linux/sound/firewire/Kconfig
Takashi Sakamoto 03abd33a11 ALSA: oxfw: add support for Mackie Onyx 1640i
As of kernel 4.10,  ALSA OXFW driver has no entry for Onyx 1640i produced
by Mackie (Loud Technologies). This commit supplement it.

I note that there're two models produced by Mackie (Loud Technologies),
which have the same name 'Onyx 1640i'. The former model based on OXFW970,
the latter model based on Dice. This is probably due to low quality of
communication of OXFW series.

Additionally, the tester reports his or her experiences to get unexpected
result at higher sampling transmission frequency as 88.2/96.0 kHz. We
didn't have further investigation yet[0].

$ ./linux-firewire-utils/src/crpp < config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  042525ce  bus_info_length 4, crc_length 37, crc 9678
404  31333934  bus_name "1394"
408  20ff5003  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 5 (64)
40c  000ff205  company_id 000ff2     |
410  00000fcf  device_id 0500000fcf  | EUI-64 000ff20500000fcf

               root directory
               -----------------------------------------------------------------
414  0006c1b7  directory_length 6, crc 49591
418  03000ff2  vendor
41c  8100000a  --> descriptor leaf at 444
420  17001640  model
424  81000011  --> descriptor leaf at 468
428  0c0083c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  00040b97  directory_length 4, crc 2967
434  1200a02d  specifier id: 1394 TA
438  13010001  version: AV/C
43c  17001640  model
440  81000010  --> descriptor leaf at 480

               descriptor leaf at 444
               -----------------------------------------------------------------
444  0008a886  leaf_length 8, crc 43142
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  4c6f7564  "Loud"
454  20546563  " Tec"
458  686e6f6c  "hnol"
45c  6f676965  "ogie"
460  7320496e  "s In"
464  632e0000  "c."

               descriptor leaf at 468
               -----------------------------------------------------------------
468  00059fcf  leaf_length 5, crc 40911
46c  00000000  textual descriptor
470  00000000  minimal ASCII
474  4f6e7978  "Onyx"
478  20313634  " 164"
47c  30690000  "0i"

               descriptor leaf at 480
               -----------------------------------------------------------------
480  00059fcf  leaf_length 5, crc 40911
484  00000000  textual descriptor
488  00000000  minimal ASCII
48c  4f6e7978  "Onyx"
490  20313634  " 164"
494  30690000  "0i"

[0]: [FFADO-user] Mackie 1640i issues (finer details)
https://sourceforge.net/p/ffado/mailman/message/35229260/

Tested-by: Seth O'Bannion <saobannion@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:34:38 +01:00

144 lines
4.2 KiB
Plaintext

menuconfig SND_FIREWIRE
bool "FireWire sound devices"
depends on FIREWIRE
default y
help
Support for IEEE-1394/FireWire/iLink sound devices.
if SND_FIREWIRE && FIREWIRE
config SND_FIREWIRE_LIB
tristate
select SND_PCM
select SND_RAWMIDI
config SND_DICE
tristate "DICE-based DACs support"
select SND_HWDEP
select SND_FIREWIRE_LIB
help
Say Y here to include support for many DACs based on the DICE
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
To compile this driver as a module, choose M here: the module
will be called snd-dice.
config SND_OXFW
tristate "Oxford Semiconductor FW970/971 chipset support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based on
Oxford Semiconductor FW970/971 chipset.
* Griffin Firewave
* LaCie Firewire Speakers
* Behringer F-Control Audio 202
* Mackie(Loud) Onyx-i series (former models)
* Mackie(Loud) Onyx 1640i (former model)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
* Mackie(Loud) d.2 pro/d.4 pro
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
* Stanton Controllers & Systems 1 Deck/Mixer
To compile this driver as a module, choose M here: the module
will be called snd-oxfw.
config SND_ISIGHT
tristate "Apple iSight microphone"
select SND_FIREWIRE_LIB
help
Say Y here to include support for the front and rear microphones
of the Apple iSight web camera.
To compile this driver as a module, choose M here: the module
will be called snd-isight.
config SND_FIREWORKS
tristate "Echo Fireworks board module support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on Echo Digital Audio Fireworks board:
* Mackie Onyx 400F/1200F
* Echo AudioFire12/8(until 2009 July)
* Echo AudioFire2/4/Pre8/8(since 2009 July)
* Echo Fireworks 8/HDMI
* Gibson Robot Interface Pack/GoldTop
To compile this driver as a module, choose M here: the module
will be called snd-fireworks.
config SND_BEBOB
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
* Edirol FA-66/FA-101
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
* Mackie d.2 (FireWire Option)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
* Behringer Digital Mixer X32 series (X-UF Card)
* Behringer FCA610/1616
* Apogee Rosetta 200/400 (X-FireWire card)
* Apogee DA/AD/DD-16X (X-FireWire card)
* Apogee Ensemble
* ESI QuataFire 610
* AcousticReality eARMasterOne
* CME MatrixKFW
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
* Lynx Aurora 8/16 (LT-FW)
* ICON FireXon
* PrismSound Orpheus/ADA-8XR
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
* TerraTec EWS MIC2/EWS MIC8
* TerraTec Aureon 7.1 FireWire
* Yamaha GO44/GO46
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
* M-Audio FireWire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
config SND_FIREWIRE_DIGI00X
tristate "Digidesign Digi 002/003 family support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for Digidesign Digi 002/003 family.
* Digi 002 Console
* Digi 002 Rack
* Digi 003 Console
* Digi 003 Rack
* Digi 003 Rack+
To compile this driver as a module, choose M here: the module
will be called snd-firewire-digi00x.
config SND_FIREWIRE_TASCAM
tristate "TASCAM FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for TASCAM.
* FW-1884
* FW-1082
* FW-1804
To compile this driver as a module, choose M here: the module
will be called snd-firewire-tascam.
endif # SND_FIREWIRE