mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
8639b46139
setpriority(PRIO_USER, 0, x) will change the priority of tasks outside of the current pid namespace. This is in contrast to both the other modes of setpriority and the example of kill(-1). Fix this. getpriority and ioprio have the same failure mode, fix them too. Eric said: : After some more thinking about it this patch sounds justifiable. : : My goal with namespaces is not to build perfect isolation mechanisms : as that can get into ill defined territory, but to build well defined : mechanisms. And to handle the corner cases so you can use only : a single namespace with well defined results. : : In this case you have found the two interfaces I am aware of that : identify processes by uid instead of by pid. Which quite frankly is : weird. Unfortunately the weird unexpected cases are hard to handle : in the usual way. : : I was hoping for a little more information. Changes like this one we : have to be careful of because someone might be depending on the current : behavior. I don't think they are and I do think this make sense as part : of the pid namespace. Signed-off-by: Ben Segall <bsegall@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ambrose Feinstein <ambrose@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2432 lines
58 KiB
C
2432 lines
58 KiB
C
/*
|
|
* linux/kernel/sys.c
|
|
*
|
|
* Copyright (C) 1991, 1992 Linus Torvalds
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/utsname.h>
|
|
#include <linux/mman.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/prctl.h>
|
|
#include <linux/highuid.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/perf_event.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/device.h>
|
|
#include <linux/key.h>
|
|
#include <linux/times.h>
|
|
#include <linux/posix-timers.h>
|
|
#include <linux/security.h>
|
|
#include <linux/dcookies.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/cn_proc.h>
|
|
#include <linux/getcpu.h>
|
|
#include <linux/task_io_accounting_ops.h>
|
|
#include <linux/seccomp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/personality.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/fs_struct.h>
|
|
#include <linux/file.h>
|
|
#include <linux/mount.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/version.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#include <linux/compat.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/kprobes.h>
|
|
#include <linux/user_namespace.h>
|
|
#include <linux/binfmts.h>
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/rcupdate.h>
|
|
#include <linux/uidgid.h>
|
|
#include <linux/cred.h>
|
|
|
|
#include <linux/kmsg_dump.h>
|
|
/* Move somewhere else to avoid recompiling? */
|
|
#include <generated/utsrelease.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/unistd.h>
|
|
|
|
#ifndef SET_UNALIGN_CTL
|
|
# define SET_UNALIGN_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef GET_UNALIGN_CTL
|
|
# define GET_UNALIGN_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef SET_FPEMU_CTL
|
|
# define SET_FPEMU_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef GET_FPEMU_CTL
|
|
# define GET_FPEMU_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef SET_FPEXC_CTL
|
|
# define SET_FPEXC_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef GET_FPEXC_CTL
|
|
# define GET_FPEXC_CTL(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef GET_ENDIAN
|
|
# define GET_ENDIAN(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef SET_ENDIAN
|
|
# define SET_ENDIAN(a, b) (-EINVAL)
|
|
#endif
|
|
#ifndef GET_TSC_CTL
|
|
# define GET_TSC_CTL(a) (-EINVAL)
|
|
#endif
|
|
#ifndef SET_TSC_CTL
|
|
# define SET_TSC_CTL(a) (-EINVAL)
|
|
#endif
|
|
#ifndef MPX_ENABLE_MANAGEMENT
|
|
# define MPX_ENABLE_MANAGEMENT() (-EINVAL)
|
|
#endif
|
|
#ifndef MPX_DISABLE_MANAGEMENT
|
|
# define MPX_DISABLE_MANAGEMENT() (-EINVAL)
|
|
#endif
|
|
#ifndef GET_FP_MODE
|
|
# define GET_FP_MODE(a) (-EINVAL)
|
|
#endif
|
|
#ifndef SET_FP_MODE
|
|
# define SET_FP_MODE(a,b) (-EINVAL)
|
|
#endif
|
|
|
|
/*
|
|
* this is where the system-wide overflow UID and GID are defined, for
|
|
* architectures that now have 32-bit UID/GID but didn't in the past
|
|
*/
|
|
|
|
int overflowuid = DEFAULT_OVERFLOWUID;
|
|
int overflowgid = DEFAULT_OVERFLOWGID;
|
|
|
|
EXPORT_SYMBOL(overflowuid);
|
|
EXPORT_SYMBOL(overflowgid);
|
|
|
|
/*
|
|
* the same as above, but for filesystems which can only store a 16-bit
|
|
* UID and GID. as such, this is needed on all architectures
|
|
*/
|
|
|
|
int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
|
|
int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
|
|
|
|
EXPORT_SYMBOL(fs_overflowuid);
|
|
EXPORT_SYMBOL(fs_overflowgid);
|
|
|
|
/*
|
|
* Returns true if current's euid is same as p's uid or euid,
|
|
* or has CAP_SYS_NICE to p's user_ns.
|
|
*
|
|
* Called with rcu_read_lock, creds are safe
|
|
*/
|
|
static bool set_one_prio_perm(struct task_struct *p)
|
|
{
|
|
const struct cred *cred = current_cred(), *pcred = __task_cred(p);
|
|
|
|
if (uid_eq(pcred->uid, cred->euid) ||
|
|
uid_eq(pcred->euid, cred->euid))
|
|
return true;
|
|
if (ns_capable(pcred->user_ns, CAP_SYS_NICE))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* set the priority of a task
|
|
* - the caller must hold the RCU read lock
|
|
*/
|
|
static int set_one_prio(struct task_struct *p, int niceval, int error)
|
|
{
|
|
int no_nice;
|
|
|
|
if (!set_one_prio_perm(p)) {
|
|
error = -EPERM;
|
|
goto out;
|
|
}
|
|
if (niceval < task_nice(p) && !can_nice(p, niceval)) {
|
|
error = -EACCES;
|
|
goto out;
|
|
}
|
|
no_nice = security_task_setnice(p, niceval);
|
|
if (no_nice) {
|
|
error = no_nice;
|
|
goto out;
|
|
}
|
|
if (error == -ESRCH)
|
|
error = 0;
|
|
set_user_nice(p, niceval);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
|
|
{
|
|
struct task_struct *g, *p;
|
|
struct user_struct *user;
|
|
const struct cred *cred = current_cred();
|
|
int error = -EINVAL;
|
|
struct pid *pgrp;
|
|
kuid_t uid;
|
|
|
|
if (which > PRIO_USER || which < PRIO_PROCESS)
|
|
goto out;
|
|
|
|
/* normalize: avoid signed division (rounding problems) */
|
|
error = -ESRCH;
|
|
if (niceval < MIN_NICE)
|
|
niceval = MIN_NICE;
|
|
if (niceval > MAX_NICE)
|
|
niceval = MAX_NICE;
|
|
|
|
rcu_read_lock();
|
|
read_lock(&tasklist_lock);
|
|
switch (which) {
|
|
case PRIO_PROCESS:
|
|
if (who)
|
|
p = find_task_by_vpid(who);
|
|
else
|
|
p = current;
|
|
if (p)
|
|
error = set_one_prio(p, niceval, error);
|
|
break;
|
|
case PRIO_PGRP:
|
|
if (who)
|
|
pgrp = find_vpid(who);
|
|
else
|
|
pgrp = task_pgrp(current);
|
|
do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
|
|
error = set_one_prio(p, niceval, error);
|
|
} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
|
|
break;
|
|
case PRIO_USER:
|
|
uid = make_kuid(cred->user_ns, who);
|
|
user = cred->user;
|
|
if (!who)
|
|
uid = cred->uid;
|
|
else if (!uid_eq(uid, cred->uid)) {
|
|
user = find_user(uid);
|
|
if (!user)
|
|
goto out_unlock; /* No processes for this user */
|
|
}
|
|
do_each_thread(g, p) {
|
|
if (uid_eq(task_uid(p), uid) && task_pid_vnr(p))
|
|
error = set_one_prio(p, niceval, error);
|
|
} while_each_thread(g, p);
|
|
if (!uid_eq(uid, cred->uid))
|
|
free_uid(user); /* For find_user() */
|
|
break;
|
|
}
|
|
out_unlock:
|
|
read_unlock(&tasklist_lock);
|
|
rcu_read_unlock();
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Ugh. To avoid negative return values, "getpriority()" will
|
|
* not return the normal nice-value, but a negated value that
|
|
* has been offset by 20 (ie it returns 40..1 instead of -20..19)
|
|
* to stay compatible.
|
|
*/
|
|
SYSCALL_DEFINE2(getpriority, int, which, int, who)
|
|
{
|
|
struct task_struct *g, *p;
|
|
struct user_struct *user;
|
|
const struct cred *cred = current_cred();
|
|
long niceval, retval = -ESRCH;
|
|
struct pid *pgrp;
|
|
kuid_t uid;
|
|
|
|
if (which > PRIO_USER || which < PRIO_PROCESS)
|
|
return -EINVAL;
|
|
|
|
rcu_read_lock();
|
|
read_lock(&tasklist_lock);
|
|
switch (which) {
|
|
case PRIO_PROCESS:
|
|
if (who)
|
|
p = find_task_by_vpid(who);
|
|
else
|
|
p = current;
|
|
if (p) {
|
|
niceval = nice_to_rlimit(task_nice(p));
|
|
if (niceval > retval)
|
|
retval = niceval;
|
|
}
|
|
break;
|
|
case PRIO_PGRP:
|
|
if (who)
|
|
pgrp = find_vpid(who);
|
|
else
|
|
pgrp = task_pgrp(current);
|
|
do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
|
|
niceval = nice_to_rlimit(task_nice(p));
|
|
if (niceval > retval)
|
|
retval = niceval;
|
|
} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
|
|
break;
|
|
case PRIO_USER:
|
|
uid = make_kuid(cred->user_ns, who);
|
|
user = cred->user;
|
|
if (!who)
|
|
uid = cred->uid;
|
|
else if (!uid_eq(uid, cred->uid)) {
|
|
user = find_user(uid);
|
|
if (!user)
|
|
goto out_unlock; /* No processes for this user */
|
|
}
|
|
do_each_thread(g, p) {
|
|
if (uid_eq(task_uid(p), uid) && task_pid_vnr(p)) {
|
|
niceval = nice_to_rlimit(task_nice(p));
|
|
if (niceval > retval)
|
|
retval = niceval;
|
|
}
|
|
} while_each_thread(g, p);
|
|
if (!uid_eq(uid, cred->uid))
|
|
free_uid(user); /* for find_user() */
|
|
break;
|
|
}
|
|
out_unlock:
|
|
read_unlock(&tasklist_lock);
|
|
rcu_read_unlock();
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Unprivileged users may change the real gid to the effective gid
|
|
* or vice versa. (BSD-style)
|
|
*
|
|
* If you set the real gid at all, or set the effective gid to a value not
|
|
* equal to the real gid, then the saved gid is set to the new effective gid.
|
|
*
|
|
* This makes it possible for a setgid program to completely drop its
|
|
* privileges, which is often a useful assertion to make when you are doing
|
|
* a security audit over a program.
|
|
*
|
|
* The general idea is that a program which uses just setregid() will be
|
|
* 100% compatible with BSD. A program which uses just setgid() will be
|
|
* 100% compatible with POSIX with saved IDs.
|
|
*
|
|
* SMP: There are not races, the GIDs are checked only by filesystem
|
|
* operations (as far as semantic preservation is concerned).
|
|
*/
|
|
#ifdef CONFIG_MULTIUSER
|
|
SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kgid_t krgid, kegid;
|
|
|
|
krgid = make_kgid(ns, rgid);
|
|
kegid = make_kgid(ns, egid);
|
|
|
|
if ((rgid != (gid_t) -1) && !gid_valid(krgid))
|
|
return -EINVAL;
|
|
if ((egid != (gid_t) -1) && !gid_valid(kegid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (rgid != (gid_t) -1) {
|
|
if (gid_eq(old->gid, krgid) ||
|
|
gid_eq(old->egid, krgid) ||
|
|
ns_capable(old->user_ns, CAP_SETGID))
|
|
new->gid = krgid;
|
|
else
|
|
goto error;
|
|
}
|
|
if (egid != (gid_t) -1) {
|
|
if (gid_eq(old->gid, kegid) ||
|
|
gid_eq(old->egid, kegid) ||
|
|
gid_eq(old->sgid, kegid) ||
|
|
ns_capable(old->user_ns, CAP_SETGID))
|
|
new->egid = kegid;
|
|
else
|
|
goto error;
|
|
}
|
|
|
|
if (rgid != (gid_t) -1 ||
|
|
(egid != (gid_t) -1 && !gid_eq(kegid, old->gid)))
|
|
new->sgid = new->egid;
|
|
new->fsgid = new->egid;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* setgid() is implemented like SysV w/ SAVED_IDS
|
|
*
|
|
* SMP: Same implicit races as above.
|
|
*/
|
|
SYSCALL_DEFINE1(setgid, gid_t, gid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kgid_t kgid;
|
|
|
|
kgid = make_kgid(ns, gid);
|
|
if (!gid_valid(kgid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (ns_capable(old->user_ns, CAP_SETGID))
|
|
new->gid = new->egid = new->sgid = new->fsgid = kgid;
|
|
else if (gid_eq(kgid, old->gid) || gid_eq(kgid, old->sgid))
|
|
new->egid = new->fsgid = kgid;
|
|
else
|
|
goto error;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* change the user struct in a credentials set to match the new UID
|
|
*/
|
|
static int set_user(struct cred *new)
|
|
{
|
|
struct user_struct *new_user;
|
|
|
|
new_user = alloc_uid(new->uid);
|
|
if (!new_user)
|
|
return -EAGAIN;
|
|
|
|
/*
|
|
* We don't fail in case of NPROC limit excess here because too many
|
|
* poorly written programs don't check set*uid() return code, assuming
|
|
* it never fails if called by root. We may still enforce NPROC limit
|
|
* for programs doing set*uid()+execve() by harmlessly deferring the
|
|
* failure to the execve() stage.
|
|
*/
|
|
if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) &&
|
|
new_user != INIT_USER)
|
|
current->flags |= PF_NPROC_EXCEEDED;
|
|
else
|
|
current->flags &= ~PF_NPROC_EXCEEDED;
|
|
|
|
free_uid(new->user);
|
|
new->user = new_user;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Unprivileged users may change the real uid to the effective uid
|
|
* or vice versa. (BSD-style)
|
|
*
|
|
* If you set the real uid at all, or set the effective uid to a value not
|
|
* equal to the real uid, then the saved uid is set to the new effective uid.
|
|
*
|
|
* This makes it possible for a setuid program to completely drop its
|
|
* privileges, which is often a useful assertion to make when you are doing
|
|
* a security audit over a program.
|
|
*
|
|
* The general idea is that a program which uses just setreuid() will be
|
|
* 100% compatible with BSD. A program which uses just setuid() will be
|
|
* 100% compatible with POSIX with saved IDs.
|
|
*/
|
|
SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kuid_t kruid, keuid;
|
|
|
|
kruid = make_kuid(ns, ruid);
|
|
keuid = make_kuid(ns, euid);
|
|
|
|
if ((ruid != (uid_t) -1) && !uid_valid(kruid))
|
|
return -EINVAL;
|
|
if ((euid != (uid_t) -1) && !uid_valid(keuid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (ruid != (uid_t) -1) {
|
|
new->uid = kruid;
|
|
if (!uid_eq(old->uid, kruid) &&
|
|
!uid_eq(old->euid, kruid) &&
|
|
!ns_capable(old->user_ns, CAP_SETUID))
|
|
goto error;
|
|
}
|
|
|
|
if (euid != (uid_t) -1) {
|
|
new->euid = keuid;
|
|
if (!uid_eq(old->uid, keuid) &&
|
|
!uid_eq(old->euid, keuid) &&
|
|
!uid_eq(old->suid, keuid) &&
|
|
!ns_capable(old->user_ns, CAP_SETUID))
|
|
goto error;
|
|
}
|
|
|
|
if (!uid_eq(new->uid, old->uid)) {
|
|
retval = set_user(new);
|
|
if (retval < 0)
|
|
goto error;
|
|
}
|
|
if (ruid != (uid_t) -1 ||
|
|
(euid != (uid_t) -1 && !uid_eq(keuid, old->uid)))
|
|
new->suid = new->euid;
|
|
new->fsuid = new->euid;
|
|
|
|
retval = security_task_fix_setuid(new, old, LSM_SETID_RE);
|
|
if (retval < 0)
|
|
goto error;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* setuid() is implemented like SysV with SAVED_IDS
|
|
*
|
|
* Note that SAVED_ID's is deficient in that a setuid root program
|
|
* like sendmail, for example, cannot set its uid to be a normal
|
|
* user and then switch back, because if you're root, setuid() sets
|
|
* the saved uid too. If you don't like this, blame the bright people
|
|
* in the POSIX committee and/or USG. Note that the BSD-style setreuid()
|
|
* will allow a root program to temporarily drop privileges and be able to
|
|
* regain them by swapping the real and effective uid.
|
|
*/
|
|
SYSCALL_DEFINE1(setuid, uid_t, uid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kuid_t kuid;
|
|
|
|
kuid = make_kuid(ns, uid);
|
|
if (!uid_valid(kuid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (ns_capable(old->user_ns, CAP_SETUID)) {
|
|
new->suid = new->uid = kuid;
|
|
if (!uid_eq(kuid, old->uid)) {
|
|
retval = set_user(new);
|
|
if (retval < 0)
|
|
goto error;
|
|
}
|
|
} else if (!uid_eq(kuid, old->uid) && !uid_eq(kuid, new->suid)) {
|
|
goto error;
|
|
}
|
|
|
|
new->fsuid = new->euid = kuid;
|
|
|
|
retval = security_task_fix_setuid(new, old, LSM_SETID_ID);
|
|
if (retval < 0)
|
|
goto error;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* This function implements a generic ability to update ruid, euid,
|
|
* and suid. This allows you to implement the 4.4 compatible seteuid().
|
|
*/
|
|
SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kuid_t kruid, keuid, ksuid;
|
|
|
|
kruid = make_kuid(ns, ruid);
|
|
keuid = make_kuid(ns, euid);
|
|
ksuid = make_kuid(ns, suid);
|
|
|
|
if ((ruid != (uid_t) -1) && !uid_valid(kruid))
|
|
return -EINVAL;
|
|
|
|
if ((euid != (uid_t) -1) && !uid_valid(keuid))
|
|
return -EINVAL;
|
|
|
|
if ((suid != (uid_t) -1) && !uid_valid(ksuid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (!ns_capable(old->user_ns, CAP_SETUID)) {
|
|
if (ruid != (uid_t) -1 && !uid_eq(kruid, old->uid) &&
|
|
!uid_eq(kruid, old->euid) && !uid_eq(kruid, old->suid))
|
|
goto error;
|
|
if (euid != (uid_t) -1 && !uid_eq(keuid, old->uid) &&
|
|
!uid_eq(keuid, old->euid) && !uid_eq(keuid, old->suid))
|
|
goto error;
|
|
if (suid != (uid_t) -1 && !uid_eq(ksuid, old->uid) &&
|
|
!uid_eq(ksuid, old->euid) && !uid_eq(ksuid, old->suid))
|
|
goto error;
|
|
}
|
|
|
|
if (ruid != (uid_t) -1) {
|
|
new->uid = kruid;
|
|
if (!uid_eq(kruid, old->uid)) {
|
|
retval = set_user(new);
|
|
if (retval < 0)
|
|
goto error;
|
|
}
|
|
}
|
|
if (euid != (uid_t) -1)
|
|
new->euid = keuid;
|
|
if (suid != (uid_t) -1)
|
|
new->suid = ksuid;
|
|
new->fsuid = new->euid;
|
|
|
|
retval = security_task_fix_setuid(new, old, LSM_SETID_RES);
|
|
if (retval < 0)
|
|
goto error;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
SYSCALL_DEFINE3(getresuid, uid_t __user *, ruidp, uid_t __user *, euidp, uid_t __user *, suidp)
|
|
{
|
|
const struct cred *cred = current_cred();
|
|
int retval;
|
|
uid_t ruid, euid, suid;
|
|
|
|
ruid = from_kuid_munged(cred->user_ns, cred->uid);
|
|
euid = from_kuid_munged(cred->user_ns, cred->euid);
|
|
suid = from_kuid_munged(cred->user_ns, cred->suid);
|
|
|
|
retval = put_user(ruid, ruidp);
|
|
if (!retval) {
|
|
retval = put_user(euid, euidp);
|
|
if (!retval)
|
|
return put_user(suid, suidp);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Same as above, but for rgid, egid, sgid.
|
|
*/
|
|
SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
|
|
{
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
int retval;
|
|
kgid_t krgid, kegid, ksgid;
|
|
|
|
krgid = make_kgid(ns, rgid);
|
|
kegid = make_kgid(ns, egid);
|
|
ksgid = make_kgid(ns, sgid);
|
|
|
|
if ((rgid != (gid_t) -1) && !gid_valid(krgid))
|
|
return -EINVAL;
|
|
if ((egid != (gid_t) -1) && !gid_valid(kegid))
|
|
return -EINVAL;
|
|
if ((sgid != (gid_t) -1) && !gid_valid(ksgid))
|
|
return -EINVAL;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return -ENOMEM;
|
|
old = current_cred();
|
|
|
|
retval = -EPERM;
|
|
if (!ns_capable(old->user_ns, CAP_SETGID)) {
|
|
if (rgid != (gid_t) -1 && !gid_eq(krgid, old->gid) &&
|
|
!gid_eq(krgid, old->egid) && !gid_eq(krgid, old->sgid))
|
|
goto error;
|
|
if (egid != (gid_t) -1 && !gid_eq(kegid, old->gid) &&
|
|
!gid_eq(kegid, old->egid) && !gid_eq(kegid, old->sgid))
|
|
goto error;
|
|
if (sgid != (gid_t) -1 && !gid_eq(ksgid, old->gid) &&
|
|
!gid_eq(ksgid, old->egid) && !gid_eq(ksgid, old->sgid))
|
|
goto error;
|
|
}
|
|
|
|
if (rgid != (gid_t) -1)
|
|
new->gid = krgid;
|
|
if (egid != (gid_t) -1)
|
|
new->egid = kegid;
|
|
if (sgid != (gid_t) -1)
|
|
new->sgid = ksgid;
|
|
new->fsgid = new->egid;
|
|
|
|
return commit_creds(new);
|
|
|
|
error:
|
|
abort_creds(new);
|
|
return retval;
|
|
}
|
|
|
|
SYSCALL_DEFINE3(getresgid, gid_t __user *, rgidp, gid_t __user *, egidp, gid_t __user *, sgidp)
|
|
{
|
|
const struct cred *cred = current_cred();
|
|
int retval;
|
|
gid_t rgid, egid, sgid;
|
|
|
|
rgid = from_kgid_munged(cred->user_ns, cred->gid);
|
|
egid = from_kgid_munged(cred->user_ns, cred->egid);
|
|
sgid = from_kgid_munged(cred->user_ns, cred->sgid);
|
|
|
|
retval = put_user(rgid, rgidp);
|
|
if (!retval) {
|
|
retval = put_user(egid, egidp);
|
|
if (!retval)
|
|
retval = put_user(sgid, sgidp);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*
|
|
* "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
|
|
* is used for "access()" and for the NFS daemon (letting nfsd stay at
|
|
* whatever uid it wants to). It normally shadows "euid", except when
|
|
* explicitly set by setfsuid() or for access..
|
|
*/
|
|
SYSCALL_DEFINE1(setfsuid, uid_t, uid)
|
|
{
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
uid_t old_fsuid;
|
|
kuid_t kuid;
|
|
|
|
old = current_cred();
|
|
old_fsuid = from_kuid_munged(old->user_ns, old->fsuid);
|
|
|
|
kuid = make_kuid(old->user_ns, uid);
|
|
if (!uid_valid(kuid))
|
|
return old_fsuid;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return old_fsuid;
|
|
|
|
if (uid_eq(kuid, old->uid) || uid_eq(kuid, old->euid) ||
|
|
uid_eq(kuid, old->suid) || uid_eq(kuid, old->fsuid) ||
|
|
ns_capable(old->user_ns, CAP_SETUID)) {
|
|
if (!uid_eq(kuid, old->fsuid)) {
|
|
new->fsuid = kuid;
|
|
if (security_task_fix_setuid(new, old, LSM_SETID_FS) == 0)
|
|
goto change_okay;
|
|
}
|
|
}
|
|
|
|
abort_creds(new);
|
|
return old_fsuid;
|
|
|
|
change_okay:
|
|
commit_creds(new);
|
|
return old_fsuid;
|
|
}
|
|
|
|
/*
|
|
* Samma på svenska..
|
|
*/
|
|
SYSCALL_DEFINE1(setfsgid, gid_t, gid)
|
|
{
|
|
const struct cred *old;
|
|
struct cred *new;
|
|
gid_t old_fsgid;
|
|
kgid_t kgid;
|
|
|
|
old = current_cred();
|
|
old_fsgid = from_kgid_munged(old->user_ns, old->fsgid);
|
|
|
|
kgid = make_kgid(old->user_ns, gid);
|
|
if (!gid_valid(kgid))
|
|
return old_fsgid;
|
|
|
|
new = prepare_creds();
|
|
if (!new)
|
|
return old_fsgid;
|
|
|
|
if (gid_eq(kgid, old->gid) || gid_eq(kgid, old->egid) ||
|
|
gid_eq(kgid, old->sgid) || gid_eq(kgid, old->fsgid) ||
|
|
ns_capable(old->user_ns, CAP_SETGID)) {
|
|
if (!gid_eq(kgid, old->fsgid)) {
|
|
new->fsgid = kgid;
|
|
goto change_okay;
|
|
}
|
|
}
|
|
|
|
abort_creds(new);
|
|
return old_fsgid;
|
|
|
|
change_okay:
|
|
commit_creds(new);
|
|
return old_fsgid;
|
|
}
|
|
#endif /* CONFIG_MULTIUSER */
|
|
|
|
/**
|
|
* sys_getpid - return the thread group id of the current process
|
|
*
|
|
* Note, despite the name, this returns the tgid not the pid. The tgid and
|
|
* the pid are identical unless CLONE_THREAD was specified on clone() in
|
|
* which case the tgid is the same in all threads of the same group.
|
|
*
|
|
* This is SMP safe as current->tgid does not change.
|
|
*/
|
|
SYSCALL_DEFINE0(getpid)
|
|
{
|
|
return task_tgid_vnr(current);
|
|
}
|
|
|
|
/* Thread ID - the internal kernel "pid" */
|
|
SYSCALL_DEFINE0(gettid)
|
|
{
|
|
return task_pid_vnr(current);
|
|
}
|
|
|
|
/*
|
|
* Accessing ->real_parent is not SMP-safe, it could
|
|
* change from under us. However, we can use a stale
|
|
* value of ->real_parent under rcu_read_lock(), see
|
|
* release_task()->call_rcu(delayed_put_task_struct).
|
|
*/
|
|
SYSCALL_DEFINE0(getppid)
|
|
{
|
|
int pid;
|
|
|
|
rcu_read_lock();
|
|
pid = task_tgid_vnr(rcu_dereference(current->real_parent));
|
|
rcu_read_unlock();
|
|
|
|
return pid;
|
|
}
|
|
|
|
SYSCALL_DEFINE0(getuid)
|
|
{
|
|
/* Only we change this so SMP safe */
|
|
return from_kuid_munged(current_user_ns(), current_uid());
|
|
}
|
|
|
|
SYSCALL_DEFINE0(geteuid)
|
|
{
|
|
/* Only we change this so SMP safe */
|
|
return from_kuid_munged(current_user_ns(), current_euid());
|
|
}
|
|
|
|
SYSCALL_DEFINE0(getgid)
|
|
{
|
|
/* Only we change this so SMP safe */
|
|
return from_kgid_munged(current_user_ns(), current_gid());
|
|
}
|
|
|
|
SYSCALL_DEFINE0(getegid)
|
|
{
|
|
/* Only we change this so SMP safe */
|
|
return from_kgid_munged(current_user_ns(), current_egid());
|
|
}
|
|
|
|
void do_sys_times(struct tms *tms)
|
|
{
|
|
cputime_t tgutime, tgstime, cutime, cstime;
|
|
|
|
thread_group_cputime_adjusted(current, &tgutime, &tgstime);
|
|
cutime = current->signal->cutime;
|
|
cstime = current->signal->cstime;
|
|
tms->tms_utime = cputime_to_clock_t(tgutime);
|
|
tms->tms_stime = cputime_to_clock_t(tgstime);
|
|
tms->tms_cutime = cputime_to_clock_t(cutime);
|
|
tms->tms_cstime = cputime_to_clock_t(cstime);
|
|
}
|
|
|
|
SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
|
|
{
|
|
if (tbuf) {
|
|
struct tms tmp;
|
|
|
|
do_sys_times(&tmp);
|
|
if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
|
|
return -EFAULT;
|
|
}
|
|
force_successful_syscall_return();
|
|
return (long) jiffies_64_to_clock_t(get_jiffies_64());
|
|
}
|
|
|
|
/*
|
|
* This needs some heavy checking ...
|
|
* I just haven't the stomach for it. I also don't fully
|
|
* understand sessions/pgrp etc. Let somebody who does explain it.
|
|
*
|
|
* OK, I think I have the protection semantics right.... this is really
|
|
* only important on a multi-user system anyway, to make sure one user
|
|
* can't send a signal to a process owned by another. -TYT, 12/12/91
|
|
*
|
|
* !PF_FORKNOEXEC check to conform completely to POSIX.
|
|
*/
|
|
SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
|
|
{
|
|
struct task_struct *p;
|
|
struct task_struct *group_leader = current->group_leader;
|
|
struct pid *pgrp;
|
|
int err;
|
|
|
|
if (!pid)
|
|
pid = task_pid_vnr(group_leader);
|
|
if (!pgid)
|
|
pgid = pid;
|
|
if (pgid < 0)
|
|
return -EINVAL;
|
|
rcu_read_lock();
|
|
|
|
/* From this point forward we keep holding onto the tasklist lock
|
|
* so that our parent does not change from under us. -DaveM
|
|
*/
|
|
write_lock_irq(&tasklist_lock);
|
|
|
|
err = -ESRCH;
|
|
p = find_task_by_vpid(pid);
|
|
if (!p)
|
|
goto out;
|
|
|
|
err = -EINVAL;
|
|
if (!thread_group_leader(p))
|
|
goto out;
|
|
|
|
if (same_thread_group(p->real_parent, group_leader)) {
|
|
err = -EPERM;
|
|
if (task_session(p) != task_session(group_leader))
|
|
goto out;
|
|
err = -EACCES;
|
|
if (!(p->flags & PF_FORKNOEXEC))
|
|
goto out;
|
|
} else {
|
|
err = -ESRCH;
|
|
if (p != group_leader)
|
|
goto out;
|
|
}
|
|
|
|
err = -EPERM;
|
|
if (p->signal->leader)
|
|
goto out;
|
|
|
|
pgrp = task_pid(p);
|
|
if (pgid != pid) {
|
|
struct task_struct *g;
|
|
|
|
pgrp = find_vpid(pgid);
|
|
g = pid_task(pgrp, PIDTYPE_PGID);
|
|
if (!g || task_session(g) != task_session(group_leader))
|
|
goto out;
|
|
}
|
|
|
|
err = security_task_setpgid(p, pgid);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (task_pgrp(p) != pgrp)
|
|
change_pid(p, PIDTYPE_PGID, pgrp);
|
|
|
|
err = 0;
|
|
out:
|
|
/* All paths lead to here, thus we are safe. -DaveM */
|
|
write_unlock_irq(&tasklist_lock);
|
|
rcu_read_unlock();
|
|
return err;
|
|
}
|
|
|
|
SYSCALL_DEFINE1(getpgid, pid_t, pid)
|
|
{
|
|
struct task_struct *p;
|
|
struct pid *grp;
|
|
int retval;
|
|
|
|
rcu_read_lock();
|
|
if (!pid)
|
|
grp = task_pgrp(current);
|
|
else {
|
|
retval = -ESRCH;
|
|
p = find_task_by_vpid(pid);
|
|
if (!p)
|
|
goto out;
|
|
grp = task_pgrp(p);
|
|
if (!grp)
|
|
goto out;
|
|
|
|
retval = security_task_getpgid(p);
|
|
if (retval)
|
|
goto out;
|
|
}
|
|
retval = pid_vnr(grp);
|
|
out:
|
|
rcu_read_unlock();
|
|
return retval;
|
|
}
|
|
|
|
#ifdef __ARCH_WANT_SYS_GETPGRP
|
|
|
|
SYSCALL_DEFINE0(getpgrp)
|
|
{
|
|
return sys_getpgid(0);
|
|
}
|
|
|
|
#endif
|
|
|
|
SYSCALL_DEFINE1(getsid, pid_t, pid)
|
|
{
|
|
struct task_struct *p;
|
|
struct pid *sid;
|
|
int retval;
|
|
|
|
rcu_read_lock();
|
|
if (!pid)
|
|
sid = task_session(current);
|
|
else {
|
|
retval = -ESRCH;
|
|
p = find_task_by_vpid(pid);
|
|
if (!p)
|
|
goto out;
|
|
sid = task_session(p);
|
|
if (!sid)
|
|
goto out;
|
|
|
|
retval = security_task_getsid(p);
|
|
if (retval)
|
|
goto out;
|
|
}
|
|
retval = pid_vnr(sid);
|
|
out:
|
|
rcu_read_unlock();
|
|
return retval;
|
|
}
|
|
|
|
static void set_special_pids(struct pid *pid)
|
|
{
|
|
struct task_struct *curr = current->group_leader;
|
|
|
|
if (task_session(curr) != pid)
|
|
change_pid(curr, PIDTYPE_SID, pid);
|
|
|
|
if (task_pgrp(curr) != pid)
|
|
change_pid(curr, PIDTYPE_PGID, pid);
|
|
}
|
|
|
|
SYSCALL_DEFINE0(setsid)
|
|
{
|
|
struct task_struct *group_leader = current->group_leader;
|
|
struct pid *sid = task_pid(group_leader);
|
|
pid_t session = pid_vnr(sid);
|
|
int err = -EPERM;
|
|
|
|
write_lock_irq(&tasklist_lock);
|
|
/* Fail if I am already a session leader */
|
|
if (group_leader->signal->leader)
|
|
goto out;
|
|
|
|
/* Fail if a process group id already exists that equals the
|
|
* proposed session id.
|
|
*/
|
|
if (pid_task(sid, PIDTYPE_PGID))
|
|
goto out;
|
|
|
|
group_leader->signal->leader = 1;
|
|
set_special_pids(sid);
|
|
|
|
proc_clear_tty(group_leader);
|
|
|
|
err = session;
|
|
out:
|
|
write_unlock_irq(&tasklist_lock);
|
|
if (err > 0) {
|
|
proc_sid_connector(group_leader);
|
|
sched_autogroup_create_attach(group_leader);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
DECLARE_RWSEM(uts_sem);
|
|
|
|
#ifdef COMPAT_UTS_MACHINE
|
|
#define override_architecture(name) \
|
|
(personality(current->personality) == PER_LINUX32 && \
|
|
copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
|
|
sizeof(COMPAT_UTS_MACHINE)))
|
|
#else
|
|
#define override_architecture(name) 0
|
|
#endif
|
|
|
|
/*
|
|
* Work around broken programs that cannot handle "Linux 3.0".
|
|
* Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
|
|
* And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60.
|
|
*/
|
|
static int override_release(char __user *release, size_t len)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (current->personality & UNAME26) {
|
|
const char *rest = UTS_RELEASE;
|
|
char buf[65] = { 0 };
|
|
int ndots = 0;
|
|
unsigned v;
|
|
size_t copy;
|
|
|
|
while (*rest) {
|
|
if (*rest == '.' && ++ndots >= 3)
|
|
break;
|
|
if (!isdigit(*rest) && *rest != '.')
|
|
break;
|
|
rest++;
|
|
}
|
|
v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60;
|
|
copy = clamp_t(size_t, len, 1, sizeof(buf));
|
|
copy = scnprintf(buf, copy, "2.6.%u%s", v, rest);
|
|
ret = copy_to_user(release, buf, copy + 1);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
|
|
{
|
|
int errno = 0;
|
|
|
|
down_read(&uts_sem);
|
|
if (copy_to_user(name, utsname(), sizeof *name))
|
|
errno = -EFAULT;
|
|
up_read(&uts_sem);
|
|
|
|
if (!errno && override_release(name->release, sizeof(name->release)))
|
|
errno = -EFAULT;
|
|
if (!errno && override_architecture(name))
|
|
errno = -EFAULT;
|
|
return errno;
|
|
}
|
|
|
|
#ifdef __ARCH_WANT_SYS_OLD_UNAME
|
|
/*
|
|
* Old cruft
|
|
*/
|
|
SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
|
|
{
|
|
int error = 0;
|
|
|
|
if (!name)
|
|
return -EFAULT;
|
|
|
|
down_read(&uts_sem);
|
|
if (copy_to_user(name, utsname(), sizeof(*name)))
|
|
error = -EFAULT;
|
|
up_read(&uts_sem);
|
|
|
|
if (!error && override_release(name->release, sizeof(name->release)))
|
|
error = -EFAULT;
|
|
if (!error && override_architecture(name))
|
|
error = -EFAULT;
|
|
return error;
|
|
}
|
|
|
|
SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
|
|
{
|
|
int error;
|
|
|
|
if (!name)
|
|
return -EFAULT;
|
|
if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
|
|
return -EFAULT;
|
|
|
|
down_read(&uts_sem);
|
|
error = __copy_to_user(&name->sysname, &utsname()->sysname,
|
|
__OLD_UTS_LEN);
|
|
error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
|
|
error |= __copy_to_user(&name->nodename, &utsname()->nodename,
|
|
__OLD_UTS_LEN);
|
|
error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
|
|
error |= __copy_to_user(&name->release, &utsname()->release,
|
|
__OLD_UTS_LEN);
|
|
error |= __put_user(0, name->release + __OLD_UTS_LEN);
|
|
error |= __copy_to_user(&name->version, &utsname()->version,
|
|
__OLD_UTS_LEN);
|
|
error |= __put_user(0, name->version + __OLD_UTS_LEN);
|
|
error |= __copy_to_user(&name->machine, &utsname()->machine,
|
|
__OLD_UTS_LEN);
|
|
error |= __put_user(0, name->machine + __OLD_UTS_LEN);
|
|
up_read(&uts_sem);
|
|
|
|
if (!error && override_architecture(name))
|
|
error = -EFAULT;
|
|
if (!error && override_release(name->release, sizeof(name->release)))
|
|
error = -EFAULT;
|
|
return error ? -EFAULT : 0;
|
|
}
|
|
#endif
|
|
|
|
SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
|
|
{
|
|
int errno;
|
|
char tmp[__NEW_UTS_LEN];
|
|
|
|
if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (len < 0 || len > __NEW_UTS_LEN)
|
|
return -EINVAL;
|
|
down_write(&uts_sem);
|
|
errno = -EFAULT;
|
|
if (!copy_from_user(tmp, name, len)) {
|
|
struct new_utsname *u = utsname();
|
|
|
|
memcpy(u->nodename, tmp, len);
|
|
memset(u->nodename + len, 0, sizeof(u->nodename) - len);
|
|
errno = 0;
|
|
uts_proc_notify(UTS_PROC_HOSTNAME);
|
|
}
|
|
up_write(&uts_sem);
|
|
return errno;
|
|
}
|
|
|
|
#ifdef __ARCH_WANT_SYS_GETHOSTNAME
|
|
|
|
SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
|
|
{
|
|
int i, errno;
|
|
struct new_utsname *u;
|
|
|
|
if (len < 0)
|
|
return -EINVAL;
|
|
down_read(&uts_sem);
|
|
u = utsname();
|
|
i = 1 + strlen(u->nodename);
|
|
if (i > len)
|
|
i = len;
|
|
errno = 0;
|
|
if (copy_to_user(name, u->nodename, i))
|
|
errno = -EFAULT;
|
|
up_read(&uts_sem);
|
|
return errno;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Only setdomainname; getdomainname can be implemented by calling
|
|
* uname()
|
|
*/
|
|
SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
|
|
{
|
|
int errno;
|
|
char tmp[__NEW_UTS_LEN];
|
|
|
|
if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
if (len < 0 || len > __NEW_UTS_LEN)
|
|
return -EINVAL;
|
|
|
|
down_write(&uts_sem);
|
|
errno = -EFAULT;
|
|
if (!copy_from_user(tmp, name, len)) {
|
|
struct new_utsname *u = utsname();
|
|
|
|
memcpy(u->domainname, tmp, len);
|
|
memset(u->domainname + len, 0, sizeof(u->domainname) - len);
|
|
errno = 0;
|
|
uts_proc_notify(UTS_PROC_DOMAINNAME);
|
|
}
|
|
up_write(&uts_sem);
|
|
return errno;
|
|
}
|
|
|
|
SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
|
|
{
|
|
struct rlimit value;
|
|
int ret;
|
|
|
|
ret = do_prlimit(current, resource, NULL, &value);
|
|
if (!ret)
|
|
ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
|
|
|
|
/*
|
|
* Back compatibility for getrlimit. Needed for some apps.
|
|
*/
|
|
SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
|
|
struct rlimit __user *, rlim)
|
|
{
|
|
struct rlimit x;
|
|
if (resource >= RLIM_NLIMITS)
|
|
return -EINVAL;
|
|
|
|
task_lock(current->group_leader);
|
|
x = current->signal->rlim[resource];
|
|
task_unlock(current->group_leader);
|
|
if (x.rlim_cur > 0x7FFFFFFF)
|
|
x.rlim_cur = 0x7FFFFFFF;
|
|
if (x.rlim_max > 0x7FFFFFFF)
|
|
x.rlim_max = 0x7FFFFFFF;
|
|
return copy_to_user(rlim, &x, sizeof(x)) ? -EFAULT : 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static inline bool rlim64_is_infinity(__u64 rlim64)
|
|
{
|
|
#if BITS_PER_LONG < 64
|
|
return rlim64 >= ULONG_MAX;
|
|
#else
|
|
return rlim64 == RLIM64_INFINITY;
|
|
#endif
|
|
}
|
|
|
|
static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
|
|
{
|
|
if (rlim->rlim_cur == RLIM_INFINITY)
|
|
rlim64->rlim_cur = RLIM64_INFINITY;
|
|
else
|
|
rlim64->rlim_cur = rlim->rlim_cur;
|
|
if (rlim->rlim_max == RLIM_INFINITY)
|
|
rlim64->rlim_max = RLIM64_INFINITY;
|
|
else
|
|
rlim64->rlim_max = rlim->rlim_max;
|
|
}
|
|
|
|
static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
|
|
{
|
|
if (rlim64_is_infinity(rlim64->rlim_cur))
|
|
rlim->rlim_cur = RLIM_INFINITY;
|
|
else
|
|
rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
|
|
if (rlim64_is_infinity(rlim64->rlim_max))
|
|
rlim->rlim_max = RLIM_INFINITY;
|
|
else
|
|
rlim->rlim_max = (unsigned long)rlim64->rlim_max;
|
|
}
|
|
|
|
/* make sure you are allowed to change @tsk limits before calling this */
|
|
int do_prlimit(struct task_struct *tsk, unsigned int resource,
|
|
struct rlimit *new_rlim, struct rlimit *old_rlim)
|
|
{
|
|
struct rlimit *rlim;
|
|
int retval = 0;
|
|
|
|
if (resource >= RLIM_NLIMITS)
|
|
return -EINVAL;
|
|
if (new_rlim) {
|
|
if (new_rlim->rlim_cur > new_rlim->rlim_max)
|
|
return -EINVAL;
|
|
if (resource == RLIMIT_NOFILE &&
|
|
new_rlim->rlim_max > sysctl_nr_open)
|
|
return -EPERM;
|
|
}
|
|
|
|
/* protect tsk->signal and tsk->sighand from disappearing */
|
|
read_lock(&tasklist_lock);
|
|
if (!tsk->sighand) {
|
|
retval = -ESRCH;
|
|
goto out;
|
|
}
|
|
|
|
rlim = tsk->signal->rlim + resource;
|
|
task_lock(tsk->group_leader);
|
|
if (new_rlim) {
|
|
/* Keep the capable check against init_user_ns until
|
|
cgroups can contain all limits */
|
|
if (new_rlim->rlim_max > rlim->rlim_max &&
|
|
!capable(CAP_SYS_RESOURCE))
|
|
retval = -EPERM;
|
|
if (!retval)
|
|
retval = security_task_setrlimit(tsk->group_leader,
|
|
resource, new_rlim);
|
|
if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
|
|
/*
|
|
* The caller is asking for an immediate RLIMIT_CPU
|
|
* expiry. But we use the zero value to mean "it was
|
|
* never set". So let's cheat and make it one second
|
|
* instead
|
|
*/
|
|
new_rlim->rlim_cur = 1;
|
|
}
|
|
}
|
|
if (!retval) {
|
|
if (old_rlim)
|
|
*old_rlim = *rlim;
|
|
if (new_rlim)
|
|
*rlim = *new_rlim;
|
|
}
|
|
task_unlock(tsk->group_leader);
|
|
|
|
/*
|
|
* RLIMIT_CPU handling. Note that the kernel fails to return an error
|
|
* code if it rejected the user's attempt to set RLIMIT_CPU. This is a
|
|
* very long-standing error, and fixing it now risks breakage of
|
|
* applications, so we live with it
|
|
*/
|
|
if (!retval && new_rlim && resource == RLIMIT_CPU &&
|
|
new_rlim->rlim_cur != RLIM_INFINITY)
|
|
update_rlimit_cpu(tsk, new_rlim->rlim_cur);
|
|
out:
|
|
read_unlock(&tasklist_lock);
|
|
return retval;
|
|
}
|
|
|
|
/* rcu lock must be held */
|
|
static int check_prlimit_permission(struct task_struct *task)
|
|
{
|
|
const struct cred *cred = current_cred(), *tcred;
|
|
|
|
if (current == task)
|
|
return 0;
|
|
|
|
tcred = __task_cred(task);
|
|
if (uid_eq(cred->uid, tcred->euid) &&
|
|
uid_eq(cred->uid, tcred->suid) &&
|
|
uid_eq(cred->uid, tcred->uid) &&
|
|
gid_eq(cred->gid, tcred->egid) &&
|
|
gid_eq(cred->gid, tcred->sgid) &&
|
|
gid_eq(cred->gid, tcred->gid))
|
|
return 0;
|
|
if (ns_capable(tcred->user_ns, CAP_SYS_RESOURCE))
|
|
return 0;
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
|
|
const struct rlimit64 __user *, new_rlim,
|
|
struct rlimit64 __user *, old_rlim)
|
|
{
|
|
struct rlimit64 old64, new64;
|
|
struct rlimit old, new;
|
|
struct task_struct *tsk;
|
|
int ret;
|
|
|
|
if (new_rlim) {
|
|
if (copy_from_user(&new64, new_rlim, sizeof(new64)))
|
|
return -EFAULT;
|
|
rlim64_to_rlim(&new64, &new);
|
|
}
|
|
|
|
rcu_read_lock();
|
|
tsk = pid ? find_task_by_vpid(pid) : current;
|
|
if (!tsk) {
|
|
rcu_read_unlock();
|
|
return -ESRCH;
|
|
}
|
|
ret = check_prlimit_permission(tsk);
|
|
if (ret) {
|
|
rcu_read_unlock();
|
|
return ret;
|
|
}
|
|
get_task_struct(tsk);
|
|
rcu_read_unlock();
|
|
|
|
ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
|
|
old_rlim ? &old : NULL);
|
|
|
|
if (!ret && old_rlim) {
|
|
rlim_to_rlim64(&old, &old64);
|
|
if (copy_to_user(old_rlim, &old64, sizeof(old64)))
|
|
ret = -EFAULT;
|
|
}
|
|
|
|
put_task_struct(tsk);
|
|
return ret;
|
|
}
|
|
|
|
SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
|
|
{
|
|
struct rlimit new_rlim;
|
|
|
|
if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
|
|
return -EFAULT;
|
|
return do_prlimit(current, resource, &new_rlim, NULL);
|
|
}
|
|
|
|
/*
|
|
* It would make sense to put struct rusage in the task_struct,
|
|
* except that would make the task_struct be *really big*. After
|
|
* task_struct gets moved into malloc'ed memory, it would
|
|
* make sense to do this. It will make moving the rest of the information
|
|
* a lot simpler! (Which we're not doing right now because we're not
|
|
* measuring them yet).
|
|
*
|
|
* When sampling multiple threads for RUSAGE_SELF, under SMP we might have
|
|
* races with threads incrementing their own counters. But since word
|
|
* reads are atomic, we either get new values or old values and we don't
|
|
* care which for the sums. We always take the siglock to protect reading
|
|
* the c* fields from p->signal from races with exit.c updating those
|
|
* fields when reaping, so a sample either gets all the additions of a
|
|
* given child after it's reaped, or none so this sample is before reaping.
|
|
*
|
|
* Locking:
|
|
* We need to take the siglock for CHILDEREN, SELF and BOTH
|
|
* for the cases current multithreaded, non-current single threaded
|
|
* non-current multithreaded. Thread traversal is now safe with
|
|
* the siglock held.
|
|
* Strictly speaking, we donot need to take the siglock if we are current and
|
|
* single threaded, as no one else can take our signal_struct away, no one
|
|
* else can reap the children to update signal->c* counters, and no one else
|
|
* can race with the signal-> fields. If we do not take any lock, the
|
|
* signal-> fields could be read out of order while another thread was just
|
|
* exiting. So we should place a read memory barrier when we avoid the lock.
|
|
* On the writer side, write memory barrier is implied in __exit_signal
|
|
* as __exit_signal releases the siglock spinlock after updating the signal->
|
|
* fields. But we don't do this yet to keep things simple.
|
|
*
|
|
*/
|
|
|
|
static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r)
|
|
{
|
|
r->ru_nvcsw += t->nvcsw;
|
|
r->ru_nivcsw += t->nivcsw;
|
|
r->ru_minflt += t->min_flt;
|
|
r->ru_majflt += t->maj_flt;
|
|
r->ru_inblock += task_io_get_inblock(t);
|
|
r->ru_oublock += task_io_get_oublock(t);
|
|
}
|
|
|
|
static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
|
|
{
|
|
struct task_struct *t;
|
|
unsigned long flags;
|
|
cputime_t tgutime, tgstime, utime, stime;
|
|
unsigned long maxrss = 0;
|
|
|
|
memset((char *)r, 0, sizeof (*r));
|
|
utime = stime = 0;
|
|
|
|
if (who == RUSAGE_THREAD) {
|
|
task_cputime_adjusted(current, &utime, &stime);
|
|
accumulate_thread_rusage(p, r);
|
|
maxrss = p->signal->maxrss;
|
|
goto out;
|
|
}
|
|
|
|
if (!lock_task_sighand(p, &flags))
|
|
return;
|
|
|
|
switch (who) {
|
|
case RUSAGE_BOTH:
|
|
case RUSAGE_CHILDREN:
|
|
utime = p->signal->cutime;
|
|
stime = p->signal->cstime;
|
|
r->ru_nvcsw = p->signal->cnvcsw;
|
|
r->ru_nivcsw = p->signal->cnivcsw;
|
|
r->ru_minflt = p->signal->cmin_flt;
|
|
r->ru_majflt = p->signal->cmaj_flt;
|
|
r->ru_inblock = p->signal->cinblock;
|
|
r->ru_oublock = p->signal->coublock;
|
|
maxrss = p->signal->cmaxrss;
|
|
|
|
if (who == RUSAGE_CHILDREN)
|
|
break;
|
|
|
|
case RUSAGE_SELF:
|
|
thread_group_cputime_adjusted(p, &tgutime, &tgstime);
|
|
utime += tgutime;
|
|
stime += tgstime;
|
|
r->ru_nvcsw += p->signal->nvcsw;
|
|
r->ru_nivcsw += p->signal->nivcsw;
|
|
r->ru_minflt += p->signal->min_flt;
|
|
r->ru_majflt += p->signal->maj_flt;
|
|
r->ru_inblock += p->signal->inblock;
|
|
r->ru_oublock += p->signal->oublock;
|
|
if (maxrss < p->signal->maxrss)
|
|
maxrss = p->signal->maxrss;
|
|
t = p;
|
|
do {
|
|
accumulate_thread_rusage(t, r);
|
|
} while_each_thread(p, t);
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
}
|
|
unlock_task_sighand(p, &flags);
|
|
|
|
out:
|
|
cputime_to_timeval(utime, &r->ru_utime);
|
|
cputime_to_timeval(stime, &r->ru_stime);
|
|
|
|
if (who != RUSAGE_CHILDREN) {
|
|
struct mm_struct *mm = get_task_mm(p);
|
|
|
|
if (mm) {
|
|
setmax_mm_hiwater_rss(&maxrss, mm);
|
|
mmput(mm);
|
|
}
|
|
}
|
|
r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */
|
|
}
|
|
|
|
int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
|
|
{
|
|
struct rusage r;
|
|
|
|
k_getrusage(p, who, &r);
|
|
return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
|
|
}
|
|
|
|
SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
|
|
{
|
|
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
|
|
who != RUSAGE_THREAD)
|
|
return -EINVAL;
|
|
return getrusage(current, who, ru);
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
COMPAT_SYSCALL_DEFINE2(getrusage, int, who, struct compat_rusage __user *, ru)
|
|
{
|
|
struct rusage r;
|
|
|
|
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
|
|
who != RUSAGE_THREAD)
|
|
return -EINVAL;
|
|
|
|
k_getrusage(current, who, &r);
|
|
return put_compat_rusage(&r, ru);
|
|
}
|
|
#endif
|
|
|
|
SYSCALL_DEFINE1(umask, int, mask)
|
|
{
|
|
mask = xchg(¤t->fs->umask, mask & S_IRWXUGO);
|
|
return mask;
|
|
}
|
|
|
|
static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
|
|
{
|
|
struct fd exe;
|
|
struct file *old_exe, *exe_file;
|
|
struct inode *inode;
|
|
int err;
|
|
|
|
exe = fdget(fd);
|
|
if (!exe.file)
|
|
return -EBADF;
|
|
|
|
inode = file_inode(exe.file);
|
|
|
|
/*
|
|
* Because the original mm->exe_file points to executable file, make
|
|
* sure that this one is executable as well, to avoid breaking an
|
|
* overall picture.
|
|
*/
|
|
err = -EACCES;
|
|
if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
|
|
goto exit;
|
|
|
|
err = inode_permission(inode, MAY_EXEC);
|
|
if (err)
|
|
goto exit;
|
|
|
|
/*
|
|
* Forbid mm->exe_file change if old file still mapped.
|
|
*/
|
|
exe_file = get_mm_exe_file(mm);
|
|
err = -EBUSY;
|
|
if (exe_file) {
|
|
struct vm_area_struct *vma;
|
|
|
|
down_read(&mm->mmap_sem);
|
|
for (vma = mm->mmap; vma; vma = vma->vm_next) {
|
|
if (!vma->vm_file)
|
|
continue;
|
|
if (path_equal(&vma->vm_file->f_path,
|
|
&exe_file->f_path))
|
|
goto exit_err;
|
|
}
|
|
|
|
up_read(&mm->mmap_sem);
|
|
fput(exe_file);
|
|
}
|
|
|
|
/*
|
|
* The symlink can be changed only once, just to disallow arbitrary
|
|
* transitions malicious software might bring in. This means one
|
|
* could make a snapshot over all processes running and monitor
|
|
* /proc/pid/exe changes to notice unusual activity if needed.
|
|
*/
|
|
err = -EPERM;
|
|
if (test_and_set_bit(MMF_EXE_FILE_CHANGED, &mm->flags))
|
|
goto exit;
|
|
|
|
err = 0;
|
|
/* set the new file, lockless */
|
|
get_file(exe.file);
|
|
old_exe = xchg(&mm->exe_file, exe.file);
|
|
if (old_exe)
|
|
fput(old_exe);
|
|
exit:
|
|
fdput(exe);
|
|
return err;
|
|
exit_err:
|
|
up_read(&mm->mmap_sem);
|
|
fput(exe_file);
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* WARNING: we don't require any capability here so be very careful
|
|
* in what is allowed for modification from userspace.
|
|
*/
|
|
static int validate_prctl_map(struct prctl_mm_map *prctl_map)
|
|
{
|
|
unsigned long mmap_max_addr = TASK_SIZE;
|
|
struct mm_struct *mm = current->mm;
|
|
int error = -EINVAL, i;
|
|
|
|
static const unsigned char offsets[] = {
|
|
offsetof(struct prctl_mm_map, start_code),
|
|
offsetof(struct prctl_mm_map, end_code),
|
|
offsetof(struct prctl_mm_map, start_data),
|
|
offsetof(struct prctl_mm_map, end_data),
|
|
offsetof(struct prctl_mm_map, start_brk),
|
|
offsetof(struct prctl_mm_map, brk),
|
|
offsetof(struct prctl_mm_map, start_stack),
|
|
offsetof(struct prctl_mm_map, arg_start),
|
|
offsetof(struct prctl_mm_map, arg_end),
|
|
offsetof(struct prctl_mm_map, env_start),
|
|
offsetof(struct prctl_mm_map, env_end),
|
|
};
|
|
|
|
/*
|
|
* Make sure the members are not somewhere outside
|
|
* of allowed address space.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(offsets); i++) {
|
|
u64 val = *(u64 *)((char *)prctl_map + offsets[i]);
|
|
|
|
if ((unsigned long)val >= mmap_max_addr ||
|
|
(unsigned long)val < mmap_min_addr)
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Make sure the pairs are ordered.
|
|
*/
|
|
#define __prctl_check_order(__m1, __op, __m2) \
|
|
((unsigned long)prctl_map->__m1 __op \
|
|
(unsigned long)prctl_map->__m2) ? 0 : -EINVAL
|
|
error = __prctl_check_order(start_code, <, end_code);
|
|
error |= __prctl_check_order(start_data, <, end_data);
|
|
error |= __prctl_check_order(start_brk, <=, brk);
|
|
error |= __prctl_check_order(arg_start, <=, arg_end);
|
|
error |= __prctl_check_order(env_start, <=, env_end);
|
|
if (error)
|
|
goto out;
|
|
#undef __prctl_check_order
|
|
|
|
error = -EINVAL;
|
|
|
|
/*
|
|
* @brk should be after @end_data in traditional maps.
|
|
*/
|
|
if (prctl_map->start_brk <= prctl_map->end_data ||
|
|
prctl_map->brk <= prctl_map->end_data)
|
|
goto out;
|
|
|
|
/*
|
|
* Neither we should allow to override limits if they set.
|
|
*/
|
|
if (check_data_rlimit(rlimit(RLIMIT_DATA), prctl_map->brk,
|
|
prctl_map->start_brk, prctl_map->end_data,
|
|
prctl_map->start_data))
|
|
goto out;
|
|
|
|
/*
|
|
* Someone is trying to cheat the auxv vector.
|
|
*/
|
|
if (prctl_map->auxv_size) {
|
|
if (!prctl_map->auxv || prctl_map->auxv_size > sizeof(mm->saved_auxv))
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Finally, make sure the caller has the rights to
|
|
* change /proc/pid/exe link: only local root should
|
|
* be allowed to.
|
|
*/
|
|
if (prctl_map->exe_fd != (u32)-1) {
|
|
struct user_namespace *ns = current_user_ns();
|
|
const struct cred *cred = current_cred();
|
|
|
|
if (!uid_eq(cred->uid, make_kuid(ns, 0)) ||
|
|
!gid_eq(cred->gid, make_kgid(ns, 0)))
|
|
goto out;
|
|
}
|
|
|
|
error = 0;
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
#ifdef CONFIG_CHECKPOINT_RESTORE
|
|
static int prctl_set_mm_map(int opt, const void __user *addr, unsigned long data_size)
|
|
{
|
|
struct prctl_mm_map prctl_map = { .exe_fd = (u32)-1, };
|
|
unsigned long user_auxv[AT_VECTOR_SIZE];
|
|
struct mm_struct *mm = current->mm;
|
|
int error;
|
|
|
|
BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
|
|
BUILD_BUG_ON(sizeof(struct prctl_mm_map) > 256);
|
|
|
|
if (opt == PR_SET_MM_MAP_SIZE)
|
|
return put_user((unsigned int)sizeof(prctl_map),
|
|
(unsigned int __user *)addr);
|
|
|
|
if (data_size != sizeof(prctl_map))
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(&prctl_map, addr, sizeof(prctl_map)))
|
|
return -EFAULT;
|
|
|
|
error = validate_prctl_map(&prctl_map);
|
|
if (error)
|
|
return error;
|
|
|
|
if (prctl_map.auxv_size) {
|
|
memset(user_auxv, 0, sizeof(user_auxv));
|
|
if (copy_from_user(user_auxv,
|
|
(const void __user *)prctl_map.auxv,
|
|
prctl_map.auxv_size))
|
|
return -EFAULT;
|
|
|
|
/* Last entry must be AT_NULL as specification requires */
|
|
user_auxv[AT_VECTOR_SIZE - 2] = AT_NULL;
|
|
user_auxv[AT_VECTOR_SIZE - 1] = AT_NULL;
|
|
}
|
|
|
|
if (prctl_map.exe_fd != (u32)-1)
|
|
error = prctl_set_mm_exe_file(mm, prctl_map.exe_fd);
|
|
down_read(&mm->mmap_sem);
|
|
if (error)
|
|
goto out;
|
|
|
|
/*
|
|
* We don't validate if these members are pointing to
|
|
* real present VMAs because application may have correspond
|
|
* VMAs already unmapped and kernel uses these members for statistics
|
|
* output in procfs mostly, except
|
|
*
|
|
* - @start_brk/@brk which are used in do_brk but kernel lookups
|
|
* for VMAs when updating these memvers so anything wrong written
|
|
* here cause kernel to swear at userspace program but won't lead
|
|
* to any problem in kernel itself
|
|
*/
|
|
|
|
mm->start_code = prctl_map.start_code;
|
|
mm->end_code = prctl_map.end_code;
|
|
mm->start_data = prctl_map.start_data;
|
|
mm->end_data = prctl_map.end_data;
|
|
mm->start_brk = prctl_map.start_brk;
|
|
mm->brk = prctl_map.brk;
|
|
mm->start_stack = prctl_map.start_stack;
|
|
mm->arg_start = prctl_map.arg_start;
|
|
mm->arg_end = prctl_map.arg_end;
|
|
mm->env_start = prctl_map.env_start;
|
|
mm->env_end = prctl_map.env_end;
|
|
|
|
/*
|
|
* Note this update of @saved_auxv is lockless thus
|
|
* if someone reads this member in procfs while we're
|
|
* updating -- it may get partly updated results. It's
|
|
* known and acceptable trade off: we leave it as is to
|
|
* not introduce additional locks here making the kernel
|
|
* more complex.
|
|
*/
|
|
if (prctl_map.auxv_size)
|
|
memcpy(mm->saved_auxv, user_auxv, sizeof(user_auxv));
|
|
|
|
error = 0;
|
|
out:
|
|
up_read(&mm->mmap_sem);
|
|
return error;
|
|
}
|
|
#endif /* CONFIG_CHECKPOINT_RESTORE */
|
|
|
|
static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
|
|
unsigned long len)
|
|
{
|
|
/*
|
|
* This doesn't move the auxiliary vector itself since it's pinned to
|
|
* mm_struct, but it permits filling the vector with new values. It's
|
|
* up to the caller to provide sane values here, otherwise userspace
|
|
* tools which use this vector might be unhappy.
|
|
*/
|
|
unsigned long user_auxv[AT_VECTOR_SIZE];
|
|
|
|
if (len > sizeof(user_auxv))
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(user_auxv, (const void __user *)addr, len))
|
|
return -EFAULT;
|
|
|
|
/* Make sure the last entry is always AT_NULL */
|
|
user_auxv[AT_VECTOR_SIZE - 2] = 0;
|
|
user_auxv[AT_VECTOR_SIZE - 1] = 0;
|
|
|
|
BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
|
|
|
|
task_lock(current);
|
|
memcpy(mm->saved_auxv, user_auxv, len);
|
|
task_unlock(current);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prctl_set_mm(int opt, unsigned long addr,
|
|
unsigned long arg4, unsigned long arg5)
|
|
{
|
|
struct mm_struct *mm = current->mm;
|
|
struct prctl_mm_map prctl_map;
|
|
struct vm_area_struct *vma;
|
|
int error;
|
|
|
|
if (arg5 || (arg4 && (opt != PR_SET_MM_AUXV &&
|
|
opt != PR_SET_MM_MAP &&
|
|
opt != PR_SET_MM_MAP_SIZE)))
|
|
return -EINVAL;
|
|
|
|
#ifdef CONFIG_CHECKPOINT_RESTORE
|
|
if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
|
|
return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
|
|
#endif
|
|
|
|
if (!capable(CAP_SYS_RESOURCE))
|
|
return -EPERM;
|
|
|
|
if (opt == PR_SET_MM_EXE_FILE)
|
|
return prctl_set_mm_exe_file(mm, (unsigned int)addr);
|
|
|
|
if (opt == PR_SET_MM_AUXV)
|
|
return prctl_set_auxv(mm, addr, arg4);
|
|
|
|
if (addr >= TASK_SIZE || addr < mmap_min_addr)
|
|
return -EINVAL;
|
|
|
|
error = -EINVAL;
|
|
|
|
down_read(&mm->mmap_sem);
|
|
vma = find_vma(mm, addr);
|
|
|
|
prctl_map.start_code = mm->start_code;
|
|
prctl_map.end_code = mm->end_code;
|
|
prctl_map.start_data = mm->start_data;
|
|
prctl_map.end_data = mm->end_data;
|
|
prctl_map.start_brk = mm->start_brk;
|
|
prctl_map.brk = mm->brk;
|
|
prctl_map.start_stack = mm->start_stack;
|
|
prctl_map.arg_start = mm->arg_start;
|
|
prctl_map.arg_end = mm->arg_end;
|
|
prctl_map.env_start = mm->env_start;
|
|
prctl_map.env_end = mm->env_end;
|
|
prctl_map.auxv = NULL;
|
|
prctl_map.auxv_size = 0;
|
|
prctl_map.exe_fd = -1;
|
|
|
|
switch (opt) {
|
|
case PR_SET_MM_START_CODE:
|
|
prctl_map.start_code = addr;
|
|
break;
|
|
case PR_SET_MM_END_CODE:
|
|
prctl_map.end_code = addr;
|
|
break;
|
|
case PR_SET_MM_START_DATA:
|
|
prctl_map.start_data = addr;
|
|
break;
|
|
case PR_SET_MM_END_DATA:
|
|
prctl_map.end_data = addr;
|
|
break;
|
|
case PR_SET_MM_START_STACK:
|
|
prctl_map.start_stack = addr;
|
|
break;
|
|
case PR_SET_MM_START_BRK:
|
|
prctl_map.start_brk = addr;
|
|
break;
|
|
case PR_SET_MM_BRK:
|
|
prctl_map.brk = addr;
|
|
break;
|
|
case PR_SET_MM_ARG_START:
|
|
prctl_map.arg_start = addr;
|
|
break;
|
|
case PR_SET_MM_ARG_END:
|
|
prctl_map.arg_end = addr;
|
|
break;
|
|
case PR_SET_MM_ENV_START:
|
|
prctl_map.env_start = addr;
|
|
break;
|
|
case PR_SET_MM_ENV_END:
|
|
prctl_map.env_end = addr;
|
|
break;
|
|
default:
|
|
goto out;
|
|
}
|
|
|
|
error = validate_prctl_map(&prctl_map);
|
|
if (error)
|
|
goto out;
|
|
|
|
switch (opt) {
|
|
/*
|
|
* If command line arguments and environment
|
|
* are placed somewhere else on stack, we can
|
|
* set them up here, ARG_START/END to setup
|
|
* command line argumets and ENV_START/END
|
|
* for environment.
|
|
*/
|
|
case PR_SET_MM_START_STACK:
|
|
case PR_SET_MM_ARG_START:
|
|
case PR_SET_MM_ARG_END:
|
|
case PR_SET_MM_ENV_START:
|
|
case PR_SET_MM_ENV_END:
|
|
if (!vma) {
|
|
error = -EFAULT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
mm->start_code = prctl_map.start_code;
|
|
mm->end_code = prctl_map.end_code;
|
|
mm->start_data = prctl_map.start_data;
|
|
mm->end_data = prctl_map.end_data;
|
|
mm->start_brk = prctl_map.start_brk;
|
|
mm->brk = prctl_map.brk;
|
|
mm->start_stack = prctl_map.start_stack;
|
|
mm->arg_start = prctl_map.arg_start;
|
|
mm->arg_end = prctl_map.arg_end;
|
|
mm->env_start = prctl_map.env_start;
|
|
mm->env_end = prctl_map.env_end;
|
|
|
|
error = 0;
|
|
out:
|
|
up_read(&mm->mmap_sem);
|
|
return error;
|
|
}
|
|
|
|
#ifdef CONFIG_CHECKPOINT_RESTORE
|
|
static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
|
|
{
|
|
return put_user(me->clear_child_tid, tid_addr);
|
|
}
|
|
#else
|
|
static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
|
|
unsigned long, arg4, unsigned long, arg5)
|
|
{
|
|
struct task_struct *me = current;
|
|
unsigned char comm[sizeof(me->comm)];
|
|
long error;
|
|
|
|
error = security_task_prctl(option, arg2, arg3, arg4, arg5);
|
|
if (error != -ENOSYS)
|
|
return error;
|
|
|
|
error = 0;
|
|
switch (option) {
|
|
case PR_SET_PDEATHSIG:
|
|
if (!valid_signal(arg2)) {
|
|
error = -EINVAL;
|
|
break;
|
|
}
|
|
me->pdeath_signal = arg2;
|
|
break;
|
|
case PR_GET_PDEATHSIG:
|
|
error = put_user(me->pdeath_signal, (int __user *)arg2);
|
|
break;
|
|
case PR_GET_DUMPABLE:
|
|
error = get_dumpable(me->mm);
|
|
break;
|
|
case PR_SET_DUMPABLE:
|
|
if (arg2 != SUID_DUMP_DISABLE && arg2 != SUID_DUMP_USER) {
|
|
error = -EINVAL;
|
|
break;
|
|
}
|
|
set_dumpable(me->mm, arg2);
|
|
break;
|
|
|
|
case PR_SET_UNALIGN:
|
|
error = SET_UNALIGN_CTL(me, arg2);
|
|
break;
|
|
case PR_GET_UNALIGN:
|
|
error = GET_UNALIGN_CTL(me, arg2);
|
|
break;
|
|
case PR_SET_FPEMU:
|
|
error = SET_FPEMU_CTL(me, arg2);
|
|
break;
|
|
case PR_GET_FPEMU:
|
|
error = GET_FPEMU_CTL(me, arg2);
|
|
break;
|
|
case PR_SET_FPEXC:
|
|
error = SET_FPEXC_CTL(me, arg2);
|
|
break;
|
|
case PR_GET_FPEXC:
|
|
error = GET_FPEXC_CTL(me, arg2);
|
|
break;
|
|
case PR_GET_TIMING:
|
|
error = PR_TIMING_STATISTICAL;
|
|
break;
|
|
case PR_SET_TIMING:
|
|
if (arg2 != PR_TIMING_STATISTICAL)
|
|
error = -EINVAL;
|
|
break;
|
|
case PR_SET_NAME:
|
|
comm[sizeof(me->comm) - 1] = 0;
|
|
if (strncpy_from_user(comm, (char __user *)arg2,
|
|
sizeof(me->comm) - 1) < 0)
|
|
return -EFAULT;
|
|
set_task_comm(me, comm);
|
|
proc_comm_connector(me);
|
|
break;
|
|
case PR_GET_NAME:
|
|
get_task_comm(comm, me);
|
|
if (copy_to_user((char __user *)arg2, comm, sizeof(comm)))
|
|
return -EFAULT;
|
|
break;
|
|
case PR_GET_ENDIAN:
|
|
error = GET_ENDIAN(me, arg2);
|
|
break;
|
|
case PR_SET_ENDIAN:
|
|
error = SET_ENDIAN(me, arg2);
|
|
break;
|
|
case PR_GET_SECCOMP:
|
|
error = prctl_get_seccomp();
|
|
break;
|
|
case PR_SET_SECCOMP:
|
|
error = prctl_set_seccomp(arg2, (char __user *)arg3);
|
|
break;
|
|
case PR_GET_TSC:
|
|
error = GET_TSC_CTL(arg2);
|
|
break;
|
|
case PR_SET_TSC:
|
|
error = SET_TSC_CTL(arg2);
|
|
break;
|
|
case PR_TASK_PERF_EVENTS_DISABLE:
|
|
error = perf_event_task_disable();
|
|
break;
|
|
case PR_TASK_PERF_EVENTS_ENABLE:
|
|
error = perf_event_task_enable();
|
|
break;
|
|
case PR_GET_TIMERSLACK:
|
|
error = current->timer_slack_ns;
|
|
break;
|
|
case PR_SET_TIMERSLACK:
|
|
if (arg2 <= 0)
|
|
current->timer_slack_ns =
|
|
current->default_timer_slack_ns;
|
|
else
|
|
current->timer_slack_ns = arg2;
|
|
break;
|
|
case PR_MCE_KILL:
|
|
if (arg4 | arg5)
|
|
return -EINVAL;
|
|
switch (arg2) {
|
|
case PR_MCE_KILL_CLEAR:
|
|
if (arg3 != 0)
|
|
return -EINVAL;
|
|
current->flags &= ~PF_MCE_PROCESS;
|
|
break;
|
|
case PR_MCE_KILL_SET:
|
|
current->flags |= PF_MCE_PROCESS;
|
|
if (arg3 == PR_MCE_KILL_EARLY)
|
|
current->flags |= PF_MCE_EARLY;
|
|
else if (arg3 == PR_MCE_KILL_LATE)
|
|
current->flags &= ~PF_MCE_EARLY;
|
|
else if (arg3 == PR_MCE_KILL_DEFAULT)
|
|
current->flags &=
|
|
~(PF_MCE_EARLY|PF_MCE_PROCESS);
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case PR_MCE_KILL_GET:
|
|
if (arg2 | arg3 | arg4 | arg5)
|
|
return -EINVAL;
|
|
if (current->flags & PF_MCE_PROCESS)
|
|
error = (current->flags & PF_MCE_EARLY) ?
|
|
PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
|
|
else
|
|
error = PR_MCE_KILL_DEFAULT;
|
|
break;
|
|
case PR_SET_MM:
|
|
error = prctl_set_mm(arg2, arg3, arg4, arg5);
|
|
break;
|
|
case PR_GET_TID_ADDRESS:
|
|
error = prctl_get_tid_address(me, (int __user **)arg2);
|
|
break;
|
|
case PR_SET_CHILD_SUBREAPER:
|
|
me->signal->is_child_subreaper = !!arg2;
|
|
break;
|
|
case PR_GET_CHILD_SUBREAPER:
|
|
error = put_user(me->signal->is_child_subreaper,
|
|
(int __user *)arg2);
|
|
break;
|
|
case PR_SET_NO_NEW_PRIVS:
|
|
if (arg2 != 1 || arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
|
|
task_set_no_new_privs(current);
|
|
break;
|
|
case PR_GET_NO_NEW_PRIVS:
|
|
if (arg2 || arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
return task_no_new_privs(current) ? 1 : 0;
|
|
case PR_GET_THP_DISABLE:
|
|
if (arg2 || arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
error = !!(me->mm->def_flags & VM_NOHUGEPAGE);
|
|
break;
|
|
case PR_SET_THP_DISABLE:
|
|
if (arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
down_write(&me->mm->mmap_sem);
|
|
if (arg2)
|
|
me->mm->def_flags |= VM_NOHUGEPAGE;
|
|
else
|
|
me->mm->def_flags &= ~VM_NOHUGEPAGE;
|
|
up_write(&me->mm->mmap_sem);
|
|
break;
|
|
case PR_MPX_ENABLE_MANAGEMENT:
|
|
if (arg2 || arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
error = MPX_ENABLE_MANAGEMENT();
|
|
break;
|
|
case PR_MPX_DISABLE_MANAGEMENT:
|
|
if (arg2 || arg3 || arg4 || arg5)
|
|
return -EINVAL;
|
|
error = MPX_DISABLE_MANAGEMENT();
|
|
break;
|
|
case PR_SET_FP_MODE:
|
|
error = SET_FP_MODE(me, arg2);
|
|
break;
|
|
case PR_GET_FP_MODE:
|
|
error = GET_FP_MODE(me);
|
|
break;
|
|
default:
|
|
error = -EINVAL;
|
|
break;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
|
|
struct getcpu_cache __user *, unused)
|
|
{
|
|
int err = 0;
|
|
int cpu = raw_smp_processor_id();
|
|
|
|
if (cpup)
|
|
err |= put_user(cpu, cpup);
|
|
if (nodep)
|
|
err |= put_user(cpu_to_node(cpu), nodep);
|
|
return err ? -EFAULT : 0;
|
|
}
|
|
|
|
/**
|
|
* do_sysinfo - fill in sysinfo struct
|
|
* @info: pointer to buffer to fill
|
|
*/
|
|
static int do_sysinfo(struct sysinfo *info)
|
|
{
|
|
unsigned long mem_total, sav_total;
|
|
unsigned int mem_unit, bitcount;
|
|
struct timespec tp;
|
|
|
|
memset(info, 0, sizeof(struct sysinfo));
|
|
|
|
get_monotonic_boottime(&tp);
|
|
info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
|
|
|
|
get_avenrun(info->loads, 0, SI_LOAD_SHIFT - FSHIFT);
|
|
|
|
info->procs = nr_threads;
|
|
|
|
si_meminfo(info);
|
|
si_swapinfo(info);
|
|
|
|
/*
|
|
* If the sum of all the available memory (i.e. ram + swap)
|
|
* is less than can be stored in a 32 bit unsigned long then
|
|
* we can be binary compatible with 2.2.x kernels. If not,
|
|
* well, in that case 2.2.x was broken anyways...
|
|
*
|
|
* -Erik Andersen <andersee@debian.org>
|
|
*/
|
|
|
|
mem_total = info->totalram + info->totalswap;
|
|
if (mem_total < info->totalram || mem_total < info->totalswap)
|
|
goto out;
|
|
bitcount = 0;
|
|
mem_unit = info->mem_unit;
|
|
while (mem_unit > 1) {
|
|
bitcount++;
|
|
mem_unit >>= 1;
|
|
sav_total = mem_total;
|
|
mem_total <<= 1;
|
|
if (mem_total < sav_total)
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* If mem_total did not overflow, multiply all memory values by
|
|
* info->mem_unit and set it to 1. This leaves things compatible
|
|
* with 2.2.x, and also retains compatibility with earlier 2.4.x
|
|
* kernels...
|
|
*/
|
|
|
|
info->mem_unit = 1;
|
|
info->totalram <<= bitcount;
|
|
info->freeram <<= bitcount;
|
|
info->sharedram <<= bitcount;
|
|
info->bufferram <<= bitcount;
|
|
info->totalswap <<= bitcount;
|
|
info->freeswap <<= bitcount;
|
|
info->totalhigh <<= bitcount;
|
|
info->freehigh <<= bitcount;
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
|
|
{
|
|
struct sysinfo val;
|
|
|
|
do_sysinfo(&val);
|
|
|
|
if (copy_to_user(info, &val, sizeof(struct sysinfo)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
struct compat_sysinfo {
|
|
s32 uptime;
|
|
u32 loads[3];
|
|
u32 totalram;
|
|
u32 freeram;
|
|
u32 sharedram;
|
|
u32 bufferram;
|
|
u32 totalswap;
|
|
u32 freeswap;
|
|
u16 procs;
|
|
u16 pad;
|
|
u32 totalhigh;
|
|
u32 freehigh;
|
|
u32 mem_unit;
|
|
char _f[20-2*sizeof(u32)-sizeof(int)];
|
|
};
|
|
|
|
COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info)
|
|
{
|
|
struct sysinfo s;
|
|
|
|
do_sysinfo(&s);
|
|
|
|
/* Check to see if any memory value is too large for 32-bit and scale
|
|
* down if needed
|
|
*/
|
|
if (upper_32_bits(s.totalram) || upper_32_bits(s.totalswap)) {
|
|
int bitcount = 0;
|
|
|
|
while (s.mem_unit < PAGE_SIZE) {
|
|
s.mem_unit <<= 1;
|
|
bitcount++;
|
|
}
|
|
|
|
s.totalram >>= bitcount;
|
|
s.freeram >>= bitcount;
|
|
s.sharedram >>= bitcount;
|
|
s.bufferram >>= bitcount;
|
|
s.totalswap >>= bitcount;
|
|
s.freeswap >>= bitcount;
|
|
s.totalhigh >>= bitcount;
|
|
s.freehigh >>= bitcount;
|
|
}
|
|
|
|
if (!access_ok(VERIFY_WRITE, info, sizeof(struct compat_sysinfo)) ||
|
|
__put_user(s.uptime, &info->uptime) ||
|
|
__put_user(s.loads[0], &info->loads[0]) ||
|
|
__put_user(s.loads[1], &info->loads[1]) ||
|
|
__put_user(s.loads[2], &info->loads[2]) ||
|
|
__put_user(s.totalram, &info->totalram) ||
|
|
__put_user(s.freeram, &info->freeram) ||
|
|
__put_user(s.sharedram, &info->sharedram) ||
|
|
__put_user(s.bufferram, &info->bufferram) ||
|
|
__put_user(s.totalswap, &info->totalswap) ||
|
|
__put_user(s.freeswap, &info->freeswap) ||
|
|
__put_user(s.procs, &info->procs) ||
|
|
__put_user(s.totalhigh, &info->totalhigh) ||
|
|
__put_user(s.freehigh, &info->freehigh) ||
|
|
__put_user(s.mem_unit, &info->mem_unit))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_COMPAT */
|