linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
Yauhen Kharuzhy 95d6791b4f ARM: S3C24XX: Add address map and clock definitions for HSMMC0
Define maps for HSMMC devices.

S3C2443 has one HSMMC device with base address 0x4A800000.
S3C2416 has HSMMC0 at 0x4AC00000 and HSMMC1 at 0x4A800000.

So suppose that S3C2443 has only HSMMC1.

Define clock for hsmmc0 device and register it.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06 14:09:18 +09:00

473 lines
11 KiB
C

/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
*
* Copyright (c) 2007, 2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control suport - common code
*/
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
{
u32 ctrlbit = clk->ctrlbit;
u32 con = __raw_readl(reg);
if (enable)
con |= ctrlbit;
else
con &= ~ctrlbit;
__raw_writel(con, reg);
return 0;
}
int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
{
return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
}
int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
{
return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
}
int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
{
return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
}
/* mpllref is a direct descendant of clk_xtal by default, but it is not
* elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
* such directly equating the two source clocks is impossible.
*/
struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
.id = -1,
};
static struct clk *clk_epllref_sources[] = {
[0] = &clk_mpllref,
[1] = &clk_mpllref,
[2] = &clk_xtal,
[3] = &clk_ext,
};
struct clksrc_clk clk_epllref = {
.clk = {
.name = "epllref",
.id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_epllref_sources,
.nr_sources = ARRAY_SIZE(clk_epllref_sources),
},
.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
};
/* esysclk
*
* this is sourced from either the EPLL or the EPLLref clock
*/
static struct clk *clk_sysclk_sources[] = {
[0] = &clk_epllref.clk,
[1] = &clk_epll,
};
struct clksrc_clk clk_esysclk = {
.clk = {
.name = "esysclk",
.parent = &clk_epll,
.id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_sysclk_sources,
.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
},
.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
};
static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
unsigned long div = __raw_readl(S3C2443_CLKDIV0);
div &= S3C2443_CLKDIV0_EXTDIV_MASK;
div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
return parent_rate / (div + 1);
}
static struct clk clk_mdivclk = {
.name = "mdivclk",
.parent = &clk_mpllref,
.id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2443_getrate_mdivclk,
},
};
static struct clk *clk_msysclk_sources[] = {
[0] = &clk_mpllref,
[1] = &clk_mpll,
[2] = &clk_mdivclk,
[3] = &clk_mpllref,
};
struct clksrc_clk clk_msysclk = {
.clk = {
.name = "msysclk",
.parent = &clk_xtal,
.id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_msysclk_sources,
.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
},
.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
};
/* prediv
*
* this divides the msysclk down to pass to h/p/etc.
*/
static unsigned long s3c2443_prediv_getrate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
return rate / (clkdiv0 + 1);
}
static struct clk clk_prediv = {
.name = "prediv",
.id = -1,
.parent = &clk_msysclk.clk,
.ops = &(struct clk_ops) {
.get_rate = s3c2443_prediv_getrate,
},
};
/* usbhost
*
* usb host bus-clock, usually 48MHz to provide USB bus clock timing
*/
static struct clksrc_clk clk_usb_bus_host = {
.clk = {
.name = "usb-bus-host-parent",
.id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_USBHOST,
.enable = s3c2443_clkcon_enable_s,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* common clksrc clocks */
static struct clksrc_clk clksrc_clks[] = {
{
/* ART baud-rate clock sourced from esysclk via a divisor */
.clk = {
.name = "uartclk",
.id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
}, {
/* camera interface bus-clock, divided down from esysclk */
.clk = {
.name = "camif-upll", /* same as 2440 name */
.id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_CAMCLK,
.enable = s3c2443_clkcon_enable_s,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
}, {
.clk = {
.name = "display-if",
.id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_DISPCLK,
.enable = s3c2443_clkcon_enable_s,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
},
};
static struct clk init_clocks_off[] = {
{
.name = "adc",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_ADC,
}, {
.name = "i2c",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIC,
}
};
static struct clk init_clocks[] = {
{
.name = "dma",
.id = 0,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA0,
}, {
.name = "dma",
.id = 1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA1,
}, {
.name = "dma",
.id = 2,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA2,
}, {
.name = "dma",
.id = 3,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA3,
}, {
.name = "dma",
.id = 4,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA4,
}, {
.name = "dma",
.id = 5,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
.name = "hsmmc",
.id = 1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_HSMMC,
}, {
.name = "gpio",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_GPIO,
}, {
.name = "usb-host",
.id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_USBH,
}, {
.name = "usb-device",
.id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_USBD,
}, {
.name = "lcd",
.id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_LCDC,
}, {
.name = "timers",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_PWMT,
}, {
.name = "cfc",
.id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_CFC,
}, {
.name = "ssmc",
.id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_SSMC,
}, {
.name = "uart",
.id = 0,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART0,
}, {
.name = "uart",
.id = 1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART1,
}, {
.name = "uart",
.id = 2,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART2,
}, {
.name = "uart",
.id = 3,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART3,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_RTC,
}, {
.name = "watchdog",
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C2443_PCLKCON_WDT,
}, {
.name = "ac97",
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C2443_PCLKCON_AC97,
}, {
.name = "nand",
.id = -1,
.parent = &clk_h,
}, {
.name = "usb-bus-host",
.id = -1,
.parent = &clk_usb_bus_host.clk,
}
};
static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
{
clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
return clkcon0 + 1;
}
/* EPLLCON compatible enough to get on/off information */
void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
fdiv_fn get_fdiv)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
struct clk *xtal_clk;
unsigned long xtal;
unsigned long pll;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
int ptr;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
pll = get_mpll(mpllcon, xtal);
clk_msysclk.clk.rate = pll;
fclk = pll / get_fdiv(clkdiv0);
hclk = s3c2443_prediv_getrate(&clk_prediv);
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
s3c24xx_setup_clocks(fclk, hclk, pclk);
printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
print_mhz(pll), print_mhz(fclk),
print_mhz(hclk), print_mhz(pclk));
for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
s3c_set_clksrc(&clksrc_clks[ptr], true);
/* ensure usb bus clock is within correct rate of 48MHz */
if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
}
printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
(epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
print_mhz(clk_get_rate(&clk_epll)),
print_mhz(clk_get_rate(&clk_usb_bus)));
}
static struct clk *clks[] __initdata = {
&clk_prediv,
&clk_mpllref,
&clk_mdivclk,
&clk_ext,
&clk_epll,
&clk_usb_bus,
};
static struct clksrc_clk *clksrcs[] __initdata = {
&clk_usb_bus_host,
&clk_epllref,
&clk_esysclk,
&clk_msysclk,
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
fdiv_fn get_fdiv)
{
int ptr;
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
clk_usb_bus.parent = &clk_usb_bus_host.clk;
clk_epll.parent = &clk_epllref.clk;
s3c24xx_register_baseclocks(xtal);
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
/* See s3c2443/etc notes on disabling clocks at init time */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c2443_common_setup_clocks(get_mpll, get_fdiv);
}