linux/arch/arm/Makefile
Al Viro 0b15569454 [PATCH] missing dependency on arm O= builds
arm maketools needs include/asm-arm in place in the build tree.
On normal builds it's always there, of course, but on O= it's created
(by generic code) too late - when we get to asm-offset.h.

	We used to get away with that by accident - creation of
include/asm-arm/arch symlink creates include/asm-arm and it happened
to go before maketools.  However, we did not have such dependency,
so that luck didn't last - now maketools is picked first and we are screwed.

	Both the symlink and maketools are prerequisites of the same
target (archprepare).  This fix is obvious - make the latter explicitly
depend on the former and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00

217 lines
7.5 KiB
Makefile

#
# arch/arm/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
#CFLAGS +=-pipe
# Do not use arch/arm/defconfig - it's always outdated.
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
ifeq ($(CONFIG_FRAME_POINTER),y)
CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
CPPFLAGS += -mbig-endian
AS += -EB
LD += -EB
else
CPPFLAGS += -mlittle-endian
AS += -EL
LD += -EL
endif
comma = ,
# This selects which instruction set is used.
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
# This selects how we optimise for the processor.
tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
tune-$(CONFIG_CPU_ARM710) :=-mtune=arm710
tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_V6) :=-mtune=strongarm
# Need -Uarm for gcc < 3.x
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
CHECKFLAGS += -D__arm__
#Default value
head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
textaddr-y := 0xC0008000
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_CLPS7500) := clps7500
incdir-$(CONFIG_ARCH_CLPS7500) := cl7500
machine-$(CONFIG_FOOTBRIDGE) := footbridge
incdir-$(CONFIG_FOOTBRIDGE) := ebsa285
textaddr-$(CONFIG_ARCH_CO285) := 0x60008000
machine-$(CONFIG_ARCH_CO285) := footbridge
incdir-$(CONFIG_ARCH_CO285) := ebsa285
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SA1100) := sa1100
ifeq ($(CONFIG_ARCH_SA1100),y)
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
textaddr-$(CONFIG_SA1111) := 0xc0208000
endif
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_CAMELOT) := epxa10db
textaddr-$(CONFIG_ARCH_CLPS711X) := 0xc0028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_OMAP1) := omap1
incdir-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
# PCMCIA cards stop working.
CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
export CFLAGS_3c589_cs.o
endif
TEXTADDR := $(textaddr-y)
ifeq ($(CONFIG_XIP_KERNEL),y)
DATAADDR := $(TEXTADDR)
xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
xipaddr-y ?= 0xbf000000
# Replace phys addr with virt addr while keeping offset from base.
TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
awk --non-decimal-data '/[:xdigit:]/ \
{ printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
endif
ifeq ($(incdir-y),)
incdir-y := $(machine-y)
endif
INCDIR := arch-$(incdir-y)
ifneq ($(machine-y),)
MACHINE := arch/arm/mach-$(machine-y)/
else
MACHINE :=
endif
export TEXTADDR DATAADDR GZFLAGS
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
FASTFPE_OBJ :=$(FASTFPE)/
endif
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += $(MACHINE)
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
# If we have a common platform directory, then include it in the build.
core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
libs-y += arch/arm/lib/
# Default target when executing plain make
ifeq ($(CONFIG_XIP_KERNEL),y)
all: xipImage
else
all: zImage
endif
boot := arch/arm/boot
# Update machine arch and proc symlinks if something which affects
# them changed. We use .arch to indicate when they were updated
# last, otherwise make uses the target directory mtime.
include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/MARKER
@echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm-arm
$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
else
$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
endif
@touch $@
archprepare: maketools
.PHONY: maketools FORCE
maketools: include/linux/version.h include/asm-arm/.arch FORCE
$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
# Convert bzImage to zImage
bzImage: zImage
zImage Image xipImage bootpImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
zinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
CLEAN_FILES += include/asm-arm/mach-types.h \
include/asm-arm/arch include/asm-arm/.arch
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# My testing targets (bypasses dependencies)
bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
define archhelp
echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
endef