linux/net/mac80211/pm.c
Aditya Kumar Singh bca8bc0399 wifi: mac80211: handle ieee80211_radar_detected() for MLO
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.

Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.

Hence, in order to support DFS with MLO, do the following changes -
  * Add channel context conf pointer as an argument to the function
    ieee80211_radar_detected(). During MLO, drivers would have to pass on
    which channel context conf radar is detected. Otherwise, drivers could
    just pass NULL.
  * ieee80211_radar_detected() will iterate over all channel contexts
    present and
  	* if channel context conf is passed, only mark that as radar
  	  detected
  	* if NULL is passed, then mark all channel contexts as radar
  	  detected
  	* Then as usual, schedule the radar detected work.
  * In the worker, go over all the contexts again and for all such context
    which is marked with radar detected, cancel the ongoing CAC by calling
    ieee80211_dfs_cac_cancel() and then notify cfg80211 via
    cfg80211_radar_event().
  * To cancel the CAC, pass the channel context as well where radar is
    detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
    canceled only on the links using the provided context, leaving other
    links unaffected.

This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06 13:01:05 +02:00

201 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Portions
* Copyright (C) 2020-2021, 2023-2024 Intel Corporation
*/
#include <net/mac80211.h>
#include <net/rtnetlink.h>
#include "ieee80211_i.h"
#include "mesh.h"
#include "driver-ops.h"
#include "led.h"
static void ieee80211_sched_scan_cancel(struct ieee80211_local *local)
{
if (ieee80211_request_sched_scan_stop(local))
return;
cfg80211_sched_scan_stopped_locked(local->hw.wiphy, 0);
}
int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
if (!local->open_count)
goto suspend;
local->suspending = true;
mb(); /* make suspending visible before any cancellation */
ieee80211_scan_cancel(local);
ieee80211_dfs_cac_cancel(local, NULL);
ieee80211_roc_purge(local, NULL);
ieee80211_del_virtual_monitor(local);
if (ieee80211_hw_check(hw, AMPDU_AGGREGATION) &&
!(wowlan && wowlan->any)) {
lockdep_assert_wiphy(local->hw.wiphy);
list_for_each_entry(sta, &local->sta_list, list) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(
sta, AGG_STOP_LOCAL_REQUEST);
}
}
/* keep sched_scan only in case of 'any' trigger */
if (!(wowlan && wowlan->any))
ieee80211_sched_scan_cancel(local);
ieee80211_stop_queues_by_reason(hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
false);
/* flush out all packets */
synchronize_net();
ieee80211_flush_queues(local, NULL, true);
local->quiescing = true;
/* make quiescing visible to timers everywhere */
mb();
flush_workqueue(local->workqueue);
/* Don't try to run timers while suspended. */
del_timer_sync(&local->sta_cleanup);
/*
* Note that this particular timer doesn't need to be
* restarted at resume.
*/
wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work);
del_timer_sync(&local->dynamic_ps_timer);
local->wowlan = wowlan;
if (local->wowlan) {
int err;
/* Drivers don't expect to suspend while some operations like
* authenticating or associating are in progress. It doesn't
* make sense anyway to accept that, since the authentication
* or association would never finish since the driver can't do
* that on its own.
* Thus, clean up in-progress auth/assoc first.
*/
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type != NL80211_IFTYPE_STATION)
continue;
ieee80211_mgd_quiesce(sdata);
/* If suspended during TX in progress, and wowlan
* is enabled (connection will be active) there
* can be a race where the driver is put out
* of power-save due to TX and during suspend
* dynamic_ps_timer is cancelled and TX packet
* is flushed, leaving the driver in ACTIVE even
* after resuming until dynamic_ps_timer puts
* driver back in DOZE.
*/
if (sdata->u.mgd.associated &&
sdata->u.mgd.powersave &&
!(local->hw.conf.flags & IEEE80211_CONF_PS)) {
local->hw.conf.flags |= IEEE80211_CONF_PS;
ieee80211_hw_config(local,
IEEE80211_CONF_CHANGE_PS);
}
}
err = drv_suspend(local, wowlan);
if (err < 0) {
local->quiescing = false;
local->wowlan = false;
if (ieee80211_hw_check(hw, AMPDU_AGGREGATION)) {
lockdep_assert_wiphy(local->hw.wiphy);
list_for_each_entry(sta,
&local->sta_list, list) {
clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
}
}
ieee80211_wake_queues_by_reason(hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
false);
return err;
} else if (err > 0) {
WARN_ON(err != 1);
/* cfg80211 will call back into mac80211 to disconnect
* all interfaces, allow that to proceed properly
*/
ieee80211_wake_queues_by_reason(hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
false);
return err;
} else {
goto suspend;
}
}
/* remove all interfaces that were created in the driver */
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
continue;
case NL80211_IFTYPE_STATION:
ieee80211_mgd_quiesce(sdata);
break;
default:
break;
}
wiphy_delayed_work_flush(local->hw.wiphy,
&sdata->dec_tailroom_needed_wk);
drv_remove_interface(local, sdata);
}
/*
* We disconnected on all interfaces before suspend, all channel
* contexts should be released.
*/
WARN_ON(!list_empty(&local->chanctx_list));
/* stop hardware - this must stop RX */
ieee80211_stop_device(local, true);
suspend:
local->suspended = true;
/* need suspended to be visible before quiescing is false */
barrier();
local->quiescing = false;
local->suspending = false;
return 0;
}
/*
* __ieee80211_resume() is a static inline which just calls
* ieee80211_reconfig(), which is also needed for hardware
* hang/firmware failure/etc. recovery.
*/
void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
struct cfg80211_wowlan_wakeup *wakeup,
gfp_t gfp)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp);
}
EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup);