linux/drivers/hid/hid-steam.c
Rodrigo Rivas Costa 4bff980f92 HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
When creating the low-level hidraw device, the reference to steam_device
was stored using hid_set_drvdata(). But this value is not guaranteed to
be kept when set before calling probe. If this pointer is reset, it
crashes when opening the emulated hidraw device.

It looks like hid_set_drvdata() is for users "avobe" this hid_device,
while hid_device.driver_data it for users "below" this one.

In this case, we are creating a virtual hidraw device, so we must use
hid_device.driver_data.

Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-20 09:27:23 +02:00

1116 lines
31 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* HID driver for Valve Steam Controller
*
* Copyright (c) 2018 Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
*
* Supports both the wired and wireless interfaces.
*
* This controller has a builtin emulation of mouse and keyboard: the right pad
* can be used as a mouse, the shoulder buttons are mouse buttons, A and B
* buttons are ENTER and ESCAPE, and so on. This is implemented as additional
* HID interfaces.
*
* This is known as the "lizard mode", because apparently lizards like to use
* the computer from the coach, without a proper mouse and keyboard.
*
* This driver will disable the lizard mode when the input device is opened
* and re-enable it when the input device is closed, so as not to break user
* mode behaviour. The lizard_mode parameter can be used to change that.
*
* There are a few user space applications (notably Steam Client) that use
* the hidraw interface directly to create input devices (XTest, uinput...).
* In order to avoid breaking them this driver creates a layered hidraw device,
* so it can detect when the client is running and then:
* - it will not send any command to the controller.
* - this input device will be disabled, to avoid double input of the same
* user action.
*
* For additional functions, such as changing the right-pad margin or switching
* the led, you can use the user-space tool at:
*
* https://github.com/rodrigorc/steamctrl
*/
#include <linux/device.h>
#include <linux/input.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include <linux/delay.h>
#include <linux/power_supply.h>
#include "hid-ids.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>");
static bool lizard_mode = true;
static DEFINE_MUTEX(steam_devices_lock);
static LIST_HEAD(steam_devices);
#define STEAM_QUIRK_WIRELESS BIT(0)
/* Touch pads are 40 mm in diameter and 65535 units */
#define STEAM_PAD_RESOLUTION 1638
/* Trigger runs are about 5 mm and 256 units */
#define STEAM_TRIGGER_RESOLUTION 51
/* Joystick runs are about 5 mm and 256 units */
#define STEAM_JOYSTICK_RESOLUTION 51
#define STEAM_PAD_FUZZ 256
/*
* Commands that can be sent in a feature report.
* Thanks to Valve for some valuable hints.
*/
#define STEAM_CMD_SET_MAPPINGS 0x80
#define STEAM_CMD_CLEAR_MAPPINGS 0x81
#define STEAM_CMD_GET_MAPPINGS 0x82
#define STEAM_CMD_GET_ATTRIB 0x83
#define STEAM_CMD_GET_ATTRIB_LABEL 0x84
#define STEAM_CMD_DEFAULT_MAPPINGS 0x85
#define STEAM_CMD_FACTORY_RESET 0x86
#define STEAM_CMD_WRITE_REGISTER 0x87
#define STEAM_CMD_CLEAR_REGISTER 0x88
#define STEAM_CMD_READ_REGISTER 0x89
#define STEAM_CMD_GET_REGISTER_LABEL 0x8a
#define STEAM_CMD_GET_REGISTER_MAX 0x8b
#define STEAM_CMD_GET_REGISTER_DEFAULT 0x8c
#define STEAM_CMD_SET_MODE 0x8d
#define STEAM_CMD_DEFAULT_MOUSE 0x8e
#define STEAM_CMD_FORCEFEEDBAK 0x8f
#define STEAM_CMD_REQUEST_COMM_STATUS 0xb4
#define STEAM_CMD_GET_SERIAL 0xae
/* Some useful register ids */
#define STEAM_REG_LPAD_MODE 0x07
#define STEAM_REG_RPAD_MODE 0x08
#define STEAM_REG_RPAD_MARGIN 0x18
#define STEAM_REG_LED 0x2d
#define STEAM_REG_GYRO_MODE 0x30
/* Raw event identifiers */
#define STEAM_EV_INPUT_DATA 0x01
#define STEAM_EV_CONNECT 0x03
#define STEAM_EV_BATTERY 0x04
/* Values for GYRO_MODE (bitmask) */
#define STEAM_GYRO_MODE_OFF 0x0000
#define STEAM_GYRO_MODE_STEERING 0x0001
#define STEAM_GYRO_MODE_TILT 0x0002
#define STEAM_GYRO_MODE_SEND_ORIENTATION 0x0004
#define STEAM_GYRO_MODE_SEND_RAW_ACCEL 0x0008
#define STEAM_GYRO_MODE_SEND_RAW_GYRO 0x0010
/* Other random constants */
#define STEAM_SERIAL_LEN 10
struct steam_device {
struct list_head list;
spinlock_t lock;
struct hid_device *hdev, *client_hdev;
struct mutex mutex;
bool client_opened, input_opened;
struct input_dev __rcu *input;
unsigned long quirks;
struct work_struct work_connect;
bool connected;
char serial_no[STEAM_SERIAL_LEN + 1];
struct power_supply_desc battery_desc;
struct power_supply __rcu *battery;
u8 battery_charge;
u16 voltage;
};
static int steam_recv_report(struct steam_device *steam,
u8 *data, int size)
{
struct hid_report *r;
u8 *buf;
int ret;
r = steam->hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0];
if (hid_report_len(r) < 64)
return -EINVAL;
buf = hid_alloc_report_buf(r, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/*
* The report ID is always 0, so strip the first byte from the output.
* hid_report_len() is not counting the report ID, so +1 to the length
* or else we get a EOVERFLOW. We are safe from a buffer overflow
* because hid_alloc_report_buf() allocates +7 bytes.
*/
ret = hid_hw_raw_request(steam->hdev, 0x00,
buf, hid_report_len(r) + 1,
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret > 0)
memcpy(data, buf + 1, min(size, ret - 1));
kfree(buf);
return ret;
}
static int steam_send_report(struct steam_device *steam,
u8 *cmd, int size)
{
struct hid_report *r;
u8 *buf;
unsigned int retries = 50;
int ret;
r = steam->hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0];
if (hid_report_len(r) < 64)
return -EINVAL;
buf = hid_alloc_report_buf(r, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* The report ID is always 0 */
memcpy(buf + 1, cmd, size);
/*
* Sometimes the wireless controller fails with EPIPE
* when sending a feature report.
* Doing a HID_REQ_GET_REPORT and waiting for a while
* seems to fix that.
*/
do {
ret = hid_hw_raw_request(steam->hdev, 0,
buf, size + 1,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret != -EPIPE)
break;
msleep(20);
} while (--retries);
kfree(buf);
if (ret < 0)
hid_err(steam->hdev, "%s: error %d (%*ph)\n", __func__,
ret, size, cmd);
return ret;
}
static inline int steam_send_report_byte(struct steam_device *steam, u8 cmd)
{
return steam_send_report(steam, &cmd, 1);
}
static int steam_write_registers(struct steam_device *steam,
/* u8 reg, u16 val */...)
{
/* Send: 0x87 len (reg valLo valHi)* */
u8 reg;
u16 val;
u8 cmd[64] = {STEAM_CMD_WRITE_REGISTER, 0x00};
va_list args;
va_start(args, steam);
for (;;) {
reg = va_arg(args, int);
if (reg == 0)
break;
val = va_arg(args, int);
cmd[cmd[1] + 2] = reg;
cmd[cmd[1] + 3] = val & 0xff;
cmd[cmd[1] + 4] = val >> 8;
cmd[1] += 3;
}
va_end(args);
return steam_send_report(steam, cmd, 2 + cmd[1]);
}
static int steam_get_serial(struct steam_device *steam)
{
/*
* Send: 0xae 0x15 0x01
* Recv: 0xae 0x15 0x01 serialnumber (10 chars)
*/
int ret;
u8 cmd[] = {STEAM_CMD_GET_SERIAL, 0x15, 0x01};
u8 reply[3 + STEAM_SERIAL_LEN + 1];
ret = steam_send_report(steam, cmd, sizeof(cmd));
if (ret < 0)
return ret;
ret = steam_recv_report(steam, reply, sizeof(reply));
if (ret < 0)
return ret;
if (reply[0] != 0xae || reply[1] != 0x15 || reply[2] != 0x01)
return -EIO;
reply[3 + STEAM_SERIAL_LEN] = 0;
strlcpy(steam->serial_no, reply + 3, sizeof(steam->serial_no));
return 0;
}
/*
* This command requests the wireless adaptor to post an event
* with the connection status. Useful if this driver is loaded when
* the controller is already connected.
*/
static inline int steam_request_conn_status(struct steam_device *steam)
{
return steam_send_report_byte(steam, STEAM_CMD_REQUEST_COMM_STATUS);
}
static void steam_set_lizard_mode(struct steam_device *steam, bool enable)
{
if (enable) {
/* enable esc, enter, cursors */
steam_send_report_byte(steam, STEAM_CMD_DEFAULT_MAPPINGS);
/* enable mouse */
steam_send_report_byte(steam, STEAM_CMD_DEFAULT_MOUSE);
steam_write_registers(steam,
STEAM_REG_RPAD_MARGIN, 0x01, /* enable margin */
0);
} else {
/* disable esc, enter, cursor */
steam_send_report_byte(steam, STEAM_CMD_CLEAR_MAPPINGS);
steam_write_registers(steam,
STEAM_REG_RPAD_MODE, 0x07, /* disable mouse */
STEAM_REG_RPAD_MARGIN, 0x00, /* disable margin */
0);
}
}
static void steam_update_lizard_mode(struct steam_device *steam)
{
mutex_lock(&steam->mutex);
if (!steam->client_opened) {
if (steam->input_opened)
steam_set_lizard_mode(steam, false);
else
steam_set_lizard_mode(steam, lizard_mode);
}
mutex_unlock(&steam->mutex);
}
static int steam_input_open(struct input_dev *dev)
{
struct steam_device *steam = input_get_drvdata(dev);
int ret;
ret = hid_hw_open(steam->hdev);
if (ret)
return ret;
mutex_lock(&steam->mutex);
steam->input_opened = true;
if (!steam->client_opened && lizard_mode)
steam_set_lizard_mode(steam, false);
mutex_unlock(&steam->mutex);
return 0;
}
static void steam_input_close(struct input_dev *dev)
{
struct steam_device *steam = input_get_drvdata(dev);
mutex_lock(&steam->mutex);
steam->input_opened = false;
if (!steam->client_opened && lizard_mode)
steam_set_lizard_mode(steam, true);
mutex_unlock(&steam->mutex);
hid_hw_close(steam->hdev);
}
static enum power_supply_property steam_battery_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CAPACITY,
};
static int steam_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct steam_device *steam = power_supply_get_drvdata(psy);
unsigned long flags;
s16 volts;
u8 batt;
int ret = 0;
spin_lock_irqsave(&steam->lock, flags);
volts = steam->voltage;
batt = steam->battery_charge;
spin_unlock_irqrestore(&steam->lock, flags);
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
val->intval = 1;
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = volts * 1000; /* mV -> uV */
break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = batt;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int steam_battery_register(struct steam_device *steam)
{
struct power_supply *battery;
struct power_supply_config battery_cfg = { .drv_data = steam, };
unsigned long flags;
int ret;
steam->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY;
steam->battery_desc.properties = steam_battery_props;
steam->battery_desc.num_properties = ARRAY_SIZE(steam_battery_props);
steam->battery_desc.get_property = steam_battery_get_property;
steam->battery_desc.name = devm_kasprintf(&steam->hdev->dev,
GFP_KERNEL, "steam-controller-%s-battery",
steam->serial_no);
if (!steam->battery_desc.name)
return -ENOMEM;
/* avoid the warning of 0% battery while waiting for the first info */
spin_lock_irqsave(&steam->lock, flags);
steam->voltage = 3000;
steam->battery_charge = 100;
spin_unlock_irqrestore(&steam->lock, flags);
battery = power_supply_register(&steam->hdev->dev,
&steam->battery_desc, &battery_cfg);
if (IS_ERR(battery)) {
ret = PTR_ERR(battery);
hid_err(steam->hdev,
"%s:power_supply_register failed with error %d\n",
__func__, ret);
return ret;
}
rcu_assign_pointer(steam->battery, battery);
power_supply_powers(battery, &steam->hdev->dev);
return 0;
}
static int steam_register(struct steam_device *steam)
{
struct hid_device *hdev = steam->hdev;
struct input_dev *input;
int ret;
rcu_read_lock();
input = rcu_dereference(steam->input);
rcu_read_unlock();
if (input) {
dbg_hid("%s: already connected\n", __func__);
return 0;
}
/*
* Unlikely, but getting the serial could fail, and it is not so
* important, so make up a serial number and go on.
*/
if (steam_get_serial(steam) < 0)
strlcpy(steam->serial_no, "XXXXXXXXXX",
sizeof(steam->serial_no));
hid_info(hdev, "Steam Controller '%s' connected",
steam->serial_no);
input = input_allocate_device();
if (!input)
return -ENOMEM;
input_set_drvdata(input, steam);
input->dev.parent = &hdev->dev;
input->open = steam_input_open;
input->close = steam_input_close;
input->name = (steam->quirks & STEAM_QUIRK_WIRELESS) ?
"Wireless Steam Controller" :
"Steam Controller";
input->phys = hdev->phys;
input->uniq = steam->serial_no;
input->id.bustype = hdev->bus;
input->id.vendor = hdev->vendor;
input->id.product = hdev->product;
input->id.version = hdev->version;
input_set_capability(input, EV_KEY, BTN_TR2);
input_set_capability(input, EV_KEY, BTN_TL2);
input_set_capability(input, EV_KEY, BTN_TR);
input_set_capability(input, EV_KEY, BTN_TL);
input_set_capability(input, EV_KEY, BTN_Y);
input_set_capability(input, EV_KEY, BTN_B);
input_set_capability(input, EV_KEY, BTN_X);
input_set_capability(input, EV_KEY, BTN_A);
input_set_capability(input, EV_KEY, BTN_DPAD_UP);
input_set_capability(input, EV_KEY, BTN_DPAD_RIGHT);
input_set_capability(input, EV_KEY, BTN_DPAD_LEFT);
input_set_capability(input, EV_KEY, BTN_DPAD_DOWN);
input_set_capability(input, EV_KEY, BTN_SELECT);
input_set_capability(input, EV_KEY, BTN_MODE);
input_set_capability(input, EV_KEY, BTN_START);
input_set_capability(input, EV_KEY, BTN_GEAR_DOWN);
input_set_capability(input, EV_KEY, BTN_GEAR_UP);
input_set_capability(input, EV_KEY, BTN_THUMBR);
input_set_capability(input, EV_KEY, BTN_THUMBL);
input_set_capability(input, EV_KEY, BTN_THUMB);
input_set_capability(input, EV_KEY, BTN_THUMB2);
input_set_abs_params(input, ABS_HAT2Y, 0, 255, 0, 0);
input_set_abs_params(input, ABS_HAT2X, 0, 255, 0, 0);
input_set_abs_params(input, ABS_X, -32767, 32767, 0, 0);
input_set_abs_params(input, ABS_Y, -32767, 32767, 0, 0);
input_set_abs_params(input, ABS_RX, -32767, 32767,
STEAM_PAD_FUZZ, 0);
input_set_abs_params(input, ABS_RY, -32767, 32767,
STEAM_PAD_FUZZ, 0);
input_set_abs_params(input, ABS_HAT0X, -32767, 32767,
STEAM_PAD_FUZZ, 0);
input_set_abs_params(input, ABS_HAT0Y, -32767, 32767,
STEAM_PAD_FUZZ, 0);
input_abs_set_res(input, ABS_X, STEAM_JOYSTICK_RESOLUTION);
input_abs_set_res(input, ABS_Y, STEAM_JOYSTICK_RESOLUTION);
input_abs_set_res(input, ABS_RX, STEAM_PAD_RESOLUTION);
input_abs_set_res(input, ABS_RY, STEAM_PAD_RESOLUTION);
input_abs_set_res(input, ABS_HAT0X, STEAM_PAD_RESOLUTION);
input_abs_set_res(input, ABS_HAT0Y, STEAM_PAD_RESOLUTION);
input_abs_set_res(input, ABS_HAT2Y, STEAM_TRIGGER_RESOLUTION);
input_abs_set_res(input, ABS_HAT2X, STEAM_TRIGGER_RESOLUTION);
ret = input_register_device(input);
if (ret)
goto input_register_fail;
rcu_assign_pointer(steam->input, input);
/* ignore battery errors, we can live without it */
if (steam->quirks & STEAM_QUIRK_WIRELESS)
steam_battery_register(steam);
return 0;
input_register_fail:
input_free_device(input);
return ret;
}
static void steam_unregister(struct steam_device *steam)
{
struct input_dev *input;
struct power_supply *battery;
rcu_read_lock();
input = rcu_dereference(steam->input);
battery = rcu_dereference(steam->battery);
rcu_read_unlock();
if (battery) {
RCU_INIT_POINTER(steam->battery, NULL);
synchronize_rcu();
power_supply_unregister(battery);
}
if (input) {
RCU_INIT_POINTER(steam->input, NULL);
synchronize_rcu();
hid_info(steam->hdev, "Steam Controller '%s' disconnected",
steam->serial_no);
input_unregister_device(input);
}
}
static void steam_work_connect_cb(struct work_struct *work)
{
struct steam_device *steam = container_of(work, struct steam_device,
work_connect);
unsigned long flags;
bool connected;
int ret;
spin_lock_irqsave(&steam->lock, flags);
connected = steam->connected;
spin_unlock_irqrestore(&steam->lock, flags);
if (connected) {
ret = steam_register(steam);
if (ret) {
hid_err(steam->hdev,
"%s:steam_register failed with error %d\n",
__func__, ret);
}
} else {
steam_unregister(steam);
}
}
static bool steam_is_valve_interface(struct hid_device *hdev)
{
struct hid_report_enum *rep_enum;
/*
* The wired device creates 3 interfaces:
* 0: emulated mouse.
* 1: emulated keyboard.
* 2: the real game pad.
* The wireless device creates 5 interfaces:
* 0: emulated keyboard.
* 1-4: slots where up to 4 real game pads will be connected to.
* We know which one is the real gamepad interface because they are the
* only ones with a feature report.
*/
rep_enum = &hdev->report_enum[HID_FEATURE_REPORT];
return !list_empty(&rep_enum->report_list);
}
static int steam_client_ll_parse(struct hid_device *hdev)
{
struct steam_device *steam = hdev->driver_data;
return hid_parse_report(hdev, steam->hdev->dev_rdesc,
steam->hdev->dev_rsize);
}
static int steam_client_ll_start(struct hid_device *hdev)
{
return 0;
}
static void steam_client_ll_stop(struct hid_device *hdev)
{
}
static int steam_client_ll_open(struct hid_device *hdev)
{
struct steam_device *steam = hdev->driver_data;
int ret;
ret = hid_hw_open(steam->hdev);
if (ret)
return ret;
mutex_lock(&steam->mutex);
steam->client_opened = true;
mutex_unlock(&steam->mutex);
return ret;
}
static void steam_client_ll_close(struct hid_device *hdev)
{
struct steam_device *steam = hdev->driver_data;
mutex_lock(&steam->mutex);
steam->client_opened = false;
if (steam->input_opened)
steam_set_lizard_mode(steam, false);
else
steam_set_lizard_mode(steam, lizard_mode);
mutex_unlock(&steam->mutex);
hid_hw_close(steam->hdev);
}
static int steam_client_ll_raw_request(struct hid_device *hdev,
unsigned char reportnum, u8 *buf,
size_t count, unsigned char report_type,
int reqtype)
{
struct steam_device *steam = hdev->driver_data;
return hid_hw_raw_request(steam->hdev, reportnum, buf, count,
report_type, reqtype);
}
static struct hid_ll_driver steam_client_ll_driver = {
.parse = steam_client_ll_parse,
.start = steam_client_ll_start,
.stop = steam_client_ll_stop,
.open = steam_client_ll_open,
.close = steam_client_ll_close,
.raw_request = steam_client_ll_raw_request,
};
static struct hid_device *steam_create_client_hid(struct hid_device *hdev)
{
struct hid_device *client_hdev;
client_hdev = hid_allocate_device();
if (IS_ERR(client_hdev))
return client_hdev;
client_hdev->ll_driver = &steam_client_ll_driver;
client_hdev->dev.parent = hdev->dev.parent;
client_hdev->bus = hdev->bus;
client_hdev->vendor = hdev->vendor;
client_hdev->product = hdev->product;
client_hdev->version = hdev->version;
client_hdev->type = hdev->type;
client_hdev->country = hdev->country;
strlcpy(client_hdev->name, hdev->name,
sizeof(client_hdev->name));
strlcpy(client_hdev->phys, hdev->phys,
sizeof(client_hdev->phys));
/*
* Since we use the same device info than the real interface to
* trick userspace, we will be calling steam_probe recursively.
* We need to recognize the client interface somehow.
*/
client_hdev->group = HID_GROUP_STEAM;
return client_hdev;
}
static int steam_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
struct steam_device *steam;
int ret;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev,
"%s:parse of hid interface failed\n", __func__);
return ret;
}
/*
* The virtual client_dev is only used for hidraw.
* Also avoid the recursive probe.
*/
if (hdev->group == HID_GROUP_STEAM)
return hid_hw_start(hdev, HID_CONNECT_HIDRAW);
/*
* The non-valve interfaces (mouse and keyboard emulation) are
* connected without changes.
*/
if (!steam_is_valve_interface(hdev))
return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
steam = devm_kzalloc(&hdev->dev, sizeof(*steam), GFP_KERNEL);
if (!steam) {
ret = -ENOMEM;
goto steam_alloc_fail;
}
steam->hdev = hdev;
hid_set_drvdata(hdev, steam);
spin_lock_init(&steam->lock);
mutex_init(&steam->mutex);
steam->quirks = id->driver_data;
INIT_WORK(&steam->work_connect, steam_work_connect_cb);
steam->client_hdev = steam_create_client_hid(hdev);
if (IS_ERR(steam->client_hdev)) {
ret = PTR_ERR(steam->client_hdev);
goto client_hdev_fail;
}
steam->client_hdev->driver_data = steam;
/*
* With the real steam controller interface, do not connect hidraw.
* Instead, create the client_hid and connect that.
*/
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDRAW);
if (ret)
goto hid_hw_start_fail;
ret = hid_add_device(steam->client_hdev);
if (ret)
goto client_hdev_add_fail;
if (steam->quirks & STEAM_QUIRK_WIRELESS) {
ret = hid_hw_open(hdev);
if (ret) {
hid_err(hdev,
"%s:hid_hw_open for wireless\n",
__func__);
goto hid_hw_open_fail;
}
hid_info(hdev, "Steam wireless receiver connected");
steam_request_conn_status(steam);
} else {
ret = steam_register(steam);
if (ret) {
hid_err(hdev,
"%s:steam_register failed with error %d\n",
__func__, ret);
goto input_register_fail;
}
}
mutex_lock(&steam_devices_lock);
steam_update_lizard_mode(steam);
list_add(&steam->list, &steam_devices);
mutex_unlock(&steam_devices_lock);
return 0;
hid_hw_open_fail:
input_register_fail:
client_hdev_add_fail:
hid_hw_stop(hdev);
hid_hw_start_fail:
hid_destroy_device(steam->client_hdev);
client_hdev_fail:
cancel_work_sync(&steam->work_connect);
steam_alloc_fail:
hid_err(hdev, "%s: failed with error %d\n",
__func__, ret);
return ret;
}
static void steam_remove(struct hid_device *hdev)
{
struct steam_device *steam = hid_get_drvdata(hdev);
if (!steam || hdev->group == HID_GROUP_STEAM) {
hid_hw_stop(hdev);
return;
}
mutex_lock(&steam_devices_lock);
list_del(&steam->list);
mutex_unlock(&steam_devices_lock);
hid_destroy_device(steam->client_hdev);
steam->client_opened = false;
cancel_work_sync(&steam->work_connect);
if (steam->quirks & STEAM_QUIRK_WIRELESS) {
hid_info(hdev, "Steam wireless receiver disconnected");
hid_hw_close(hdev);
}
hid_hw_stop(hdev);
steam_unregister(steam);
}
static void steam_do_connect_event(struct steam_device *steam, bool connected)
{
unsigned long flags;
spin_lock_irqsave(&steam->lock, flags);
steam->connected = connected;
spin_unlock_irqrestore(&steam->lock, flags);
if (schedule_work(&steam->work_connect) == 0)
dbg_hid("%s: connected=%d event already queued\n",
__func__, connected);
}
/*
* Some input data in the protocol has the opposite sign.
* Clamp the values to 32767..-32767 so that the range is
* symmetrical and can be negated safely.
*/
static inline s16 steam_le16(u8 *data)
{
s16 x = (s16) le16_to_cpup((__le16 *)data);
return x == -32768 ? -32767 : x;
}
/*
* The size for this message payload is 60.
* The known values are:
* (* values are not sent through wireless)
* (* accelerator/gyro is disabled by default)
* Offset| Type | Mapped to |Meaning
* -------+-------+-----------+--------------------------
* 4-7 | u32 | -- | sequence number
* 8-10 | 24bit | see below | buttons
* 11 | u8 | ABS_HAT2Y | left trigger
* 12 | u8 | ABS_HAT2X | right trigger
* 13-15 | -- | -- | always 0
* 16-17 | s16 | ABS_X/ABS_HAT0X | X value
* 18-19 | s16 | ABS_Y/ABS_HAT0Y | Y value
* 20-21 | s16 | ABS_RX | right-pad X value
* 22-23 | s16 | ABS_RY | right-pad Y value
* 24-25 | s16 | -- | * left trigger
* 26-27 | s16 | -- | * right trigger
* 28-29 | s16 | -- | * accelerometer X value
* 30-31 | s16 | -- | * accelerometer Y value
* 32-33 | s16 | -- | * accelerometer Z value
* 34-35 | s16 | -- | gyro X value
* 36-36 | s16 | -- | gyro Y value
* 38-39 | s16 | -- | gyro Z value
* 40-41 | s16 | -- | quaternion W value
* 42-43 | s16 | -- | quaternion X value
* 44-45 | s16 | -- | quaternion Y value
* 46-47 | s16 | -- | quaternion Z value
* 48-49 | -- | -- | always 0
* 50-51 | s16 | -- | * left trigger (uncalibrated)
* 52-53 | s16 | -- | * right trigger (uncalibrated)
* 54-55 | s16 | -- | * joystick X value (uncalibrated)
* 56-57 | s16 | -- | * joystick Y value (uncalibrated)
* 58-59 | s16 | -- | * left-pad X value
* 60-61 | s16 | -- | * left-pad Y value
* 62-63 | u16 | -- | * battery voltage
*
* The buttons are:
* Bit | Mapped to | Description
* ------+------------+--------------------------------
* 8.0 | BTN_TR2 | right trigger fully pressed
* 8.1 | BTN_TL2 | left trigger fully pressed
* 8.2 | BTN_TR | right shoulder
* 8.3 | BTN_TL | left shoulder
* 8.4 | BTN_Y | button Y
* 8.5 | BTN_B | button B
* 8.6 | BTN_X | button X
* 8.7 | BTN_A | button A
* 9.0 | BTN_DPAD_UP | lef-pad up
* 9.1 | BTN_DPAD_RIGHT | lef-pad right
* 9.2 | BTN_DPAD_LEFT | lef-pad left
* 9.3 | BTN_DPAD_DOWN | lef-pad down
* 9.4 | BTN_SELECT | menu left
* 9.5 | BTN_MODE | steam logo
* 9.6 | BTN_START | menu right
* 9.7 | BTN_GEAR_DOWN | left back lever
* 10.0 | BTN_GEAR_UP | right back lever
* 10.1 | -- | left-pad clicked
* 10.2 | BTN_THUMBR | right-pad clicked
* 10.3 | BTN_THUMB | left-pad touched (but see explanation below)
* 10.4 | BTN_THUMB2 | right-pad touched
* 10.5 | -- | unknown
* 10.6 | BTN_THUMBL | joystick clicked
* 10.7 | -- | lpad_and_joy
*/
static void steam_do_input_event(struct steam_device *steam,
struct input_dev *input, u8 *data)
{
/* 24 bits of buttons */
u8 b8, b9, b10;
s16 x, y;
bool lpad_touched, lpad_and_joy;
b8 = data[8];
b9 = data[9];
b10 = data[10];
input_report_abs(input, ABS_HAT2Y, data[11]);
input_report_abs(input, ABS_HAT2X, data[12]);
/*
* These two bits tells how to interpret the values X and Y.
* lpad_and_joy tells that the joystick and the lpad are used at the
* same time.
* lpad_touched tells whether X/Y are to be read as lpad coord or
* joystick values.
* (lpad_touched || lpad_and_joy) tells if the lpad is really touched.
*/
lpad_touched = b10 & BIT(3);
lpad_and_joy = b10 & BIT(7);
x = steam_le16(data + 16);
y = -steam_le16(data + 18);
input_report_abs(input, lpad_touched ? ABS_HAT0X : ABS_X, x);
input_report_abs(input, lpad_touched ? ABS_HAT0Y : ABS_Y, y);
/* Check if joystick is centered */
if (lpad_touched && !lpad_and_joy) {
input_report_abs(input, ABS_X, 0);
input_report_abs(input, ABS_Y, 0);
}
/* Check if lpad is untouched */
if (!(lpad_touched || lpad_and_joy)) {
input_report_abs(input, ABS_HAT0X, 0);
input_report_abs(input, ABS_HAT0Y, 0);
}
input_report_abs(input, ABS_RX, steam_le16(data + 20));
input_report_abs(input, ABS_RY, -steam_le16(data + 22));
input_event(input, EV_KEY, BTN_TR2, !!(b8 & BIT(0)));
input_event(input, EV_KEY, BTN_TL2, !!(b8 & BIT(1)));
input_event(input, EV_KEY, BTN_TR, !!(b8 & BIT(2)));
input_event(input, EV_KEY, BTN_TL, !!(b8 & BIT(3)));
input_event(input, EV_KEY, BTN_Y, !!(b8 & BIT(4)));
input_event(input, EV_KEY, BTN_B, !!(b8 & BIT(5)));
input_event(input, EV_KEY, BTN_X, !!(b8 & BIT(6)));
input_event(input, EV_KEY, BTN_A, !!(b8 & BIT(7)));
input_event(input, EV_KEY, BTN_SELECT, !!(b9 & BIT(4)));
input_event(input, EV_KEY, BTN_MODE, !!(b9 & BIT(5)));
input_event(input, EV_KEY, BTN_START, !!(b9 & BIT(6)));
input_event(input, EV_KEY, BTN_GEAR_DOWN, !!(b9 & BIT(7)));
input_event(input, EV_KEY, BTN_GEAR_UP, !!(b10 & BIT(0)));
input_event(input, EV_KEY, BTN_THUMBR, !!(b10 & BIT(2)));
input_event(input, EV_KEY, BTN_THUMBL, !!(b10 & BIT(6)));
input_event(input, EV_KEY, BTN_THUMB, lpad_touched || lpad_and_joy);
input_event(input, EV_KEY, BTN_THUMB2, !!(b10 & BIT(4)));
input_event(input, EV_KEY, BTN_DPAD_UP, !!(b9 & BIT(0)));
input_event(input, EV_KEY, BTN_DPAD_RIGHT, !!(b9 & BIT(1)));
input_event(input, EV_KEY, BTN_DPAD_LEFT, !!(b9 & BIT(2)));
input_event(input, EV_KEY, BTN_DPAD_DOWN, !!(b9 & BIT(3)));
input_sync(input);
}
/*
* The size for this message payload is 11.
* The known values are:
* Offset| Type | Meaning
* -------+-------+---------------------------
* 4-7 | u32 | sequence number
* 8-11 | -- | always 0
* 12-13 | u16 | voltage (mV)
* 14 | u8 | battery percent
*/
static void steam_do_battery_event(struct steam_device *steam,
struct power_supply *battery, u8 *data)
{
unsigned long flags;
s16 volts = steam_le16(data + 12);
u8 batt = data[14];
/* Creating the battery may have failed */
rcu_read_lock();
battery = rcu_dereference(steam->battery);
if (likely(battery)) {
spin_lock_irqsave(&steam->lock, flags);
steam->voltage = volts;
steam->battery_charge = batt;
spin_unlock_irqrestore(&steam->lock, flags);
power_supply_changed(battery);
}
rcu_read_unlock();
}
static int steam_raw_event(struct hid_device *hdev,
struct hid_report *report, u8 *data,
int size)
{
struct steam_device *steam = hid_get_drvdata(hdev);
struct input_dev *input;
struct power_supply *battery;
if (!steam)
return 0;
if (steam->client_opened)
hid_input_report(steam->client_hdev, HID_FEATURE_REPORT,
data, size, 0);
/*
* All messages are size=64, all values little-endian.
* The format is:
* Offset| Meaning
* -------+--------------------------------------------
* 0-1 | always 0x01, 0x00, maybe protocol version?
* 2 | type of message
* 3 | length of the real payload (not checked)
* 4-n | payload data, depends on the type
*
* There are these known types of message:
* 0x01: input data (60 bytes)
* 0x03: wireless connect/disconnect (1 byte)
* 0x04: battery status (11 bytes)
*/
if (size != 64 || data[0] != 1 || data[1] != 0)
return 0;
switch (data[2]) {
case STEAM_EV_INPUT_DATA:
if (steam->client_opened)
return 0;
rcu_read_lock();
input = rcu_dereference(steam->input);
if (likely(input)) {
steam_do_input_event(steam, input, data);
} else {
dbg_hid("%s: input data without connect event\n",
__func__);
steam_do_connect_event(steam, true);
}
rcu_read_unlock();
break;
case STEAM_EV_CONNECT:
/*
* The payload of this event is a single byte:
* 0x01: disconnected.
* 0x02: connected.
*/
switch (data[4]) {
case 0x01:
steam_do_connect_event(steam, false);
break;
case 0x02:
steam_do_connect_event(steam, true);
break;
}
break;
case STEAM_EV_BATTERY:
if (steam->quirks & STEAM_QUIRK_WIRELESS) {
rcu_read_lock();
battery = rcu_dereference(steam->battery);
if (likely(battery)) {
steam_do_battery_event(steam, battery, data);
} else {
dbg_hid(
"%s: battery data without connect event\n",
__func__);
steam_do_connect_event(steam, true);
}
rcu_read_unlock();
}
break;
}
return 0;
}
static int steam_param_set_lizard_mode(const char *val,
const struct kernel_param *kp)
{
struct steam_device *steam;
int ret;
ret = param_set_bool(val, kp);
if (ret)
return ret;
mutex_lock(&steam_devices_lock);
list_for_each_entry(steam, &steam_devices, list) {
steam_update_lizard_mode(steam);
}
mutex_unlock(&steam_devices_lock);
return 0;
}
static const struct kernel_param_ops steam_lizard_mode_ops = {
.set = steam_param_set_lizard_mode,
.get = param_get_bool,
};
module_param_cb(lizard_mode, &steam_lizard_mode_ops, &lizard_mode, 0644);
MODULE_PARM_DESC(lizard_mode,
"Enable mouse and keyboard emulation (lizard mode) when the gamepad is not in use");
static const struct hid_device_id steam_controllers[] = {
{ /* Wired Steam Controller */
HID_USB_DEVICE(USB_VENDOR_ID_VALVE,
USB_DEVICE_ID_STEAM_CONTROLLER)
},
{ /* Wireless Steam Controller */
HID_USB_DEVICE(USB_VENDOR_ID_VALVE,
USB_DEVICE_ID_STEAM_CONTROLLER_WIRELESS),
.driver_data = STEAM_QUIRK_WIRELESS
},
{}
};
MODULE_DEVICE_TABLE(hid, steam_controllers);
static struct hid_driver steam_controller_driver = {
.name = "hid-steam",
.id_table = steam_controllers,
.probe = steam_probe,
.remove = steam_remove,
.raw_event = steam_raw_event,
};
module_hid_driver(steam_controller_driver);