linux/drivers/mfd/rn5t618.c
Andreas Kemnade 0c81604516 mfd: rn5t618: Add IRQ support
This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-27 09:42:12 +00:00

254 lines
6.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* MFD core driver for Ricoh RN5T618 PMIC
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
* Copyright (C) 2016 Toradex AG
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
static const struct mfd_cell rn5t618_cells[] = {
{ .name = "rn5t618-regulator" },
{ .name = "rn5t618-wdt" },
};
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RN5T618_WATCHDOGCNT:
case RN5T618_DCIRQ:
case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
case RN5T618_ADCCNT3:
case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
case RN5T618_IR_GPR:
case RN5T618_IR_GPF:
case RN5T618_MON_IOIN:
case RN5T618_INTMON:
return true;
default:
return false;
}
}
static const struct regmap_config rn5t618_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.volatile_reg = rn5t618_volatile_reg,
.max_register = RN5T618_MAX_REG,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_irq rc5t619_irqs[] = {
REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
};
static const struct regmap_irq_chip rc5t619_irq_chip = {
.name = "rc5t619",
.irqs = rc5t619_irqs,
.num_irqs = ARRAY_SIZE(rc5t619_irqs),
.num_regs = 1,
.status_base = RN5T618_INTMON,
.mask_base = RN5T618_INTEN,
.mask_invert = true,
};
static struct rn5t618 *rn5t618_pm_power_off;
static struct notifier_block rn5t618_restart_handler;
static int rn5t618_irq_init(struct rn5t618 *rn5t618)
{
const struct regmap_irq_chip *irq_chip = NULL;
int ret;
if (!rn5t618->irq)
return 0;
switch (rn5t618->variant) {
case RC5T619:
irq_chip = &rc5t619_irq_chip;
break;
default:
dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
(int)rn5t618->variant);
return -ENOENT;
}
ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
rn5t618->irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
0, irq_chip, &rn5t618->irq_data);
if (ret)
dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
return ret;
}
static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
RN5T618_REPCNT_REPWRON,
repower ? RN5T618_REPCNT_REPWRON : 0);
/* start power-off sequence */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
}
static void rn5t618_power_off(void)
{
rn5t618_trigger_poweroff_sequence(false);
}
static int rn5t618_restart(struct notifier_block *this,
unsigned long mode, void *cmd)
{
rn5t618_trigger_poweroff_sequence(true);
/*
* Re-power factor detection on PMIC side is not instant. 1ms
* proved to be enough time until reset takes effect.
*/
mdelay(1);
return NOTIFY_DONE;
}
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
{ .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
static int rn5t618_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
const struct of_device_id *of_id;
struct rn5t618 *priv;
int ret;
of_id = of_match_device(rn5t618_of_match, &i2c->dev);
if (!of_id) {
dev_err(&i2c->dev, "Failed to find matching DT ID\n");
return -EINVAL;
}
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
priv->irq = i2c->irq;
priv->dev = &i2c->dev;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) {
ret = PTR_ERR(priv->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
return ret;
}
rn5t618_pm_power_off = priv;
if (of_device_is_system_power_controller(i2c->dev.of_node)) {
if (!pm_power_off)
pm_power_off = rn5t618_power_off;
else
dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
}
rn5t618_restart_handler.notifier_call = rn5t618_restart;
rn5t618_restart_handler.priority = 192;
ret = register_restart_handler(&rn5t618_restart_handler);
if (ret) {
dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
return ret;
}
return rn5t618_irq_init(priv);
}
static int rn5t618_i2c_remove(struct i2c_client *i2c)
{
struct rn5t618 *priv = i2c_get_clientdata(i2c);
if (priv == rn5t618_pm_power_off) {
rn5t618_pm_power_off = NULL;
pm_power_off = NULL;
}
unregister_restart_handler(&rn5t618_restart_handler);
return 0;
}
static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
{
struct rn5t618 *priv = dev_get_drvdata(dev);
if (priv->irq)
disable_irq(priv->irq);
return 0;
}
static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
{
struct rn5t618 *priv = dev_get_drvdata(dev);
if (priv->irq)
enable_irq(priv->irq);
return 0;
}
static const struct i2c_device_id rn5t618_i2c_id[] = {
{ }
};
MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
rn5t618_i2c_suspend,
rn5t618_i2c_resume);
static struct i2c_driver rn5t618_i2c_driver = {
.driver = {
.name = "rn5t618",
.of_match_table = of_match_ptr(rn5t618_of_match),
.pm = &rn5t618_i2c_dev_pm_ops,
},
.probe = rn5t618_i2c_probe,
.remove = rn5t618_i2c_remove,
.id_table = rn5t618_i2c_id,
};
module_i2c_driver(rn5t618_i2c_driver);
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
MODULE_LICENSE("GPL v2");