mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 16:41:58 +00:00
5369bea7d7
The hardware supports transfers up to a page boundary per buffer. Currently, we work around that in the DMA code by splitting each buffer up as we run through the scatterlist. Avoid this by telling the block layers about the hardware restriction. Eventually, this will allow us to phase out the splitting code, but not until the old IDE layer allows us to control the value it gives to blk_queue_segment_boundary(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
463 lines
12 KiB
C
463 lines
12 KiB
C
/*
|
|
* linux/drivers/acorn/scsi/powertec.c
|
|
*
|
|
* Copyright (C) 1997-2005 Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/ecard.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include "../scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "fas216.h"
|
|
#include "scsi.h"
|
|
|
|
#include <scsi/scsicam.h>
|
|
|
|
#define POWERTEC_FAS216_OFFSET 0x3000
|
|
#define POWERTEC_FAS216_SHIFT 6
|
|
|
|
#define POWERTEC_INTR_STATUS 0x2000
|
|
#define POWERTEC_INTR_BIT 0x80
|
|
|
|
#define POWERTEC_RESET_CONTROL 0x1018
|
|
#define POWERTEC_RESET_BIT 1
|
|
|
|
#define POWERTEC_TERM_CONTROL 0x2018
|
|
#define POWERTEC_TERM_ENABLE 1
|
|
|
|
#define POWERTEC_INTR_CONTROL 0x101c
|
|
#define POWERTEC_INTR_ENABLE 1
|
|
#define POWERTEC_INTR_DISABLE 0
|
|
|
|
#define VERSION "1.10 (19/01/2003 2.5.59)"
|
|
|
|
/*
|
|
* Use term=0,1,0,0,0 to turn terminators on/off.
|
|
* One entry per slot.
|
|
*/
|
|
static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
|
|
|
|
#define NR_SG 256
|
|
|
|
struct powertec_info {
|
|
FAS216_Info info;
|
|
struct expansion_card *ec;
|
|
void __iomem *base;
|
|
unsigned int term_ctl;
|
|
struct scatterlist sg[NR_SG];
|
|
};
|
|
|
|
/* Prototype: void powertecscsi_irqenable(ec, irqnr)
|
|
* Purpose : Enable interrupts on Powertec SCSI card
|
|
* Params : ec - expansion card structure
|
|
* : irqnr - interrupt number
|
|
*/
|
|
static void
|
|
powertecscsi_irqenable(struct expansion_card *ec, int irqnr)
|
|
{
|
|
struct powertec_info *info = ec->irq_data;
|
|
writeb(POWERTEC_INTR_ENABLE, info->base + POWERTEC_INTR_CONTROL);
|
|
}
|
|
|
|
/* Prototype: void powertecscsi_irqdisable(ec, irqnr)
|
|
* Purpose : Disable interrupts on Powertec SCSI card
|
|
* Params : ec - expansion card structure
|
|
* : irqnr - interrupt number
|
|
*/
|
|
static void
|
|
powertecscsi_irqdisable(struct expansion_card *ec, int irqnr)
|
|
{
|
|
struct powertec_info *info = ec->irq_data;
|
|
writeb(POWERTEC_INTR_DISABLE, info->base + POWERTEC_INTR_CONTROL);
|
|
}
|
|
|
|
static const expansioncard_ops_t powertecscsi_ops = {
|
|
.irqenable = powertecscsi_irqenable,
|
|
.irqdisable = powertecscsi_irqdisable,
|
|
};
|
|
|
|
/* Prototype: void powertecscsi_terminator_ctl(host, on_off)
|
|
* Purpose : Turn the Powertec SCSI terminators on or off
|
|
* Params : host - card to turn on/off
|
|
* : on_off - !0 to turn on, 0 to turn off
|
|
*/
|
|
static void
|
|
powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
|
|
{
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
|
|
info->term_ctl = on_off ? POWERTEC_TERM_ENABLE : 0;
|
|
writeb(info->term_ctl, info->base + POWERTEC_TERM_CONTROL);
|
|
}
|
|
|
|
/* Prototype: void powertecscsi_intr(irq, *dev_id, *regs)
|
|
* Purpose : handle interrupts from Powertec SCSI card
|
|
* Params : irq - interrupt number
|
|
* dev_id - user-defined (Scsi_Host structure)
|
|
*/
|
|
static irqreturn_t powertecscsi_intr(int irq, void *dev_id)
|
|
{
|
|
struct powertec_info *info = dev_id;
|
|
|
|
return fas216_intr(&info->info);
|
|
}
|
|
|
|
/* Prototype: fasdmatype_t powertecscsi_dma_setup(host, SCpnt, direction, min_type)
|
|
* Purpose : initialises DMA/PIO
|
|
* Params : host - host
|
|
* SCpnt - command
|
|
* direction - DMA on to/off of card
|
|
* min_type - minimum DMA support that we must have for this transfer
|
|
* Returns : type of transfer to be performed
|
|
*/
|
|
static fasdmatype_t
|
|
powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
|
|
fasdmadir_t direction, fasdmatype_t min_type)
|
|
{
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
struct device *dev = scsi_get_device(host);
|
|
int dmach = info->info.scsi.dma;
|
|
|
|
if (info->info.ifcfg.capabilities & FASCAP_DMA &&
|
|
min_type == fasdma_real_all) {
|
|
int bufs, map_dir, dma_dir;
|
|
|
|
bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG);
|
|
|
|
if (direction == DMA_OUT)
|
|
map_dir = DMA_TO_DEVICE,
|
|
dma_dir = DMA_MODE_WRITE;
|
|
else
|
|
map_dir = DMA_FROM_DEVICE,
|
|
dma_dir = DMA_MODE_READ;
|
|
|
|
dma_map_sg(dev, info->sg, bufs, map_dir);
|
|
|
|
disable_dma(dmach);
|
|
set_dma_sg(dmach, info->sg, bufs);
|
|
set_dma_mode(dmach, dma_dir);
|
|
enable_dma(dmach);
|
|
return fasdma_real_all;
|
|
}
|
|
|
|
/*
|
|
* If we're not doing DMA,
|
|
* we'll do slow PIO
|
|
*/
|
|
return fasdma_pio;
|
|
}
|
|
|
|
/* Prototype: int powertecscsi_dma_stop(host, SCpnt)
|
|
* Purpose : stops DMA/PIO
|
|
* Params : host - host
|
|
* SCpnt - command
|
|
*/
|
|
static void
|
|
powertecscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
|
|
{
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
if (info->info.scsi.dma != NO_DMA)
|
|
disable_dma(info->info.scsi.dma);
|
|
}
|
|
|
|
/* Prototype: const char *powertecscsi_info(struct Scsi_Host * host)
|
|
* Purpose : returns a descriptive string about this interface,
|
|
* Params : host - driver host structure to return info for.
|
|
* Returns : pointer to a static buffer containing null terminated string.
|
|
*/
|
|
const char *powertecscsi_info(struct Scsi_Host *host)
|
|
{
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
static char string[150];
|
|
|
|
sprintf(string, "%s (%s) in slot %d v%s terminators o%s",
|
|
host->hostt->name, info->info.scsi.type, info->ec->slot_no,
|
|
VERSION, info->term_ctl ? "n" : "ff");
|
|
|
|
return string;
|
|
}
|
|
|
|
/* Prototype: int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
|
|
* Purpose : Set a driver specific function
|
|
* Params : host - host to setup
|
|
* : buffer - buffer containing string describing operation
|
|
* : length - length of string
|
|
* Returns : -EINVAL, or 0
|
|
*/
|
|
static int
|
|
powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
|
|
{
|
|
int ret = length;
|
|
|
|
if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) {
|
|
buffer += 12;
|
|
length -= 12;
|
|
|
|
if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
|
|
if (buffer[5] == '1')
|
|
powertecscsi_terminator_ctl(host, 1);
|
|
else if (buffer[5] == '0')
|
|
powertecscsi_terminator_ctl(host, 0);
|
|
else
|
|
ret = -EINVAL;
|
|
} else
|
|
ret = -EINVAL;
|
|
} else
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Prototype: int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
|
|
* int length, int host_no, int inout)
|
|
* Purpose : Return information about the driver to a user process accessing
|
|
* the /proc filesystem.
|
|
* Params : buffer - a buffer to write information to
|
|
* start - a pointer into this buffer set by this routine to the start
|
|
* of the required information.
|
|
* offset - offset into information that we have read upto.
|
|
* length - length of buffer
|
|
* inout - 0 for reading, 1 for writing.
|
|
* Returns : length of data written to buffer.
|
|
*/
|
|
int powertecscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
|
|
int length, int inout)
|
|
{
|
|
struct powertec_info *info;
|
|
char *p = buffer;
|
|
int pos;
|
|
|
|
if (inout == 1)
|
|
return powertecscsi_set_proc_info(host, buffer, length);
|
|
|
|
info = (struct powertec_info *)host->hostdata;
|
|
|
|
p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION);
|
|
p += fas216_print_host(&info->info, p);
|
|
p += sprintf(p, "Term : o%s\n",
|
|
info->term_ctl ? "n" : "ff");
|
|
|
|
p += fas216_print_stats(&info->info, p);
|
|
p += fas216_print_devices(&info->info, p);
|
|
|
|
*start = buffer + offset;
|
|
pos = p - buffer - offset;
|
|
if (pos > length)
|
|
pos = length;
|
|
|
|
return pos;
|
|
}
|
|
|
|
static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
struct Scsi_Host *host = ecard_get_drvdata(ec);
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
|
|
return sprintf(buf, "%d\n", info->term_ctl ? 1 : 0);
|
|
}
|
|
|
|
static ssize_t
|
|
powertecscsi_store_term(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
|
|
{
|
|
struct expansion_card *ec = ECARD_DEV(dev);
|
|
struct Scsi_Host *host = ecard_get_drvdata(ec);
|
|
|
|
if (len > 1)
|
|
powertecscsi_terminator_ctl(host, buf[0] != '0');
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
|
|
powertecscsi_show_term, powertecscsi_store_term);
|
|
|
|
static struct scsi_host_template powertecscsi_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_info = powertecscsi_proc_info,
|
|
.name = "PowerTec SCSI",
|
|
.info = powertecscsi_info,
|
|
.queuecommand = fas216_queue_command,
|
|
.eh_host_reset_handler = fas216_eh_host_reset,
|
|
.eh_bus_reset_handler = fas216_eh_bus_reset,
|
|
.eh_device_reset_handler = fas216_eh_device_reset,
|
|
.eh_abort_handler = fas216_eh_abort,
|
|
|
|
.can_queue = 8,
|
|
.this_id = 7,
|
|
.sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
|
|
.dma_boundary = IOMD_DMA_BOUNDARY,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.proc_name = "powertec",
|
|
};
|
|
|
|
static int __devinit
|
|
powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
|
|
{
|
|
struct Scsi_Host *host;
|
|
struct powertec_info *info;
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
ret = ecard_request_resources(ec);
|
|
if (ret)
|
|
goto out;
|
|
|
|
base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
|
|
if (!base) {
|
|
ret = -ENOMEM;
|
|
goto out_region;
|
|
}
|
|
|
|
host = scsi_host_alloc(&powertecscsi_template,
|
|
sizeof (struct powertec_info));
|
|
if (!host) {
|
|
ret = -ENOMEM;
|
|
goto out_region;
|
|
}
|
|
|
|
ecard_set_drvdata(ec, host);
|
|
|
|
info = (struct powertec_info *)host->hostdata;
|
|
info->base = base;
|
|
powertecscsi_terminator_ctl(host, term[ec->slot_no]);
|
|
|
|
info->ec = ec;
|
|
info->info.scsi.io_base = base + POWERTEC_FAS216_OFFSET;
|
|
info->info.scsi.io_shift = POWERTEC_FAS216_SHIFT;
|
|
info->info.scsi.irq = ec->irq;
|
|
info->info.scsi.dma = ec->dma;
|
|
info->info.ifcfg.clockrate = 40; /* MHz */
|
|
info->info.ifcfg.select_timeout = 255;
|
|
info->info.ifcfg.asyncperiod = 200; /* ns */
|
|
info->info.ifcfg.sync_max_depth = 7;
|
|
info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
|
|
info->info.ifcfg.disconnect_ok = 1;
|
|
info->info.ifcfg.wide_max_size = 0;
|
|
info->info.ifcfg.capabilities = 0;
|
|
info->info.dma.setup = powertecscsi_dma_setup;
|
|
info->info.dma.pseudo = NULL;
|
|
info->info.dma.stop = powertecscsi_dma_stop;
|
|
|
|
ec->irqaddr = base + POWERTEC_INTR_STATUS;
|
|
ec->irqmask = POWERTEC_INTR_BIT;
|
|
|
|
ecard_setirq(ec, &powertecscsi_ops, info);
|
|
|
|
device_create_file(&ec->dev, &dev_attr_bus_term);
|
|
|
|
ret = fas216_init(host);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
ret = request_irq(ec->irq, powertecscsi_intr,
|
|
IRQF_DISABLED, "powertec", info);
|
|
if (ret) {
|
|
printk("scsi%d: IRQ%d not free: %d\n",
|
|
host->host_no, ec->irq, ret);
|
|
goto out_release;
|
|
}
|
|
|
|
if (info->info.scsi.dma != NO_DMA) {
|
|
if (request_dma(info->info.scsi.dma, "powertec")) {
|
|
printk("scsi%d: DMA%d not free, using PIO\n",
|
|
host->host_no, info->info.scsi.dma);
|
|
info->info.scsi.dma = NO_DMA;
|
|
} else {
|
|
set_dma_speed(info->info.scsi.dma, 180);
|
|
info->info.ifcfg.capabilities |= FASCAP_DMA;
|
|
}
|
|
}
|
|
|
|
ret = fas216_add(host, &ec->dev);
|
|
if (ret == 0)
|
|
goto out;
|
|
|
|
if (info->info.scsi.dma != NO_DMA)
|
|
free_dma(info->info.scsi.dma);
|
|
free_irq(ec->irq, host);
|
|
|
|
out_release:
|
|
fas216_release(host);
|
|
|
|
out_free:
|
|
device_remove_file(&ec->dev, &dev_attr_bus_term);
|
|
scsi_host_put(host);
|
|
|
|
out_region:
|
|
ecard_release_resources(ec);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit powertecscsi_remove(struct expansion_card *ec)
|
|
{
|
|
struct Scsi_Host *host = ecard_get_drvdata(ec);
|
|
struct powertec_info *info = (struct powertec_info *)host->hostdata;
|
|
|
|
ecard_set_drvdata(ec, NULL);
|
|
fas216_remove(host);
|
|
|
|
device_remove_file(&ec->dev, &dev_attr_bus_term);
|
|
|
|
if (info->info.scsi.dma != NO_DMA)
|
|
free_dma(info->info.scsi.dma);
|
|
free_irq(ec->irq, info);
|
|
|
|
fas216_release(host);
|
|
scsi_host_put(host);
|
|
ecard_release_resources(ec);
|
|
}
|
|
|
|
static const struct ecard_id powertecscsi_cids[] = {
|
|
{ MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI },
|
|
{ 0xffff, 0xffff },
|
|
};
|
|
|
|
static struct ecard_driver powertecscsi_driver = {
|
|
.probe = powertecscsi_probe,
|
|
.remove = __devexit_p(powertecscsi_remove),
|
|
.id_table = powertecscsi_cids,
|
|
.drv = {
|
|
.name = "powertecscsi",
|
|
},
|
|
};
|
|
|
|
static int __init powertecscsi_init(void)
|
|
{
|
|
return ecard_register_driver(&powertecscsi_driver);
|
|
}
|
|
|
|
static void __exit powertecscsi_exit(void)
|
|
{
|
|
ecard_remove_driver(&powertecscsi_driver);
|
|
}
|
|
|
|
module_init(powertecscsi_init);
|
|
module_exit(powertecscsi_exit);
|
|
|
|
MODULE_AUTHOR("Russell King");
|
|
MODULE_DESCRIPTION("Powertec SCSI driver");
|
|
module_param_array(term, int, NULL, 0);
|
|
MODULE_PARM_DESC(term, "SCSI bus termination");
|
|
MODULE_LICENSE("GPL");
|