linux/drivers/dma/dw/idma32.c
Andy Shevchenko 934891b0a1 dmaengine: dw: Don't pollute CTL_LO on iDMA 32-bit
Intel iDMA 32-bit doesn't have a concept of bus masters and thus
there is no need to setup any kind of masters in the CTL_LO register.

Moreover, the burst size for memory-to-memory transfer is not what is says,
we need to have a corrected list of possible sizes. Note, that
the size of 8 items, each of that up to 4 bytes, is chosen because of
maximum of 1/2 FIFO, which is 64 bytes on Intel Merrifield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07 17:57:13 +05:30

161 lines
3.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2013,2018 Intel Corporation
#include <linux/bitops.h>
#include <linux/dmaengine.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/types.h>
#include "internal.h"
static void idma32_initialize_chan(struct dw_dma_chan *dwc)
{
u32 cfghi = 0;
u32 cfglo = 0;
/* Set default burst alignment */
cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
/* Low 4 bits of the request lines */
cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
/* Request line extension (2 bits) */
cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
}
static void idma32_suspend_chan(struct dw_dma_chan *dwc, bool drain)
{
u32 cfglo = channel_readl(dwc, CFG_LO);
if (drain)
cfglo |= IDMA32C_CFGL_CH_DRAIN;
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
}
static void idma32_resume_chan(struct dw_dma_chan *dwc, bool drain)
{
u32 cfglo = channel_readl(dwc, CFG_LO);
if (drain)
cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP);
}
static u32 idma32_bytes2block(struct dw_dma_chan *dwc,
size_t bytes, unsigned int width, size_t *len)
{
u32 block;
if (bytes > dwc->block_size) {
block = dwc->block_size;
*len = dwc->block_size;
} else {
block = bytes;
*len = bytes;
}
return block;
}
static size_t idma32_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
{
return IDMA32C_CTLH_BLOCK_TS(block);
}
static u32 idma32_prepare_ctllo(struct dw_dma_chan *dwc)
{
struct dma_slave_config *sconfig = &dwc->dma_sconfig;
bool is_slave = is_slave_direction(dwc->direction);
u8 smsize = is_slave ? sconfig->src_maxburst : IDMA32_MSIZE_8;
u8 dmsize = is_slave ? sconfig->dst_maxburst : IDMA32_MSIZE_8;
return DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN |
DWC_CTLL_DST_MSIZE(dmsize) | DWC_CTLL_SRC_MSIZE(smsize);
}
static void idma32_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst)
{
*maxburst = *maxburst > 1 ? fls(*maxburst) - 1 : 0;
}
static void idma32_set_device_name(struct dw_dma *dw, int id)
{
snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", id);
}
/*
* Program FIFO size of channels.
*
* By default full FIFO (512 bytes) is assigned to channel 0. Here we
* slice FIFO on equal parts between channels.
*/
static void idma32_fifo_partition(struct dw_dma *dw)
{
u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) |
IDMA32C_FP_UPDATE;
u64 fifo_partition = 0;
/* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
fifo_partition |= value << 0;
/* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
fifo_partition |= value << 32;
/* Program FIFO Partition registers - 64 bytes per channel */
idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
}
static void idma32_disable(struct dw_dma *dw)
{
do_dw_dma_off(dw);
idma32_fifo_partition(dw);
}
static void idma32_enable(struct dw_dma *dw)
{
idma32_fifo_partition(dw);
do_dw_dma_on(dw);
}
int idma32_dma_probe(struct dw_dma_chip *chip)
{
struct dw_dma *dw;
dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
if (!dw)
return -ENOMEM;
/* Channel operations */
dw->initialize_chan = idma32_initialize_chan;
dw->suspend_chan = idma32_suspend_chan;
dw->resume_chan = idma32_resume_chan;
dw->prepare_ctllo = idma32_prepare_ctllo;
dw->encode_maxburst = idma32_encode_maxburst;
dw->bytes2block = idma32_bytes2block;
dw->block2bytes = idma32_block2bytes;
/* Device operations */
dw->set_device_name = idma32_set_device_name;
dw->disable = idma32_disable;
dw->enable = idma32_enable;
chip->dw = dw;
return do_dma_probe(chip);
}
EXPORT_SYMBOL_GPL(idma32_dma_probe);
int idma32_dma_remove(struct dw_dma_chip *chip)
{
return do_dma_remove(chip);
}
EXPORT_SYMBOL_GPL(idma32_dma_remove);