
return -EFAULT;
return 0;
case TCGETS2:
if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
return -EFAULT;
return 0;
case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
case TCSETSW2:
return set_termios(real_tty, p, TERMIOS_WAIT);
case TCSETS2:
return set_termios(real_tty, p, 0);
#endif
case TCGETA:
return get_termio(real_tty, p);
case TCSETAF:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO);
case TCSETAW:
return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
case TCSETA:
return set_termios(real_tty, p, TERMIOS_TERMIO);
case TCXONC:
retval = tty_check_change(tty);
if (retval)
return retval;
switch (arg) {
case TCOOFF:
if (!tty->flow_stopped) {
tty->flow_stopped = 1;
stop_tty(tty);
}
break;
case TCOON:
if (tty->flow_stopped) {
tty->flow_stopped = 0;
start_tty(tty);
}
break;
case TCIOFF:
if (STOP_CHAR(tty) != __DISABLED_CHAR)
return send_prio_char(tty, STOP_CHAR(tty));
break;
case TCION:
if (START_CHAR(tty) != __DISABLED_CHAR)
return send_prio_char(tty, START_CHAR(tty));
break;
default:
return -EINVAL;
}
return 0;
case TCFLSH:
retval = tty_check_change(tty);
if (retval)
return retval;
ld = tty_ldisc_ref(tty);
switch (arg) {
case TCIFLUSH:
if (ld && ld->flush_buffer)
ld->flush_buffer(tty);
break;
case TCIOFLUSH:
if (ld && ld->flush_buffer)
ld->flush_buffer(tty);
/* fall through */
case TCOFLUSH:
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
break;
default:
tty_ldisc_deref(ld);
return -EINVAL;
}
tty_ldisc_deref(ld);
return 0;
case TIOCOUTQ:
return put_user(tty->driver->chars_in_buffer ?
tty->driver->chars_in_buffer(tty) : 0,
(int __user *) arg);
case TIOCINQ:
retval = tty->read_cnt;
if (L_ICANON(tty))
retval = inq_canon(tty);
return put_user(retval, (unsigned int __user *) arg);
#ifndef TCGETS2
case TIOCGLCKTRMIOS:
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
return -EFAULT;
return 0;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
return -EFAULT;
return 0;
#else
case TIOCGLCKTRMIOS:
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
return -EFAULT;
return 0;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
return -EFAULT;
return 0;
#endif
case TIOCPKT:
{
int pktmode;
if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
tty->driver->subtype != PTY_TYPE_MASTER)
return -ENOTTY;
if (get_user(pktmode, (int __user *) arg))
return -EFAULT;
if (pktmode) {
if (!tty->packet) {
tty->packet = 1;
tty->link->ctrl_status = 0;
}
} else
tty->packet = 0;
return 0;
}
case TIOCGSOFTCAR:
return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
mutex_unlock(&tty->termios_mutex);
return 0;
default:
return -ENOIOCTLCMD;
}
}
EXPORT_SYMBOL(n_tty_ioctl);